Android平台屏幕/摄像头或外部数据采集及RTMP推送接口设计描述

好多开发者提到，为什么大牛直播SDK的Android平台RTMP推送接口怎么这么多？不像一些开源或者商业RTMP推送一样，就几个接口，简单明了。

不解释，以Android平台RTMP推送模块常用接口，看看这些接口有没有存在的意义？本文简单介绍，全当抛砖引玉，相关资料，可参考 Github：

1. 初始化Publisher接口，返回推送实例句柄：

 /*** Open publisher(启动推送实例)** @param ctx: get by this.getApplicationContext()* * @param audio_opt:* if 0: 不推送音频* if 1: 推送编码前音频(PCM)* if 2: 推送编码后音频(aac/pcma/pcmu/speex).* * @param video_opt:* if 0: 不推送视频* if 1: 推送编码前视频(YUV420SP/YUV420P/RGBA/ARGB)* if 2: 推送编码后视频(H.264)** @param width: capture width; height: capture height.** <pre>This function must be called firstly.</pre>** @return the handle of publisher instance*/public native long SmartPublisherOpen(Object ctx, int audio_opt, int video_opt,  int width, int height);

2. 相关Event事件回调，如网络状态、实时快照、录像状态等回调：

  /*** Set callback event(设置事件回调)* * @param callbackv2: callback function* * @return {0} if successful*/public native int SetSmartPublisherEventCallbackV2(long handle, NTSmartEventCallbackV2 callbackv2);

    class EventHandeV2 implements NTSmartEventCallbackV2 {@Overridepublic void onNTSmartEventCallbackV2(long handle, int id, long param1, long param2, String param3, String param4, Object param5) {Log.i(TAG, "EventHandeV2: handle=" + handle + " id:" + id);String publisher_event = "";switch (id) {case NTSmartEventID.EVENT_DANIULIVE_ERC_PUBLISHER_STARTED:publisher_event = "开始..";break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PUBLISHER_CONNECTING:publisher_event = "连接中..";break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PUBLISHER_CONNECTION_FAILED:publisher_event = "连接失败..";break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PUBLISHER_CONNECTED:publisher_event = "连接成功..";break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PUBLISHER_DISCONNECTED:publisher_event = "连接断开..";break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PUBLISHER_STOP:publisher_event = "关闭..";break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PUBLISHER_RECORDER_START_NEW_FILE:publisher_event = "开始一个新的录像文件 : " + param3;break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PUBLISHER_ONE_RECORDER_FILE_FINISHED:publisher_event = "已生成一个录像文件 : " + param3;break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PUBLISHER_SEND_DELAY:publisher_event = "发送时延: " + param1 + " 帧数:" + param2;break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PUBLISHER_CAPTURE_IMAGE:publisher_event = "快照: " + param1 + " 路径：" + param3;if (param1 == 0) {publisher_event = publisher_event + "截取快照成功..";} else {publisher_event = publisher_event + "截取快照失败..";}break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PUBLISHER_RTSP_URL:publisher_event = "RTSP服务URL: " + param3;break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PUSH_RTSP_SERVER_RESPONSE_STATUS_CODE:publisher_event ="RTSP status code received, codeID: " + param1 + ", RTSP URL: " + param3;break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PUSH_RTSP_SERVER_NOT_SUPPORT:publisher_event ="服务器不支持RTSP推送, 推送的RTSP URL: " + param3;break;}String str = "当前回调状态：" + publisher_event;Log.i(TAG, str);Message message = new Message();message.what = PUBLISHER_EVENT_MSG;message.obj = publisher_event;handler.sendMessage(message);}}

3. 检测/设置软硬编码：

  /*** Set Video H.264 HW Encoder, if support HW encoder, it will return 0(设置H.264硬编码)* * @param kbps: the kbps of different resolution(25 fps).* * @return {0} if successful*/public native int SetSmartPublisherVideoHWEncoder(long handle, int kbps);/*** Set Video H.265(hevc) hardware encoder, if support H.265(hevc) hardware encoder, it will return 0(设置H.265硬编码)** @param kbps: the kbps of different resolution(25 fps).** @return {0} if successful*/public native int SetSmartPublisherVideoHevcHWEncoder(long handle, int kbps);

4. 设置文字水印、PNG图片水印：

    /*** Set Text water-mark(设置文字水印)* * @param fontSize: it should be "MEDIUM", "SMALL", "BIG"* * @param waterPostion: it should be "TOPLEFT", "TOPRIGHT", "BOTTOMLEFT", "BOTTOMRIGHT".* * @param xPading, yPading: the distance of the original picture.* * <pre> The interface is only used for setting font water-mark when publishing stream. </pre>  * * @return {0} if successful*/public native int SmartPublisherSetTextWatermark(long handle, String waterText, int isAppendTime, int fontSize, int waterPostion, int xPading, int yPading);/*** Set Text water-mark font file name(设置文字水印字体路径)** @param fontFileName:  font full file name, e.g: /system/fonts/DroidSansFallback.ttf** @return {0} if successful*/public native int SmartPublisherSetTextWatermarkFontFileName(long handle, String fontFileName);/*** Set picture water-mark(设置png图片水印)*                                           * @param picPath: the picture working path, e.g: /sdcard/logo.png* * @param waterPostion: it should be "TOPLEFT", "TOPRIGHT", "BOTTOMLEFT", "BOTTOMRIGHT".* * @param picWidth, picHeight: picture width & height* * @param xPading, yPading: the distance of the original picture.* * <pre> The interface is only used for setting picture(logo) water-mark when publishing stream, with "*.png" format </pre>  * * @return {0} if successful*/public native int SmartPublisherSetPictureWatermark(long handle, String picPath, int waterPostion, int picWidth, int picHeight, int xPading, int yPading);

5. 软编码可变码率设置（如摄像头采集编码，在设备性能允许的情况下，可以考虑软编码可变码率）：

 /*** Set software encode vbr mode(软编码可变码率).** <pre>please set before SmartPublisherStart while after SmartPublisherOpen.</pre>** is_enable_vbr: if 0: NOT enable vbr mode, 1: enable vbr** video_quality: vbr video quality, range with (1,50), default 23** vbr_max_kbitrate: vbr max encode bit-rate(kbps)** @return {0} if successful*/public native int SmartPublisherSetSwVBRMode(long handle, int is_enable_vbr, int video_quality, int vbr_max_kbitrate);

6. 帧率、软编码码率、关键帧间隔，编码速度、软编码profile等基础设定：

    /*** Set gop interval(设置I帧间隔)** <pre>please set before SmartPublisherStart while after SmartPublisherOpen.</pre>** gopInterval: encode I frame interval, the value always > 0** @return {0} if successful*/public native int SmartPublisherSetGopInterval(long handle, int gopInterval);/*** Set software encode video bit-rate(设置视频软编码bit-rate)** <pre>please set before SmartPublisherStart while after SmartPublisherOpen.</pre>** avgBitRate: average encode bit-rate(kbps)* * maxBitRate: max encode bit-rate(kbps)** @return {0} if successful*/public native int SmartPublisherSetSWVideoBitRate(long handle, int avgBitRate, int maxBitRate);/*** Set fps(设置帧率)** <pre>please set before SmartPublisherStart while after SmartPublisherOpen.</pre>** fps: the fps of video, range with (1,25).** @return {0} if successful*/public native int SmartPublisherSetFPS(long handle, int fps);/*** Set software video encoder profile(设置视频编码profile).** <pre>please set before SmartPublisherStart while after SmartPublisherOpen.</pre>** profile: the software video encoder profile, range with (1,3).* * 1: baseline profile* 2: main profile* 3: high profile** @return {0} if successful*/public native int SmartPublisherSetSWVideoEncoderProfile(long handle, int profile);/*** Set software video encoder speed(设置视频软编码编码速度)* * <pre>please set before SmartPublisherStart while after SmartPublisherOpen.</pre>* * @param speed: range with(1, 6), the default speed is 6. * * if with 1, CPU is lowest.* if with 6, CPU is highest.* * @return {0} if successful*/public native int SmartPublisherSetSWVideoEncoderSpeed(long handle, int speed);

7. 设置audio编码类型，如AAC编码、Speex编码，并设置如AAC编码码率等参数：

    /*** Set audio encoder type(设置音频编码类型)* * @param type: if with 1:AAC, if with 2: SPEEX* * @return {0} if successful*/public native int SmartPublisherSetAudioCodecType(long handle, int type);/*** Set audio encoder bit-rate(设置音频编码码率), 当前只对AAC编码有效** @param kbit_rate: 码率(单位是kbps), 如果是0的话将使用默认码率, 必须大于等于0** @return {0} if successful*/public native int SmartPublisherSetAudioBitRate(long handle, int kbit_rate);/*** Set speex encoder quality(设置speex编码质量)* * @param quality: range with (0, 10), default value is 8* * @return {0} if successful*/public native int SmartPublisherSetSpeexEncoderQuality(long handle, int quality);

8. 音频处理，如自动增益控制、噪音抑制：

    /*** Set Audio Noise Suppression(设置音频噪音抑制)* * @param isNS: if with 1:suppress, if with 0: does not suppress* * @return {0} if successful*/public native int SmartPublisherSetNoiseSuppression(long handle, int isNS);/*** Set Audio AGC(设置音频自动增益控制)* * @param isAGC: if with 1:AGC, if with 0: does not AGC* * @return {0} if successful*/public native int SmartPublisherSetAGC(long handle, int isAGC);

9. 音频混音接口设置：

 /*** 设置混音,目前支持两路音频混音** @param is_mix: 1混音, 0不混音, 默认不混音** @return {0} if successful*/public native int SmartPublisherSetAudioMix(long handle, int is_mix);

10. 实时静音设置：

    /*** Set mute or not during publish stream(设置实时静音)* * @param isMute: if with 1:mute, if with 0: does not mute* * @return {0} if successful*/public native int SmartPublisherSetMute(long handle, int isMute);

11. 音量调整：

 /*** 设置输入音量, 这个接口一般不建议调用, 在一些特殊情况下可能会用, 一般不建议放大音量** @param index: 一般是0和1, 如果没有混音的只用0, 有混音的话, 0,1分别设置音量** @param volume: 音量，默认是1.0，范围是[0.0, 5.0], 设置成0静音, 1音量不变** @return {0} if successful*/public native int SmartPublisherSetInputAudioVolume(long handle, int index, float volume);

12. 前置摄像头镜像：

    /*** Set mirror(设置前置摄像头镜像)* * @param isMirror: if with 1:mirror mode, if with 0: normal mode* * Please note when with "mirror mode", the publisher and player with the same echo direction* * @return {0} if successful*/public native int SmartPublisherSetMirror(long handle, int isMirror);

13. 录像相关配置，如只录制音频或视频，单个文件最大size，录像存放目录，开始/暂停/停止录像：

 /*** 音频录制开关, 目的是为了更细粒度的去控制录像, 一般不需要调用这个接口, 这个接口使用场景比如同时推送音视频，但只想录制视频，可以调用这个接口关闭音频录制** @param is_recoder: 0: do not recorder; 1: recorder; sdk默认是1** @return {0} if successful*/public native int SmartPublisherSetRecorderAudio(long handle, int is_recoder);/*** 视频录制开关, 目的是为了更细粒度的去控制录像, 一般不需要调用这个接口, 这个接口使用场景比如同时推送音视频，但只想录制音频，可以调用这个接口关闭视频录制** @param is_recoder: 0: do not recorder; 1: recorder; sdk默认是1** @return {0} if successful*/public native int SmartPublisherSetRecorderVideo(long handle, int is_recoder);/*** Create file directory(创建录像存放目录)* * @param path,  E.g: /sdcard/daniulive/rec* * <pre> The interface is only used for recording the stream data to local side. </pre> * * @return {0} if successful*/public native int SmartPublisherCreateFileDirectory(String path);/*** Set recorder directory(设置录像存放目录)* * @param path: the directory of recorder file.* * <pre> NOTE: make sure the path should be existed, or else the setting failed. </pre>* * @return {0} if successful*/public native int SmartPublisherSetRecorderDirectory(long handle, String path);/*** Set the size of every recorded file(设置单个录像文件大小，如超过最大文件大小，自动切换到下个文件录制)* * @param size: (MB), (5M~500M), if not in this range, set default size with 200MB.* * @return {0} if successful*/public native int SmartPublisherSetRecorderFileMaxSize(long handle, int size);/*** Start recorder(开始录像)** @return {0} if successful*/public native int SmartPublisherStartRecorder(long handle);/*** Pause recorder(暂停/恢复录像)** is_pause: 1表示暂停, 0表示恢复录像, 输入其他值将调用失败** @return {0} if successful*/public native int SmartPublisherPauseRecorder(long handle, int is_pause);/*** Stop recorder(停止录像)** @return {0} if successful*/public native int SmartPublisherStopRecorder(long handle);

14. 实时快照：

  /*** Set if needs to save image during publishing stream(设置是否启用快照)** @param is_save_image: if with 1, it will save current image via the interface of SmartPlayerSaveImage(), if with 0: does not it** @return {0} if successful*/public native int SmartPublisherSaveImageFlag(long handle,  int is_save_image);/*** Save current image during publishing stream(实时快照)** @param imageName: image name, which including fully path, "/sdcard/daniuliveimage/daniu.png", etc.** @return {0} if successful*/public native int SmartPublisherSaveCurImage(long handle,  String imageName);

15. 设置推送的RTMP URL：

    /*** Set rtmp publish stream url(设置推送的RTMP url)** @param url: rtmp publish url.** @return {0} if successful*/public native int SmartPublisherSetURL(long handle,  String url);

16. Android摄像头前后camera通过OnPreviewFrame()回调的数据接口：

    @Overridepublic void onPreviewFrame(byte[] data, Camera camera) {frameCount++;if (frameCount % 3000 == 0) {Log.i("OnPre", "gc+");System.gc();Log.i("OnPre", "gc-");}if (data == null) {Parameters params = camera.getParameters();Size size = params.getPreviewSize();int bufferSize = (((size.width | 0x1f) + 1) * size.height * ImageFormat.getBitsPerPixel(params.getPreviewFormat())) / 8;camera.addCallbackBuffer(new byte[bufferSize]);} else {if (isRTSPPublisherRunning || isPushingRtmp || isRecording || isPushingRtsp) {libPublisher.SmartPublisherOnCaptureVideoData(publisherHandle, data, data.length, currentCameraType, currentOrigentation);}camera.addCallbackBuffer(data);}}

对应接口定义：

/*** Set live video data(no encoded data).** @param cameraType: CAMERA_FACING_BACK with 0, CAMERA_FACING_FRONT with 1* * @param curOrg:* PORTRAIT = 1;    //竖屏* LANDSCAPE = 2;    //横屏 home键在右边的情况* LANDSCAPE_LEFT_HOME_KEY = 3; //横屏 home键在左边的情况** @return {0} if successful*/public native int SmartPublisherOnCaptureVideoData(long handle, byte[] data, int len, int cameraType, int curOrg);

17. 部分定制设备，只支持YV12的数据：

    /*** YV12数据接口** @param data: YV12 data** @param width: 图像宽** @param height: 图像高** @param y_stride:  y面步长** @param v_stride: v面步长** @param u_stride: u面步长** rotation_degree: 顺时针旋转, 必须是0, 90, 180, 270** @return {0} if successful*/public native int SmartPublisherOnYV12Data(long handle, byte[] data, int width, int height, int y_stride,  int v_stride, int u_stride, int rotation_degree);

18. 支持NV21数据接口：

nv21数据接口，除了用于常规的camera数据接入外，部分定制摄像头出来的数据发生翻转，这个接口也支持。

    /*** NV21数据接口** @param data: nv21 data** @param len: data length** @param width: 图像宽** @param height: 图像高** @param y_stride:  y面步长** @param uv_stride:  uv面步长** rotation_degree: 顺时针旋转, 必须是0, 90, 180, 270** @return {0} if successful*/public native int SmartPublisherOnNV21Data(long handle, byte[] data, int len, int width, int height, int y_stride,  int uv_stride, int rotation_degree);/*** NV21数据接口** @param data: nv21 data** @param len: data length** @param width: 图像宽** @param height: 图像高** @param y_stride:  y面步长** @param uv_stride:  uv面步长** rotation_degree: 顺时针旋转, 必须是0, 90, 180, 270** @param  is_vertical_flip: 是否垂直翻转, 0不翻转, 1翻转** @param  is_horizontal_flip：是否水平翻转, 0不翻转, 1翻转** @return {0} if successful*/public native int SmartPublisherOnNV21DataV2(long handle, byte[] data, int len, int width, int height, int y_stride,  int uv_stride, int rotation_degree,int is_vertical_flip, int is_horizontal_flip);

19. 支持YUV数据接入：

    /*** Set live video data(no encoded data).** @param data: I420 data* * @param len: I420 data length* * @param yStride: y stride* * @param uStride: u stride* * @param vStride: v stride** @return {0} if successful*/public native int SmartPublisherOnCaptureVideoI420Data(long handle,  byte[] data, int len, int yStride, int uStride, int vStride);

20. 支持RGBA数据接入（支持裁剪后数据接入，主要用于同屏场景）：

    /*** Set live video data(no encoded data).** @param data: RGBA data* * @param rowStride: stride information* * @param width: width* * @param height: height** @return {0} if successful*/public native int SmartPublisherOnCaptureVideoRGBAData(long handle,  ByteBuffer data, int rowStride, int width, int height);/*** 投递裁剪过的RGBA数据** @param data: RGBA data** @param rowStride: stride information** @param width: width** @param height: height** @param clipedLeft: 左;  clipedTop: 上; clipedwidth: 裁剪后的宽; clipedHeight: 裁剪后的高; 确保传下去裁剪后的宽、高均为偶数** @return {0} if successful*/public native int SmartPublisherOnCaptureVideoClipedRGBAData(long handle,  ByteBuffer data, int rowStride, int width, int height, int clipedLeft, int clipedTop, int clipedWidth, int clipedHeight);/*** Set live video data(no encoded data).** @param data: ABGR flip vertical(垂直翻转) data** @param rowStride: stride information** @param width: width** @param height: height** @return {0} if successful*/public native int SmartPublisherOnCaptureVideoABGRFlipVerticalData(long handle,  ByteBuffer data, int rowStride, int width, int height);

21. 支持RGB565数据接入（主要用于同屏场景）：

    /*** Set live video data(no encoded data).** @param data: RGB565 data** @param row_stride: stride information** @param width: width** @param height: height** @return {0} if successful*/public native int SmartPublisherOnCaptureVideoRGB565Data(long handle,ByteBuffer data, int row_stride, int width, int height);

22. 支持camera数据接入（主要用于camera2接口对接）：

/**  专门为android.media.Image的android.graphics.ImageFormat.YUV_420_888格式提供的接口** @param  width: 必须是8的倍数** @param  height: 必须是8的倍数** @param  crop_left: 剪切左上角水平坐标, 一般根据android.media.Image.getCropRect() 填充** @param  crop_top: 剪切左上角垂直坐标, 一般根据android.media.Image.getCropRect() 填充** @param  crop_width: 必须是8的倍数, 填0将忽略这个参数, 一般根据android.media.Image.getCropRect() 填充** @param  crop_height: 必须是8的倍数, 填0将忽略这个参数，一般根据android.media.Image.getCropRect() 填充** @param y_plane 对应android.media.Image.Plane[0].getBuffer()** @param y_row_stride 对应android.media.Image.Plane[0].getRowStride()** @param u_plane 对应android.media.Image.Plane[1].getBuffer()** @param v_plane 对应android.media.Image.Plane[2].getBuffer()** @param uv_row_stride 对应android.media.Image.Plane[1].getRowStride()** @param uv_pixel_stride 对应android.media.Image.Plane[1].getPixelStride()** @param  rotation_degree: 顺时针旋转, 必须是0, 90, 180, 270** @param  is_vertical_flip: 是否垂直翻转, 0不翻转, 1翻转** @param  is_horizontal_flip：是否水平翻转, 0不翻转, 1翻转** @param  scale_width: 缩放宽，必须是8的倍数, 0不缩放** @param  scale_height: 缩放高, 必须是8的倍数, 0不缩放** @param  scale_filter_mode: 缩放质量, 范围必须是[1,3], 传0使用默认速度** @return {0} if successful*/public native int SmartPublisherOnImageYUV420888(long handle, int width, int height,int crop_left, int crop_top, int crop_width, int crop_height,ByteBuffer y_plane, int y_row_stride,ByteBuffer u_plane, ByteBuffer v_plane, int uv_row_stride, int uv_pixel_stride,int rotation_degree, int is_vertical_flip, int is_horizontal_flip,int scale_width, int scale_height, int scale_filter_mode);

23. 支持PCM数据接入：

    /*** 传递PCM音频数据给SDK, 每10ms音频数据传入一次* *  @param pcmdata: pcm数据, 需要使用ByteBuffer.allocateDirect分配, ByteBuffer.isDirect()是true的才行.*  @param size: pcm数据大小*  @param sample_rate: 采样率，当前只支持{44100, 8000, 16000, 24000, 32000, 48000}, 推荐44100*  @param channel: 通道, 当前通道支持单通道(1)和双通道(2)，推荐单通道(1)*  @param per_channel_sample_number: 这个请传入的是 sample_rate/100*/public native int SmartPublisherOnPCMData(long handle, ByteBuffer pcmdata, int size, int sample_rate, int channel, int per_channel_sample_number);/*** 传递PCM音频数据给SDK, 每10ms音频数据传入一次**  @param pcmdata: pcm数据, 需要使用ByteBuffer.allocateDirect分配, ByteBuffer.isDirect()是true的才行.*  @param offset: pcmdata的偏移*  @param size: pcm数据大小*  @param sample_rate: 采样率，当前只支持{44100, 8000, 16000, 24000, 32000, 48000}, 推荐44100*  @param channel: 通道, 当前通道支持单通道(1)和双通道(2)，推荐单通道(1)*  @param per_channel_sample_number: 这个请传入的是 sample_rate/100*/public native int SmartPublisherOnPCMDataV2(long handle, ByteBuffer pcmdata, int offset, int size, int sample_rate, int channel, int per_channel_sample_number);/*** 传递PCM音频数据给SDK, 每10ms音频数据传入一次**  @param pcm_short_array: pcm数据, short是native endian order*  @param offset: 数组偏移*  @param len: 数组项数*  @param sample_rate: 采样率，当前只支持{44100, 8000, 16000, 24000, 32000, 48000}, 推荐44100*  @param channel: 通道, 当前通道支持单通道(1)和双通道(2)，推荐单通道(1)*  @param per_channel_sample_number: 这个请传入的是 sample_rate/100*/public native int SmartPublisherOnPCMShortArray(long handle, short[] pcm_short_array, int offset, int len, int sample_rate, int channel, int per_channel_sample_number);

24. 支持远端PCM数据接入和混音后PCM数据接入（主要用于一对一互动）：

/*** Set far end pcm data* * @param pcmdata : 16bit pcm data* @param sampleRate: audio sample rate* @param channel: auido channel* @param per_channel_sample_number: per channel sample numbers* @param is_low_latency: if with 0, it is not low_latency, if with 1, it is low_latency* @return {0} if successful*/public native int SmartPublisherOnFarEndPCMData(long handle,  ByteBuffer pcmdata, int sampleRate, int channel, int per_channel_sample_number, int is_low_latency);/*** 传递PCM混音音频数据给SDK, 每10ms音频数据传入一次**  @param stream_index: 当前只能传1, 传其他返回错误*  @param pcm_data: pcm数据, 需要使用ByteBuffer.allocateDirect分配, ByteBuffer.isDirect()是true的才行.*  @param offset: pcmdata的偏移*  @param size: pcm数据大小*  @param sample_rate: 采样率，当前只支持{44100, 8000, 16000, 24000, 32000, 48000}*  @param channels: 通道, 当前通道支持单通道(1)和双通道(2)*  @param per_channel_sample_number: 这个请传入的是 sample_rate/100*/public native int SmartPublisherOnMixPCMData(long handle, int stream_index, ByteBuffer pcm_data, int offset, int size, int sample_rate, int channels, int per_channel_sample_number);/*** 传递PCM混音音频数据给SDK, 每10ms音频数据传入一次**  @param stream_index: 当前只能传1, 传其他返回错误*  @param pcm_short_array: pcm数据, short是native endian order*  @param offset: 数组偏移*  @param len: 数组项数*  @param sample_rate: 采样率，当前只支持{44100, 8000, 16000, 24000, 32000, 48000}*  @param channels: 通道, 当前通道支持单通道(1)和双通道(2)*  @param per_channel_sample_number: 这个请传入的是 sample_rate/100*/public native int SmartPublisherOnMixPCMShortArray(long handle, int stream_index, short[] pcm_short_array, int offset, int len, int sample_rate, int channels, int per_channel_sample_number);

25. H264扩展SEI消息：

 /*** 设置发送队列大小，为保证实时性，默认大小为3, 必须设置一个大于0的数** @param max_size: 队列最大长度** @param reserve: 保留字段** NOTE: 1. 如果数据超过队列大小，将丢掉队头数据; 2. 这个接口请在 StartPublisher 之前调用** @return {0} if successful*/public native int SmartPublisherSetPostUserDataQueueMaxSize(long handle, int max_size, int reserve);/*** 清空用户数据队列, 有些情况可能会用到，比如发送队列里面有4条消息再等待发送,又想把最新的消息快速发出去, 可以先清除掉正在排队消息, 再调用PostUserXXX** @return {0} if successful*/public native int SmartPublisherClearPostUserDataQueue(long handle);/*** 发送二进制数据** NOTE:* 1.目前数据大小限制在256个字节以内，太大可能会影响视频传输，如果有特殊需求，需要增大限制，请联系我们* 2. 如果积累的数据超过了设置的队列大小，之前的队头数据将被丢弃* 3. 必须再调用StartPublisher之后再发送数据** @param data: 二进制数据** @param size: 数据大小** @param reserve: 保留字段** @return {0} if successful*/public native int SmartPublisherPostUserData(long handle, byte[] data, int size, int reserve);/*** 发送utf8字符串** NOTE:* 1. 字符串长度不能超过256, 太大可能会影响视频传输，如果有特殊需求，需要增大限制，请联系我们* 2. 如果积累的数据超过了设置的队列大小，之前的队头数据将被丢弃* 3. 必须再调用StartPublisher之后再发送数据** @param utf8_str: utf8字符串** @param reserve: 保留字段** @return {0} if successful*/public native int SmartPublisherPostUserUTF8StringData(long handle, String utf8_str, int reserve);

26. 关闭推送实例：

    /*** 关闭推送实例，结束时必须调用close接口释放资源** @return {0} if successful*/public native int SmartPublisherClose(long handle);

Android平台屏幕/摄像头或外部数据采集及RTMP推送接口设计描述相关推荐

Windows平台下如何实现Unity3D下的RTMP推送
好多开发者苦于很难在unity3d下实现RTMP直播推送,本次以大牛直播SDK(Github)的Windows平台RTMP推送模块(以推摄像头为例,如需推屏幕数据,设置相关参数即可)为例,介绍下uni ...
Android平台RTSP轻量级服务|RTMP推送摄像头或屏幕之音频接口设计
好多开发者在做Android平台录像或者RTSP轻量级服务.RTMP推送相关模块时,对需要设计哪些常用接口会心存疑惑,本文主要以大牛直播SDK(官方)为例,简单介绍下Android平台直播推送SDK所 ...
Windows平台摄像头或屏幕RTMP推送：OBS VS SmartPublisher
好多开发者问道,既然有了OBS,你们为什么还要开发SmartPublisher? 的确,在我们进行Windows平台RTMP推送模块开发之前,市面上为数不多的Windows平台RTMP推流工具当属OB ...
Windows平台摄像头或屏幕RTMP推送：OBS还是SmartPublisher
好多开发者问道,既然有了OBS,你们为什么还要开发SmartPublisher? 的确,在我们进行Windows平台RTMP推送模块开发之前,市面上为数不多的Windows平台RTMP推流工具当属OB ...
Windows平台RTMP/RTSP直播推送模块设计和使用说明
开发背景好多开发者一直反馈,Windows平台,做个推屏或者推摄像头,推RTMP或者RTSP出去,不知道哪些功能是必须的,哪些设计是可有可无的,还有就是,不知道如何选技术方案,以下是基于我们设计的W ...
Android平台RTMP推送端实现外部数据对接推送和录像
背景好多开发者在做Android平台RTMP推送对接的同时,除了编码前的数据外,还有些外部编码数据推送诉求,他们希望外部的编码音视频数据不止可以实现RTMP推送,还可以同时在推送端实时录制下来,本文 ...
Windows平台RTMP推送|轻量级RTSP服务实现本地摄像头|屏幕|叠加数据预览
背景大家在做Windows平台RTMP推送或轻量级RTSP服务的时候,不管是采集屏幕还是采集摄像头,亦或屏幕摄像头的叠加模式,总会有这样的诉求,采集到的数据,希望能本地看看具体采集的数据或者图像实际 ...
Android平台RTMP推送模块如何对接NV21、YV12、RGB、YUV等编码前数据
前言我们在对接Android平台摄像头或者屏幕采集.编码打包推送场景的时候,随着采集设备的不同,出来的数据也是多样化的,比如NV21.YV12.RGB.YUV等,更有图像数据甚至是翻转或者倒置的,如 ...
Android同屏或摄像头RTMP推送常用的数据接口设计探讨
前言好多开发者在调用Android平台RTMP推送或轻量级RTSP服务接口时,采集到的video数据类型多样化,如420sp.I420.yv12.nv21.rgb的,还有的拿到的图像是倒置的,如果开 ...