记一次dlib安装失败

安装dlib失败了。
错误如下。

C:\Users\xxx>pip install dlib==19.9.0
Collecting dlib==19.9.0Using cached dlib-19.9.0.tar.gz (3.1 MB)
Building wheels for collected packages: dlibBuilding wheel for dlib (setup.py) ... errorERROR: Command errored out with exit status 1:command: 'D:\ProgramData\Anaconda3\python.exe' -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'C:\\Users\\xxx\\AppData\\Local\\Temp\\pip-install-7h9j1pno\\dlib\\setup.py'"'"'; __file__='"'"'C:\\Users\\xxx\\AppData\\Local\\Temp\\pip-install-7h9j1pno\\dlib\\setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d 'C:\Users\xxx\AppData\Local\Temp\pip-wheel-6yx2sjwy'cwd: C:\Users\xxx\AppData\Local\Temp\pip-install-7h9j1pno\dlib\Complete output (67 lines):running bdist_wheelrunning buildrunning build_pypackage init file 'dlib\__init__.py' not found (or not a regular file)running build_ext-- Building for: Visual Studio 14 2015CMake Warning (dev) in CMakeLists.txt:No project() command is present.  The top-level CMakeLists.txt file mustcontain a literal, direct call to the project() command.  Add a line ofcode such asproject(ProjectName)near the top of the file, but after cmake_minimum_required().CMake is pretending there is a "project(Project)" command on the firstline.This warning is for project developers.  Use -Wno-dev to suppress it.-- Selecting Windows SDK version  to target Windows 10.0.19042.-- The C compiler identification is unknown-- The CXX compiler identification is unknownCMake Error in CMakeLists.txt:No CMAKE_C_COMPILER could be found.CMake Error in CMakeLists.txt:No CMAKE_CXX_COMPILER could be found.-- Configuring incomplete, errors occurred!See also "C:/Users/xxx/AppData/Local/Temp/pip-install-7h9j1pno/dlib/build/temp.win-amd64-3.7/Release/CMakeFiles/CMakeOutput.log".See also "C:/Users/xxx/AppData/Local/Temp/pip-install-7h9j1pno/dlib/build/temp.win-amd64-3.7/Release/CMakeFiles/CMakeError.log".Traceback (most recent call last):File "<string>", line 1, in <module>File "C:\Users\xxx\AppData\Local\Temp\pip-install-7h9j1pno\dlib\setup.py", line 238, in <module>'Topic :: Software Development',File "D:\ProgramData\Anaconda3\lib\site-packages\setuptools\__init__.py", line 165, in setupreturn distutils.core.setup(**attrs)File "D:\ProgramData\Anaconda3\lib\distutils\core.py", line 148, in setupdist.run_commands()File "D:\ProgramData\Anaconda3\lib\distutils\dist.py", line 966, in run_commandsself.run_command(cmd)File "D:\ProgramData\Anaconda3\lib\distutils\dist.py", line 985, in run_commandcmd_obj.run()File "D:\ProgramData\Anaconda3\lib\site-packages\wheel\bdist_wheel.py", line 223, in runself.run_command('build')File "D:\ProgramData\Anaconda3\lib\distutils\cmd.py", line 313, in run_commandself.distribution.run_command(command)File "D:\ProgramData\Anaconda3\lib\distutils\dist.py", line 985, in run_commandcmd_obj.run()File "D:\ProgramData\Anaconda3\lib\distutils\command\build.py", line 135, in runself.run_command(cmd_name)File "D:\ProgramData\Anaconda3\lib\distutils\cmd.py", line 313, in run_commandself.distribution.run_command(command)File "D:\ProgramData\Anaconda3\lib\distutils\dist.py", line 985, in run_commandcmd_obj.run()File "C:\Users\xxx\AppData\Local\Temp\pip-install-7h9j1pno\dlib\setup.py", line 119, in runself.build_extension(ext)File "C:\Users\xxx\AppData\Local\Temp\pip-install-7h9j1pno\dlib\setup.py", line 153, in build_extensionsubprocess.check_call(cmake_setup, cwd=build_folder)File "D:\ProgramData\Anaconda3\lib\subprocess.py", line 363, in check_callraise CalledProcessError(retcode, cmd)subprocess.CalledProcessError: Command '['cmake', 'C:\\Users\\xxx\\AppData\\Local\\Temp\\pip-install-7h9j1pno\\dlib\\tools\\python', '-DCMAKE_LIBRARY_OUTPUT_DIRECTORY=C:\\Users\\xxx\\AppData\\Local\\Temp\\pip-install-7h9j1pno\\dlib\\build\\lib.win-amd64-3.7', '-DPYTHON_EXECUTABLE=D:\\ProgramData\\Anaconda3\\python.exe', '-DCMAKE_LIBRARY_OUTPUT_DIRECTORY_RELEASE=C:\\Users\\xxx\\AppData\\Local\\Temp\\pip-install-7h9j1pno\\dlib\\build\\lib.win-amd64-3.7', '-A', 'x64']' returned non-zero exit status 1.Invoking CMake setup: 'cmake C:\Users\xxx\AppData\Local\Temp\pip-install-7h9j1pno\dlib\tools\python -DCMAKE_LIBRARY_OUTPUT_DIRECTORY=C:\Users\xxx\AppData\Local\Temp\pip-install-7h9j1pno\dlib\build\lib.win-amd64-3.7 -DPYTHON_EXECUTABLE=D:\ProgramData\Anaconda3\python.exe -DCMAKE_LIBRARY_OUTPUT_DIRECTORY_RELEASE=C:\Users\xxx\AppData\Local\Temp\pip-install-7h9j1pno\dlib\build\lib.win-amd64-3.7 -A x64'----------------------------------------ERROR: Failed building wheel for dlibRunning setup.py clean for dlib
Failed to build dlib
Installing collected packages: dlibRunning setup.py install for dlib ... errorERROR: Command errored out with exit status 1:command: 'D:\ProgramData\Anaconda3\python.exe' -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'C:\\Users\\xxx\\AppData\\Local\\Temp\\pip-install-7h9j1pno\\dlib\\setup.py'"'"'; __file__='"'"'C:\\Users\\xxx\\AppData\\Local\\Temp\\pip-install-7h9j1pno\\dlib\\setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record 'C:\Users\xxx\AppData\Local\Temp\pip-record-3goh2mbm\install-record.txt' --single-version-externally-managed --compile --install-headers 'D:\ProgramData\Anaconda3\Include\dlib'cwd: C:\Users\xxx\AppData\Local\Temp\pip-install-7h9j1pno\dlib\Complete output (69 lines):running installrunning buildrunning build_pypackage init file 'dlib\__init__.py' not found (or not a regular file)running build_ext-- Building for: Visual Studio 14 2015CMake Warning (dev) in CMakeLists.txt:No project() command is present.  The top-level CMakeLists.txt file mustcontain a literal, direct call to the project() command.  Add a line ofcode such asproject(ProjectName)near the top of the file, but after cmake_minimum_required().CMake is pretending there is a "project(Project)" command on the firstline.This warning is for project developers.  Use -Wno-dev to suppress it.-- Selecting Windows SDK version  to target Windows 10.0.19042.-- The C compiler identification is unknown-- The CXX compiler identification is unknownCMake Error in CMakeLists.txt:No CMAKE_C_COMPILER could be found.CMake Error in CMakeLists.txt:No CMAKE_CXX_COMPILER could be found.-- Configuring incomplete, errors occurred!See also "C:/Users/xxx/AppData/Local/Temp/pip-install-7h9j1pno/dlib/build/temp.win-amd64-3.7/Release/CMakeFiles/CMakeOutput.log".See also "C:/Users/xxx/AppData/Local/Temp/pip-install-7h9j1pno/dlib/build/temp.win-amd64-3.7/Release/CMakeFiles/CMakeError.log".Traceback (most recent call last):File "<string>", line 1, in <module>File "C:\Users\xxx\AppData\Local\Temp\pip-install-7h9j1pno\dlib\setup.py", line 238, in <module>'Topic :: Software Development',File "D:\ProgramData\Anaconda3\lib\site-packages\setuptools\__init__.py", line 165, in setupreturn distutils.core.setup(**attrs)File "D:\ProgramData\Anaconda3\lib\distutils\core.py", line 148, in setupdist.run_commands()File "D:\ProgramData\Anaconda3\lib\distutils\dist.py", line 966, in run_commandsself.run_command(cmd)File "D:\ProgramData\Anaconda3\lib\distutils\dist.py", line 985, in run_commandcmd_obj.run()File "D:\ProgramData\Anaconda3\lib\site-packages\setuptools\command\install.py", line 61, in runreturn orig.install.run(self)File "D:\ProgramData\Anaconda3\lib\distutils\command\install.py", line 545, in runself.run_command('build')File "D:\ProgramData\Anaconda3\lib\distutils\cmd.py", line 313, in run_commandself.distribution.run_command(command)File "D:\ProgramData\Anaconda3\lib\distutils\dist.py", line 985, in run_commandcmd_obj.run()File "D:\ProgramData\Anaconda3\lib\distutils\command\build.py", line 135, in runself.run_command(cmd_name)File "D:\ProgramData\Anaconda3\lib\distutils\cmd.py", line 313, in run_commandself.distribution.run_command(command)File "D:\ProgramData\Anaconda3\lib\distutils\dist.py", line 985, in run_commandcmd_obj.run()File "C:\Users\xxx\AppData\Local\Temp\pip-install-7h9j1pno\dlib\setup.py", line 119, in runself.build_extension(ext)File "C:\Users\xxx\AppData\Local\Temp\pip-install-7h9j1pno\dlib\setup.py", line 153, in build_extensionsubprocess.check_call(cmake_setup, cwd=build_folder)File "D:\ProgramData\Anaconda3\lib\subprocess.py", line 363, in check_callraise CalledProcessError(retcode, cmd)subprocess.CalledProcessError: Command '['cmake', 'C:\\Users\\xxx\\AppData\\Local\\Temp\\pip-install-7h9j1pno\\dlib\\tools\\python', '-DCMAKE_LIBRARY_OUTPUT_DIRECTORY=C:\\Users\\xxx\\AppData\\Local\\Temp\\pip-install-7h9j1pno\\dlib\\build\\lib.win-amd64-3.7', '-DPYTHON_EXECUTABLE=D:\\ProgramData\\Anaconda3\\python.exe', '-DCMAKE_LIBRARY_OUTPUT_DIRECTORY_RELEASE=C:\\Users\\xxx\\AppData\\Local\\Temp\\pip-install-7h9j1pno\\dlib\\build\\lib.win-amd64-3.7', '-A', 'x64']' returned non-zero exit status 1.Invoking CMake setup: 'cmake C:\Users\xxx\AppData\Local\Temp\pip-install-7h9j1pno\dlib\tools\python -DCMAKE_LIBRARY_OUTPUT_DIRECTORY=C:\Users\xxx\AppData\Local\Temp\pip-install-7h9j1pno\dlib\build\lib.win-amd64-3.7 -DPYTHON_EXECUTABLE=D:\ProgramData\Anaconda3\python.exe -DCMAKE_LIBRARY_OUTPUT_DIRECTORY_RELEASE=C:\Users\xxx\AppData\Local\Temp\pip-install-7h9j1pno\dlib\build\lib.win-amd64-3.7 -A x64'----------------------------------------
ERROR: Command errored out with exit status 1: 'D:\ProgramData\Anaconda3\python.exe' -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'C:\\Users\\xxx\\AppData\\Local\\Temp\\pip-install-7h9j1pno\\dlib\\setup.py'"'"'; __file__='"'"'C:\\Users\\xxx\\AppData\\Local\\Temp\\pip-install-7h9j1pno\\dlib\\setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record 'C:\Users\xxx\AppData\Local\Temp\pip-record-3goh2mbm\install-record.txt' --single-version-externally-managed --compile --install-headers 'D:\ProgramData\Anaconda3\Include\dlib' Check the logs for full command output.

结果，安装dlib-bin效果也是一样。

C:\Users\xxx>pip install dlib-bin
Collecting dlib-binDownloading dlib_bin-19.21.0-cp37-cp37m-win_amd64.whl (3.5 MB)|████████████████████████████████| 3.5 MB 731 kB/s
Installing collected packages: dlib-bin
Successfully installed dlib-bin-19.21.0

In [1]: import dlibIn [2]: dlib.__version__
Out[2]: '19.21.0'

记一次dlib安装失败相关推荐

记一次GI安装失败（root.sh在第一个node上失败）的调试经历
新拿到一个c'lu'ster,尝试安装GI(grid infrastructure),root.sh在第一个node上失败了.调试过程第一步:首先查看log 在root.sh的log里看到如下的错 ...
python3.7安装face_recognition和dlib安装失败的问题解决方法
目前python3.7安装dlib只能安装19.17版本,其他版本均不支持,但安装这个版本后face_recognition便安装不了因为需要dlib19.7更高版本才能安装,那如何解决呢? 解决方法 ...
dlib安装失败解决办法
win+r 输入cmd 然后出现终端界面,并输入如下命令: conda install -c conda-forge dlib
python3.9 dlib安装失败问题
首先需要下载cp39的适用whl 链接:https://pan.baidu.com/s/1L6I2HI7bWML1TrrRd2j46Q 提取码:x49o 下载后把这个文件放到C盘根目录下通过cd ...
python pip安装第三方库老是报错_#python pip 安装dlib一直失败？#python安装dlib错误...
#python pip 安装dlib一直失败?#python安装dlib错误 python dlib 教程2020-10-11 07:52:36人已围观 ubuntu里面怎么安装dlib 下面是在ub ...
dlib在线安装失败解决方案，如何离线下载和安装
问题 pip install 安装失败解决方案 1 寻找离线安装文件手动搜索:https://pypi.org/simple/dlib/ 2 下载 3 解压并切换到相应的目录 4 安装 pytho ...
惠普P1100 series “打印机安装失败，未安装打印机”问题解决方法
记一次罕见的惠普打印机驱动安装失败的解决方案在新组装电脑上使用官方驱动安装惠普P1108驱动时,一直出现"打印机安装失败,未安装打印机"的问题. 首先,我尝试了在"设备 ...
1. CUDA安装失败解决方法
CUDA安装失败原因一般CUDA安装失败都是由于其中Visual Studio(VS) Intergration无法安装导致的: 当然可以通过自定义的方式取消Visual Studio Interg ...
dlib安装与imglab制作数据集
dlib安装很多人可能苦于dlib的安装,很多博主写到需要studio环境等,还有版本问题.但后来博主走了很多弯路,发现根本没必要这样.在python3.6环境中直接 pip install dli ...

记一次dlib安装失败

记一次dlib安装失败

记一次dlib安装失败相关推荐

最新文章

热门文章