1. Chapter Overview

In this module, we take you through the basics of deploying and managing applications in Cloud Foundry:

• Source paths are mechanism for specifying the location of application content when pushing applications.
• Manifests provide declarative configuration for an application. This section discusses how to make a manifest, and why they’re a good approach when combined with version control.
• Buildpacks are used to containerize applications. In this section, we briefly look at how buildpacks work in Cloud Foundry.
• Examine the method for passing environment variables to applications.
• Metadata allows you to provide additional information to resources with labels and annotations.
• Apps can be scaled both horizontally and vertically in Cloud Foundry. This section describes the procedure for both.
• Log output contains lots of useful information about an application,and is essential for troubleshooting.
• Cloud Foundry is ensuring the correct number of app instances are running. This section demonstrates one of the resiliency features built into the platform.
• Quotas are named sets of memory, service, and instance usage limits that apply to an org or space. As a Cloud Foundry developer, it’s important to understand what quotas are applied to the space you’re working in.
• Application security groups can be used to restrict egress from both staging and running apps.

2. Source Paths: Overview

Source paths let you specify a path to the application when running cf push. It is important to understand what you are pushing to Cloud Foundry.

2.1 Using the Current Directory

When you cf push without specifying a path, the contents of the current directory you ran the push command from are pushed up. This is what we did in the first-push exercise. However, you should be careful with this, as it can result in unexpected behavior when you are not in the directory you expect. Therefore, it is always safer to explicitly specify a path.

2.2 Specifying a Path

You can use the --path (or -p) flag to give the location of the directory containing the application content. The path can also point to a specific application artifact like a .jar or .zip file.

You can also specify the path in the manifest file:

---...path: /path/to/app/bits

A quick word on manifests vs the CLI: Broadly, you can think of the CLI commands you run against an app as experimental. Any declarations made via the CLI can, and should be, reflected in the manifest if you’d like them to persist. Manifests live in version control and are shared among developers in a way that CLI commands cannot. Throughout the course, we will use a combination of CLI commands and manifests.

If you declare the -p parameter, this will take precedence over a path declared in the manifest.

If you push without specifying a path in the manifest or a -p parameter, the CLI will push the contents of your current working directory (we did this when we pushed our first-push app earlier in the course). It’s a bad idea to get into this habit, as unexpected things can happen (like accidentally pushing a folder of your home movies). Therefore, you should always specify a source path.

2.3 Specifying a ZIP File

Cloud Foundry supports pushing .zip files containing your app code. An app packaged as a .zip file exists in the zip-file directory of the course materials. Let’s push it, being sure to specify the path to the .zip file.

This app doesn’t have a manifest with it, so we’ll need to specify some parameters via the CLI.

cf push zip-with-src-path -p app.zip -b staticfile_buildpack -m 32M -k 64M --random-route

If you access the app in a browser, you should see the Cloud Foundry logo.

While specifying a path is best practice for all app deployments, when pushing .zip files, it is mandatory. If you don’t pass a path to a .zip file, Cloud Foundry won’t unzip the file before deploying it. The implications of this vary depending on the buildpack you’re using. Our goal is to avoid any unexpected behavior.

Let’s test this out ourselves with the staticfile buildpack and see what happens. Be sure you are in the zip-file directory before pushing.

cf push zip-no-src-path -b staticfile_buildpack -m 32M -k 64M --random-route

If you access this app in a browser, you should see a 403 error. If you access the app’s URL and append it with /app.zip, the app package will be downloaded to your local machine. When we omitted the path, Cloud Foundry didn’t unzip the files. The staticfile buildpack assumed you wanted to pass the entire directory contents during staging, even though it only contains a single file.

Again, make sure you always provide a path when pushing.

2.4 Tidy Up

Before we move on, let’s clean up a little. Delete the zip-no-src-path app, as we won’t need it anymore.

cf delete -r zip-no-src-path

Rather than deleting the zip-with-src-path app, let’s rename it to something more sensible, so that we can use it in later sections:

cf rename zip-with-src-path static-app

3. Manifests Overview

Manifests have been mentioned a handful of times already in this course. In the Source Paths section, the static-app was deployed and configured entirely via command-line arguments. And while this worked fine for our first deployment, if we wanted to deploy it again in another space or share the configuration with a colleague, we’d need to recall the CLI arguments we used. Sharing CLI commands isn’t a very reliable way to deploy our app, especially if something changes in our configuration.

Instead, we use a manifest file to specify values for all configurable parameters. Using a manifest file is a good practice because it can be kept in version control. A version-controlled manifest is consistent and can be shared between developers. It also allows manifest updates to be rolled out to multiple deployments quickly and efficiently, especially when integrated as part of a CI/CD pipeline.

3.1 Creating Manifests via the CLI

You can write a manifest from scratch manually by following the Cloud Foundry documentation. But that requires a fair amount of YAML wrangling. Instead, Cloud Foundry can create a manifest for you based on the current state of a deployed application. Use the CLI to generate a manifest for the static-app:

cf create-app-manifest static-app

The CLI will generate a manifest file in your current directory.

Note: the name of the file is static-app_manifest.yml, not manifest.yml, as it’s named after the app. To use this manifest on a push, you need to supply the -f flag and the path to the manifest (or rename the file to manifest.yml, which is the default that the CLI will look for in the current directory).

Looking at the app manifest, you’ll notice it includes the stack property. You didn’t specify this when you pushed the app, so Cloud Foundry used its default value.

3.2 Testing the Manifest

Let’s test our new manifest. Start by deleting the static-app, then re-pushing it with the manifest.

cf delete -f -r static-app
cf push -f static-app_manifest.yml

Try running cf delete --help to see what the flags in the command above do.

If you used the exact commands above, the app will not deploy correctly. When you open the app route in a browser, you will see a 403 error. This is the same error you saw in the Source Paths section. Open the manifest and see if you can figure out what’s wrong.

Cloud Foundry can only include the config elements in the generated manifest that it knows about. The path to the app.zip file is missing from the generated manifest. Cloud Foundry doesn’t know the path you used on your local filesystem. Fix this by adding the path to the manifest, or by pushing with the -p parameter. How you choose to fix this will depend on your use case. For now, let’s push with the -p parameter:

cf push -f static-app_manifest.yml -p app.zip

The app should now correctly display the Cloud Foundry logo again.

3.3 CLI vs Manifest Precedence

When working with manifests, you can override their values on the command line. You can test this out by re-pushing, but specifying a different disk allocation.

cf push -f static-app_manifest.yml -p app.zip -k 128M

If you want to make this change permanent, you should add it to the manifest. Otherwise, the next time you push the manifest without the -k 128M parameter, the current value is overridden.

This reiterates the point made earlier in this section; passing parameters to the CLI is good for experimenting, but permanent changes should be reflected in a manifest that lives in version control.

You can also explicitly ignore the manifest when pushing using the --no-manifest flag.

3.4 Variables in Manifests

Manifests support the parameterization of values. For example, you likely want to use a different route for the development version of your app than for the production version. You could parameterize the route value and have it set on push. This allows you to use the same manifest for dev and production.

Variables are declared inside double parenthesis: i.e. ((my-variable)). To demonstrate, let’s parameterize the number of instances in our manifest by editing the file:

---
applications:
- name: training-appinstances: ((instances))memory: 64Mbuildpacks:- go_buildpack

We can then push with:

cf push -f static-app_manifest.yml -p app.zip --var instances=1

While this looks similar to cf push -i 1, variables are required to be passed in during push.

It is good practice to define a vars file for each environment (development, staging, prod, etc) rather than relying on variables on the command line. In this way, we would be declaring (in files in source control) all of the deployment configuration for each environment. We could therefore define a file static-app_dev.yml:

instances: 1

And then push with:

cf push -f static-app_manifest.yml -p app.zip --vars-file=static-app_dev.yml

4. Buildpack Basics: Overview

Before we continue, let’s briefly discuss this “buildpack” thing we have referenced a few times. Buildpacks are responsible for containerizing your application. Essentially, they provide the runtime environment your application needs. The Python buildpack knows how to construct runtimes for Python apps, the Java buildpack for Java, and Go buildpack for Go-lang, etc. The staticfile buildpack we have used so far uses nginx to serve static content.

Buildpacks construct runtimes during the “staging” phase of an application (more on this later).

4.1 Available Buildpacks

So far, we’ve been using the staticfile_buildpack in our push commands. But there are many others.

To view the available buildpacks in your Cloud Foundry instance run:

cf buildpacks

The listed buildpacks are configured by your Cloud Foundry operator. These available buildpacks are referred to as “system” buildpacks, as they are available in the system for all users.

4.2 Git Buildpacks

In addition to the system buildpacks, many Cloud Foundry instances allow you to specify the URL of a specific version of a buildpack in a git repository. In this case, Cloud Foundry will download the specific version of the buildpack and use it to stage the application.

Note the use of git buildpacks can be disabled by Cloud Foundry administrators.

If enabled, you could deploy the training-app using a specific version of a git buildpack with:

cf push -b htt‌ps://github.com/cloudfoundry/staticfile-buildpack.git#v1.5.21

Of course, you would want to add this value to your manifest if you planned to use it. We’ll look more at buildpacks later in this course.

5. Environment Variables: Overview

Environment variables inject configuration values into applications. As the 12-factor app principles state, we should “store config in the environment”. In this section, we’ll test out passing environment variables to a training-app.

5.1 Preparation

The golang application used in this section will display some basic information about the app itself, including its environment variables.

Firstly, let’s deploy the training-app using the supplied manifest. The application and manifest are in the training-app directory in the course resources:

cf push training-app -f manifest.yml -p training-app.zip --random-route

Access the app in a browser and make sure you see can see the interface. You will notice that at this point the application UI is not displaying any environment variables.

5.2 Setting Environment Variables

This app will display any environment variable that starts with TRAINING_. Set some environment variables (but don’t restart or restage yet):

cf set-env training-app TRAINING_KEY_1 training-value-1
cf set-env training-app TRAINING_KEY_2 training-value-2
cf set-env training-app TRAINING_KEY_3 training-value-3

Notice the CLI provides a tip: TIP: Use ‘cf restage training-app’ to ensure your env variable changes take effect. If you access your app in a browser before restarting/restaging, you will see why; the app does not see the new environment variables yet.

Now restart the app and view it in a browser (we will discuss restart versus restage in a later section). You should see the three environment variables you set above.

cf restart training-app

5.3 Inspecting Environment Variables

Most apps do not (and should not) show environment variables in their publicly accessible UI. However, you can use cf env to inspect their environment variables and values.

cf env training-app

Be sure you have restaged or restarted your app so that the app sees the same values you see when using cf env.

Before you restage or restart after changing environment variables, cf env will show the latest values, while the app will only see and display the older values in its UI.

5.4 Updating Environment Variables

You can change an environment variable value by using cf set-env and providing a new value:

cf set-env training-app TRAINING_KEY_3 training-value-3_1

Remember to restart the app to see the change.

5.5 Adding Environment Variables to the Manifest

To ensure the environment variables are configured correctly on every push, be sure to add them to the manifest. If you take a look at the training-app manifest, you’ll see that the app already has one environment variable set called GOPACKAGENAME.

Update your local copy of the manifest to include the three TRAINING_KEY_* values previously set manually via cf set-env.

Delete the existing training-app and re-deploy using the updated manifest, and check that the environment variables are correct.

NOTE: You should avoid putting secrets directly in the manifest. Instead, use variables in the manifest and store secrets outside of
source control.

5.6 Unsetting Environment Variables

To remove an environment variable, you use cf unset-env. Because you can set variables via the CLI or a manifest, simply removing a value from a manifest and re-pushing will not work. You must unset the value via the CLI and remove it from the manifest.

cf unset-env training-app TRAINING_KEY_1

5.7 Platform Environment Variables

When you read the environment variables for an app with cf env, you will have noticed that there were more than the user-provided values you set. Cloud Foundry also injects configuration for your application via environment variables. Two common variables are VCAP_APPLICATION, which provides configuration and information about the application instance, and VCAP_SERVICES, which provides configuration for accessing service instances. Applications can decide to use these environment variables if necessary (the sample application is reading and displaying some of these values). A complete list of platform environment variables is provided in the Cloud Foundry documentation.

5.8 Environment Variable Groups

Environment variable groups are system-wide variables that Cloud Foundry operators can apply to all running apps and all staging apps. Environment variable groups are typically used to provide generally applicable, albeit optional, configuration values for a specific Cloud Foundry instance. Each group consists of a single hash of case-sensitive name-value pairs that are inserted into an app container at either runtime or staging. These values can contain information such as HTTP proxy information.

When creating environment variable groups, only the CF operator can set the value for each group, but authenticated users can view the environment variables assigned to their app. In the event you set an environment variable of the same name, the user-defined value(s) you provide will take precedence over environment variables provided by these groups. So they can effectively be overwritten on an app-by-app basis.

Platform operators configure environmental variable groups. As a developer, you will not be configuring these values. However, you can view any existing environment variable groups with the following commands:

cf running-environment-variable-groupcf staging-environment-variable-group

These commands will retrieve the contents of any running and staging variable groups.

修改环境变量

6. Metadata: Overview

Cloud Foundry provides the ability to add metadata to resources such as spaces and apps. This metadata provides additional information about the resources in your Cloud Foundry deployment. This can be a useful tool when operating, monitoring, and auditing Cloud Foundry.

There are two types of metadata: labels and annotations.

6.1 Labels

Labels are key-value pairs that allow you to identify and select Cloud Foundry resources. Labels are searchable. For example, if you have labeled all apps running in development, or all spaces containing internet-facing apps, you can then find those apps by searching for their labels.

Labels can be set via the CLI. Let’s add some labels to our training-app:

cf set-label app training-app env=dev

We should be able to see that our labels have been set correctly in the app details:

cf labels app training-app

Now we can use labels as a search function to list all of the apps with the key/value env=dev:

cf apps --labels 'env=dev'

Multiple labels can be used to filter search results. Let’s add another:

cf set-label app training-app sensitive=true

Now we can search for both labels using a comma-separated list:

cf apps --labels 'env=dev,sensitive=true'

The only app shown in the output should be the training-app.

Like always, labels should be added to the app manifest.

metadata:labels:sensitive: true

6.2 Annotations

Annotations allow you to add non-identifying metadata to CF resources. Unlike labels, you can’t query based on annotations, and there are fewer restrictions than for key-value pairs. For example, you could include information about how the resource was deployed (via CI or non-CI), or tool information for debugging purposes.

Annotations cannot be added using a regular CLI command. Instead you’ll need to add them via the app manifest. In an app manifest, annotations are included in the metadata block:

metadata:annotations:contact: "bob@example.com"labels:env: dev

7. scale

7.1 Horizontal Scaling

When you scale an application horizontally, you manipulate the number of instances of that application up or down, usually in response to an increased or reduced user load.

In Cloud Foundry, horizontal scaling doesn’t result in downtime as traffic is only routed to available instances. When new instances are created, traffic isn’t routed to those instances until they pass a healthcheck (we’ll cover healthchecks later in this course).

Let’s start by scaling the training-app up to two instances:

cf scale -i 2 training-app

You can see the instances have been scaled successfully by running cf app training-app and observing instances: 2/2 in the output.

7.2 Vertical Scaling

When you scale an application vertically, you are manipulating the resources allocated for each application instance container. In Cloud Foundry, you can change memory and disk allocations.

Let’s scale the training-app instances down in both disk and memory.

cf scale -m 48M -k 256M training-app

What happened? Scaling vertically involves downtime as the containers are recreated with different resource allocations. This is an important point to consider when scaling vertically in production. Therefore, you should strive to right-size your resource allocations per instance during development and rely on horizontal scaling in production.

You can view the allocations for an app by running cf app <app-name>.

As always, if you’d like to make any scaling changes permanent, these values should be updated in a version-controlled app manifest. For example:

---
applications:
- name: training-appmemory: 48Mdisk-quota: 256Minstances: 2

7.3 A Quick Word on the App Autoscaler

The scaling techniques described on the previous pages are manual; they must be performed by a human to take effect. The App Autoscaler is an optional component that may be available in the Cloud Foundry instance you are using. This is a Cloud Foundry extension project, implemented as a marketplace service, and automatically scales apps based on performance metrics or a schedule.

Here are a few examples:

• Automatically scale down the number of app instances over the weekend and back up Monday morning.
• Automatically scale up the number of instances when CPU usage exceeds a custom threshold and back down when it drops below a threshold.

The App Autoscaler is outside the scope of this course, but you can learn more online.

8. Logs: Overview

As a developer, you will frequently access application logs to debug your apps. Cloud Foundry uses a component called ‘Loggregator’ for streaming log output from applications and Cloud Foundry system components (in this course, we’ll focus on application logs). Logs are incredibly helpful when troubleshooting. Common issues you might see are apps running out of memory, route collisions, or pushing the wrong application payload.

8.1 Following Logs in Real-Time

The CLI can stream new logs to your terminal:

cf logs training-app

You won’t see any output until you access the training-app. Open the training-app URL and hit refresh a few times. Now that you’ve generated some traffic, log output should appear. You should see logs from the Cloud Foundry routers tagged with [RTR/<some-index>].

You can exit streaming with CTRL-C, or you can continue to stream and start a new terminal window.

Note: The log streaming functionality uses a websocket to stream logs in near real-time. If you cannot stream logs while on a corporate network, you should check with the network administrators to ensure websockets are allowed。

8.2 Inspecting Recent Logs

You can also pass the --recent parameter to view only the recent logs for an app. This is useful if your application is producing a large volume of logs:

cf logs --recent training-app

The --recent buffer is finite in both space and time. If your app has been idle for a long period, you may not see anything in the recent logs.

8.3 Log Drains

As mentioned at the start of this section, by default the Loggregator streams logs to your terminal. Logs can be drained to a third-party log management service via syslog forwarding if you need to persist or analyze logs.

Optional information on log drains is available online.

8.4 Events

There are two main types of Cloud Foundry events: audit events and usage events. Audit events are largely used to monitor actions taken against resources, such as app restarts, stops, scaling, route mapping, and many more.

You can view the most recent events of an app with

cf events app-name

Alongside each event you should be able to see the user that executed that particular event.

Optional information on events is available here: https://docs.cloudfoundry.org/running/managing-cf/audit-events.html.

Container Metrics

Metrics for Cloud Foundry application containers can be made available for viewing via CLI plugins (more on these later). While container metrics are outside the scope of this course, it is useful to know of their existence. Optional information on metrics is available here: https://docs.cloudfoundry.org/loggregator/container-metrics.html.

9. Resiliency: Overview

By performing cf scale, you asked Cloud Foundry to ensure you have two instances of the app running. Behind the scenes, Cloud Foundry is ensuring this is so. Let’s test it.

To see this happen, we can watch the logs. In a terminal window, tail the logs:

cf logs training-app

9.1 Killing an App Instance

The application has a /kill endpoint that will crash the instance programmatically.

WARNING: Don’t build apps with a /kill endpoint! This is for training purposes only.

Go to your application in a browser. Tack on /kill to the URL and hit Enter. You will see a ‘502 Bad Gateway’ error as you will have killed this instance. Quickly switch back to the terminal window where you are tailing the logs. You should see that Cloud Foundry (very quickly) detects an instance is missing and creates a new one.

If you go back to your browser, remove the /kill from the URL, you should be able to refresh and see that you are only being routed to the live instance. Once the new instance starts up, Cloud Foundry once again load balances across the healthy instances.

When you are ready, you can stop tailing the logs by hitting CTRL-C in the terminal window.

9.2 Pretty Cool. So What Happened?

Cloud Foundry is constantly monitoring the actual count of the running application instances and comparing that number to the desired count. If it finds an issue, Cloud Foundry will correct it (in our case, by creating a new instance). And just like during scaling, when the new instance becomes available, Cloud Foundry routes traffic to it. Cloud Foundry knows an instance unhealthy if it fails a health check. We discuss health checks later in the course.

And what didn’t happen?
A lot. All apps get this level of care from Cloud Foundry. You don’t have to do anything other than use Cloud Foundry.

10. Quotas: Review

Quotas are named sets of memory, service, and instance usage limits. They can be applied at the org level or the space level. Org quotas are mandatory, while space quotas are optional. Org-level quotas are shared across all spaces in that org.

Typically, Cloud Foundry operators will establish quotas for orgs, and OrgManagers will establish quotas for spaces. So while it’s not crucial that developers know how to manage quotas, it is important you understand how to view the quotas for your orgs and spaces. After all, resource planning is a collaborative effort.

10.1 Org Quotas

Let’s take a look at what quota is on your current org:

cf org <org-name>

Once you’ve retrieved the quota, you can view its details:

cf org-quota <quota-name>

The output should show the resource limits on your org.

10.2 Space Quotas

As mentioned previously, quotas can be scoped at both the org and space level. Like org quotas, we can check what quota is applied on a space, by running

cf space <space-name>

If a space doesn’t have an associated quota, then this value will be empty in the cf space output. If you have a space quota set, then do

cf space-quota <quota-name>

to see the details of that quota.

11. Application Security Groups: Overview

Application Security Groups (ASGs) are a collection of egress rules that list protocols, ports, and IP address ranges where an app or task is allowed to connect to (where your app can reach out to). ASGs define ‘allow’ rules. When ASGs are applied to the same space or deployment, their order of evaluation is unimportant; ASG’s are additive.

ASGs can only be created or updated by admins. However, as ASGs dictate the outbound connectivity allowed, it is important to understand them as a developer.

Whenever application security groups are added, updated, or removed, you must restart your app for the changes to take effect.

11.1 Staging and Running ASGs

Security groups can be applied globally - to all orgs and spaces - by assigning them to either the staging or running ASG set. ASGs in the staging set determine the egress allowed during app staging, while those in the running set do so for app and task runtime.

When apps and tasks begin staging, they need traffic rules permissive enough to allow them to pull dependencies from the network. A running app or task is likely to have fewer needs of this sort, so ASGs applied during staging are often more permissive than those applied during the running lifecycle.

To view the ASGs for staging:

cf staging-security-groups

And for running ASGs:

cf running-security-groups

Once you’ve retrieved the name of the ASG you want to inspect, you can view the details of those rules:

cf security-group <security-group-name>

This will output a JSON object like so:

[{"protocol": "tcp","destination": "0.0.0.0/0","ports": "53"},{"protocol": "udp","destination": "0.0.0.0/0","ports": "53"}
]

The above example is one of the two ASGs preconfigured in open-source installations of Cloud Foundry (commercial distributions may have different defaults). The ASG, named dns, permits egress on port 53 over TCP and UDP to any IP address.

The other default ASG, public_networks, has the effect of blocking outbound traffic to the following private IP address ranges by omitting them from the ranges that it does permit:

10.0.0.0 - 10.255.255.255
169.254.0.0 - 169.254.255.255
172.16.0.0 - 172.31.255.255
192.168.0.0 - 192.168.255.255

Of course, egress to these IP address ranges will be permitted if another ASG is created allowing egress to them.

11.2 Space-scoped ASGs

It is also possible for admins to bind ASGs to a specific space. In such cases, the space-specific ASGs are combined with the platform ASGs to determine the rules for that space.

You will still need an admin to create ASGs that you want to apply to a particular space, but, once created, a Space Manager can bind the ASG to their space with the following command:

cf bind-security-group <SECURITY-GROUP> <ORG> --space <SPACE>

By default, this will apply the ASG as a running security group in the space. To instead set it as a staging security group use the --lifecycle flag.

Cloud Foundry 3. cf 命令相关推荐

1. Cloud Foundry 命令总结

   参考一: 1 安装cloudfoundry cli 客户端 2  带密码等录  cf login --skip-ssl-validation -a https://api.yourcompany.co ...

2. 使用Spring-Cloud将Spring Boot应用程序部署到Cloud Foundry

   我有一个基于Spring Boot的小型应用程序 ,该应用程序使用Postgres数据库作为数据存储. 我想记录将示例应用程序部署到Cloud Foundry的步骤 . Spring Boot参考指南 ...

3. Cloud Foundry 快速入门 (cf工具)

   Cloud Foundry(简称CF)是一个大型可扩展性的APP引擎平台.CF可以帮助开发者快速的运行并延展新创建的APP,缩短与用户的反馈周期,同时使网络资源管理简单化自动化. 对于一名软件开发员, ...

4. travis-ci自动部署_如何使用Travis CI部署（几乎）零恐惧的Cloud Foundry应用

   travis-ci自动部署 by Robin Bobbitt 罗宾·波比(Robin Bobbitt) 如何使用Travis CI部署(几乎)零恐惧的Cloud Foundry应用 (How to d ...

5. SAP Netweaver和Cloud Foundry上的运行时进程

   AG3上执行ps命令,结果如下: Cloud Foundry 到安装目录的scripts folder下,打开脚本文件start.sh: 发现Cloud Foundry的启动逻辑:依次启动postgr ...

6. 如何在腾讯云上安装Cloud Foundry

   Cloud Foundry是VMware推出的业界第一个开源PaaS云平台,它支持多种框架.语言.运行时环境.云平台及应用服务,使开发人员能够在几秒钟内进行应用程序的部署和扩展,无需担心任何基础架构的 ...

7. 往ABAP gateway system上和Cloud Foundry上部署HTML5应用

   ABAP Gateway system 在我的公众号文章里有详细介绍:SAP Fiori应用的三种部署方式 用WebIDE部署 用Eclipse Team provider部署 执行report /U ...

8. 如何将SAP Multi Target应用部署到SAP云平台的Cloud Foundry环境去

   SHINA是SAP HANA Interactive Education的缩写,是一个demo应用,用于演示如何开发SAP HANA原生应用. 这个应用包含了sample数据以及HANA数据库表,vi ...

9. cloud foundry_介绍“又一个” Cloud Foundry Gradle插件

   cloud foundry 在与两个同事(感谢Mark Alston和Dave Malone !)一起使用自动Jenkins管道部署Cloud Foundry应用程序的过程中,我决定尝试编写Gradl ...

最新文章

1. 真正的 AI 内行盛会！智源大会带你刷新“世界第一”记录！
2. python自学教程 pdf-《Python编程从入门到精通》PDF高清完整版-PDF下载
3. 优秀logo设计解析_优秀Logo设计！汽车类标志表现手法
4. jQuery unbind 删除绑定事件 / 移除标签方法
5. linux 进程原理内存,linux进程通信之共享内存原理（基于linux 1.2.13）
6. JavaScript from C#(入门篇)
7. 设置tableView的分割线从最左端开始
8. java界面化二叉排序树_105-线索化二叉树代码实现2
9. 浅谈数据结构之主席树(线段树进阶版)
10. insert sort java_java插入排序 Insert sort实例
11. origin拟合曲线，并绘制曲线上某一点的切线
12. 正确区分CRM、OA、协同办公平台
13. 阿里和腾讯在泰国热战正酣，马云和马化腾要打世界大战？
14. 中文语音评测之thchs30+gop_speechocean762实现
15. 【陈工笔记】# 如何用WPS演示给PPT加水印 #
16. 用vue实现，鼠标悬停放大图片，根据鼠标位置倾斜图片网页源码
17. ResponseEntity进行下载
18. Task1.2 A.I. 发展史
19. 普元软件推动企业应用架构转型互联网
20. linux 查看文件列表,linux显示文件列表命令ls，使用ls --help列出所有命令参数

热门文章

1. Jsp+Sevlet新闻发布系统
2. treeview获取选中 vb_VB.NET中treeview使用方法一
3. linux内核二叉查找树的应用
4. Android系统的使用量全面超过Windows
5. 红外相机盲点和热点的分布图。
6. 常用char 类型函数的介绍
7. webrtc示例peerconnection_clientserver
8. 思科DHCP简易操作
9. Day.js替代moment.js
10. Seam框架学习之一(Seam vs Spring -- state vs stateless)