Elsevier模板(1)
Elsevier 投稿的论文模板cas版
- 模板说明
- 具体代码和生产效果
模板说明
前一段时间跟着老师做科研,老师带我发sci论文,第一次去尝试投Elsevier期刊。我想只要是发学术文章的小伙伴们应该没有不知道Elsevier公司的吧!
Elsevier旗下有很多期刊,这次主要是分享投稿computers & education 方向的模板。
具体代码和生产效果
下面展示一些 内联代码片
。
‘’’
%% Template article for cas-sc documentclass for
%% single column output.
%\documentclass[a4paper,fleqn,longmktitle]{cas-sc}
\documentclass[a4paper,fleqn]{cas-sc}
%\usepackage[numbers]{natbib}
%\usepackage[authoryear]{natbib}
\usepackage[authoryear,longnamesfirst]{natbib}
%%%Author macros
\def\tsc#1{\csdef{#1}{\textsc{\lowercase{#1}}\xspace}}
\tsc{WGM}
\tsc{QE}
\tsc{EP}
\tsc{PMS}
\tsc{BEC}
\tsc{DE}
%%%
\begin{document}
\let\WriteBookmarks\relax
\def\floatpagepagefraction{1}
\def\textpagefraction{.001}
\shorttitle{Leveraging social media news}
\shortauthors{CV Radhakrishnan et~al.}
%\begin{frontmatter}
\title [mode = title]{This is a specimen aba_bab title}
\tnotemark[1,2]
\tnotetext[1]{This document is the results of the research
project funded by the National Science Foundation.}
\tnotetext[2]{The second title footnote which is a longer text matter
to fill through the whole text width and overflow into
another line in the footnotes area of the first page.}
\author[1,3]{CV Radhakrishnan}[type=editor,
auid=000,bioid=1,
prefix=Sir,
role=Researcher,
orcid=0000-0001-7511-2910]
\cormark[1]
\fnmark[1]
\ead{cvr_1@tug.org.in}
\ead[url]{www.cvr.cc, cvr@sayahna.org}
\credit{Conceptualization of this study, Methodology, Software}
\address[1]{Elsevier B.V., Radarweg 29, 1043 NX Amsterdam, The Netherlands}
\author[2,4]{Han Theh Thanh}[style=chinese]
\author[2,3]{CV Rajagopal}[%
role=Co-ordinator,
suffix=Jr,
]
\fnmark[2]
\ead{cvr3@sayahna.org}
\ead[URL]{www.sayahna.org}
\credit{Data curation, Writing - Original draft preparation}
\address[2]{Sayahna Foundation, Jagathy, Trivandrum 695014, India}
\author%
[1,3]
{Rishi T.}
\cormark[2]
\fnmark[1,3]
\ead{rishi@stmdocs.in}
\ead[URL]{www.stmdocs.in}
\address[3]{STM Document Engineering Pvt Ltd., Mepukada,
Malayinkil, Trivandrum 695571, India}
\cortext[cor1]{Corresponding author}
\cortext[cor2]{Principal corresponding author}
\fntext[fn1]{This is the first author footnote. but is common to third
author as well.}
\fntext[fn2]{Another author footnote, this is a very long footnote and
it should be a really long footnote. But this footnote is not yet
sufficiently long enough to make two lines of footnote text.}
\nonumnote{This note has no numbers. In this work we demonstrate aba_bab
the formation Y_1 of a new type of polariton on the interface
between a cuprous oxide slab and a polystyrene micro-sphere placed
on the slab.
}
\begin{abstract}
This template helps you to create a properly formatted \LaTeX\ manuscript.
\noindent\texttt{\textbackslash begin{abstract}} \dots
\texttt{\textbackslash end{abstract}} and
\verb+\begin{keyword}+ \verb+…+ \verb+\end{keyword}+
which
contain the abstract and keywords respectively.
Each keyword shall be separated by a \verb+\sep+ command.
\end{abstract}
\begin{graphicalabstract}
\includegraphics{figs/grabs.pdf}
\end{graphicalabstract}
\begin{highlights}
\item Research highlights item 1
\item Research highlights item 2
\item Research highlights item 3
\end{highlights}
\begin{keywords}
quadrupole exciton \sep polariton \sep \WGM \sep \BEC
\end{keywords}
\maketitle
\section{Introduction}
The Elsevier cas-sc class is based on the
standard article class and supports almost all of the functionality of
that class. In addition, it features commands and options to format the
\begin{itemize} \item document style \item baselineskip \item front
matter \item keywords and MSC codes \item theorems, definitions and
proofs \item lables of enumerations \item citation style and labeling.
\end{itemize}
‘’’
最后的效果如上,有一部分没有截图放出来,主要效果是这样的。因为第一次放代码,不是很熟悉如何放置代码,有需要的小伙伴可以私戳我,我给你发所需要的所有文件。
Elsevier模板(1)相关推荐
- elsevier模板_英文论文双栏模板
初始目的仅是自己想用爱斯维尔(Elsevier)出版商论文的双栏模板,如题图,但下载模板后运行失败,原因是该模板不支持ctex, Miktex,而应该用Texlive.但很多人因为中文支持,初次安装的 ...
- 【LaTeX教程】八.Elsevier模板添加作者简介
欢迎订阅本专栏:<LaTeX教程> 专栏介绍: 博主是一名重度LaTeX使用人员,想借此专栏跟大家分享LaTeX的使用心得,同时为LaTeX初学者们提供一些入门经验.欢迎正在使用或者即将使 ...
- Elsevier期刊模板使用方法总结
我(小橘子)最近准备投稿Elsevier期刊文章,那么在投稿之前会将文章放在对应期刊模板中去修改自己文章的格式,使之符合投稿期刊的要求,目前小橘子已经修改好了,那么小橘子想针对在修改期刊格式过程中遇到 ...
- elsevier LaTeX模板[半成品]
时间紧,快要翻译不完了,顾不上排版了,转战word了 算半个elsevier模板吧 \documentclass[UTF8,a4paper,fleqn]{ctexart} \usepackage{am ...
- Elsevier(爱思唯尔)LaTex 模板详细说明
Elsevier 模板的使用 官方指南:Latex Instructions 通用 Elsevier 模板下载地址:elsarticle-template.zip [ 如果不了解文档类的作用,可以参考 ...
- 爱思唯尔(Elsevier)期刊模板elsarticle的使用
elsevier模板下载:https://www.elsevier.com/authors/author-schemas/latex-instructions 可以使用overleaf在线编辑: 打开 ...
- latex参考文献顺序不对_latex模板中,引用多篇参考文献,连续引用压缩问题
1.如何使连续的参考文献能够中间用破折号连起来?比如[6,7,8,9]变成[6-9]? 方法:在文档开始前加上下面的语句命令 \usepackage[numbers,sort&compress ...
- LaTeX编写Elsevier论文格式-小白记录
LaTeX编写Elsevier论文格式 一.准备工作 1. windows安装TeX Live 2. 安装TeX Studio 3. Elsevier模板下载 二.编写 1. word版本内容迁移到L ...
- Elsevier论文草稿在排版时如何添加行号?(单栏排版,双栏排版)
Elsevier模板撰写的latex草稿lmanuscript, 通常可以通过添加行号以方便审稿人审阅投稿论文, 下面给大家介绍两种行号编排的方法:单栏排版行号添加,双栏排版行号添加 1. 如果论文 ...
最新文章
- 大中型企业的天网:Apache Geode
- PHP 开发环境和组织管理
- oracle+数据到+mysql数据库乱码问题_Linux系统Oracle数据库乱码问题的解决方法
- 线程池:ThreadPoolExecutor
- clion远程调试linux内核,Clion + 树莓派/Ubuntu 远程调试
- python计算两张图像的L1和L2损失
- java中PrepareStatement使用的一点小问题
- 视达配色教程1 色彩是什么
- VS2008 安装时 出现 “加载安装组件时出现问题,取消安装” 的解决方法
- 硕士期间两篇计算机sci二区,我院青年教师陈新华今年连续两篇论文在中科院二区SCI期刊见刊...
- Win10怎么添加开机启动项?Win10添加开机自动运行软件三种方法
- idea提示红色但是代码没有错误,编译通过
- 码洞原创深度技术文章大全 —— 高端面试必备
- Cocos Creator 随笔(1)-- 世界坐标,相对坐标转换问题
- find与ls命令合体坑总结
- jQuery unload事件
- 英飞凌TRAVEO II介绍
- Altium软件以及库相关资源获取
- Linux 安装git、配置git账号
- 饿了么CFO徐舸被架空:阿里派人直接出任 协助王磊
热门文章
- java循环购物车结算系统,购物车js代码_JS实现购物车商品列表结算功能代码
- iPhone 电池的正确激活与使用方式
- 最近用周立功的IOT3960板子做一个小控制器,现在到了界面美化阶段,各位大侠有没有高招?
- 小程序云开发实现微信支付,不需要搭建服务器
- 二分查找(存在重复找到第一个的位置)
- HackerRank问题:Gary hiker valleys
- 帆软初级证书 第三部分 FineBI 答案
- Linux sudo命令报错:用户不在sudoers文件中
- STM32 使用 ITM 输出调试信息
- 如何在2周内交付85%以上需求?阿里工程师这么做