每次打开工程的时候，都会报如下错误

Warning #440: Requested device ‘STM32F407ZE’ is substituted with variant ‘STM32F407ZETx’ for target ‘N100_App’

可按照图示方式，先选择 2号芯片保存；再选择 1号实际使用的芯片保存一次，重新打开工程就可以了
如果重新打开工程，报了很多错误，不要慌；重新选择一次实际使用的芯片信号，再编辑一次就可以了；

如果是报了多个 #404 错误

那就说明该软件下面创建了多个工程可按照上图所示方式，把不要的工程给删除掉就可以了

Warning #440: Requested device相关推荐

当使用tensorflow时出现“the requested device apperas to be a GPU, but CUDA is not enabled”的解决办法
解决方法: 安装 GPU版本的 tensorflow, tensorflow-gpu 安装方法: pip install tensorflow-gpu==1.14.0 出错过程及细节在一个新服务器上 ...
STLINK : Warning: Connection to device 0x413 is lost
笔记在写板子的MCU板固件程序, MCU是STM32F407IGT6. 最开始,用的JLINK调试程序. 逻辑写了一部分,发现带着JLINK跑的时候,一切正常.将JLINK摘下来时,程序就不正常了. ...
[WARNING] The requested profile “pom.xml“ could not be activated because it does not exist.
1.错误描述:在执行maven clean的时候有时会出现 The requested profile "pom.xml" could not be activated becau ...
[WARNING] The requested profile pom.xml could not be activated because it does not exist.
一.前言前两天用eclipse建了一个spring boot项目,建完直接clean-install来着,结果第一步clean就给我报了一个这么个错. 二.解决一开始我以为是maven仓库依赖方面 ...
[WARNING] The requested profile pom.xml could not be activated because it does not exist.解决方法
Driver for device rausb0 has been compiled with version 22
在使用iwconfig命令的时候提示的一个警告: # iwconfig lo no wireless extensions. eth0 no wireless extensio ...
Kubernetes的Device Plugin机制源码解析
简介: Kubernetes 1.8 引入的Device Plugin机制,通过扩展的方式实现支持GPU.FPGA.高性能 NIC.InfiniBand等各种设备的集成.而Device Manager ...
train_image_classifier.py：Cannot assign a device for operation CifarNet/conv1/Conv2D: node CifarNet
出错内容如下: Errors may have originated from an input operation. Input Source operations connected to nod ...
【33】警告Monitor thread (device: 1844301081AEE00F00 [2.4]) - ping was missed, closing the device connec
报错提示: 连接oak d poe,中途会出现设备丢失[warning] Monitor thread (device: 1844301081AEE00F00 [2.4]) - ping was mi ...

Warning #440: Requested device

Warning #440: Requested device

每次打开工程的时候，都会报如下错误

如果是报了多个 #404 错误

Warning #440: Requested device相关推荐

最新文章

热门文章