连接远程队列

java代码 MQAPI  openOptions 一定不要放这个属性 MQConstants.MQOO_INPUT_AS_Q_DEF

在此之前关闭认证 执行ALTER QMGR CONNAUTH(' ') REFRESH SECURITY TYPE(CONNAUTH)

02/19/2023 02:29:00 AM - Process(53875.28) User(mqm) Program(amqrmppa)Host(basenode) Installation(Installation1)VRMF(8.0.0.9) QMgr(QM_A)AMQ9208: Error on receive from host 192.168.159.1.EXPLANATION:
An error occurred receiving data from 192.168.159.1 over TCP/IP. This may be
due to a communications failure.
ACTION:
The return code from the TCP/IP read() call was 104 (X'68'). Record these
values and tell the systems administrator.
----- amqccita.c : 4117 -------------------------------------------------------
02/19/2023 02:29:00 AM - Process(53875.28) User(mqm) Program(amqrmppa)Host(basenode) Installation(Installation1)VRMF(8.0.0.9) QMgr(QM_A)AMQ9999: Channel 'ACLIENT' to host '192.168.159.1' ended abnormally.EXPLANATION:
The channel program running under process ID 53875 for channel 'ACLIENT' ended
abnormally. The host name is '192.168.159.1'; in some cases the host name
cannot be determined and so is shown as '????'.
ACTION:
Look at previous error messages for the channel program in the error logs to
determine the cause of the failure. Note that this message can be excluded
completely or suppressed by tuning the "ExcludeMessage" or "SuppressMessage"
attributes under the "QMErrorLog" stanza in qm.ini. Further information can be
found in the System Administration Guide.
----- amqrmrsa.c : 930 --------------------------------------------------------

AMQ9208: Error on receive from host，AMQ9999: Channel ‘ACLIENT‘ to host ‘192.168.159.1‘ ended abnorma相关推荐

S3C2440 WINCE6将USB DEVICE改成USB HOST，实现两个USB HOST
S3C2440一般默认的是一个USB DEVICE,一个USB HOST,即一个主口,一个从口,先来看看USB Device与USB Host相关知识. USB Host: 最底层就是USB Host ...
【Bug解决】curl: (7) Failed connect to 192.168.159.133:8888； No route to host
问题场景: 我出现这个问题是在docker拉取tomcat镜像,启动后访问连接失败. 这个问题弄了几天都没有解决,很多方法都试过: 换tomcat的版本.关防护墙.开放端口,头发一把把掉(菜鸟哭泣~~ ...
ssh: connect to host 192.168.1.20 port 22: No route to host解决方案
ping 192.168.1.20 | ping 192.168.1.21 | ping 192.168.1.22 不通解释:在一台服务器上ip为(192.168.1.31):部署三台虚拟机(192 ...
无线调试和unable to connect to 192.168.2.245:5555由于目标计算机积极拒绝，无法连接。 (10061)
去年调试设备使用了无线调试,主要是设备也没有usb线,想要有线调试也不行,就去找了相应的博客来看了看,前段时间有人问了我一些这方面的问题,这里记录一下命令,希望能帮助到有需要的人.一般来说只需要以 ...
cannot connect to 192.168.137.137:5555: 由于目标计算机积极拒绝，无法连接。
1.问题手机重启后,电脑输入 adb connect 192.168.137.137:5555 结果发生了问题,如下: cannot connect to 192.168.137.137:5555: ...
计算机网络-将C网192.168.25.0划分四个子网，计算每个子网的有效IP地址范围和对应网络掩码
首先计算子网掩码: 将256/4=64,主机块大小64 2的6次方=64 根据主机数量计算出掩码的最后一个字节为11000000,用十进制表示掩码为255.255.255.192 由于IP地址结尾全为 ...
计算机网络-将C网192.168.25.0划分四个子网，计算每个子网的有效IP地址范围和对应网络掩码...
首先计算子网掩码: 将256/4=64,主机块大小64 2的6次方=64 根据主机数量计算出掩码的最后一个字节为11000000,用十进制表示掩码为255.255.255.192 由于IP地址结尾全为 ...
linux启动mysql失败，Fatal error: Can‘t open and lock privilege tables: Table ‘mysql.host‘ doesn‘t exist
问题描述启动mysql服务失败,前往/var/lib/mysql/文件夹下的错误日志中报出一下错误 Fatal error: Can't open and lock privilege tables ...
Fatal error: Can't open and lock privilege tables: Table 'mysql.host' doesn't exist的
安装完Mysql5.5.24时,用mysql.server启动的时候,出现 Fatal error: Can't open and lock privilege tables: Table 'mysq ...

AMQ9208: Error on receive from host，AMQ9999: Channel ‘ACLIENT‘ to host ‘192.168.159.1‘ ended abnorma

连接远程队列

AMQ9208: Error on receive from host，AMQ9999: Channel ‘ACLIENT‘ to host ‘192.168.159.1‘ ended abnorma相关推荐

最新文章

热门文章