错误一:

[root@vi /]# /mnt/cdrom/install

VERITAS Installation Script

Copyright 1993 – 2005 VERITAS Software Corporation, All Rights Reserved.

Installing NetBackup Server Software

NOTE:  To install only NetBackup Client software locally on this machine

or to load additional UNIX client software on this server, insert

the NetBackup UNIX Clients cdrom.

Do you wish to continue? [y,n] (y) y

The NetBackup and Media Manager software is built for use on LINUX hardware.

Do you want to install NetBackup and Media Manager files? [y,n] (y)

NetBackup and Media Manager are normally installed in /usr/openv.

The existing /usr/openv directory will be used for NetBackup and Media Manager.

Reading NetBackup files from /mnt/cdrom/linux/anb

gunzip: /mnt/cdrom/linux/anb/NetBackup.Z: No such file or directory

no data in archive

/mnt/cdrom/linux/catalog/anb/NB.file_trans failed.  Aborting …

File /usr/openv/tmp/install_trace.1984 contains a trace of this install.

That file can be deleted after you are sure the install was successful.

经测试,方法如下:

从光盘拷贝rebuild.bat、gzip.exe、Linux目录到硬盘上,最好放在根目录(目录结构保持不便)

cmd模式执行rebuild.bat 重新打包文件后替换源光盘里的Linux目录即可。

错误二:

The following package(s) are missing and must be

installed before NetBackup can be installed:

VRTSpbx

The missing package(s) are located on the VERITAS

Infrastructure Core Services (ICS) cdrom which is

included in the NetBackup media kit.  From a different

window, unmount/eject the NetBackup cdrom and insert/mount

the ICS cdrom.  When the ICS cdrom has been properly

mounted, files are visible and you are ready to

proceed, enter the path name to the directory where the

installics script is located followed by a to continue.

This script will then install the missing package(s).

OR

Enter q to stop this install and abort.

解决方法如下,安装光盘里ICS目录下的rpm即可.

[root@vi ics]# rpm -ivh VRTSicsco-1.2.3.18-18.i386.rpm

Preparing…                ########################################### [100%]

1:VRTSicsco              ########################################### [100%]

[root@dms ics]# rpm -ivh VRTSpbx-1.2.2.41-1.i386.rpm

Preparing…                ########################################### [100%]

1:VRTSpbx                ########################################### [100%]

错误三:

[root@vi ~]# /etc/rc.d/init.d/netbackup start

tail: cannot open `+2′ for reading: No such file or directory

tail: cannot open `+2′ for reading: No such file or directory

tail: cannot open `+2′ for reading: No such file or directory

tail: cannot open `+2′ for reading: No such file or directory

tail: cannot open `+2′ for reading: No such file or directory

tail: cannot open `+2′ for reading: No such file or directory

tail: cannot open `+2′ for reading: No such file or directory

NetBackup Database Server started.

NetBackup Notification Service started.

NetBackup Enterprise Media Manager started.

NetBackup Resource Broker started.

tail: cannot open `+2′ for reading: No such file or directory

Rebuilding device nodes.

Media Manager daemons started.

NetBackup request daemon started.

NetBackup compatibility daemon started.

NetBackup Job Manager started.

NetBackup Policy Execution Manager started.

NetBackup Service Layer started.

NetBackup is not configured for clustering.

NetBackup Service Monitor started.

解决:

增加cat /root/.bash_profile

export _POSIX2_VERSION=199209

错误四:

Error: failed /usr/openv/java/jre/lib/i386/client/libjvm.so, because libstdc++-libc6.1-1.so.2: cannot open shared object file: No such file or directory

When doing  a Add/Remove software search this is what is installed:

libstdc++-4.1.2-42.el5.i386 - GNU Standard C++ Library

compat-libstdc++-33 - 3.2.3-61.i386 - Compatibility standard C++ libraries

compat-libstdc++-296 - 2.96-l38.i386

解决:

cp /usr/lib/libstdc++-libc6.2-2.so.3 /usr/lib/libstdc++-libc6.1-1.so.2

错误五:

java.lang.UnsatisfiedLinkError: /usr/openv/java/jre/lib/i386/libawt.so: libXp.so.6: ??¨?ò????????ó???: ??????????ò??

at java.lang.ClassLoader$NativeLibrary.load(Native Method)

at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1480)

at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1396)

at java.lang.Runtime.loadLibrary0(Runtime.java:772)

at java.lang.System.loadLibrary(System.java:832)

at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)

at java.security.AccessController.doPrivileged(Native Method)

at java.awt.Toolkit.loadLibraries(Toolkit.java:1397)

at java.awt.Toolkit.(Toolkit.java:1418)

at java.awt.Color.(Color.java:250)

at vrts.common.utilities.SwingUI.(SwingUI.java:26)

at vrts.common.utilities.CommonUIFactory.setUIDefaults(CommonUIFactory.java:61)

at vrts.nbe.JavaPresentationLayer.(JavaPresentationLayer.java:40)

at vrts.nbe.AdminConsole.(AdminConsole.java:27)

at vrts.nbe.AdminConsole.main(AdminConsole.java:40)

解决:

安装

um install xorg-x11-deprecated-libs

Loaded plugins: rhnplugin, security

This system is not registered with RHN.

RHN support will be disabled.

rhel-Cluster                                                                                                 | 1.3 kB     00:00

rhel-ClusterStorage                                                                                          | 1.3 kB     00:00

rhel-rpms                                                                                                    | 1.3 kB     00:00

rhel-VT                                                                                                      | 1.3 kB     00:00

Setting up Install Process

Parsing package install arguments

Resolving Dependencies

--> Running transaction check

---> Package libXp.i386 0:1.0.0-8.1.el5 set to be updated

--> Finished Dependency Resolution

Dependencies Resolved

====================================================================================================================================

Package                     Arch                       Version                               Repository                       Size

====================================================================================================================================

Installing:

libXp                       i386                       1.0.0-8.1.el5                         rhel-rpms                        22 k

Transaction Summary

====================================================================================================================================

Install      1 Package(s)

Update       0 Package(s)

Remove       0 Package(s)

Total download size: 22 k

Is this ok [y/N]: y

Downloading Packages:

Running rpm_check_debug

Running Transaction Test

Finished Transaction Test

Transaction Test Succeeded

Running Transaction

Installing     : libXp                                             [1/1]

Installed: libXp.i386 0:1.0.0-8.1.el5

Complete!

错误六:

其他工作可以正常进行备份,但是打开各个菜单时响应特别慢,查看Media pool时报无法连接Media server错,代码195,无法看到任何一盒磁带。

用service netbackup stop/start 重启netbackup服务,问题依旧。

再次停止netbackup服务,用ps auxf查看,发现有一个进行没有终止:/usr/openv/netbackup/bin/nbsl

解决:

在Symentec建议下用 /usr/openv/netbackup/bin/bp.kill_all 去杀进程失败,于是用kill -9 PID 将其杀掉。再次用

service netbackup start 启动服务,一切正常,可以浏览Media pool。

原因:

/usr/openv/netbackup/bin/nbsl 是netbackup的一个进程间通信服务进程,该进程僵死后导致进程间通信不畅,故出现响应慢、无法连接等问题

错误七:

"A connection to could not be established. Verify

services or daemons are up and running."

解决:

Update file /usr/openv/java/nbj.conf (Settings we used below)

Entries to change

INITIAL_MEMORY=256M

MAX_MEMORY=1024M

FORCE_IPADDR_LOOKUP=0

错误八:

/usr/openv/java/jnbSA &正常起动后需要的相关起动项

Starting the NetBackup Enterprise Media Manager.

Starting the NetBackup Resource Broker.

Populating the database tables.  This will take some time.

**********************************************************************

********************* ALERT - ACTION REQUIRED ************************

**********************************************************************

This installation could fit one of two scenarios.

Follow the instructions that fit your situation.

**********************************************************************

1.  It appears NetBackup is being installed with the intention of

using a different network interface than the default (BJ-C08-IBM3850).

NetBackup daemons will be shut down.  Additional entries must

be added to /usr/openv/netbackup/bp.conf and

/usr/openv/volmgr/vm.conf.  The entry and the file affected

are as follows:

REQUIRED_INTERFACE=ibm3850         (bp.conf)

REQUIRED_INTERFACE=ibm3850         (vm.conf)

DEVICE_HOST=ibm3850                (vm.conf)

After these entries have been added, start the NetBackup and Media

Manager daemons by executing the following command:

/usr/openv/netbackup/bin/goodies/netbackup start

如:

cat /usr/openv/netbackup/bp.conf

SERVER = IBM3850

CLIENT_NAME = IBM3850

EMMSERVER = IBM3850

REQUIRED_INTERFACE=IBM3850

VXDBMS_NB_DATA = /usr/openv/db/data

cat /usr/openv/volmgr/vm.conf

REQUIRED_INTERFACE=ibm3850

DEVICE_HOST=ibm3850

[root@ ~]# /usr/openv/netbackup/bin/goodies/netbackup start

NetBackup Notification Service started.

NetBackup Enterprise Media Manager started.

NetBackup Resource Broker started.

Rebuilding device nodes.

Media Manager daemons started.

NetBackup request daemon started.

NetBackup compatibility daemon started.

NetBackup Job Manager started.

NetBackup Policy Execution Manager started.

NetBackup Service Layer started.

NetBackup is not configured for clustering.

NetBackup Service Monitor started.

**********************************************************************

OR

**********************************************************************

2.  This machine appears to be a member of a cluster.  NetBackup

daemons will be shut down.  Do not install any NetBackup add-on

or database agent products on this machine until after the

NetBackup server has been configured to run in a cluster.  After

NetBackup server installation activities have occurred on all

members of the cluster, execute the following command on the

primary node:

/usr/openv/netbackup/bin/cluster/cluster_config

**********************************************************************

File /usr/openv/tmp/install_trace.23921 contains a trace of this install.

That file can be deleted after you are sure the install was successful.

[root@~]# bpps -a

NB Processes

------------

root     27774     1  0 15:17 ?        00:00:00 /usr/openv/db//bin/NB_dbsrv @/usr/openv/var/global/server.conf @/usr/openv/var/global/databases.conf -hn 8

root     27799     1  0 15:17 ?        00:00:00 /usr/openv/netbackup/bin/nbnos

root     27803     1  0 15:17 ?        00:00:00 /usr/openv/netbackup/bin/nbemm

root     27807     1  0 15:17 ?        00:00:00 /usr/openv/netbackup/bin/nbrb

root     27897     1  0 15:18 pts/2    00:00:00 /usr/openv/netbackup/bin/bprd

root     27902     1  0 15:18 ?        00:00:00 /usr/openv/netbackup/bin/bpcompatd

root     27905     1  0 15:18 pts/2    00:00:00 /usr/openv/netbackup/bin/bpdbm

root     27906 27905  0 15:18 pts/2    00:00:00 /usr/openv/netbackup/bin/bpjobd

root     27908     1  0 15:18 ?        00:00:00 /usr/openv/netbackup/bin/nbjm

root     27914     1  0 15:18 ?        00:00:00 /usr/openv/netbackup/bin/nbpem

root     27924     1  0 15:18 ?        00:00:00 /usr/openv/netbackup/bin/nbsl

root     27932     1  0 15:18 ?        00:00:00 /usr/openv/netbackup/bin/nbsvcmon

root     27945 27908  0 15:18 ?        00:00:00 /usr/openv/netbackup/bin/nbproxy dblib nbjm

root     27973 27914  0 15:18 ?        00:00:00 /usr/openv/netbackup/bin/nbproxy dblib nbpem_email

root     27974 27914  0 15:18 ?        00:00:00 /usr/openv/netbackup/bin/nbproxy dblib nbpem

MM Processes

------------

root     27894     1  0 15:18 pts/2    00:00:00 vmd

[root@~]# bpps -x

NB Processes

------------

root     27774     1  0 15:17 ?        00:00:00 /usr/openv/db//bin/NB_dbsrv @/usr/openv/var/global/server.conf @/usr/openv/var/global/databases.conf -hn 8

root     27799     1  0 15:17 ?        00:00:00 /usr/openv/netbackup/bin/nbnos

root     27803     1  0 15:17 ?        00:00:00 /usr/openv/netbackup/bin/nbemm

root     27807     1  0 15:17 ?        00:00:00 /usr/openv/netbackup/bin/nbrb

root     27897     1  0 15:18 pts/2    00:00:00 /usr/openv/netbackup/bin/bprd

root     27902     1  0 15:18 ?        00:00:00 /usr/openv/netbackup/bin/bpcompatd

root     27905     1  0 15:18 pts/2    00:00:00 /usr/openv/netbackup/bin/bpdbm

root     27906 27905  0 15:18 pts/2    00:00:00 /usr/openv/netbackup/bin/bpjobd

root     27908     1  0 15:18 ?        00:00:00 /usr/openv/netbackup/bin/nbjm

root     27914     1  0 15:18 ?        00:00:00 /usr/openv/netbackup/bin/nbpem

root     27924     1  0 15:18 ?        00:00:00 /usr/openv/netbackup/bin/nbsl

root     27932     1  0 15:18 ?        00:00:00 /usr/openv/netbackup/bin/nbsvcmon

root     27945 27908  0 15:18 ?        00:00:00 /usr/openv/netbackup/bin/nbproxy dblib nbjm

root     27973 27914  0 15:18 ?        00:00:00 /usr/openv/netbackup/bin/nbproxy dblib nbpem_email

root     27974 27914  0 15:18 ?        00:00:00 /usr/openv/netbackup/bin/nbproxy dblib nbpem

MM Processes

------------

root     27894     1  0 15:18 pts/2    00:00:00 vmd

Shared VERITAS Processes

------------------------

root      3546     1  0 12:44 ?        00:00:08 /opt/VRTSpbx/bin/pbx_exchange

错误九:

INF - Server Status = 25

INF - Backup by root on client loclhost:cannot connect on socket.

INF - Backup by root on clinet localhost:the specified client does not exist in an active policy within the configuration database.

解决:

From the client, cd /usr/openv/netbackup/bin and run

bpclntcmd -pn

bpclntcmd -hn media_server_name

bpclntcmd -ip media_server_IP

You should get responses back from each one verifying the master server

and

the media server respectively.

If this doesn't work, you might need to either configure a DNS in this

address

space or add host file entries to resolve the NB server names.

至此/usr/openv/java/jnbSA &就可以起动了

nbu6.5 linux安装,Veritas.Netbackup 6.0 for Linux RedHat AS5.3安装问题相关推荐

  1. Veritas NetBackup 10.0 (Unix, Linux, Windows)

    请访问原文链接:https://sysin.org/blog/veritas-netbackup-10/,查看最新版.原创作品,转载请保留出处. 作者主页:www.sysin.org 一流的企业备份和 ...

  2. RedHat AS5下安装tmail4.6

    最近研究了下Tmail,发现网上还真没有这方面的介绍,参考了likejia 的CentOS5.3 安装PDF,我也写个红帽子的Tmail的安装.方便各位朋友了解下. 本人适用于初学者,高手勿喷.   ...

  3. 服务器系统linux怎么安装教程,CentOS 8.0.1905 linux服务器系统安装与配置图解教程...

    说明: 截止目前CentOS 8.x最新版本为CentOS 8.0.1905,下面介绍CentOS 8.0.1905的具体安装配置过程 服务器相关设置如下: 操作系统:CentOS 8.0.1905 ...

  4. subversion for linux redhat as5的安装

    svn服务器安装 操作系统: Redhat Linux AS5 Apache:2.2.8 Svn:1.4.6 由于apache2已经安装好了,所以在安装svn的时候遇到一些问题,并把记录下来,以备以后 ...

  5. tibco linux安装手册,TIBCO iProcess安装系列在Linux上升级Oracle9.2.0.4到9.2.0.7

    TIBCO iProcess安装系列在Linux上升级Oracle9.2.0.4到9.2.0.7 发布时间:2007-05-28 09:58:14来源:红联作者:Message 安装完Oracle9. ...

  6. peazip 64 linux,Ubuntu 16.04中下载安装PeaZip 6.5.0档案管理器

    PeaZip是一款免费开源的图形化档案管理器和压缩工具,它可以安装在Linux.BSD.Windows操作系统上,目前最新版本是PeaZip 6.5.0.它支持180种以上档案文件格式,包括rar.z ...

  7. redhat enterprise 5 上安装oracle 10.2.0.1

    安装oracle 10.2.0.1 在redhat enterprise linux 5 上安装oracle是一件浪费时间又有一点麻烦的事.装的时候最好参照老外的文章.因为我发现国内大多数人写的这方面 ...

  8. Linux开源IM GGTalk 8.0发布,支持在统信UOS、银河麒麟上运行!

       GGTalk在2021年推出7.0后,经过一年多时间的开发,终于推出8.0版本,实现了Linux客户端.这几年,信创国产化的势头越来越猛,政府事企业单位都在逐步转向使用国产OS.国产CPU.国产 ...

  9. 深度学习工作站环境搭建 ubantu16.04 安装显卡驱动 CUDA8.0 cuDNN6 anaconda tensorflow1.4.0 opencv3.4 含泪总结

    深度学习工作站环境搭建 ubantu16.04 安装显卡驱动 CUDA8.0 cuDNN6 anaconda tensorflow opencv 1 安装ubantu16.04 安装时不要在线更新,在 ...

最新文章

  1. 一个能极大提高生产率的Chrome新建标签页扩展
  2. linux c之<setjmp.h>使用总结
  3. css 块元素、内联元素、内联块元素
  4. 大规模数据生成 (500万条数据)
  5. C#调用matlab,matlab图形Figure嵌入Winform窗体
  6. 如何在 Bios 中更改硬盘模式?
  7. c语言斗兽棋源代码,智能斗兽棋-智能斗兽棋下载-医源世界
  8. 在单个虚拟机中搭建DPDK测试环境
  9. matlab如何在三维曲面上画线,如何在三维曲面上画线
  10. 一台计算机多个显示,一台计算机如何有两个显示器并显示不同的内容?
  11. python五边形的代码_python正五边形代码
  12. 汇编语言--逻辑指令
  13. Java观察者模式事件委托(通过dota和王者荣耀故事讲解)
  14. 【自然语言处理】韩语基础与入门(词汇篇)
  15. 以华泰、国泰君安、平安证券为例:探究券商APP会员体系
  16. 圆形比例分布图怎么做_比例的秘密,教你如何在设计中运用黄金比例
  17. 置顶的搜索框html,HTML实现移动端固定悬浮半透明搜索框
  18. 百度统计---事件跟踪设置
  19. 16条Macbook苹果电脑保养方法手册
  20. 走进人工智能|深度学习 算法的创世纪

热门文章

  1. 记一次更换服务器主板需要设置的参数
  2. ofo小黄车仍在自动续费!如何关闭微信自动扣费?
  3. 点集拓扑学的历史介绍
  4. 大数据编程语言 Scala 进阶篇
  5. Android 全埋点方案盘点
  6. win10服务器系统进不去怎么办,win10开机进不去系统怎么办。
  7. poi导出excel写入公式_【java poi 写入Excel后读取公式值问题】poi导入excel
  8. 如何在Ubuntu中安装搜狗输入法
  9. TCP BBR Startup gain计算总结和Startup失速问题
  10. 虚拟机kali升级最新_kali安装、改变更新源、vmware tools、虚拟机全屏