环境：

交换机一：
华为S5735S-L24T4S-MA
Software Version V200R019C10SPC500

交换机二：
华为S5735S-L24T4S-A
Software Version V200R019C10SPC500

堆叠口：电口

问题描述：

华为交换机S5735S如何堆叠iStack

解决方案：

堆叠前前往华为网站查询是否支持
https://info.support.huawei.com/network/virtual/index?lang=zh

本案例堆叠口：电口

以太网电接口要求
Category 5及以上标准网线
1Gbit/s

用以太网电接口或100/1000BASE-X以太网光接口做堆叠口时，单设备最多支持2个逻辑堆叠口，每个逻辑堆叠口可以包含1个物理成员口，也可以包含多个物理成员口，最多包含8个物理成员口，单设备最大支持16个物理成员口。

1.查看交换机软件版本是否一致

交换机一：

<HUAWEI>dis ver
Huawei Versatile Routing Platform Software
VRP (R) software, Version 5.170 (S5735 V200R019C10SPC500)
Copyright (C) 2000-2020 HUAWEI TECH Co., Ltd.
HUAWEI S5735S-L24T4S-MA Routing Switch uptime is 0 week, 0 day, 0 hour, 8 minutesES5D2T28S022 0(Master)  : uptime is 0 week, 0 day, 0 hour, 7 minutes
DDR             Memory Size : 1024  M bytes
FLASH Total     Memory Size : 512   M bytes
FLASH Available Memory Size : 306   M bytes
Pcb           Version   : VER.D
BootROM(1st)       Version   : 0000.0121
BootROM(2nd)       Version   : 0000.0200
BootLoad      Version   : 0213.0000
CPLD          Version   : 0107
Software      Version   : VRP (R) Software, Version 5.170 (V200R019C10SPC500)
FLASH         Version   : 0000.0000

交换机二：

<HUAWEI>dis ver
Huawei Versatile Routing Platform Software
VRP (R) software, Version 5.170 (S5735 V200R019C10SPC500)
Copyright (C) 2000-2020 HUAWEI TECH Co., Ltd.
HUAWEI S5735S-L24T4S-A Routing Switch uptime is 0 week, 0 day, 1 hour, 42 minutesES5D2T28S022 0(Master)  : uptime is 0 week, 0 day, 1 hour, 41 minutes
DDR             Memory Size : 1024  M bytes
FLASH Total     Memory Size : 512   M bytes
FLASH Available Memory Size : 306   M bytes
Pcb           Version   : VER.B
BootROM(1st)       Version   : 0000.0121
BootROM(2nd)       Version   : 0000.0200
BootLoad      Version   : 0213.0000
CPLD          Version   : 0107
Software      Version   : VRP (R) Software, Version 5.170 (V200R019C10SPC500)
FLASH         Version   : 0000.0000

2.堆叠配置
先把堆叠线缆连接好

交换机一：

<HUAWEI>sy
Enter system view, return user view with Ctrl+Z.[HUAWEI]sysname STSW1
[STSW1][STSW1]i g0/0/28
[STSW1-GigabitEthernet0/0/28]shutdown
[STSW1-GigabitEthernet0/0/28]
May  7 2022 01:52:20 STSW1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.191.3.1 configurations have been changed. The current change number is 7, the change loop count is 0, and the maximum number of records is 4095.
[STSW1-GigabitEthernet0/0/28][STSW1-GigabitEthernet0/0/28]q[STSW1]interface stack-port 0/1
[STSW1-stack-port0/1]port interface GigabitEthernet 0/0/28 enableWarning: Enabling stack function may cause configuration loss on the interface. Continue? [Y/N]:y
Info: This operation may take a few seconds. Please wait...
[STSW1-stack-port0/1]
May  7 2022 01:54:52 STSW1 %%01IFNET/4/IF_DISABLE(l)[0]:Interface GigabitEthernet0/0/28 has been unavailable.
May  7 2022 01:54:52 STSW1 %%01IFNET/4/IF_ENABLE(l)[1]:Interface GigabitEthernet0/0/28 has been available.设置优先级为200
[STSW1]stack slot 0 priority 200
Warning: Do not frequently modify the priority because it will make the stack split. Continue? [Y/N]:
Error: Please choose 'YES' or 'NO' first before pressing 'Enter'. [Y/N]:y保存配置
<STSW1>sa
The current configuration will be written to the device.
Are you sure to continue?[Y/N]y

交换机二：

<HUAWEI>sy
Enter system view, return user view with Ctrl+Z.
[HUAWEI]sysname STSW2
[STSW2]i g0/0/28
[STSW2-GigabitEthernet0/0/28]shutdown
[STSW2-GigabitEthernet0/0/28]
[STSW2-GigabitEthernet0/0/28]q[STSW2]stack slot 0 renumber 1
[STSW2]q
[STSW2]reboot
# 默认100，华为是1-255，值越大优先级越高会被推举为Master
[SWB]stack slot 0 priority 10
[SWB]interface stack-port 1/2
[STSW2-stack-port1/1]port  interface GigabitEthernet 1/0/28 enable
Warning: Enabling stack function may cause configuration loss on the interface. Continue? [Y/N]:y
Info: This operation may take a few seconds. Please wait...
[STSW2-stack-port1/1]
Nov  9 2021 04:34:23 STSW2 %%01IFNET/4/IF_DISABLE(l)[0]:Interface GigabitEthernet1/0/28 has been unavailable.
Nov  9 2021 04:34:24 STSW2 %%01IFNET/4/IF_ENABLE(l)[1]:Interface GigabitEthernet1/0/28 has been available.保存配置
<STSW2>sa
The current configuration will be written to the device.
Are you sure to continue?[Y/N]y

3.查看堆叠完成配置
dis cu
2台堆叠成一台，查看随便一台配置信息都一样

4.堆叠删除成员

[STSW1]interface stack-port 0/1
[STSW1-stack-port0/1]shutdown i g0/0/28
Info: This operation may take a few seconds. Please wait...succeeded.
[STSW1-stack-port0/1]undo port interface GigabitEthernet 0/0/28 enable
Warning: Deleting member ports may cause stack split and a loss of all configurations on the interface. Continue? [Y/N]:y
Info: This operation may take a few seconds. Please wait....
[STSW1-stack-port0/1]
May  7 2022 05:42:35 STSW1 %%01IFNET/4/IF_DISABLE(l)[1]:Interface GigabitEthernet0/0/28 has been unavailable.
May  7 2022 05:42:35 STSW1 %%01IFNET/4/IF_ENABLE(l)[2]:Interface GigabitEthernet0/0/28 has been available.
[STSW1-stack-port0/1]

华为交换机S5735S如何堆叠iStack相关推荐

华为交换机业务口堆叠
http://blog.sina.com.cn/s/blog_4c86552f0102x0si.html 华为支持多台交换机间通过普通业务口组成堆叠实现统一管理和跨交换机的eth-trunk以提升冗余 ...
详解华为交换机iStack特性
以下内容摘自正在当当网.京东网预售,即将正式发售的<华为交换机学习指南>一书.本书是国内第一本,也是唯一一本华为交换机权威学习指南,是华为ICT认证培训指定教材,全书近千页!!当当网链接: ...
华为交换机详细堆叠教程
华为堆叠讲解众所周知华为分为如下堆叠: iStack (Intelligent Stack)盒式交换机 CSS(Cluster Switch System)框式交换机(集群) 上图园区组网拓扑采用C ...
s5720找mac 华为交换机_【基础】交换机堆叠模式
关注我,你的眼睛会怀孕堆叠是指将一台以上的交换机组合起来共同工作,以便在有限的空间内提供尽可能多的端口.多台交换机经过堆叠形成一个堆叠单元.可堆叠的交换机性能指标中有一个"最大可堆叠数&q ...
华为交换机S5720-EI堆叠
华为交换机S5720-EI堆叠一.背景公司机房里有两台S5720-EI交换机,都是以级联的方式连接核心交换机,为了简化网络拓扑提高网络的冗余性,对两台设备进行堆叠. 二.前期准备 1.准备好一对堆 ...
华为交换机清除堆叠命令
华为交换机清除堆叠命令方式一: <HUAWEI> system-view [HUAWEI] reset stack configuration 方式二: [HUAWEI] stack s ...
s6730堆叠_华为交换机S6720-EI堆叠示例
堆叠前须知堆叠iStack(Intelligent Stack),是指将多台支持堆叠特性的交换机设备组合在一起,从逻辑上组合成一台交换设备.SwitchA与SwitchB通过堆叠线缆连接后组成堆叠i ...
配置华为交换机堆叠命令
华为交换机堆叠配置命令如下: 配置交换机堆叠角色: system-view stackrole stacking
华为交换机堆叠如何进行主备倒换
环境: 交换机一: 华为S5735S-L24T4S-MA Software Version V200R019C10SPC500 交换机二: 华为S5735S-L24T4S-A Software Ver ...

华为交换机S5735S如何堆叠iStack

环境：

问题描述：

解决方案：

华为交换机S5735S如何堆叠iStack相关推荐

最新文章

热门文章