作者：BSXY_19计科_陈永跃 BSXY_信息学院注：未经允许禁止转发任何内容

基于MPLS-V**多分部互访的ensp企业网络规划与设计_ensp综合实验

前言及技术/资源下载说明（ **未经允许禁止转发任何内容** ）
- 插曲：基于eNSP中大型校园/企业网络规划与设计(可不看)
- 该网络规划的过程步骤（**顺着一步一步走**）
- - 1、VLAN底层划分&链路捆绑
  - 2、MSTP
  - 3、VRRP
  - 4、OSPF
  - 5、总部路由器配置
  - 6、分部1无线配置
  - 7、分部1路由器配置
  - 8、分部2路由器
  - 9、分部3路由器配置
  - 10、核心路由器地址配置&OSPF配置
  - 11、MPLS配置
  - 12、BGP
  - 13、VPN
  - 14、路由引入

前言及技术/资源下载说明（未经允许禁止转发任何内容）

有什么问题可以在评论区说明自己遇到的情况，博主看到会第一时间回复，希望其他人也可以回复别人的问题。
（后期有什么内容会在博文中进行修改和更新的）
可根据以下所提供的设计与实现步骤过程一步一步自行实现（每一条命令都是关键的命令）；但是如果有需要的也可以根据以下地址进行下载完整的topo图和完整的配置进行参考与借鉴，如若拿到topo图可多display查看配置，查看相应的命令，配套资源连接如下，相应的内容如下图所示：

基于MPLS-VPN多分部互访的ensp企业网络规划与设计.rar + 全程配置视频+可导入的配置文件

建议在做该综合实验的话多做几个MPLS VPN的实验和多看看有关MPLS VPN的知识，不然可能对着视频做出来也感觉莫名其妙

以上也就是topo图的规划，相应的地址规划和路由规划大部分都在图中明确的标注了
该实验中用到的技术有相应的vlan划分、链路捆绑、MSTP、VRRP、DHCP、OSPF、无线WLAN、静态路由、BGP、MPLS VPN、路由引入配置等等这些技术。对于视频的话可以开启1.25倍速观看。有什么问题的话，都可以在平台中私信于我。该实验非常适合于把相应的单个技术学完想把这些技术综合起来的小伙伴，且对于毕设课设的小伙伴可以进行参考，进行自己的规划与设计，最后对于软考网络工程师/网络规划设计的小伙伴来说个人建议是有必要抽个时间好好的做一下这个实验的，最后说明该topo规划最后的作者权归于：BSXY_信息学院_19计科_陈永跃

插曲：基于eNSP中大型校园/企业网络规划与设计(可不看)

插曲部分：基于eNSP中大型校园/企业网络规划与设计_综合大作业如下图所示（但是并不在该篇文章中做详细介绍和说明，如查看可点击连接自行查看阅读）：

该网络规划的过程步骤（顺着一步一步走）

命令是全的，不过对于很多人来说可能配置不全，自己单独完成不了这个实验，所以这边建议是以下的命令结合配置的视频来完成相应的实验，可能命令嘛就是起到一个辅助的用作在该实验中，花不了你多少米，因为这个基于MPLS VPN的综合实验可能很多朋友都会觉得比较的不好弄

1、VLAN底层划分&链路捆绑

 SW3:
<Huawei>sys
[Huawei]un in en
[Huawei]sysname SW3
[SW3]vlan batch 10 20
[SW3]int e0/0/1
[SW3-Ethernet0/0/1]port link-type access
[SW3-Ethernet0/0/1]port default vlan 10
[SW3-Ethernet0/0/1]int e0/0/2
[SW3-Ethernet0/0/2]port link-type access
[SW3-Ethernet0/0/2]port default vlan 20
[SW3-Ethernet0/0/2]qui
[SW3]port-group g e0/0/3 e0/0/4
[SW3-port-group]port link-type trunk
[SW3-Ethernet0/0/3]port link-type trunk
[SW3-Ethernet0/0/4]port link-type trunk
[SW3-port-group]port trunk allow-pass vlan all
[SW3-Ethernet0/0/3]port trunk allow-pass vlan all
[SW3-Ethernet0/0/4]port trunk allow-pass vlan all
[SW3-port-group]qui
[SW3]
------------------------------------SW4:
<Huawei>sys
[Huawei]un in en
[Huawei]sysname SW4
[SW4]vlan batch 10 20
[SW4]int e0/0/1
[SW4-Ethernet0/0/1]port link-type access
[SW4-Ethernet0/0/1]port default vlan 10
[SW4-Ethernet0/0/1]int e0/0/2
[SW4-Ethernet0/0/2]port link-type access
[SW4-Ethernet0/0/2]port default vlan 20
[SW4-Ethernet0/0/2]qui
[SW4]port-group g e0/0/3 e0/0/4
[SW4-port-group]port link-type trunk
[SW4-Ethernet0/0/3]port link-type trunk
[SW4-Ethernet0/0/4]port link-type trunk
[SW4-port-group]port trunk allow-pass vlan all
[SW4-Ethernet0/0/3]port trunk allow-pass vlan all
[SW4-Ethernet0/0/4]port trunk allow-pass vlan all
[SW4-port-group]qui
[SW4]
------------------------------------SW1:
<Huawei>sys
[Huawei]un in en
[Huawei]sysname SW1
[SW1]vlan batch 10 20 11
[SW1]port-group g g0/0/1 g0/0/2
[SW1-port-group]port link-type trunk
[SW1-GigabitEthernet0/0/1]port link-type trunk
[SW1-GigabitEthernet0/0/2]port link-type trunk
[SW1-port-group]port trunk allow-pass vlan all
[SW1-GigabitEthernet0/0/1]port trunk allow-pass vlan all
[SW1-GigabitEthernet0/0/2]port trunk allow-pass vlan all
[SW1-port-group]qui
[SW1]int g0/0/3
[SW1-GigabitEthernet0/0/3]port link-type access
[SW1-GigabitEthernet0/0/3]port default vlan 11
[SW1-GigabitEthernet0/0/3]qui
[SW1]int eth-trunk 1
[SW1-Eth-Trunk1]mode lacp-static
[SW1-Eth-Trunk1]trunkport g0/0/10
[SW1-Eth-Trunk1]trunkport g0/0/11
[SW1-Eth-Trunk1]port link-type trunk
[SW1-Eth-Trunk1]port trunk allow-pass vlan all
[SW1-Eth-Trunk1]qui
[SW1]
------------------------------------SW2:
<Huawei>sys
[Huawei]un in en
[Huawei]sysname SW2
[SW2]vlan batch 10 20 22
[SW2]port-group g g0/0/1 g0/0/2
[SW2-port-group]port link-type trunk
[SW2-GigabitEthernet0/0/1]port link-type trunk
[SW2-GigabitEthernet0/0/2]port link-type trunk
[SW2-port-group]port trunk allow-pass vlan all
[SW2-GigabitEthernet0/0/1]port trunk allow-pass vlan all
[SW2-GigabitEthernet0/0/2]port trunk allow-pass vlan all
[SW2-port-group]qui
[SW2]int g0/0/3
[SW2-GigabitEthernet0/0/3]port link-type access
[SW2-GigabitEthernet0/0/3]port default vlan 22
[SW2-GigabitEthernet0/0/3]qui
[SW2]int eth-trunk 1
[SW2-Eth-Trunk1]mode lacp-static
[SW2-Eth-Trunk1]trunkport g0/0/10
[SW2-Eth-Trunk1]trunkport g0/0/11
[SW2-Eth-Trunk1]port link-type trunk
[SW2-Eth-Trunk1]port trunk allow-pass vlan all
[SW2-Eth-Trunk1]qui
[SW2]dis eth-trunk 1

2、MSTP

 SW3:
[SW3]stp region-configuration
[SW3-mst-region]instance 1 vlan 10
[SW3-mst-region]instance 2 vlan 20
[SW3-mst-region]active region-configuration
[SW3-mst-region]qui
------------------------------------SW3:
[SW4]stp region-configuration
[SW4-mst-region]instance 1 vlan 10
[SW4-mst-region]instance 2 vlan 20
[SW4-mst-region]active region-configuration
[SW4-mst-region]qui
------------------------------------SW1:
[SW1]stp region-configuration
[SW1-mst-region]instance 1 vlan 10
[SW1-mst-region]instance 2 vlan 20
[SW1-mst-region]active region-configuration
[SW1-mst-region]qui
[SW1]stp instance 1 root primary
[SW1]stp instance 2 root secondary
[SW1]
------------------------------------SW2:
[SW2]stp region-configuration
[SW2-mst-region]instance 1 vlan 10
[SW2-mst-region]instance 2 vlan 20
[SW2-mst-region]active region-configuration
[SW2-mst-region]qui
[SW2]stp instance 2 root primary
[SW2]stp instance 1 root secondary
[SW2]

3、VRRP

 SW1:
[SW1]int vlan 10
[SW1-Vlanif10]ip add 10.1.10.253 24
[SW1-Vlanif10]vrrp vrid 10 virtual-ip 10.1.10.254
[SW1-Vlanif10]vrrp vrid 10 priority 120
[SW1-Vlanif10]qui
[SW1]int vlan 20
[SW1-Vlanif20]ip add 10.1.20.253 24
[SW1-Vlanif20]vrrp vrid 20 virtual-ip 10.1.20.254
[SW1-Vlanif20]qui
[SW1]int vlan 11
[SW1-Vlanif11]ip add 10.1.15.1 24
[SW1-Vlanif11]qui
[SW1]
------------------------------------SW2:
[SW2]int vlan 10
[SW2-Vlanif10]ip add 10.1.10.252 24
[SW2-Vlanif10]vrrp vrid 10 virtual-ip 10.1.10.254
[SW2-Vlanif10]qui
[SW2]int vlan 20
[SW2-Vlanif20]ip add 10.1.20.252 24
[SW2-Vlanif20]vrrp vrid 20 virtual-ip 10.1.20.254
[SW2-Vlanif20]vrrp vrid 20 priority 120
[SW2-Vlanif20]qui
[SW2]int vlan 22
[SW2-Vlanif22]ip add 10.1.25.2 24
[SW2-Vlanif22]qui
[SW2]dis vrrp br

4、OSPF

 SW2:
[SW2]ospf
[SW2-ospf-1]area 0
[SW2-ospf-1-area-0.0.0.0]net 10.1.25.0 0.0.0.255
[SW2-ospf-1-area-0.0.0.0]net 10.1.10.0 0.0.0.255
[SW2-ospf-1-area-0.0.0.0]net 10.1.20.0 0.0.0.255
[SW2-ospf-1-area-0.0.0.0]qui
[SW2-ospf-1]silent-interface vlanif 10
[SW2-ospf-1]silent-interface vlanif 20
[SW2-ospf-1]dis this
[SW2-ospf-1]qui
[SW2]
------------------------------------SW1:
[SW1]ospf
[SW1-ospf-1]area 0
[SW1-ospf-1-area-0.0.0.0]net 10.1.15.0 0.0.0.255
[SW1-ospf-1-area-0.0.0.0]net 10.1.10.0 0.0.0.255
[SW1-ospf-1-area-0.0.0.0]net 10.1.20.0 0.0.0.255
[SW1-ospf-1-area-0.0.0.0]qui
[SW1-ospf-1]silent-interface vlanif 10
[SW1-ospf-1]silent-interface vlanif 20
[SW1-ospf-1]dis this
[SW1-ospf-1]qui
[SW1]

5、总部路由器配置

 R5:
<Huawei>sys
[Huawei]un in en
[Huawei]sysname R5
[R5]int g0/0/2
[R5-GigabitEthernet0/0/2]ip add 10.1.51.5 24
[R5-GigabitEthernet0/0/2]int g0/0/0
[R5-GigabitEthernet0/0/0]ip add 10.1.15.5 24
[R5-GigabitEthernet0/0/0]int g0/0/1
[R5-GigabitEthernet0/0/1]ip add 10.1.25.5 24
[R5-GigabitEthernet0/0/1]qui
[R5]ospf
[R5-ospf-1]area 0
[R5-ospf-1-area-0.0.0.0]net 10.1.15.0 0.0.0.255
[R5-ospf-1-area-0.0.0.0]net 10.1.25.0 0.0.0.255
[R5-ospf-1-area-0.0.0.0]net 10.1.51.0 0.0.0.255
[R5-ospf-1-area-0.0.0.0]qui
[R5-ospf-1]qui
[R5]dis ospf peer br

6、分部1无线配置

 SW6:
<Huawei>sys
[Huawei]un in en
[Huawei]sysname SW6
[SW6]vlan batch 111 112
[SW6]port-group g g0/0/1 to g0/0/3
[SW6-port-group]port link-type trunk
[SW6-port-group]port trunk allow-pass vlan all
[SW6-port-group]qui
[SW6]int g0/0/3
[SW6-GigabitEthernet0/0/3]port trunk pvid vlan 111
[SW6-GigabitEthernet0/0/3]qui
[SW6]
------------------------------------AC：
<AC6605>sys
[AC6605]un in en
[AC6605]sysname AC
[AC]vlan batch 111 112
[AC]int g0/0/1
[AC-GigabitEthernet0/0/1]port link-type trunk
[AC-GigabitEthernet0/0/1]port trunk allow-pass vlan all
[AC-GigabitEthernet0/0/1]qui
[AC]dhcp enable
[AC]ip pool vlan
[AC-ip-pool-vlan]net 10.1.112.0 mask 24
[AC-ip-pool-vlan]gateway-list 10.1.112.254
[AC-ip-pool-vlan]qui
[AC]int vlan 111
[AC-Vlanif111]ip add 10.1.111.1 24
[AC-Vlanif111]dhcp select interface
[AC-Vlanif111]qui
[AC]int vlan 112
[AC-Vlanif112]ip add 10.1.112.1 24
[AC-Vlanif112]dhcp select global
[AC-Vlanif112]qui
[AC]capwap source int vlanif 111
[AC]wlan
[AC-wlan-view]security-profile name 1
[AC-wlan-sec-prof-1]security wpa2 psk pass-phrase a1234567 aes
[AC-wlan-sec-prof-1]qui
[AC-wlan-view]ssid-profile name 1
[AC-wlan-ssid-prof-1]ssid wlan-branch1
[AC-wlan-ssid-prof-1]qui
[AC-wlan-view]vap-profile name 1
[AC-wlan-vap-prof-1]security-profile 1
[AC-wlan-vap-prof-1]ssid-profile 1
[AC-wlan-vap-prof-1]service-vlan vlan-id 112
[AC-wlan-vap-prof-1]qui
[AC-wlan-view]ap-id 1 ap-mac 00e0-fcb6-5940
[AC-wlan-ap-1]vap-profile 1 wlan 1 radio all
[AC-wlan-ap-1]qui
[AC-wlan-view]qui
[AC]qui
<AC>save

7、分部1路由器配置

 R8:
<Huawei>sys
[Huawei]un in en
[Huawei]sysname R8
[R8]int g0/0/1.10
[R8-GigabitEthernet0/0/1.10]dot1q termination vid 112
[R8-GigabitEthernet0/0/1.10]ip address 10.1.112.254 255.255.255.0
[R8-GigabitEthernet0/0/1.10]arp broadcast enable
[R8-GigabitEthernet0/0/1.10]int g0/0/0
[R8-GigabitEthernet0/0/0]ip add 10.1.28.8 24
[R8-GigabitEthernet0/0/0]qui
[R8]bgp 65530
[R8-bgp]peer 10.1.28.2 as 100
[R8-bgp]net 10.1.112.0 24
[R8-bgp]dis this
#
bgp 65530peer 10.1.28.2 as-number 100 #ipv4-family unicastundo synchronizationnetwork 10.1.112.0 255.255.255.0 peer 10.1.28.2 enable
#
[R8-bgp]qui
[R8]

8、分部2路由器

 R6:
<Huawei>sys
[Huawei]un in en
[Huawei]sysname R6
[R6]int g0/0/0
[R6-GigabitEthernet0/0/0]ip add 172.16.45.5 24
[R6-GigabitEthernet0/0/0]qui
[R6]dhcp enable
[R6]int g0/0/1
[R6-GigabitEthernet0/0/1]ip add 172.16.1.254 24
[R6-GigabitEthernet0/0/1]dhcp select interface
[R6-GigabitEthernet0/0/1]qui
[R6]ospf
[R6-ospf-1]area 0
[R6-ospf-1-area-0.0.0.0]net 172.16.1.0 0.0.0.25
[R6-ospf-1-area-0.0.0.0]net 172.16.45.0 0.0.0.255
[R6-ospf-1-area-0.0.0.0]qui
[R6-ospf-1]qui
[R6]qui
<R6>save

9、分部3路由器配置

<Huawei>sys
[Huawei]un in en
[Huawei]sysname R7
[R7]int g0/0/0
[R7-GigabitEthernet0/0/0]ip add 192.168.1.254 24
[R7-GigabitEthernet0/0/0]int g0/0/1
[R7-GigabitEthernet0/0/1]ip add 192.168.37.7 24
[R7-GigabitEthernet0/0/1]qui
[R7]ip route-static 0.0.0.0 0 192.168.37.3
[R7]qui
<R7>save

10、核心路由器地址配置&OSPF配置

 R2:
<Huawei>sys
[Huawei]un in en
[Huawei]sysname R2
[R2]int g4/0/0
[R2-GigabitEthernet4/0/0]ip add 23.1.1.2 24
[R2-GigabitEthernet4/0/0]int g0/0/1
[R2-GigabitEthernet0/0/1]ip add 29.1.1.2 24
[R2-GigabitEthernet0/0/1]int g0/0/2
[R2-GigabitEthernet0/0/2]ip add 12.1.1.2 24
[R2-GigabitEthernet0/0/2]qui
[R2]int loo0
[R2-LoopBack0]ip add 2.2.2.2 32
[R2-LoopBack0]qui
[R2]ospf 2 router-id 2.2.2.2
[R2-ospf-2]area 0
[R2-ospf-2-area-0.0.0.0]net 2.2.2.2 0.0.0.0
[R2-ospf-2-area-0.0.0.0]net 29.1.1.0 0.0.0.255
[R2-ospf-2-area-0.0.0.0]net 12.1.1.0 0.0.0.255
[R2-ospf-2-area-0.0.0.0]net 23.1.1.0 0.0.0.255
[R2-ospf-2-area-0.0.0.0]qui
[R2-ospf-2]qui
[R2]
------------------------------------R1:
<Huawei>sys
[Huawei]un in en
[Huawei]sysname R1
[R1]int g0/0/1
[R1-GigabitEthernet0/0/1]ip add 12.1.1.1 24
[R1-GigabitEthernet0/0/1]int g0/0/2
[R1-GigabitEthernet0/0/2]ip add 19.1.1.1 24
[R1-GigabitEthernet0/0/2]int g4/0/0
[R1-GigabitEthernet4/0/0]ip add 14.1.1.1 24
[R1-GigabitEthernet4/0/0]qui
[R1]int loo0
[R1-LoopBack0]ip add 1.1.1.1 32
[R1-LoopBack0]qui
[R1]ospf 2 router-id 1.1.1.1
[R1-ospf-2]area 0
[R1-ospf-2-area-0.0.0.0]net 1.1.1.1 0.0.0.0
[R1-ospf-2-area-0.0.0.0]net 12.1.1.0 0.0.0.255
[R1-ospf-2-area-0.0.0.0]net 19.1.1.0 0.0.0.255
[R1-ospf-2-area-0.0.0.0]net 14.1.1.0 0.0.0.255
[R1-ospf-2-area-0.0.0.0]qui
[R1-ospf-2]qui
[R1]
------------------------------------R9:
<Huawei>sys
[Huawei]un in en
[Huawei]sysname R9
[R9]int g0/0/0
[R9-GigabitEthernet0/0/0]ip add 29.1.1.9 24
[R9-GigabitEthernet0/0/0]int g0/0/1
[R9-GigabitEthernet0/0/1]ip add 19.1.1.9 24
[R9-GigabitEthernet0/0/1]int g0/0/2
[R9-GigabitEthernet0/0/2]ip add 39.1.1.9 24
[R9-GigabitEthernet0/0/2]int g6/0/0
[R9-GigabitEthernet6/0/0]ip add 49.1.1.9 24
[R9-GigabitEthernet6/0/0]qui
[R9]int loo0
[R9-LoopBack0]ip add 9.9.9.9 32
[R9-LoopBack0]qui
[R9]ospf 2 router-id 9.9.9.9
[R9-ospf-2]area 0
[R9-ospf-2-area-0.0.0.0]net 9.9.9.9 0.0.0.0
[R9-ospf-2-area-0.0.0.0]net 19.1.1.0 0.0.0.255
[R9-ospf-2-area-0.0.0.0]net 29.1.1.0 0.0.0.255
[R9-ospf-2-area-0.0.0.0]net 39.1.1.0 0.0.0.255
[R9-ospf-2-area-0.0.0.0]net 49.1.1.0 0.0.0.255
[R9-ospf-2-area-0.0.0.0]qui
[R9-ospf-2]qui
[R9]
------------------------------------R3:
<Huawei>sys
[Huawei]un in en
[Huawei]sysname R3
[R3]
[R3]int g0/0/1
[R3-GigabitEthernet0/0/1]ip add 23.1.1.3 24
[R3-GigabitEthernet0/0/1]int g0/0/0
[R3-GigabitEthernet0/0/0]ip add 39.1.1.3 24
[R3-GigabitEthernet0/0/0]int g0/0/2
[R3-GigabitEthernet0/0/2]ip add 34.1.1.3 24
[R3-GigabitEthernet0/0/2]qui
[R3]int loo0
[R3-LoopBack0]ip add 3.3.3.3 32
[R3-LoopBack0]qui
[R3]ospf 2 router-id 3.3.3.3
[R3-ospf-2]area 0
[R3-ospf-2-area-0.0.0.0]net 3.3.3.3 0.0.0.0
[R3-ospf-2-area-0.0.0.0]net 23.1.1.0 0.0.0.255
[R3-ospf-2-area-0.0.0.0]net 34.1.1.0 0.0.0.255
[R3-ospf-2-area-0.0.0.0]net 39.1.1.0 0.0.0.255
[R3-ospf-2-area-0.0.0.0]qui
[R3-ospf-2]qui
[R3]
------------------------------------R4:
<Huawei>sys
[Huawei]un in en
[Huawei]sysname R4
[R4]int g0/0/1
[R4-GigabitEthernet0/0/1]ip add 34.1.1.4 24
[R4-GigabitEthernet0/0/1]int g0/0/2
[R4-GigabitEthernet0/0/2]ip add 49.1.1.4 24
[R4-GigabitEthernet0/0/2]int g0/0/0
[R4-GigabitEthernet0/0/0]ip add 14.1.1.4 24
[R4-GigabitEthernet0/0/0]qui
[R4]int loo0
[R4-LoopBack0]ip add 4.4.4.4 32
[R4-LoopBack0]qui
[R4]ospf 2 router-id 4.4.4.4
[R4-ospf-2]area 0
[R4-ospf-2-area-0.0.0.0]net 4.4.4.4 0.0.0.0
[R4-ospf-2-area-0.0.0.0]net 14.1.1.0 0.0.0.255
[R4-ospf-2-area-0.0.0.0]net 49.1.1.0 0.0.0.255
[R4-ospf-2-area-0.0.0.0]net 34.1.1.0 0.0.0.255
[R4-ospf-2-area-0.0.0.0]qui
[R4-ospf-2]qui
[R4]

11、MPLS配置

 R2:
[R2]mpls lsr-id 2.2.2.2
[R2]mpls
[R2-mpls]mpls ldp
[R2-mpls-ldp]qui
[R2]int g4/0/0
[R2-GigabitEthernet4/0/0]mpls
[R2-GigabitEthernet4/0/0]mpls ldp
[R2-GigabitEthernet4/0/0]int g0/0/1
[R2-GigabitEthernet0/0/1]mpls
[R2-GigabitEthernet0/0/1]mpls ldp
[R2-GigabitEthernet0/0/1]int g0/0/2
[R2-GigabitEthernet0/0/2]mpls
[R2-GigabitEthernet0/0/2]mpls ldp
[R2-GigabitEthernet0/0/2]qui
[R2]
------------------------------------R1:
[R1]mpls lsr-id 1.1.1.1
[R1]mpls
[R1-mpls]mpls ldp
[R1-mpls-ldp]qui
[R1]int g4/0/0
[R1-GigabitEthernet4/0/0]mpls
[R1-GigabitEthernet4/0/0]mpls ldp
[R1-GigabitEthernet4/0/0]int g0/0/1
[R1-GigabitEthernet0/0/1]mpls
[R1-GigabitEthernet0/0/1]mpls ldp
[R1-GigabitEthernet0/0/1]int g0/0/2
[R1-GigabitEthernet0/0/2]mpls
[R1-GigabitEthernet0/0/2]mpls ldp
[R1-GigabitEthernet0/0/2]qui
[R1]
------------------------------------R9:
[R9]mpls lsr-id 9.9.9.9
[R9]mpls
[R9-mpls]mpls ldp
[R9-mpls-ldp]qui
[R9]int g0/0/0
[R9-GigabitEthernet0/0/0]mpls
[R9-GigabitEthernet0/0/0]mpls ldp
[R9-GigabitEthernet0/0/0]int g0/0/2
[R9-GigabitEthernet0/0/2]mpls
[R9-GigabitEthernet0/0/2]mpls ldp
[R9-GigabitEthernet0/0/2]int g0/0/1
[R9-GigabitEthernet0/0/1]mpls
[R9-GigabitEthernet0/0/1]mpls ldp
[R9-GigabitEthernet0/0/1]int g6/0/0
[R9-GigabitEthernet6/0/0]mpls
[R9-GigabitEthernet6/0/0]mpls ldp
[R9-GigabitEthernet6/0/0]qui
[R9]
------------------------------------R3:
[R3]mpls lsr-id 3.3.3.3
[R3]mpls
[R3-mpls]mpls ldp
[R3-mpls-ldp]qui
[R3]int g0/0/1
[R3-GigabitEthernet0/0/1]mpls
[R3-GigabitEthernet0/0/1]mpls ldp
[R3-GigabitEthernet0/0/1]int g0/0/2
[R3-GigabitEthernet0/0/2]mpls
[R3-GigabitEthernet0/0/2]mpls ldp
[R3-GigabitEthernet0/0/2]int g0/0/0
[R3-GigabitEthernet0/0/0]mpls
[R3-GigabitEthernet0/0/0]mpls ldp
[R3-GigabitEthernet0/0/0]qui
[R3]
------------------------------------R4:
[R4]mpls lsr-id 4.4.4.4
[R4]mpls
[R4-mpls]mpls ldp
[R4-mpls-ldp]qui
[R4]int g0/0/1
[R4-GigabitEthernet0/0/1]mpls
[R4-GigabitEthernet0/0/1]mpls ldp
[R4-GigabitEthernet0/0/1]int g0/0/2
[R4-GigabitEthernet0/0/2]mpls
[R4-GigabitEthernet0/0/2]mpls ldp
[R4-GigabitEthernet0/0/2]int g0/0/0
[R4-GigabitEthernet0/0/0]mpls
[R4-GigabitEthernet0/0/0]mpls ldp
[R4-GigabitEthernet0/0/0]qui
[R4]

12、BGP

 R2:
[R2]bgp 100
[R2-bgp]peer 9.9.9.9 as 100
[R2-bgp]peer 9.9.9.9 con loo0
[R2-bgp]ipv4-family vpnv4
[R2-bgp-af-vpnv4]peer 9.9.9.9 enable
[R2-bgp-af-vpnv4]qui
[R2-bgp]dis this
#
bgp 100peer 9.9.9.9 as-number 100 peer 9.9.9.9 connect-interface LoopBack0#ipv4-family unicastundo synchronizationpeer 9.9.9.9 enable# ipv4-family vpnv4policy vpn-targetpeer 9.9.9.9 enable
#
[R2-bgp]qui
[R2]
------------------------------------R1:
[R1]bgp 100
[R1-bgp]peer 9.9.9.9 as 100
[R1-bgp]peer 9.9.9.9 con loo0
[R1-bgp]ipv4-family vpnv4
[R1-bgp-af-vpnv4]peer 9.9.9.9 enable
[R1-bgp-af-vpnv4]qui
[R1-bgp]qui
[R1]
------------------------------------R3:
[R3]bgp 100
[R3-bgp]peer 9.9.9.9 as 100
[R3-bgp]peer 9.9.9.9 con loo0
[R3-bgp]ipv4-family vpnv4
[R3-bgp-af-vpnv4]peer 9.9.9.9 enable
[R3-bgp-af-vpnv4]qui
[R3-bgp]qui
[R3]
------------------------------------R4:
[R4]bgp 100
[R4-bgp]peer 9.9.9.9 as 100
[R4-bgp]peer 9.9.9.9 con loo0
[R4-bgp]ipv4-family vpnv4
[R4-bgp-af-vpnv4]peer 9.9.9.9 enable
[R4-bgp-af-vpnv4]qui
[R4-bgp]qui
[R4]
------------------------------------R9:
[R9]bgp 100
[R9-bgp]peer 2.2.2.2 as 100
[R9-bgp]peer 2.2.2.2 con loo0
[R9-bgp]peer 3.3.3.3 as 100
[R9-bgp]peer 3.3.3.3 con loo0
[R9-bgp]peer 1.1.1.1 as 100
[R9-bgp]peer 1.1.1.1 con loo0
[R9-bgp]peer 4.4.4.4 as 100
[R9-bgp]peer 4.4.4.4 con loo0
[R9-bgp]ipv4-family vpnv4
[R9-bgp-af-vpnv4]undo policy vpn-target
[R9-bgp-af-vpnv4]peer 2.2.2.2 enable
[R9-bgp-af-vpnv4]peer 2.2.2.2 reflect-client
[R9-bgp-af-vpnv4]peer 3.3.3.3 enable
[R9-bgp-af-vpnv4]peer 3.3.3.3 reflect-client
[R9-bgp-af-vpnv4]peer 1.1.1.1 enable
[R9-bgp-af-vpnv4]peer 1.1.1.1 reflect-client
[R9-bgp-af-vpnv4]peer 4.4.4.4 enable
[R9-bgp-af-vpnv4]peer 4.4.4.4 reflect-client
[R9-bgp-af-vpnv4]qui
[R9-bgp]dis this
#
bgp 100peer 1.1.1.1 as-number 100 peer 1.1.1.1 connect-interface LoopBack0peer 2.2.2.2 as-number 100 peer 2.2.2.2 connect-interface LoopBack0peer 3.3.3.3 as-number 100 peer 3.3.3.3 connect-interface LoopBack0peer 4.4.4.4 as-number 100 peer 4.4.4.4 connect-interface LoopBack0#ipv4-family unicastundo synchronizationpeer 1.1.1.1 enablepeer 2.2.2.2 enablepeer 3.3.3.3 enablepeer 4.4.4.4 enable# ipv4-family vpnv4undo policy vpn-targetpeer 1.1.1.1 enablepeer 1.1.1.1 reflect-clientpeer 2.2.2.2 enablepeer 2.2.2.2 reflect-clientpeer 3.3.3.3 enablepeer 3.3.3.3 reflect-clientpeer 4.4.4.4 enablepeer 4.4.4.4 reflect-client
#
[R9-bgp]qui
[R9]

13、VPN

 R2:
[R2]ip vpn-instance vpna
[R2-vpn-instance-vpna]route-distinguisher 1:1
[R2-vpn-instance-vpna-af-ipv4]vpn-target 1:1
[R2-vpn-instance-vpna-af-ipv4]qui
[R2-vpn-instance-vpna]qui
[R2]int g0/0/0
[R2-GigabitEthernet0/0/0]ip binding vpn-instance vpna
[R2-GigabitEthernet0/0/0]ip add 10.1.28.2 24
[R2-GigabitEthernet0/0/0]dis this
#
interface GigabitEthernet0/0/0ip binding vpn-instance vpnaip address 10.1.28.2 255.255.255.0
#
[R2-GigabitEthernet0/0/0]qui
[R2]bgp 100
[R2-bgp]ipv4-family vpn-instance vpna
[R2-bgp-vpna]peer 10.1.28.8 as 65530
[R2-bgp]qui
[R2]dis bgp vpnv4 all peer
[R2]dis bgp vpnv4 all routing-tableR3:
[R3]ip vpn-instance vpnc
[R3-vpn-instance-vpnc]route-distinguisher 2:1
[R3-vpn-instance-vpnc-af-ipv4]vpn-target 1:1
[R3-vpn-instance-vpnc-af-ipv4]qui
[R3-vpn-instance-vpnc]qui
[R3]int g4/0/0
[R3-GigabitEthernet4/0/0]ip binding vpn-instance vpnc
[R3-GigabitEthernet4/0/0]ip add 192.168.37.3 24
[R3-GigabitEthernet4/0/0]qui
[R3]ip route-static vpn-instance vpnc 192.168.1.0 24 192.168.37.7
[R3]dis ip routing-table vpn-instance vpncR1:
[R1]ip vpn-instance vpn
[R1-vpn-instance-vpn]route-distinguisher 3:1
[R1-vpn-instance-vpn-af-ipv4]vpn-target 1:1
[R1-vpn-instance-vpn-af-ipv4]qui
[R1-vpn-instance-vpn]qui
[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ip binding vpn-instance vpn
[R1-GigabitEthernet0/0/0]ip add 10.1.51.1 24
[R1-GigabitEthernet0/0/0]qui
[R1]ospf 1 vpn-instance vpn
[R1-ospf-1]area 0
[R1-ospf-1-area-0.0.0.0]net 10.1.51.0 0.0.0.255
[R1-ospf-1-area-0.0.0.0]qui
[R1-ospf-1]qui
[R1]dis ip routing-table vpn-instance vpnR4:
[R4]ip vpn-instance vpnb
[R4-vpn-instance-vpnb]route-distinguisher 4:1
[R4-vpn-instance-vpnb-af-ipv4]vpn-target 1:1
[R4-vpn-instance-vpnb-af-ipv4]qui
[R4-vpn-instance-vpnb]qui
[R4]int g4/0/0
[R4-GigabitEthernet4/0/0]ip binding vpn-instance vpnb
[R4-GigabitEthernet4/0/0]ip add 172.16.45.4 24
[R4-GigabitEthernet4/0/0]qui
[R4]ospf 1 vpn-instance vpnb
[R4-ospf-1]area 0
[R4-ospf-1-area-0.0.0.0]net 172.16.45.0 0.0.0.255
[R4-ospf-1-area-0.0.0.0]qui
[R4-ospf-1]qui
[R4]dis ip routing-table vpn-instance vpnb

14、路由引入

 R1:
[R1]bgp 100
[R1-bgp]ipv4-family vpn-instance vpn
[R1-bgp-vpn]import-route ospf 1
[R1-bgp-vpn]qui
[R1-bgp]qui
[R1]ospf
[R1-ospf-1]import-route bgp
[R1-ospf-1]qui
[R1]R4:
[R4]bgp 100
[R4-bgp]ipv4-family vpn-instance vpnb
[R4-bgp-vpnb]import-route ospf 1
[R4-bgp-vpnb]qui
[R4-bgp]qui
[R4]ospf
[R4-ospf-1]import-route bgp
[R4-ospf-1]dis this
#
ospf 1 vpn-instance vpnbimport-route bgparea 0.0.0.0 network 172.16.45.0 0.0.0.255
#
[R4-ospf-1]qui
[R4]R3:
[R3]bgp 100
[R3-bgp]ipv4-family vpn-instance vpnc
[R3-bgp-vpnc]import-route static
[R3-bgp-vpnc]qui
[R3-bgp]qui
[R3]dis ip routing-table vpn-instance vpnc

基于MPLS-V**多分部互访的ensp企业网络规划与设计_ensp综合实验相关推荐

基于eNSP中大型校园/企业网络规划与设计_ensp综合大作业(ensp综合实验)
作者:BSXY_19计科_陈永跃 BSXY_信息学院注:未经允许禁止转发任何内容基于eNSP中大型校园/企业网络规划与设计_综合大作业(ensp综合实验) 前言及技术/资源下载说明( **未经允许 ...
基于eNSP的IPv6校园网络规划与设计_综合实验
作者:BSXY_19计科_陈永跃 BSXY_信息学院注:未经允许禁止转发任何内容基于eNSP的IPv6校园网络规划与设计(综合实验) 前言及技术/资源下载说明( **未经允许禁止转发任何内容** ...
基于eNSP加防火墙的千人中型校园/企业网络规划与设计(一步一步走)
作者:BSXY_19计科_陈永跃 BSXY_信息学院_名片v位于结尾处注:未经允许禁止转发任何内容基于eNSP加防火墙的千人中型校园/企业网络规划与设计前言及资源下载说明( **未经允许禁止转发 ...
华为ensp——企业网络的设计与实现【具体配置】
企业网络的设计与实现--具体配置本次实验在华为ensp模拟器具体实现. 文章目录企业网络的设计与实现--具体配置拓扑图网段划分办公区 VLAN+端口配置(二层) 无线网络配置 DHCP配置 ...
eNSP综合实验合集（eNSP综合大作业合集）_可先收藏
作者:BSXY_19计科_陈永跃 BSXY_信息学院注:未经允许禁止转发任何内容 **注:在该文章中就只对ensp综合实验做一个总结和归纳,只给出相应的topo图和需求说明和对应的文章的连接.有什么 ...
基于eNSP的IPv4加IPv6的企业/校园网络规划设计(综合实验/大作业)
作者:BSXY_19计科_陈永跃 BSXY_信息学院_名片v位于结尾处注:未经允许禁止转发任何内容基于eNSP的IPv4加IPv6的企业/校园网络规划设计_综合实验/大作业前言及技术/资源下载说 ...
基于ensp防火墙双击热备二层网络规划与设计
作者:BSXY_19计科_陈永跃 BSXY_信息学院注:未经允许禁止转发任何内容基于ensp防火墙双击热备二层网络规划与设计前言及资源下载一.设计topo与要求(15个要求) 二.插曲:基于e ...
基于MPLS ×××城域网的设计(下篇
6 IP城域网MPLS ×××的未来市场趋势通过对IP城域网MPLS ×××的设计,可以看出基于MPLS技术的MPLS ×××,在灵活性.扩展性.安全性各个方面是当前技术最先进的××× .此外,MP ...
基于MPLS ×××城域网设计
4 ××× 技术在教育城域网中的应用近几年,各级教育部门为落实教育部有关加快教育信息化建设的精神, 许多学校先后建成了规模不一的校园网或网络教室.教育信息化建设硬件环境已初具规模,为了充分利用这些校 ...

基于MPLS-V**多分部互访的ensp企业网络规划与设计_ensp综合实验

作者：BSXY_19计科_陈永跃 BSXY_信息学院注：未经允许禁止转发任何内容

基于MPLS-V**多分部互访的ensp企业网络规划与设计_ensp综合实验

前言及技术/资源下载说明（未经允许禁止转发任何内容）

插曲：基于eNSP中大型校园/企业网络规划与设计(可不看)

该网络规划的过程步骤（顺着一步一步走）

1、VLAN底层划分&链路捆绑

2、MSTP

3、VRRP

4、OSPF

5、总部路由器配置

6、分部1无线配置

7、分部1路由器配置

8、分部2路由器

9、分部3路由器配置

10、核心路由器地址配置&OSPF配置

11、MPLS配置

12、BGP

13、VPN

14、路由引入

基于MPLS-V**多分部互访的ensp企业网络规划与设计_ensp综合实验相关推荐

最新文章

热门文章

基于MPLS-V**多分部互访的ensp企业网络规划与设计_ensp综合实验

作者：BSXY_19计科_陈永跃 BSXY_信息学院 注：未经允许禁止转发任何内容

基于MPLS-V**多分部互访的ensp企业网络规划与设计_ensp综合实验

前言及技术/资源下载说明（ 未经允许禁止转发任何内容 ）

插曲：基于eNSP中大型校园/企业网络规划与设计(可不看)

该网络规划的过程步骤（顺着一步一步走）

1、VLAN底层划分&链路捆绑

2、MSTP

3、VRRP

4、OSPF

5、总部路由器配置

6、分部1无线配置

7、分部1路由器配置

8、分部2路由器

9、分部3路由器配置

10、核心路由器地址配置&OSPF配置

11、MPLS配置

12、BGP

13、VPN

14、路由引入

基于MPLS-V**多分部互访的ensp企业网络规划与设计_ensp综合实验相关推荐

最新文章

热门文章

作者：BSXY_19计科_陈永跃 BSXY_信息学院注：未经允许禁止转发任何内容

前言及技术/资源下载说明（未经允许禁止转发任何内容）