我没关si的情况下强制关机导致的

Source InSight context 窗口丢失的解决办法

(2010-09-03 13:35:45)

转载▼

Run Source Insight, and select Options > Save Configuration. Check to box at the top that says “All settings”. Click the Save button.
Note the directory where the Save dialog box opens.  This is the directory where your configuration file is normally stored. It will probably be in a folder such as “My Documents\Source Insight\Settings”. Just cancel the dialog without saving.
Exit Source Insight.
Go to the folder found in step#2 above, and find the file called GLOBAL.CF3.
Rename GLOBAL.CF3 to something like OLD.CF3
Run Source Insight again.  All options should be back to the defaults.
Select Options > Load Configuration.  Clear the top check box and turn on all the lower checkboxes except for “Display and Windows”.   Press the Load button and select OLD.CF3 to load. This will load all your other settings, except for the positions of the windows.
After loading OLD.CF3 (minus the “windows” settings), your Context Window should be back.  We’re sorry for the inconvenience.

Q：我的context 窗口不见了，而且我找不回来。……翻译的好烂

A：发生这种情况，是应为Source InSight的配置文件损坏了。如果需要解决这个问题，请在没有配置文件的情况下，重新启动Source InSight。

1.Run Source Insight, and select Options > Save Configuration. Check to box at the top that says “All settings”. Click the Save button.
运行Source Insight，在options中选择configuration。选中新窗口顶部的“All settings”，然后点击save按钮。

2.Note the directory where the Save dialog box opens.  This is the directory where your configuration file is normally stored. It will probably be in a folder such as “My Documents\Source Insight\Settings”. Just cancel the dialog without saving.
Exit Source Insight.
记住打开的保存对话框的位置，这个位置就是你通常存放配置文件的地方。比如，My Documents\Source Insight\Settings。然后退出Source Insight。

3.Go to the folder found in step#2 above, and find the file called GLOBAL.CF3.
Rename GLOBAL.CF3 to something like OLD.CF3
进入step#2中的文件夹，里面有一个名为GLOBAL.CF3的文件，把他改名成为OLD.CF3

4.Run Source Insight again.  All options should be back to the defaults.
Select Options > Load Configuration.  Clear the top check box and turn on all the lower checkboxes except for “Display and Windows”.   Press the Load button and select OLD.CF3 to load. This will load all your other settings, except for the positions of the windows.
重启Source Insight。这时候，所有的设置应当便会默认的，选择options中的load configuration.点击load，然后选择OLD.CF3，点击载入。这一步将会载入出去窗口设置以外的所有设置。

5.After loading OLD.CF3 (minus the “windows” settings), your Context Window should be back.  We’re sorry for the inconvenience.
在导入OLD.FC3后，Context Window就会出现。对此我们深表歉意。