3KAB，贴片五脚芯片规格书

3KAC，3KAB，3KAL，3KAQ，3KAW，3KAE，3KAR，3KAT，3KAY，3KAU，3KAI，3KA1，3KAO，3KA0

锂电池充电芯片，SOT23-5封装，贴片五脚芯片规格书：
GENERAL DESCRIPTION
The PW4055 is a complete constant-current /constant-voltage linear charger for single cell lithiumion batteries.Its ThinSOT package and low external component count make the PW4055 ideally suited for portable applications.Furthermore, the PW4055 is specifically designed to work within USB power specifications.
The PW4055 No external sense resistor is needed, and no blocking diode is required due to the internal MOSFET architecture.Thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. The charge voltage is fixed at 4.2V, and the charge current can be programmed externally with a single resistor. The PW4055 automatically terminates the charge cycle when the charge current drops to 1/10th the programmed value after the final float voltage is reached. When the input supply (wall adapter or USB supply) is removed, the PW4055 automatically enters a low current state, dropping the battery drain current to less than 2µA. The PW4055 can be put into shutdown mode, reducing the supply current to 25µA.
The BAT pin has a 7KV ESD(HBM) capability. Other features include charge current monitor, undervoltage lockout, automatic recharge and a status pin to indicate charge termination and the presence of an input voltage.
FEATURES
⚫ Programmable Charge Current Up to500mA
⚫ Complete Linear Charger in ThinSOT Package for single Cell Lithium-Ion Batteries
⚫ Constant-Current/Constant-Voltage Operation with Thermal Regulation to Maximize Charge Rate Without Risk of Overheating
⚫ Charges Single Cell Li-Ion Batteries Directly from USB Port
⚫ Charge Current Monitor Output for Gas Gauging
⚫ Automatic Recharge
⚫ Charge Status Output Pin
⚫ C/10 Charge Termination
⚫ Soft-Start Limits Inrush Current
⚫ 7KV ESD(HBM) capability
APPLICATIONS
⚫ Cellular Telephones, PDAs, MP3 Players
⚫ Charging Docks and Cradles
⚫ Bluetooth Applications

3KAB，贴片五脚芯片规格书相关推荐

LTH7五脚芯片的完整方案图FS4054充电电路原理
LTH7贴片5脚充电芯片 FS4054 单节的锂电池保护电路单节为3.7V锂电池(也叫4.2V)和3.8V锂电池(也叫4.35V) 单节的锂电池充电电路 4.2V的LTH7芯片, FS4054,4. ...
LTH7五脚芯片的完整方案图
内容目录: A,LTH7贴片5脚充电芯片 PW4054 单节的锂电池保护电路单节为3.7V锂电池(也叫4.2V)和3.8V锂电池(也叫4.35V) 单节的锂电池充电电路 ...
LTHTB五脚充电芯片规格书,LTH7B规格书
2KAX五脚电源芯片，2KAX锂电池充电IC资料
2KAX 是一个完善的单片锂离子电池恒流/恒压线形电源管理芯片. 它薄的尺寸和小的外包装使它适用于便携式产品的应用.更值得一提的是, 2KAX专门设计适用于 USB的供电规格.得益于内部的 MOSFE ...
A79T三极管，A79T芯片规格书
A79T三极管的基本参数:VDS = -30V,ID = -4.2A,RDS(ON) < 65mΩ @ VGS=-10V A79T芯片采用SOT23-3L环保材质的封装形式.A79T是一颗P沟道 ...
五脚18.8数码管显示
五脚18.8数码管显示今天抽空用将五脚的18.8数码管驱动程序研究了一下,将其过程记录如下: 数字1到5表示对应的数码管引脚,利用二极管的单向导通性来点亮单独的LED 数码管需要亮灯的高低电平点亮, ...
MTK-MT6771芯片资料，最新的MT6771芯片规格书原理图设计资料
MTK-MT6771芯片资料,最新的MT6771芯片规格书原理图设计资料 MT6771即p60具有集成的蓝牙.fm.wlan和gps模块,是一个高度集成的基带平台,包括调制解调器和应用处理子系统,启用 ...
RK3399芯片规格书，RK3399参考设计方案
RK3399芯片规格书,RK3399参考设计方案较新的RK3368虽然专门针对电视盒子做了优化,但是其硬件性能相比上一代的RK3288还要孱弱,老当益壮的RK3288退休不得,与RK3368勉力维持 ...
杰理之芯片规格书【篇】
芯片指标:设计前需要了解芯片的指标是否符合产品要求,应该从芯片规格书获取到对应的参数指标,另外原理图配置 IO 的时候也需要了解 IO 属性.下面以 AD6976D 为例,从规格书提取相关数据(电压域 ...

3KAB，贴片五脚芯片规格书

3KAB，贴片五脚芯片规格书相关推荐

最新文章

热门文章