html文件设置ftp6,vsftp的安装与配置
环境mint17.2
1.安装
dpkg -l|grep ftp
sudo apt-get install vsftpd
2.去根目录创建一个文件上传的文件夹
sudo mkdir /ftpfile
3.创建一个用户,他只对上传文件有权限,对系统登录无权限
sudo useradd ftpuser -d /ftpfile/ -s /bin/bash
4.用chown修改ftpfile的用户和组
sudo chown -R ftpuser.ftpuser /ftpfile/
5.重置用户的密码
sudo passwd ftpuser
6.去ftpfile文件夹中创建一个html文件
sudo gedit /ftpfile/index.html
7.配置ftp服务器
先找到ftp的安装位置: whereis vsftpd
修改配置文件:sudo gedit /etc/vsftpd.conf
ftpd_banner=Welcome to vsftp service.(用户登录ftp服务器时候的欢迎信息)
local_root=/ftpfile(本地目录)
use_localtime=yes
重要的是增加这几句:
userlist_deny=NO
userlist_enable=YES
userlist_file=/etc/allowed_users
write_enable=YES
seccomp_sandbox=NO
在/etc/allowed_users增加ftpuser,这个文件表示可以登录ftp服务器的账户
设置端口范围
pam_service_name=vsftpd(采用被动模式)
pasv_min_port=61001
pasv_max_port=62000
配置防火墙iptables
sudo apt-getinstall iptables-persistent(安装配置iptables的文件)
添加防火墙规则
-A INPUT -p TCP --dport 61001:62000 -j ACCEPT
-A OUTPUT -p TCP --sport 61001:62000 -j ACCEPT
-A INPUT -p TCP --dport 20 -j ACCEPT
-A OUTPUT -p TCP --sport 20 -j ACCEPT
-A INPUT -p TCP --dport 21 -j ACCEPT
-A OUTPUT -p TCP --sport 21 -j ACCEPT
查看修改这个文件/etc/ftpusers,这个文件里面记录的是不能登录ftp服务器的用户
sudo gedit /etc/ftpusers
重新启动防火墙
重启ftp服务器
sudo service vsftpd restart
8.ftp服务器的验证
附上/etc/vsftpd.conf整个配置文件:# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
#
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
#
# Run standalone? vsftpd can run either from an inetd or as a standalone
# daemon started from an initscript.
listen=YES
#
# Run standalone with IPv6?
# Like the listen parameter, except vsftpd will listen on an IPv6 socket
# instead of an IPv4 one. This parameter and the listen parameter are mutually
# exclusive.
#listen_ipv6=YES
#
# Allow anonymous FTP? (Disabled by default)
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
#anon_upload_enable=YES
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
#anon_mkdir_write_enable=YES
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# If enabled, vsftpd will display directory listings with the time
# in your local time zone. The default is to display GMT. The
# times returned by the MDTM FTP command are also affected by this
# option.
use_localtime=YES
#
# Activate logging of uploads/downloads.
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# You may override where the log file goes if you like. The default is shown
# below.
#xferlog_file=/var/log/vsftpd.log
#
# If you want, you can have your log file in standard ftpd xferlog format.
# Note that the default log file location is /var/log/xferlog in this case.
#xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
#ascii_upload_enable=YES
#ascii_download_enable=YES
#
# You may fully customise the login banner string:
ftpd_banner=Welcome to blah FTP service.
local_root=/ftpfile
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd.banned_emails
#
# You may restrict local users to their home directories. See the FAQ for
# the possible risks in this before using chroot_local_user or
# chroot_list_enable below.
#chroot_local_user=YES
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
# (Warning! chroot'ing can be very dangerous. If using chroot, make sure that
# the user does not have write access to the top level directory within the
# chroot)
#chroot_local_user=YES
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd.chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
# Customization
#
# Some of vsftpd's settings don't fit the filesystem layout by
# default.
#
# This option should be the name of a directory which is empty. Also, the
# directory should not be writable by the ftp user. This directory is used
# as a secure chroot() jail at times vsftpd does not require filesystem
# access.
secure_chroot_dir=/var/run/vsftpd/empty
#
# This string is the name of the PAM service vsftpd will use.
pam_service_name=vsftpd
pasv_min_port=61001
pasv_max_port=62000
#
# This option specifies the location of the RSA certificate to use for SSL
# encrypted connections.
rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
# This option specifies the location of the RSA key to use for SSL
# encrypted connections.
rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
userlist_deny=NO
userlist_enable=YES
userlist_file=/etc/allowed_users
write_enable=YES
seccomp_sandbox=NO
html文件设置ftp6,vsftp的安装与配置相关推荐
- centos mysql 设置_CentOS下MySQL安装后配置和设置-阿里云开发者社区
CentOS下MySQL安装后配置和设置: 1:安装完成路径: 1.数据库目录 /var/lib/mysql/ 2.配置文件 /usr/share/mysql(mysql.server命令及配置文件) ...
- linux设置docker自动启动,CentOS7安装Docker配置服务端和容器自启动
接上一篇,在VirtualBox上安装配置好了CentOS7,继续在这个虚拟机上装好docker并总结一下使用到的常用功能. 安装Docker 安装直接参考官网来安装就OK,没有遇到什么问题,值得注意 ...
- html文件设置ftp6,ftp命令大全详解
来熟悉熟悉ftp命令,对于服务器之间的文件传输太有用啦,不会怎么能行呢! 先来看看基础的命令,包括了连接,列出列表,下载,上传,断开这最基础的命令,会这些,在使用ftp命令行就毫无压力啦! 1. 连接 ...
- Exchange企业实战技巧(1)验证安装及配置产品密钥
(一)验证安装 完成Exchange Server 2010安装后,建议您通过运行 Get-ExchangeServer cmdlet 并查看安装日志文件来验证安装.如果安装过程失败,或在安装期间出错 ...
- P6 EPPM 安装与配置指南 16 R1 2016.4
关于安装和 配置P6 EPPM 本指南告诉你如何自动 安装和配置您的应用程序. 在您开始之前,阅读 先决条件 P6 EPPM配置 (7页). 安装P6 EPPM 您将使用 安装程序 (窗口) . ...
- [安装程序配置服务器失败]解决SQL Server2000安装失败
[安装程序配置服务器失败]解决SQL Server2000安装失败 在安装SQL2000时,总是在启动服务时失败!提示安装程序配置服务器失败.根据它的提示查看日志文件.提示为:"安装程序配置 ...
- CentOS中vsftp安装与配置
1. 安装 使用chkconfig --list来查看是否装有vsftpd服务: 使用yum命令直接安装:yum -y install vsftpd 然后为它创建日志文件:touch /var/ ...
- CentOs6.5中安装和配置vsftp简明教程
这篇文章主要介绍了CentOs6.5中安装和配置vsftp简明教程,需要的朋友可以参考下 一.vsftp安装篇 复制代码代码如下: # 安装vsftpd yum -y install vsftpd # ...
- Ubuntu下vsftp安装和配置
vsftpd是Linux系统下非常常用的一款FTP程序. 一.安装.重装.卸载vsftp 全新安装:apt-get install vsftpd 重新安装:apt-get --reinstall in ...
最新文章
- python定时任务:apscheduler的使用(还有一个celery~)
- Codeforces - 914F bitset 维护字符串匹配个数
- Unity 内嵌网页
- ant编辑java忽略注释_java – 注释不起作用
- 切换或者用户登录时 出现 显示 -bash-4.2$ 问题 的解决
- assert()和panic()
- 在window是下安装hadoop过程
- 深度装机大师一键重装_正确重装系统(1):一键重装系统出现问题解决方法...
- 安装loadrunner,缺少VC2005_sp1_with_atl的错
- C++里中文转拼音那点事
- 【Eternallyc】函数PlaySound和sndPlaySound
- 智能网联「中国百强供应商」都有谁?8月30-31日现场揭晓
- Liunx-centos8入门+配置网络
- 自制导航App(包含地图、定位、自定义marker、路线制定、模拟导航等功能)
- 记录SEO寄生虫处理过程
- 【ML4CO论文精读】具有离散拆分送货和取货的车辆路径问题的禁忌搜索算法(Meng Qiu, 2018)
- win7系统下安装win10教程
- www.crx4chrome.com
- 一文读懂 Web 安全
- Face Paper:DSSD目标检测
热门文章
- 前端学习(2037)vue之电商管理系统电商系统之优化
- “睡服”面试官系列第十篇之module的语法(建议收藏学习)
- 前端学习(1410):多人管理30数据分页
- 前端学习(1382):多人管理项目2案例初始化
- java学习(20):巩固练习
- firefox android 去更新,Android版Firefox Beta发布更新
- JS之Number的toString方法
- js 循环拆词_javascript forEach通用循环遍历方法
- python读取扫描形成的pdf_Python利用PyPDF2库获取PDF文件总页码实例
- 转:Fiddler抓包工具总结