qla2xxx 0000:04:00.0: scsi(1:0:2): Abort command issued -- 1 1b22e 2002.
2024-06-02 19:14:22
又一存储类故障,
两台DELL R610服务器.
HBA : 04:00.0 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA (rev 03)
SWITCH ： Brocade 300
System : RHEL 5.6 64bit
Storage : EVA6400
device mapper : device-mapper-multipath-0.4.7-42.el5两台服务器同时报错:
qla2xxx 0000:04:00.0: scsi(1:0:2): Abort command issued -- 1 1b22e 2002.
qla2xxx 0000:04:00.0: scsi(1:0:2): Abort command issued -- 1 2603b 2002.
qla2xxx 0000:04:00.0: scsi(1:0:2): Abort command issued -- 1 2603c 2002.
qla2xxx 0000:04:00.1: scsi(2:0:2): Abort command issued -- 1 27437 2002.qla2xxx 0000:04:00.1: Performing ISP error recovery - ha= ffff81034a9404f8.
qla2xxx 0000:04:00.1: LIP reset occured (f700).
qla2xxx 0000:04:00.1: LIP occured (f700).
qla2xxx 0000:04:00.1: LIP reset occured (f7f7).
qla2xxx 0000:04:00.1: LOOP UP detected (4 Gbps).
qla2xxx 0000:04:00.1: qla2xxx_eh_bus_reset: reset succeeded
qla2xxx 0000:04:00.1: Mailbox command timeout occured. Issuing ISP abort.
qla2xxx 0000:04:00.1: Performing ISP error recovery - ha= ffff81034a9404f8.
qla2xxx 0000:04:00.1: Failed mailbox send register test
qla2xxx 0000:04:00.1: qla2x00_abort_isp: **** FAILED ****
qla2xxx 0000:04:00.1: scsi(2:0:2): Abort command issued -- 0 64981 2003.
qla2xxx 0000:04:00.1: Performing ISP error recovery - ha= ffff81034a9404f8.
qla2xxx 0000:04:00.1: LIP reset occured (f700).
qla2xxx 0000:04:00.1: LIP occured (f700).
qla2xxx 0000:04:00.1: LIP reset occured (f7f7).
qla2xxx 0000:04:00.1: LOOP UP detected (4 Gbps).
qla2xxx 0000:04:00.1: scsi(2:0:2): DEVICE RESET ISSUED.
qla2xxx 0000:04:00.1: Mailbox command timeout occured. Issuing ISP abort.
qla2xxx 0000:04:00.1: Performing ISP error recovery - ha= ffff81034a9404f8.
qla2xxx 0000:04:00.1: Failed mailbox send register test
qla2xxx 0000:04:00.1: qla2x00_abort_isp: **** FAILED ****
qla2xxx 0000:04:00.1: qla2xxx_eh_device_reset: device reset failed
qla2xxx 0000:04:00.1: Performing ISP error recovery - ha= ffff81034a9404f8.
qla2xxx 0000:04:00.1: LIP reset occured (f700).
qla2xxx 0000:04:00.1: LIP occured (f700).
qla2xxx 0000:04:00.1: LIP reset occured (f7f7).
qla2xxx 0000:04:00.1: LOOP UP detected (4 Gbps).
qla2xxx 0000:04:00.1: scsi(2:0:2): LOOP RESET ISSUED.
qla2xxx 0000:04:00.1: Mailbox command timeout occured. Issuing ISP abort.
qla2xxx 0000:04:00.1: Performing ISP error recovery - ha= ffff81034a9404f8.
qla2xxx 0000:04:00.1: Failed mailbox send register test
qla2xxx 0000:04:00.1: qla2x00_abort_isp: **** FAILED ****rport-2:0-0: blocked FC remote port time out: saving bindingrport-2:0-1: blocked FC remote port time out: saving binding提交qlogic CASE后建议执行:
ftp://ftp.qlogic.com/support/Hidden/scripts/qla_linux_info.sh不过执行到Gathering OS info: ... done
Gathering /sys files: ... done
Gathering /proc files: ... done
Gathering /etc files: ... done
Gathering module information: ... done
Gathering ethernet info: ... done
Gathering infiniband info: ... done
Gathering miscellaneous system info:
的时候，就卡住了.IOSTAT显示HBA连接的存储使用率100%.
等待QLOGIC出示解决办法了。
之前碰到过类似的情况，使用MSA2312fc的存储，后来故障原因是存储的控制器有问题。
在其他地方还找到一个类似案例，据说是存储端得问题，需要重建RAID（也就意味着数据要迁出去再迁回来）。
http://solutions.qlogic.com/KanisaSupportSite/dynamickc.do?externalId=Post-9128006&sliceId=Post-245254038&command=show&forward=threadedKC&kcId=Post-9128006
# 20110608 CASE被转到了DELL
又有一套收集日志的方法
http://support1.ap.dell.com/cn/zh/forum/thread.asp?fid=20&tid=276581
【其他】
尝试重新扫描设备 :
find /sys/class/scsi_host/host*/scan | while read line; do echo - - - > $line; done
参考 :
http://blog.163.com/digoal@126/blog/static/16387704020130144424699/
qla2xxx 0000:04:00.0: scsi(1:0:2): Abort command issued -- 1 1b22e 2002.相关推荐
- kernel: iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-7260-13.ucode failed with error -2
kernel: iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-7260-13.ucode failed with error -2 升级 ...
- Ubuntu 20.04安装CUDA失败导致系统黑屏消息nvidia 0000:01:00.0: can‘t change power state from D3cold to D0 的解决方法
Ubuntu 20.04安装CUDA失败导致系统黑屏消息nvidia 0000:01:00.0: can't change power state from D3cold to D0 的解决方法 贺志 ...
- 启动时出现 r8169 0000:02:00.0: firmware: agent loaded rtl_nic/rtl8168e-3.fw into memory
在调试一款产品时,启动过程中出现了 r8169 0000:02:00.0: firmware: agent loaded rtl_nic/rtl8168e-3.fw into memory的错误,会在 ...
- [BUG 记录] Unable to determine the device handle for GPU 0000:05:00.0: GPU is lost. Reboot the system
报错 GPU运行一段时间后出现: Unable to determine the device handle for GPU 0000:05:00.0: GPU is lost. Reboot the ...
- Unable to determine the device handle for GPU 0000:02:00.0: GPU is lost. Reboot the sys
在使用tensor2tensor进行训练的时候,设置worker_gpu=4 (显卡总数为4),运行一会儿就会出现下面的情况: Unable to determine the device hand ...
- NVIDIA显卡BUG解决 Unable to determine the device handle for GPU 0000:02:00.0: Unknown Error
报错 实验室去年到今年断了几次电,然后服务器上的2080Ti一直就感觉有点小毛病.属于是被折磨了几个月了. 然后前两周断电后,显卡就基本上完全用不了了,经常服务器开机都会失败.并且就算服务器开机成功过 ...
- linux c pci bar0读写,解决部分linux发行版内核加载时出现 pci 0000:01:00.0: BAR 6: no pa...
问题描述: 部分linux发行版安装在笔记本上时可能会出现类似如下错误提示: pci 0000:01:00.0: BAR 6: no parent found for of device pci 00 ...
- Open /sys/bus/pci/devices/0000:01:00.0/driver/unbind failed. err 13 (Permission denied)
问题描述 同事反馈在系统初始化时,写入设备驱动目录下的 unbind 文件将网卡从内核驱动解绑时会失败,报错信息如下: 200317 10:33:54.948 ERROR - Open /sys/bu ...
- Caffe + Ubuntu 15.04/16.04 + CUDA 7.5/8.0 在服务器上安装配置及卸载重新安装（已测试可执行）
本文参考如下: caffe 安装所需的所有资源可在百度网盘下载 链接: http://pan.baidu.com/s/1jIRJ6mU 提取密码:xehi 在服务器上为每个子用户拷贝caffe 使用 ...
最新文章
- Python学习笔记(Ⅰ)——Python程序结构与基础语法
- React路上遇到的Bug
- .net中的认证和授权（学习笔记）
- dos窗口输入 pip 显示不是内部或外部命令
- 鼠标聚焦到Input输入框时，按回车键刷新页面原因及解决方法
- 软件测试计划时要记住什么
- c语言作业题五六章答案,数据结构(C语言版)第五六章习题答案
- 为什么要用SSM开发框架来架构系统？
- html照片从模糊到清晰的渐变加载显示方法
- mysql 分页 pageindex_mysql 超1亿数据，优化分页查询
- pandas选取特定段
- 分层架构中各层之间关系如何界定,期待大家来讨论
- 转换小写金额为大写金额
- QEMU虚拟机源码分析概论
- jupyter notebook 上传压缩包解压方式
- day27-API-java流的三大分类,常用的流(文件流,对象流, 缓冲流, 转换流, PW)
- 在线电影订票系统 - 数据库建模
- 双系统，主系统损坏，如何启动另一个系统
- 音视频开发进阶｜第七讲：分辨率与帧率·上篇
- [JS] checkbox 选中/全选/反选/不选