认识众多玩家高手/拆客/DIYer,查阅更多资源,一起学习技术知识

您需要 登录 才可以下载或查看,没有帐号?立即注册

x

马家买了无线路由器,配置蛮高,1.2g cpu,512m 内存,运行openwrt,卖家说有些问题,没在意以为改下通信规则就可以自己搞定,结果翻车。

1.jpg (45.05 KB, 下载次数: 0)

2019-9-19 16:48 上传

2.jpg (83.14 KB, 下载次数: 0)

2019-9-19 16:48 上传

连上串口,信息如下:

|  \/  | __ _ _ ____   _____| | |

| |\/| |/ _` | '__\ \ / / _ \ | |

| |  | | (_| | |   \ V /  __/ | |

|_|  |_|\__,_|_|    \_/ \___|_|_|

_   _     ____              _

| | | |   | __ )  ___   ___ | |_

| | | |___|  _ \ / _ \ / _ \| __|

| |_| |___| |_) | (_) | (_) | |_

\___/    |____/ \___/ \___/ \__|

** MARVELL BOARD: RD-88F6281A LE

U-Boot 1.1.4 (Aug  6 2014 - 16:49:28) Marvell version: 3.5.9 - v16288q

U-Boot code: 00600000 -> 0067FFF0  BSS: -> 006D1340

Soc: 88F6281 A1

CPU running @ 1200Mhz L2 running @ 400Mhz

SysClock = 400Mhz , TClock = 200Mhz

DRAM (DDR2) CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6

DRAM CS[0] base 0x00000000   size 256MB

DRAM CS[1] base 0x10000000   size 256MB

DRAM Total size 512MB  16bit width

Addresses 8M - 0M are saved for the U-Boot usage.

Mem malloc Initialization (8M - 7M): Done

NAND:512 MB

Flash:  0 kB

CPU : Marvell Feroceon (Rev 1)

Streaming disabled

Write allocate disabled

Module 0 is RGMII

Module 1 is TDM

USB 0: host mode

PEX 0: PCI Express Root Complex Interface

PEX interface detected Link X1

Net:   egiga0, egiga1 [PRIME]

Hit "F2" key to stop autoboot:  0

NAND read: device 0 offset 0x100000, size 0x300000

3145728 bytes read: OK

## Booting image at 02000000 ...

Image Name:   Linux-3.3.8

Created:      2014-11-05   9:19:12 UTC

Image Type:   ARM Linux Kernel Image (uncompressed)

Data Size:    1130456 Bytes =  1.1 MB

Load Address: 00008000

Entry Point:  00008000

Verifying Checksum ... OK

OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.

[    0.000000] Booting Linux on physical CPU 0

[    0.000000] Linux version 3.3.8 (zhangbin@ubuntu) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #3 Wed Nov 5 01:19:07 PST 2014

[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977

[    0.000000] CPU: VIVT data cache, VIVT instruction cache

[    0.000000] Machine: Prafly M8621T Router Board

[    0.000000] Ignoring unrecognised tag 0x41000403

[    0.000000] Memory policy: ECC disabled, Data cache writeback

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048

[    0.000000] Kernel command line: noinitrd console=ttyS0,115200 init=/etc/preinit root=/dev/mtdblock2 rootfstype=squashfs,jffs2

[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)

[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

[    0.000000] Memory: 512MB = 512MB total

[    0.000000] Memory: 516412k/516412k available, 7876k reserved, 0K highmem

[    0.000000] Virtual kernel memory layout:

[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)

[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)

[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)

[    0.000000]       .text : 0xc0008000 - 0xc02d5000   (2868 kB)

[    0.000000]       .init : 0xc02d5000 - 0xc02f5000   ( 128 kB)

[    0.000000]       .data : 0xc02f6000 - 0xc0313d40   ( 120 kB)

[    0.000000]        .bss : 0xc0313d64 - 0xc0342a14   ( 188 kB)

[    0.000000] NR_IRQS:114

[    0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: orion_gpio0

[    0.000000] gpiochip_add: registered GPIOs 32 to 49 on device: orion_gpio1

[    0.000000] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474ms

[   12.120351] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)

[   12.210332] pid_max: default: 32768 minimum: 301

[   12.210473] Mount-cache hash table entries: 512

[   12.210767] CPU: Testing write buffer coherency: ok

[   12.210979] Setting up static identity map for 0x275d10 - 0x275d4c

[   12.212581] NET: Registered protocol family 16

[   12.214557] Kirkwood: MV88F6281-A1, TCLK=200000000.

[   12.214572] Feroceon L2: Enabling L2

[   12.214607] Feroceon L2: Cache support initialised.

[   12.216922] Kirkwood PCIe port 0:

[   12.216929] link up

[   12.216937] PCI: bus0 uses PCIe port 0

[   12.217091] PCI host bridge to bus 0000:00

[   12.217105] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff]

[   12.217117] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]

[   12.217403] PCI: bus0: Fast back to back transfers disabled

[   12.217739] pci 0000:00:01.0: BAR 0: assigned [mem 0xe0000000-0xe000ffff 64bit]

[   12.226325] bio: create slab at 0

[   12.227239] SCSI subsystem initialized

[   12.228128] usbcore: registered new interface driver usbfs

[   12.228268] usbcore: registered new interface driver hub

[   12.228420] usbcore: registered new device driver usb

[   12.229505] Switching to clocksource orion_clocksource

[   12.231101] NET: Registered protocol family 2

[   12.231231] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)

[   12.231463] TCP established hash table entries: 16384 (order: 5, 131072 bytes)

[   12.231814] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)

[   12.231992] TCP: Hash tables configured (established 16384 bind 16384)

[   12.232001] TCP reno registered

[   12.232011] UDP hash table entries: 256 (order: 0, 4096 bytes)

[   12.232033] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

[   12.232204] NET: Registered protocol family 1

[   12.233449] squashfs: version 4.0 (2009/01/31) Phillip Lougher

[   12.233463] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.

[   12.233769] msgmni has been set to 1008

[   12.233798] io scheduler noop registered

[   12.233807] io scheduler deadline registered (default)

[   12.300853] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled

[   12.321609] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A

[   12.701817] console [ttyS0] enabled

[   12.706108] SCSI Media Changer driver v0.25

[   12.711615] NAND device: Manufacturer ID: 0xec, Chip ID: 0xdc (Samsung NAND 512MiB 3,3V 8-bit)

[   12.720296] Scanning device for bad blocks

[   12.735999] Bad eraseblock 212 at 0x000001a80000

[   12.772257] Bad eraseblock 792 at 0x000006300000

[   12.830049] Bad eraseblock 1767 at 0x00000dce0000

[   12.905066] Bad eraseblock 3056 at 0x000017e00000

[   12.911900] Bad eraseblock 3095 at 0x0000182e0000

[   12.967218] Bad eraseblock 4023 at 0x00001f6e0000

[   12.976111] Creating 5 MTD partitions on "orion_nand":

[   12.981290] 0x000000000000-0x000000100000 : "u-boot"

[   12.987155] 0x000000100000-0x000000300000 : "kernel"

[   12.992999] 0x000000300000-0x000002000000 : "rootfs"

[   12.998831] mtd: partition "rootfs" set to be root filesystem

[   13.004676] mtd: partition "rootfs_data" created automatically, ofs=680000, len=1980000

[   13.012815] 0x000000680000-0x000002000000 : "rootfs_data"

[   13.019024] 0x000000100000-0x000002000000 : "firmware"

[   13.025012] 0x000002000000-0x000020000000 : "usrdata"

[   13.031759] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4

[   13.038707] mv643xx_eth smi: probed

[   13.042933] mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address 28:51:32:0a:d4:b2

[   13.052319] mv643xx_eth_port mv643xx_eth_port.1: eth1: port 0 with MAC address 28:51:32:0a:d4:b3

[   13.061276] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[   13.067869] orion-ehci orion-ehci.0: Marvell Orion EHCI

[   13.073192] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1

[   13.109546] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000

[   13.129536] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00

[   13.136018] hub 1-0:1.0: USB hub found

[   13.139811] hub 1-0:1.0: 1 port detected

[   13.144135] Initializing USB Mass Storage driver...

[   13.149198] usbcore: registered new interface driver usb-storage

[   13.155248] USB Mass Storage support registered.

[   13.160326] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0

[   13.166359] cpuidle: using governor ladder

[   13.171934] mmc0: mvsdio driver initialized, using GPIO 43 for card detection

[   13.179550] TCP cubic registered

[   13.182790] NET: Registered protocol family 17

[   13.187269] Zeus Base Module loaded, version: 1.0.00

[   13.192271] Zeus Sysview Module loaded, version: 1.0.00

[   13.197527] Zeus Netinet Module loaded, version: 1.0.00

[   13.202786] Zeus Datrie Module loaded, version: 1.0.00

[   13.207945] Zeus Strace Module loaded, version: 1.0.00

[   13.213246] Zeus State Module loaded, version: 1.0.00

[   13.223682] Zeus Dpi Layer7 Module loaded, version: 1.0.00

[   13.229312] Zeus Domain Module loaded, version: 1.0.00

[   13.234520] Zeus Notice Module loaded, version: 1.0.00

[   13.239803] Zeus Ipv4fw Module loaded, version: 1.0.00

[   13.244973] Zeus Audit Module loaded, version: 1.0.00

[   13.259252] rx_desc_queue length: 4096, tx_desc_queue length: 0

[   13.265242] Zeus Network Core Module loaded, version: 1.0.00

[   13.270948] Zeus Http Module loaded, version: 1.0.00

[   13.277631] Zeus Smtp Module loaded, version: 1.0.00

[   13.282697] Zeus Common QQ Module loaded, version: 1.0.00

[   13.288145] Zeus Mobile QQ Module loaded, version: 1.0.00

[   13.293611] Zeus PIN Module loaded, version: 1.0.00

[   13.298544] Zeus Efence Module loaded, version: 1.0.00

[   13.303876] Distributed Switch Architecture driver version 0.1

[   13.310517] eth0[0]: detected a Marvell 88E6171/88E6171R switch

[   13.422989] dsa slave smi: probed

[   13.426431] 8021q: 802.1Q VLAN Support v1.8

[   13.430872] rtc-mv rtc-mv: setting system clock to 2000-01-22 20:29:48 UTC (948572988)

[   13.442053] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.

[   13.449507] Freeing init memory: 128K

- preinit -

Press the [f] key and hit [enter] to enter failsafe mode

- regular preinit -

[   17.775243] JFFS2 notice: (1452) jffs2_build_xattr_subsystem: complete building xattr subsystem, 3 of xdatum (0 unchecked, 3 orphan) and 30 of xref (0 dead, 30 orphan) found.

switching to jffs2

- init -

Please press Enter to activate this console. [   18.525663] Loading modules backported from Linux version master-2013-06-27-0-gdcfa6d5

[   18.533641] Backport generated by backports.git backports-20130617-4-ge3220f5

[   18.553967] cfg80211: Calling CRDA to update world regulatory domain

[   18.560423] cfg80211: World regulatory domain updated:

[   18.565584] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

[   18.573814] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[   18.581605] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[   18.589383] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[   18.597170] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[   18.604956] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[   18.704500] NET: Registered protocol family 10

[   19.152433] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xe0be0000, irq=9

[   19.169012] usbcore: registered new interface driver rt2800usb

[   19.231743] PPP generic driver version 2.4.2

[   19.424790] ip_tables: (C) 2000-2006 Netfilter Core Team

[   19.593687] NET: Registered protocol family 24

[   19.609690] nf_conntrack version 0.5.0 (8070 buckets, 32280 max)

[   20.263898] xt_time: kernel timezone is -0000

[   20.956485] xt_length2: Unknown symbol ipv6_find_hdr (err 0)

[   21.031788] nf_conntrack_rtsp v0.6.21 loading

[   21.045230] nf_nat_rtsp v0.6.21 loading

[   21.075352] xt_RAWNAT: Unknown symbol ipv6_find_hdr (err 0)

[   21.098086] xt_SYSRQ: Unknown symbol ipv6_find_hdr (err 0)

[   21.166028] Netfilter messages via NETLINK v0.30.

[   21.245567] ip6_tables: (C) 2000-2006 Netfilter Core Team

[   21.376567] ip_set: protocol 6

[   21.595812] ctnetlink v0.93: registering with nfnetlink.

[   21.767101] NF_TPROXY: Transparent proxy support initialized, version 4.1.0

[   21.774123] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.

[   21.917887] usbcore: registered new interface driver ath9k_htc

[   24.797531] mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 1000 Mb/s, full duplex, flow control disabled

[   24.808357] device eth0 entered promiscuous mode

[   24.813660] br-lan: port 1(eth0) entered forwarding state

[   24.819091] br-lan: port 1(eth0) entered forwarding state

[   24.837281] mv643xx_eth_port mv643xx_eth_port.1: eth1: link up, 1000 Mb/s, full duplex, flow control disabled

[   25.789682] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[   26.809558] br-lan: port 1(eth0) entered forwarding state

[   30.250615] ADDRCONF(NETDEV_UP): wlan0: link is not ready

[   30.267071] device wlan0 entered promiscuous mode

[   30.292872] ADDRCONF(NETDEV_UP): wlan0: link is not ready

[   30.308694] br-lan: port 2(wlan0) entered forwarding state

[   30.314250] br-lan: port 2(wlan0) entered forwarding state

[   30.319906] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

[   32.309535] br-lan: port 2(wlan0) entered forwarding state

[   52.514845] ------------[ cut here ]------------

[   52.519507] WARNING: at include/net/dst.h:178 0xc023c6d8()

[   52.525042] Modules linked in: ath9k_htc(O) xt_TPROXY xt_socket nf_tproxy_core ip6table_rawpost(O) iptable_rawpost(O) xt_hashlimit nf_conntrack_netlink xt_set(O) ip_set_list_set(O) ip_set_hash_netport(O) ip_set_hash_netiface(O) ip_set_hash_net(O) ip_set_hash_ipportnet(O) ip_set_hash_ipportip(O) ip_set_hash_ipport(O) ip_set_hash_ip(O) ip_set_bitmap_port(O) ip_set_bitmap_ipmac(O) ip_set_bitmap_ip(O) ip_set(O) ip6t_REJECT ip6t_LOG ip6t_rt ip6t_hbh ip6t_mh ip6t_ipv6header ip6t_frag ip6t_eui64 ip6t_ah ip6table_raw ip6_queue ip6table_mangle ip6table_filter ip6_tables nf_conntrack_ipv6 nf_defrag_ipv6 nfnetlink_queue nfnetlink_log nfnetlink xt_CHAOS(O) xt_TARPIT(O) xt_STEAL(O) xt_quota2(O) xt_psd(O) nf_nat_rtsp(O) nf_conntrack_rtsp(O) xt_LUA(O) xt_lscan(O) xt_LOGMARK(O) xt_ipv4options(O) xt_ipp2p(O) xt_IPMARK(O) xt_iface(O) xt_geoip(O) xt_fuzzy(O) xt_DNETMAP(O) xt_DHCPMAC(O) xt_DELUDE(O) xt_condition(O) xt_ACCOUNT(O) ipt_ULOG xt_u32 xt_TEE ip_queue nf_nat_tftp nf_conntrack_tftp nf_nat_snmp_basic nf_conntrack_snmp nf_nat_sip nf_conntrack_sip nf_nat_pptp nf_conntrack_pptp nf_nat_h323 nf_conntrack_h323 nf_nat_proto_gre nf_conntrack_proto_gre nf_nat_amanda nf_conntrack_amanda nf_conntrack_broadcast nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp xt_esp ipt_ah xt_iprange xt_HL xt_hl xt_ecn ipt_ECN xt_CLASSIFY xt_time xt_tcpmss xt_statistic xt_mark xt_length xt_DSCP xt_dscp xt_string xt_layer7 xt_quota xt_pkttype xt_owner compat_xtables(O) ipt_REDIRECT ipt_NETMAP ipt_MASQUERADE iptable_nat nf_nat xt_recent xt_helper xt_connmark xt_connbytes pppoe xt_conntrack xt_CT xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tables ifb ppp_async ppp_generic slhc rt2800usb(O) ath9k(O) rt2800lib(O) ath9k_common(O) ath9k_hw(O) rt2x00usb(O) ath(O) rt2x00lib(O) mac80211(O) ts_fsm ts_bm ts_kmp crc_itu_t crc_ccitt ipv6 cfg80211(O) compat(O) arc4 aes_generic crypto_algapi

[   52.704417] Backtrace:

[   52.706878] Function entered at [] from []

[   52.712746]  r6:000000b2 r5:c02b7c38 r4:00000000 r3:c02fe080

[   52.718466] Function entered at [] from []

[   52.724335] Function entered at [] from []

[   52.730201]  r8:ddd850a0 r7:dea19e80 r6:c033e648 r5:de1a6d60 r4:deaa7d40

[   52.736786] r3:00000009

[   52.739429] Function entered at [] from []

[   52.745297] Function entered at [] from []

[   52.751165] Function entered at [] from []

[   52.757017]  r5:deaa7d40 r4:00000001

[   52.760628] Function entered at [] from []

[   52.766487] Function entered at [] from []

[   52.772355]  r6:deaa7d40 r5:ddc94850 r4:ddd85460 r3:c0256e58

[   52.778068] Function entered at [] from []

[   52.783935]  r8:dead7000 r7:c033c2a0 r6:deaa7d40 r5:deaa7d40 r4:ddc94850

[   52.790712] Function entered at [] from []

[   52.796571]  r7:c033c2a0 r6:deaa7d40 r5:00000000 r4:00000001

[   52.802291] Function entered at [] from []

[   52.808150]  r8:00000001 r7:00000000 r6:c02f844c r5:00000008 r4:c02f842c

[   52.814927] Function entered at [] from []

[   52.820795] Function entered at [] from []

[   52.826655]  r4:00000001

[   52.829201] Function entered at [] from []

[   52.835069] Function entered at [] from []

[   52.840938] Function entered at [] from []

[   52.846798] Function entered at [] from []

[   52.852665]  r4:df8864c8

[   52.855214] Function entered at [] from []

[   52.861081] Function entered at [] from []

[   52.866942] Function entered at [] from []

[   52.872808] Function entered at [] from []

[   52.878661] Function entered at [] from []

[   52.884528]  r6:fed20200 r5:20000013 r4:c010c61c r3:c010cf84

[   52.890251] Function entered at [] from []

[   52.896111] Exception stack(0xdea5fa08 to 0xdea5fa50)

[   52.901199] fa00:                   de918018 00000004 00000711 00000b7c 00001000 00040000

[   52.909414] fa20: 00000000 00000b79 de918078 00000000 000003e0 dea5fa6c 00000007 dea5fa50

[   52.917642] fa40: c010cf84 c010c61c 20000013 ffffffff

[   52.922723] Function entered at [] from []

[   52.928583]  r7:00000008 r6:41a6eb7e r5:00ffffff r4:de918000

[   52.934303] Function entered at [] from []

[   52.940171] Function entered at [] from []

[   52.946033] Function entered at [] from []

[   52.951900] Function entered at [] from []

[   52.957761] Function entered at [] from []

[   52.963628] Function entered at [] from []

[   52.969490] Function entered at [] from []

[   52.975356] Function entered at [] from []

[   52.981216] Function entered at [] from []

[   52.987069] Function entered at [] from []

[   52.992936] Function entered at [] from []

[   52.998797] Function entered at [] from []

[   53.004664]  r5:00000000 r4:dea5fe90

[   53.008267] Function entered at [] from []

[   53.014135] Function entered at [] from []

[   53.020002]  r8:00000000 r7:dea5ff70 r6:0083b7f0 r5:00001000 r4:dea255c0

[   53.026771] Function entered at [] from []

[   53.032638]  r8:00000000 r7:00000003 r6:00001000 r5:0083b7f0 r4:dea255c0

[   53.039406] Function entered at [] from []

[   53.045273]  r9:dea5e000 r8:c00091e4 r6:bed4c950 r5:00001000 r4:0083a0a0

[   53.052050] ---[ end trace e513d9622b338f3c ]---

自己折腾的过程:

1.wan口动态ip,lan口dhcp可以ping通路由器自己,也可ping通wan,还可以ping通www.baidu.com

2.在串口能get到www.baidu.com的网页,lan口就是不能访问互联网,ip地址也不行。

3.偶尔跳出opkg原厂固件已精简,现在我自己搞不定编译,这是个死胡同。

5.进去想看看能否修改认证模块文件,也不知怎么下手。

望高手指点。

openwrt+php+not+found,openwrt路由翻车,等高手相关推荐

  1. 水星路器服务器无响应,联想M720Q、光网卡、Pon stick、Openwrt我的完美软路由折腾记...

    联想M720Q.光网卡.Pon stick.Openwrt我的完美软路由折腾记 2020-11-11 15:43:09 26点赞 208收藏 74评论 一直以来就是个完美党(其实就是zuo) ,之前的 ...

  2. 智能路由器-OpenWRT 系列一 (OpenWRT 刷机)

    现在没有了网络,估计大家都不知道该怎么消遣娱乐了. 电影.音乐.聊天.视频 .网络资讯,缺了网络,什么都搞不起.不过随着上网的时间越来越久,就会发现家庭网络不怎么好用,或者说是家里的路由器不怎么好用. ...

  3. openwrt php 编译环境,openwrt基础编译教程

    从官网下载ubuntu,我下的是ubuntu 15.10(ubuntu-15.10-desktop-amd64) 打开终端 安装基础环境 sudo apt-get install build-esse ...

  4. openwrt劫持域名,openwrt使用DNS劫持实现访问域名访问web

    openwrt劫持域名,openwrt使用DNS劫持实现访问域名访问web 前阵子因为工作需要,要在中继器(openwrt使用WDS)wifi中继过程中登陆中继器的web. 由于WDS是工作做OSI7 ...

  5. openwrt开启文件服务器失败,OpenWrt搭建文件共享服务(NAS)

    1. 硬盘挂载 1.1 安装USB.fs的内核模块 opkg update opkg install kmod-usb-core kmod-usb-storage kmod-usb-ohci kmod ...

  6. openwrt nas_NAS里整个软路由

    目前在群晖218+里做了个openwrt的虚拟机,主要是担心硬路由华硕AC66uB1上科学不够给力,虽然koolshare给更新了1.0.4版,但最近JMS延时高得惊人,xbox美服根本无法正常联机. ...

  7. [路由][教程]OpenWrt通过LAN连接上级路由做交换机+无线功能教程

    1. 前言 上级路由为ikuai软路由,数据处理交给软路由来做,OpenWrt运行在路由器上,通过LAN连接上级路由从而只做WIFI接收发送功能. 此教程只能将LAN作为交换机使用,WAN口不行! 2 ...

  8. 使用OpenWrt创建子网作为二级路由

    问题 有二个路由器:A是ISP安装的,作为光猫有LAN口并提供无线接入.B是原来的OpenWrt路由器.由于需要使用B路由器上的软件上网,觉得可以把B作为二级路由,找了些资料终于搞成功. 思路 A路由 ...

  9. 红米AX6S路由器刷OpenWrt固件,实现软路由功能,科学-上网-网速度起飞

    背景: 有时候,我们开发过程中需要使用到内网穿透.需要科学一下.但是每次都需要启动客户端,感觉可麻烦了.能不能把科学一下及内网穿透功能直接配置到路由器上呢?只要连接到这个wifi的就可以科学一下了.说 ...

最新文章

  1. 图解 Java 垃圾回收机制,写得非常好!
  2. VS.Net 开发 MSN一样缓慢出来的提示信息的方法
  3. 解决多线程同时读写一个文件的问题
  4. linux多线程编程和linux 2.6下的nptl,Linux多線程編程和Linux 2.6下的NPTL
  5. 【经典精读】Transformer模型深度解读
  6. ubuntu报警邮件服务简单搭建
  7. mybatis-plus配置日志
  8. 打印杨辉三角python
  9. Java单例模式双检锁原理
  10. Mac常用快捷键组合
  11. 服装计算机辅助设计论文,服装设计计算机辅助设计应用探索-服装设计论文-设计论文.docx...
  12. 商务网站建设与维护【15】
  13. 黄一老师:管理者需要知道的“三多”和“三少”
  14. AI 大数据在数据隐私保护下如何普惠共享?CCF TF「联邦学习」研讨会给出了答案
  15. CTO问我,为什么需要API网关?
  16. 《爱乐之城》月亮与六便士,你选哪个?
  17. 单片机看门狗是什么?工作原理?使用方法?
  18. 新手GPU详细配置步骤
  19. Spark支持三种分布式部署方式
  20. 以太坊私有链POA模式

热门文章

  1. Canvas--文字渲染
  2. NYOJ 305 表达式求值 (字符串处理)
  3. dumpbin命令问题的解决办法【原】
  4. Rocketmq介绍和安装
  5. CountDownLatch1.8源码
  6. H3C进入目录---用户视图
  7. Android开源框架:Universal-Image-Loader解析(四)TaskProcess
  8. Glassfish3 安装后登录时提示:Secure Admin must be enabled to access the DAS remotely
  9. 你造吗?这个属性值你写错了多少年?target=“_blank”
  10. 步步为营,重构出模式(2)