php curlesslcacert,Shipyard集群化docker管理平台部署
Shipyard部署
shipyard是一个docker的管理平台，新版本更新后，功能有很大的提升。
部署方式：容器部署master+slave
一：管理端master部署：#sh shipyard_master.sh
shipyard_master.sh#!/bin/bash
#######################################
#Need Images
#shipyard/shipyard:latest
#swarm:latest
#ehazlett/docker-proxy:latest
#alpine:latest
#microbox/etcd:latest
#rethinkdb
#######################################
if [ "$1" != "" ] && [ "$1" = "-h" ]; then
echo "Shipyard Deploy uses the following environment variables:"
echo " ACTION: this is the action to use (deploy, upgrade, node, remove)"
echo " DISCOVERY: discovery system used by Swarm (only if using 'node' action)"
echo " IMAGE: this overrides the default Shipyard p_w_picpath"
echo " PREFIX: prefix for container names"
echo " SHIPYARD_ARGS: these are passed to the Shipyard controller container as controller args"
echo " TLS_CERT_PATH: path to certs to enable TLS for Shipyard"
echo " PORT: specify the listen port for the controller (default: 8080)"
echo " PROXY_PORT: port to run docker proxy (default: 2375)"
exit 1
fi
if [ -z "`which docker`" ]; then
echo "You must have the Docker CLI installed on your \$PATH"
echo " See http://docs.docker.com for details"
exit 1
fi
ACTION=${ACTION:-deploy}
IMAGE=${IMAGE:-shipyard/shipyard:latest}
PREFIX=${PREFIX:-shipyard}
SHIPYARD_ARGS=${SHIPYARD_ARGS:-""}
TLS_CERT_PATH=${TLS_CERT_PATH:-}
CERT_PATH="/etc/shipyard"
PROXY_PORT=${PROXY_PORT:-2375}
SWARM_PORT=3375
SHIPYARD_PROTOCOL=http
SHIPYARD_PORT=${PORT:-8080}
DISCOVERY_BACKEND=etcd
DISCOVERY_PORT=4001
DISCOVERY_PEER_PORT=7001
ENABLE_TLS=0
CERT_FINGERPRINT=""
LOCAL_CA_CERT=""
LOCAL_SSL_CERT=""
LOCAL_SSL_KEY=""
LOCAL_SSL_CLIENT_CERT=""
LOCAL_SSL_CLIENT_KEY=""
SSL_CA_CERT=""
SSL_CERT=""
SSL_KEY=""
SSL_CLIENT_CERT=""
SSL_CLIENT_KEY=""
show_cert_help() {
echo "To use TLS in Shipyard, you must have existing certificates."
echo "The certs must be named ca.pem, server.pem, server-key.pem, cert.pem and key.pem"
echo "If you need to generate certificates, see https://github.com/ehazlett/certm for examples."
}
check_certs() {
if [ -z "$TLS_CERT_PATH" ]; then
return
fi
if [ ! -e $TLS_CERT_PATH ]; then
echo "Error: unable to find certificates in $TLS_CERT_PATH"
show_cert_help
exit 1
fi
if [ "$PROXY_PORT" = "2375" ]; then
PROXY_PORT=2376
fi
SWARM_PORT=3376
SHIPYARD_PROTOCOL=https
LOCAL_SSL_CA_CERT="$TLS_CERT_PATH/ca.pem"
LOCAL_SSL_CERT="$TLS_CERT_PATH/server.pem"
LOCAL_SSL_KEY="$TLS_CERT_PATH/server-key.pem"
LOCAL_SSL_CLIENT_CERT="$TLS_CERT_PATH/cert.pem"
LOCAL_SSL_CLIENT_KEY="$TLS_CERT_PATH/key.pem"
SSL_CA_CERT="$CERT_PATH/ca.pem"
SSL_CERT="$CERT_PATH/server.pem"
SSL_KEY="$CERT_PATH/server-key.pem"
SSL_CLIENT_CERT="$CERT_PATH/cert.pem"
SSL_CLIENT_KEY="$CERT_PATH/key.pem"
CERT_FINGERPRINT=$(openssl x509 -noout -in $LOCAL_SSL_CERT -fingerprint -sha256 | awk -F= '{print $2;}')
if [ ! -e $LOCAL_SSL_CA_CERT ] || [ ! -e $LOCAL_SSL_CERT ] || [ ! -e $LOCAL_SSL_KEY ] || [ ! -e $LOCAL_SSL_CLIENT_CERT ] || [ ! -e $LOCAL_SSL_CLIENT_KEY ]; then
echo "Error: unable to find certificates"
show_cert_help
exit 1
fi
ENABLE_TLS=1
}
# container functions
start_certs() {
ID=$(docker run \
-ti \
-d \
--restart=always \
--name $PREFIX-certs \
-v $CERT_PATH \
alpine \
sh)
if [ $ENABLE_TLS = 1 ]; then
docker cp $LOCAL_SSL_CA_CERT $PREFIX-certs:$SSL_CA_CERT
docker cp $LOCAL_SSL_CERT $PREFIX-certs:$SSL_CERT
docker cp $LOCAL_SSL_KEY $PREFIX-certs:$SSL_KEY
docker cp $LOCAL_SSL_CLIENT_CERT $PREFIX-certs:$SSL_CLIENT_CERT
docker cp $LOCAL_SSL_CLIENT_KEY $PREFIX-certs:$SSL_CLIENT_KEY
fi
}
remove_certs() {
docker rm -fv $PREFIX-certs > /dev/null 2>&1
}
get_ip() {
SHIPYARD_IP=`docker run --rm --net=host alpine ip route get 8.8.8.8 | awk '{ print $7; }'`
}
start_discovery() {
get_ip
ID=$(docker run \
-ti \
-d \
-p 4001:4001 \
-p 7001:7001 \
--restart=always \
--name $PREFIX-discovery \
microbox/etcd:latest -addr $SHIPYARD_IP:$DISCOVERY_PORT -peer-addr $SHIPYARD_IP:$DISCOVERY_PEER_PORT)
}
remove_discovery() {
docker rm -fv $PREFIX-discovery > /dev/null 2>&1
}
start_rethinkdb() {
ID=$(docker run \
-ti \
-d \
--restart=always \
--name $PREFIX-rethinkdb \
rethinkdb)
}
remove_rethinkdb() {
docker rm -fv $PREFIX-rethinkdb > /dev/null 2>&1
}
start_proxy() {
TLS_OPTS=""
if [ $ENABLE_TLS = 1 ]; then
TLS_OPTS="-e SSL_CA=$SSL_CA_CERT -e SSL_CERT=$SSL_CERT -e SSL_KEY=$SSL_KEY -e SSL_SKIP_VERIFY=1"
fi
# Note: we add SSL_SKIP_VERIFY=1 to skip verification of the client
# certificate in the proxy p_w_picpath. this will pass it to swarm that
# does verify. this helps with performance and avoids certificate issues
# when running through the proxy. ultimately if the cert is invalid
# swarm will fail to return.
ID=$(docker run \
-ti \
-d \
-p $PROXY_PORT:$PROXY_PORT \
--hostname=$HOSTNAME \
--restart=always \
--name $PREFIX-proxy \
-v /var/run/docker.sock:/var/run/docker.sock \
-e PORT=$PROXY_PORT \
--volumes-from=$PREFIX-certs $TLS_OPTS\
ehazlett/docker-proxy:latest)
}
remove_proxy() {
docker rm -fv $PREFIX-proxy > /dev/null 2>&1
}
start_swarm_manager() {
get_ip
TLS_OPTS=""
if [ $ENABLE_TLS = 1 ]; then
TLS_OPTS="--tlsverify --tlscacert=$SSL_CA_CERT --tlscert=$SSL_CERT --tlskey=$SSL_KEY"
fi
EXTRA_RUN_OPTS=""
if [ -z "$DISCOVERY" ]; then
DISCOVERY="$DISCOVERY_BACKEND://discovery:$DISCOVERY_PORT"
EXTRA_RUN_OPTS="--link $PREFIX-discovery:discovery"
fi
ID=$(docker run \
-ti \
-d \
--restart=always \
--name $PREFIX-swarm-manager \
--volumes-from=$PREFIX-certs $EXTRA_RUN_OPTS \
swarm:latest \
m --replication --addr $SHIPYARD_IP:$SWARM_PORT --host tcp://0.0.0.0:$SWARM_PORT $TLS_OPTS $DISCOVERY)
}
remove_swarm_manager() {
docker rm -fv $PREFIX-swarm-manager > /dev/null 2>&1
}
start_swarm_agent() {
get_ip
if [ -z "$DISCOVERY" ]; then
DISCOVERY="$DISCOVERY_BACKEND://discovery:$DISCOVERY_PORT"
EXTRA_RUN_OPTS="--link $PREFIX-discovery:discovery"
fi
ID=$(docker run \
-ti \
-d \
--restart=always \
--name $PREFIX-swarm-agent $EXTRA_RUN_OPTS \
swarm:latest \
j --addr $SHIPYARD_IP:$PROXY_PORT $DISCOVERY)
}
remove_swarm_agent() {
docker rm -fv $PREFIX-swarm-agent > /dev/null 2>&1
}
start_controller() {
#-v $CERT_PATH:/etc/docker:ro \
TLS_OPTS=""
if [ $ENABLE_TLS = 1 ]; then
TLS_OPTS="--tls-ca-cert $SSL_CA_CERT --tls-cert=$SSL_CERT --tls-key=$SSL_KEY --shipyard-tls-ca-cert=$SSL_CA_CERT --shipyard-tls-cert=$SSL_CERT --shipyard-tls-key=$SSL_KEY"
fi
ID=$(docker run \
-ti \
-d \
--restart=always \
--name $PREFIX-controller \
--link $PREFIX-rethinkdb:rethinkdb \
--link $PREFIX-swarm-manager:swarm \
-p $SHIPYARD_PORT:$SHIPYARD_PORT \
--volumes-from=$PREFIX-certs \
$IMAGE \
--debug \
server \
--listen :$SHIPYARD_PORT \
-d tcp://swarm:$SWARM_PORT $TLS_OPTS $SHIPYARD_ARGS)
}
wait_for_available() {
set +e
IP=$1
PORT=$2
echo Waiting for Shipyard on $IP:$PORT
docker pull ehazlett/curl > /dev/null 2>&1
TLS_OPTS=""
if [ $ENABLE_TLS = 1 ]; then
TLS_OPTS="-k"
fi
until $(docker run --rm ehazlett/curl --output /dev/null --connect-timeout 1 --silent --head --fail $TLS_OPTS $SHIPYARD_PROTOCOL://$IP:$PORT/ > /dev/null 2>&1); do
printf '.'
sleep 1
done
printf '\n'
}
remove_controller() {
docker rm -fv $PREFIX-controller > /dev/null 2>&1
}
if [ "$ACTION" = "deploy" ]; then
set -e
check_certs
get_ip
echo "Deploying Shipyard"
echo " -> Starting Database"
start_rethinkdb
echo " -> Starting Discovery"
start_discovery
echo " -> Starting Cert Volume"
start_certs
echo " -> Starting Proxy"
start_proxy
echo " -> Starting Swarm Manager"
start_swarm_manager
echo " -> Starting Swarm Agent"
start_swarm_agent
echo " -> Starting Controller"
start_controller
wait_for_available $SHIPYARD_IP $SHIPYARD_PORT
echo "Shipyard available at $SHIPYARD_PROTOCOL://$SHIPYARD_IP:$SHIPYARD_PORT"
if [ $ENABLE_TLS = 1 ] && [ ! -z "$CERT_FINGERPRINT" ]; then
echo "SSL SHA-256 Fingerprint: $CERT_FINGERPRINT"
fi
echo "Username: admin Password: shipyard"
elif [ "$ACTION" = "node" ]; then
set -e
if [ -z "$DISCOVERY" ]; then
echo "You must set the DISCOVERY environment variable"
echo "with the discovery system used with Swarm"
exit 1
fi
check_certs
echo "Adding Node"
echo " -> Starting Cert Volume"
start_certs
echo " -> Starting Proxy"
start_proxy
echo " -> Starting Swarm Manager"
start_swarm_manager $DISCOVERY
echo " -> Starting Swarm Agent"
start_swarm_agent
echo "Node added to Swarm: $SHIPYARD_IP"
elif [ "$ACTION" = "upgrade" ]; then
set -e
check_certs
get_ip
echo "Upgrading Shipyard"
echo " -> Pulling $IMAGE"
docker pull $IMAGE
echo " -> Upgrading Controller"
remove_controller
start_controller
wait_for_available $SHIPYARD_IP 8080
echo "Shipyard controller updated"
elif [ "$ACTION" = "remove" ]; then
# ignore errors
set +e
echo "Removing Shipyard"
echo " -> Removing Database"
remove_rethinkdb
echo " -> Removing Discovery"
remove_discovery
echo " -> Removing Cert Volume"
remove_certs
echo " -> Removing Proxy"
remove_proxy
echo " -> Removing Swarm Agent"
remove_swarm_agent
echo " -> Removing Swarm Manager"
remove_swarm_manager
echo " -> Removing Controller"
remove_controller
echo "Done"
else
echo "Unknown action $ACTION"
exit 1
fi
二：部署slave端(添加host)#sh shipyard_slave.sh
shipyard_slave.sh (修改DISCOVERY=etcd://master_ip:4001)
#!/bin/bash
#######################################
#Need Images
#shipyard/shipyard:latest
#swarm:latest
#ehazlett/docker-proxy:latest
#alpine:latest
#microbox/etcd:latest
#rethinkdb
#######################################
ACTION=node
#######################################
#IP is master ip
DISCOVERY=etcd://10.64.5.167:4001
#######################################
if [ "$1" != "" ] && [ "$1" = "-h" ]; then
echo "Shipyard Deploy uses the following environment variables:"
echo " ACTION: this is the action to use (deploy, upgrade, node, remove)"
echo " DISCOVERY: discovery system used by Swarm (only if using 'node' action)"
echo " IMAGE: this overrides the default Shipyard p_w_picpath"
echo " PREFIX: prefix for container names"
echo " SHIPYARD_ARGS: these are passed to the Shipyard controller container as controller args"
echo " TLS_CERT_PATH: path to certs to enable TLS for Shipyard"
echo " PORT: specify the listen port for the controller (default: 8080)"
echo " PROXY_PORT: port to run docker proxy (default: 2375)"
exit 1
fi
if [ -z "`which docker`" ]; then
echo "You must have the Docker CLI installed on your \$PATH"
echo " See http://docs.docker.com for details"
exit 1
fi
ACTION=${ACTION:-deploy}
IMAGE=${IMAGE:-shipyard/shipyard:latest}
PREFIX=${PREFIX:-shipyard}
SHIPYARD_ARGS=${SHIPYARD_ARGS:-""}
TLS_CERT_PATH=${TLS_CERT_PATH:-}
CERT_PATH="/etc/shipyard"
PROXY_PORT=${PROXY_PORT:-2375}
SWARM_PORT=3375
SHIPYARD_PROTOCOL=http
SHIPYARD_PORT=${PORT:-8080}
DISCOVERY_BACKEND=etcd
DISCOVERY_PORT=4001
DISCOVERY_PEER_PORT=7001
ENABLE_TLS=0
CERT_FINGERPRINT=""
LOCAL_CA_CERT=""
LOCAL_SSL_CERT=""
LOCAL_SSL_KEY=""
LOCAL_SSL_CLIENT_CERT=""
LOCAL_SSL_CLIENT_KEY=""
SSL_CA_CERT=""
SSL_CERT=""
SSL_KEY=""
SSL_CLIENT_CERT=""
SSL_CLIENT_KEY=""
show_cert_help() {
echo "To use TLS in Shipyard, you must have existing certificates."
echo "The certs must be named ca.pem, server.pem, server-key.pem, cert.pem and key.pem"
echo "If you need to generate certificates, see https://github.com/ehazlett/certm for examples."
}
check_certs() {
if [ -z "$TLS_CERT_PATH" ]; then
return
fi
if [ ! -e $TLS_CERT_PATH ]; then
echo "Error: unable to find certificates in $TLS_CERT_PATH"
show_cert_help
exit 1
fi
if [ "$PROXY_PORT" = "2375" ]; then
PROXY_PORT=2376
fi
SWARM_PORT=3376
SHIPYARD_PROTOCOL=https
LOCAL_SSL_CA_CERT="$TLS_CERT_PATH/ca.pem"
LOCAL_SSL_CERT="$TLS_CERT_PATH/server.pem"
LOCAL_SSL_KEY="$TLS_CERT_PATH/server-key.pem"
LOCAL_SSL_CLIENT_CERT="$TLS_CERT_PATH/cert.pem"
LOCAL_SSL_CLIENT_KEY="$TLS_CERT_PATH/key.pem"
SSL_CA_CERT="$CERT_PATH/ca.pem"
SSL_CERT="$CERT_PATH/server.pem"
SSL_KEY="$CERT_PATH/server-key.pem"
SSL_CLIENT_CERT="$CERT_PATH/cert.pem"
SSL_CLIENT_KEY="$CERT_PATH/key.pem"
CERT_FINGERPRINT=$(openssl x509 -noout -in $LOCAL_SSL_CERT -fingerprint -sha256 | awk -F= '{print $2;}')
if [ ! -e $LOCAL_SSL_CA_CERT ] || [ ! -e $LOCAL_SSL_CERT ] || [ ! -e $LOCAL_SSL_KEY ] || [ ! -e $LOCAL_SSL_CLIENT_CERT ] || [ ! -e $LOCAL_SSL_CLIENT_KEY ]; then
echo "Error: unable to find certificates"
show_cert_help
exit 1
fi
ENABLE_TLS=1
}
# container functions
start_certs() {
ID=$(docker run \
-ti \
-d \
--restart=always \
--name $PREFIX-certs \
-v $CERT_PATH \
alpine \
sh)
if [ $ENABLE_TLS = 1 ]; then
docker cp $LOCAL_SSL_CA_CERT $PREFIX-certs:$SSL_CA_CERT
docker cp $LOCAL_SSL_CERT $PREFIX-certs:$SSL_CERT
docker cp $LOCAL_SSL_KEY $PREFIX-certs:$SSL_KEY
docker cp $LOCAL_SSL_CLIENT_CERT $PREFIX-certs:$SSL_CLIENT_CERT
docker cp $LOCAL_SSL_CLIENT_KEY $PREFIX-certs:$SSL_CLIENT_KEY
fi
}
remove_certs() {
docker rm -fv $PREFIX-certs > /dev/null 2>&1
}
get_ip() {
SHIPYARD_IP=`docker run --rm --net=host alpine ip route get 8.8.8.8 | awk '{ print $7; }'`
}
start_discovery() {
get_ip
ID=$(docker run \
-ti \
-d \
-p 4001:4001 \
-p 7001:7001 \
--restart=always \
--name $PREFIX-discovery \
microbox/etcd:latest -addr $SHIPYARD_IP:$DISCOVERY_PORT -peer-addr $SHIPYARD_IP:$DISCOVERY_PEER_PORT)
}
remove_discovery() {
docker rm -fv $PREFIX-discovery > /dev/null 2>&1
}
start_rethinkdb() {
ID=$(docker run \
-ti \
-d \
--restart=always \
--name $PREFIX-rethinkdb \
rethinkdb)
}
remove_rethinkdb() {
docker rm -fv $PREFIX-rethinkdb > /dev/null 2>&1
}
start_proxy() {
TLS_OPTS=""
if [ $ENABLE_TLS = 1 ]; then
TLS_OPTS="-e SSL_CA=$SSL_CA_CERT -e SSL_CERT=$SSL_CERT -e SSL_KEY=$SSL_KEY -e SSL_SKIP_VERIFY=1"
fi
# Note: we add SSL_SKIP_VERIFY=1 to skip verification of the client
# certificate in the proxy p_w_picpath. this will pass it to swarm that
# does verify. this helps with performance and avoids certificate issues
# when running through the proxy. ultimately if the cert is invalid
# swarm will fail to return.
ID=$(docker run \
-ti \
-d \
-p $PROXY_PORT:$PROXY_PORT \
--hostname=$HOSTNAME \
--restart=always \
--name $PREFIX-proxy \
-v /var/run/docker.sock:/var/run/docker.sock \
-e PORT=$PROXY_PORT \
--volumes-from=$PREFIX-certs $TLS_OPTS\
ehazlett/docker-proxy:latest)
}
remove_proxy() {
docker rm -fv $PREFIX-proxy > /dev/null 2>&1
}
start_swarm_manager() {
get_ip
TLS_OPTS=""
if [ $ENABLE_TLS = 1 ]; then
TLS_OPTS="--tlsverify --tlscacert=$SSL_CA_CERT --tlscert=$SSL_CERT --tlskey=$SSL_KEY"
fi
EXTRA_RUN_OPTS=""
if [ -z "$DISCOVERY" ]; then
DISCOVERY="$DISCOVERY_BACKEND://discovery:$DISCOVERY_PORT"
EXTRA_RUN_OPTS="--link $PREFIX-discovery:discovery"
fi
ID=$(docker run \
-ti \
-d \
--restart=always \
--name $PREFIX-swarm-manager \
--volumes-from=$PREFIX-certs $EXTRA_RUN_OPTS \
swarm:latest \
m --replication --addr $SHIPYARD_IP:$SWARM_PORT --host tcp://0.0.0.0:$SWARM_PORT $TLS_OPTS $DISCOVERY)
}
remove_swarm_manager() {
docker rm -fv $PREFIX-swarm-manager > /dev/null 2>&1
}
start_swarm_agent() {
get_ip
if [ -z "$DISCOVERY" ]; then
DISCOVERY="$DISCOVERY_BACKEND://discovery:$DISCOVERY_PORT"
EXTRA_RUN_OPTS="--link $PREFIX-discovery:discovery"
fi
ID=$(docker run \
-ti \
-d \
--restart=always \
--name $PREFIX-swarm-agent $EXTRA_RUN_OPTS \
swarm:latest \
j --addr $SHIPYARD_IP:$PROXY_PORT $DISCOVERY)
}
remove_swarm_agent() {
docker rm -fv $PREFIX-swarm-agent > /dev/null 2>&1
}
start_controller() {
#-v $CERT_PATH:/etc/docker:ro \
TLS_OPTS=""
if [ $ENABLE_TLS = 1 ]; then
TLS_OPTS="--tls-ca-cert $SSL_CA_CERT --tls-cert=$SSL_CERT --tls-key=$SSL_KEY --shipyard-tls-ca-cert=$SSL_CA_CERT --shipyard-tls-cert=$SSL_CERT --shipyard-tls-key=$SSL_KEY"
fi
ID=$(docker run \
-ti \
-d \
--restart=always \
--name $PREFIX-controller \
--link $PREFIX-rethinkdb:rethinkdb \
--link $PREFIX-swarm-manager:swarm \
-p $SHIPYARD_PORT:$SHIPYARD_PORT \
--volumes-from=$PREFIX-certs \
$IMAGE \
--debug \
server \
--listen :$SHIPYARD_PORT \
-d tcp://swarm:$SWARM_PORT $TLS_OPTS $SHIPYARD_ARGS)
}
wait_for_available() {
set +e
IP=$1
PORT=$2
echo Waiting for Shipyard on $IP:$PORT
docker pull ehazlett/curl > /dev/null 2>&1
TLS_OPTS=""
if [ $ENABLE_TLS = 1 ]; then
TLS_OPTS="-k"
fi
until $(docker run --rm ehazlett/curl --output /dev/null --connect-timeout 1 --silent --head --fail $TLS_OPTS $SHIPYARD_PROTOCOL://$IP:$PORT/ > /dev/null 2>&1); do
printf '.'
sleep 1
done
printf '\n'
}
remove_controller() {
docker rm -fv $PREFIX-controller > /dev/null 2>&1
}
if [ "$ACTION" = "deploy" ]; then
set -e
check_certs
get_ip
echo "Deploying Shipyard"
echo " -> Starting Database"
start_rethinkdb
echo " -> Starting Discovery"
start_discovery
echo " -> Starting Cert Volume"
start_certs
echo " -> Starting Proxy"
start_proxy
echo " -> Starting Swarm Manager"
start_swarm_manager
echo " -> Starting Swarm Agent"
start_swarm_agent
echo " -> Starting Controller"
start_controller
wait_for_available $SHIPYARD_IP $SHIPYARD_PORT
echo "Shipyard available at $SHIPYARD_PROTOCOL://$SHIPYARD_IP:$SHIPYARD_PORT"
if [ $ENABLE_TLS = 1 ] && [ ! -z "$CERT_FINGERPRINT" ]; then
echo "SSL SHA-256 Fingerprint: $CERT_FINGERPRINT"
fi
echo "Username: admin Password: shipyard"
elif [ "$ACTION" = "node" ]; then
set -e
if [ -z "$DISCOVERY" ]; then
echo "You must set the DISCOVERY environment variable"
echo "with the discovery system used with Swarm"
exit 1
fi
check_certs
echo "Adding Node"
echo " -> Starting Cert Volume"
start_certs
echo " -> Starting Proxy"
start_proxy
echo " -> Starting Swarm Manager"
start_swarm_manager $DISCOVERY
echo " -> Starting Swarm Agent"
start_swarm_agent
echo "Node added to Swarm: $SHIPYARD_IP"
elif [ "$ACTION" = "upgrade" ]; then
set -e
check_certs
get_ip
echo "Upgrading Shipyard"
echo " -> Pulling $IMAGE"
docker pull $IMAGE
echo " -> Upgrading Controller"
remove_controller
start_controller
wait_for_available $SHIPYARD_IP 8080
echo "Shipyard controller updated"
elif [ "$ACTION" = "remove" ]; then
# ignore errors
set +e
echo "Removing Shipyard"
echo " -> Removing Database"
remove_rethinkdb
echo " -> Removing Discovery"
remove_discovery
echo " -> Removing Cert Volume"
remove_certs
echo " -> Removing Proxy"
remove_proxy
echo " -> Removing Swarm Agent"
remove_swarm_agent
echo " -> Removing Swarm Manager"
remove_swarm_manager
echo " -> Removing Controller"
remove_controller
echo "Done"
else
echo "Unknown action $ACTION"
exit 1
fi
php curlesslcacert,Shipyard集群化docker管理平台部署相关推荐
- Rancher集群化docker管理平台部署、特性及破坏性测试。
http://8941355.blog.51cto.com/8931355/1712683 rancher是一个docker集群化管理平台,相对于mesos和k8s架构,rancher的部署管理非常简 ...
- 【360开源】Wayne：企业级可视化多集群Kubernetes一站式管理平台
宣言 Wayne是由360搜索云平台团队开发的,一个通用的.基于Web的Kubernetes多集群一站式可视化管理平台.内置了丰富多样的功能,满足企业的通用需求,同时插件化的方式可以方便集成定制化功能 ...
- 发布一个免费的 Elasticsearch 多集群监控和管理平台 - 极限数据平台
随着单个 Elasticsearch 集群规模的越来越大,大家要么在拆集群的路上,要么是已经是多套集群了, 据路边社消息,一个公司超过5个集群的情况已经变得非常普遍,而管理多个集群着实是有点痛苦,比如 ...
- 【云原生】第十篇--Docker主机集群化方案 Docker Swarm
Docker主机集群化方案 Docker Swarm 一.docker swarm介绍 二.docker swarm概念与架构 2.1 架构 2.2 概念 三.docker swarm集群部署 3.1 ...
- docker.10-Docker主机集群化方案 Docker Swarm
Docker主机集群化方案 Docker Swarm 一.docker swarm介绍 Docker Swarm是Docker官方提供的一款集群管理工具,其主要作用是把若干台Docker主机抽象为一个 ...
- Docker Swarm集群secrets中管理敏感数据
在Swarm集群中管理敏感数据 以往管理敏感数据的姿势通常是 密钥放镜像中.设置环境变量.volume动态挂载等.Docker目前提供了secrets管理功能,用户可以在Swarm集群中安全地管理密码 ...
- docker集群——介绍Mesos+Zookeeper+Marathon的Docker管理平台
容器为用户打开了一扇通往新世界的大门,真正进入这个容器的世界后,却发现新的生态系统如此庞大.在生产使用中,不论个人还是企业,都会提出更复杂的需求.这时,我们需要众多跨主机的容器协同工作,需要支持各种类 ...
- .netcore 如何获取系统中所有session_集群化部署，Spring Security 要如何处理 session 共享？
前面和大家聊了 Spring Security 如何像 QQ 一样,自动踢掉已登录用户(Spring Boot + Vue 前后端分离项目,如何踢掉已登录用户?),但是前面我们是基于单体应用的,如果我 ...
- rancher安装mysql_四、rancher搭建Mysql集群化部署，做到同步备份
一.Rancher基础镜像查找: 1.基础镜像操作地址:https://hub.docker.com/r/library/mariadb/ 2.选择自己需要的镜像进行搜索,里面有对应版本:也有最新的如 ...
- 如何实现 集群化/Session 复制-doc(cluster-howto.html)
源文档链接: http://tomcat.apache.org/tomcat-6.0-doc/cluster-howto.html 翻译日期: 2014年3月19日 翻译人员: 铁锚 感受: Tomc ...
最新文章
- vim删除文件所有内容
- linux c 内存操作函数 简介
- vue 中使用promise
- 概率统计笔记：威沙特分布（Wishart Distribution）
- 更改IE浏览器默认的源文件编辑器
- SugarCRM 在Html中增加超连接按钮
- Java线程同步的一些例子
- word文档相关使用
- python实现简单小游戏_python实现简单井字棋小游戏
- python绘制三维图散点图_python matplotlib模块——绘制三维图形、三维数据散点图...
- Android7.1 audio 播放流程(三十五)
- Careercup - Facebook面试题 - 4907555595747328
- Atitit usrQC27模块化的规范模块化法 v4 t77 目录 1. 模块化层级（软件项目 1 1.1. 子项目》命名空间package机制》类》类文件》方法函数级别》语句 1 2. 常见的
- oracle驱动的区别吗,oracle10g下JDBC驱动包的区别
- Chrome谷歌浏览器离线安装包下载
- matlab下载ar人脸库,AR ar人脸数据库，经典的 用于 检测与识别。 Graph Recognize 图形/文字 274万源代码下载- www.pudn.com...
- 视频会议软件Zoom存在安全隐患，我们是否需要停止使用
- DPDK 无锁ring， 详解
- mac宽带连接找不到pppoe服务器,macbookAIR 使用以太网转接头连接宽带… - Apple 社区...
- scratch躲避球
热门文章
- 刘夏真的简历中国科学院计算机所,刘夏_广西医科大学研究生导师信息
- cpan mysql dbd_安装PERL cpan DBD::mysql错误笔记
- VSCode 的扩展包C/C++ IntelliSense, debugging, and code browsing的IntelliSense功能无法使用,远程服务器linux上面的不能用
- 计科实训 餐馆点菜系统
- linux 输入两个命令,Linux两条命令touch、vi
- PS图片中字体或图像的颜色替换
- 立创eda学习笔记一：pcb板基础知识
- 银河麒麟V10 远程桌面
- aardio部署_aardio学习笔记-变量与常量
- APP界面设计规范：如何定义视觉规范