lamp安装指南(转)
主要软件包,
1. httpd-2.2.6.tar.gz
2. mysql-5.0.45-linux-i686-glibc23.tar.gz ( 这个版本是已编译好的压缩包,解压后稍做配置即可使用 )
3. php-5.2.5.tar.gz
安装 php 所需的软件包(其中 libxml2 是安装 php5 必须的 . )
1. libxml2-(version).tar.gz ---> http://ftp.gnome.org/pub/GNOME/sources/libxm2
2. libxslt-(version).tar.gz ---> http://ftp.gnome.org/pub/GNOME/sources/libxslt
3. curl-(version).tar.gz ---> http://curl.haxx.se/download
GD 库所需要软件包(有人说 PHP 源码包里自带了 GD2.0.28 和 zlib ,只要安装 GD 的三个支持包: jpg,png 和 freetype ,但是我们还是下载)
1. gd-(version).tar.gz ---> http://www.libgd.org/Main_Page or http://www.libgd.org/releases/
2. freetype-(version).tar.gz ---> http://sourceforge.net/projects/freetype
3. jpegsrc.v6b.tar.gz ---> http://ijg.org/files/jpegsrc.v6b.tar.gz
4. libpng-(version).tar.gz ---> http://www.libpng.org/pub/png/libpng.html
5. zlib-1.2.3.tar.gz ---> http://www.zlib.net
把以上所有软件包下载到: /root/Software/ 目录下 .
二:安装 mysql
# tar -zvxf mysql-5.0.45-linux-i686-glibc23.tar.gz
# mkdir -p /usr/local/mysql
# cp -r mysql-5.0.45 /usr/local/mysql
# cp /usr/local/mysql/support-files/mysql.server /etc/rc.d/init.d/mysql // 开机启动 mysql
# cp /usr/local/mysql/support-files/my-medium.cnf /etc/my.cnf
添加 mysql 用户及用户组
# groupadd mysql
# useradd -g mysql mysql
修改 mysql 目录权限
# chown -R root /usr/local/mysql
# chgrp -R mysql /usr/local/mysql
# chown -R mysql /usr/local/mysql/data
生成 mysql 系统数据库
# /usr/local/mysql/scripts/mysql_install_db --user=mysql& // 启动 mysql 服务
# /usr/local/mysql/bin/mysqld_safe --user=mysql&
如出现 Starting mysqld daemon with databases from /usr/local/mysql/data 代表正常启动 mysql 服务了 .
按 Ctrl + C 跳出修改 mysql 的 root 密码
# /usr/local/mysql/bin/mysqladmin -u root -p password "123456"
三:安装 GD 库 ( 让 PHP 支持 GIF,PNG,JPEG)
a. 安装 jpeg6 建立目录:
# mkdir -p /usr/local/jpeg6
# mkdir -p /usr/local/jpeg6/bin
# mkdir -p /usr/local/jpeg6/lib
# mkdir -p /usr/local/jpeg6/include
# mkdir -p /usr/local/jpeg6/man
# mkdir -p /usr/local/jpeg6/man1
# mkdir -p /usr/local/jpeg6/man/man1
# cd /root/Software/
# tar -zvxf jpegsrc.v6b.tar.gz
# cd jpeg6
# ./configure --prefix=/usr/local/jpeg6/ --enable-shared --enable-static
# make
# make install
b.libpng 包 ( 支持 PNG)
# cd /root/Software/
# tar -zvxf libpng-(version).tar.gz
# cd libpng-(version)
# ./configure --prefix=/usr/local/libpng
# make
#> make install
c. 安装 freetype
# cd /root/Software/
# tar -zvxf freetype-(version).tar.gz
# cd freetype-(version)
# mkdir -p /usr/local/freetype
# ./configure --prefix=/usr/local/freetype
# make
# make install
d. 安装 zlib
# cd /root/Software/
# tar -zxvf zlib-1.2.3.tar.gz
# cd zlib.1.2.3
# mkdir /usr/local/zlib
# ./configure --prefix=/usr/local/zlib
# make
# make install
e. 安装 GD 库
# cd /root/Software/
# tar -zvxf gd-(version).tar.gz
# mkdir -p /usr/local/gd2
# cd gd-(version)
# ./configure --prefix=/usr/local/gd2 --with-jpeg=/usr/local/jpeg6 --with-zlib-dir=/usr/local/zlib --with-png=/usr/local/libpng --with-freetype=/usr/local/freetype
# make
# make install
e. 安装 Curl 库
# cd /root/Software/
# tar -zxf curl-(version).tar.gz
# mkdir -p /usr/local/curl
# ./configure --prefix=/usr/local/curl
# make
# make install
四:安装 apache2
# cd /roo/Software/
# tar -zvxf httpd-2.2.6.tar.gz
# cd httpd-2.2.6
# mkdir -p /usr/local/apache2
# ./configure --prefix=/usr/local/apache --enable-modules=so --enable-rewrite
# make
# make install
# /usr/local/apache2/bin/apachectl -k start // 启动 apahce
用浏览器查看 http://localhost, 得到 it works ,说明 apache 已经配置成功了 .
# /usr/local/apache2/bin/apachectl -k stop // 停止 apache
五:安装 php5 , php5 必须有 libxml2 支持 !
a. 安装 libxml2
# cd /root/Software/
# tar -zvxf libxml2-(version).tar.gz
# cd libxml2-(version)
# mkdir -p /usr/local/libxml2
# ./configure --prefix=/usr/local/libxml2
# make
# make install
b. 安装 libxslt ( 可选安装,你可以不安装 )
# cd /root/Software/
# tar -zvxf libxslt-(version).tar.gz
# mkdir -p /usr/local/libxslt
# cd libxslt-(version)
# ./configure --prefix=/usr/local/libxslt --with-libxml-prefix=/usr/local/libxml2
# make
# make install
c. 安装 php5
# cd /root/Software/
# tar -zvxf php-(version).tar.gz
# mkdir -p /usr/local/php5
# cd php-(version)
# ./configure --prefix=/usr/local/php5 --with-apxs2=/usr/local/apache2/bin/apxs \
>--with-gd=/usr/local/gd2 --with-jpeg-dir=/usr/local/jpeg6 \
>--with-zlib-dir=/usr/local/zlib \
>--with-png-dir=/usr/local/libpng \
>--with-freetype-dir=/usr/local/freetype -\
>--enable-trace-vars --with-mysql=/usr/local/mysql \
>--enable-mbstring=all --with-curl=/usr/local/curl --enable-mbregex \
>--with-config-file-path=/usr/local/php5 --enable-ftp \
>--enable-soap --with-xsl=/usr/local/libxslt
# make
# make install
# cp php.ini-dist /usr/local/php5/php.ini (别忘记了呵呵)
六:重新配置 apache2 让他支持 php
# cd /usr/local/apache2/conf
# vim httpd.conf
在 LoadModule php5_module modules/libphp5.so
添加 AddType application/x-httpd-php .php
OK, 基本的安装已经完成 .
重新起动 APACHE:
# /usr/local/apache2/bin/apachectl start
如果重新起动 APACHE 出现 :
Syntax error on line 232 of /usr/local/apache2/conf/httpd.conf: Cannot load /usr/local/apache2/modules/libphp5.so into server:
/usr/local/apache2/modules/libphp4.so: cannot restore segment prot after reloc: Permission denied
那就要按照下面的方法解决 :
1.chcon -t texrel_shlib_t /usr/local/apache2/modules/*.so
2. 编辑 /etc/selinux/config ,找到这段:
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - SELinux is fully disabled.
SELINUX=enforcing
把 SELINUX=enforcing 注释掉: #SELINUX=enforcing ,然后新加一行为:
SELINUX=disabled
保存,关闭。
编辑 /etc/sysconfig/selinux ,找到 :
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing - SELinux security policy is enforced.
# permissive - SELinux prints warnings instead of enforcing.
# disabled - SELinux is fully disabled.
SELINUX=enforcing
如果 SELINUX 已经是 SELINUX=disabled ,那么就不用改了,否则就把 SELINUX=enforcing 注释掉,新加一行:
SELINUX=disabled
保存,退出。
lamp安装指南(转)相关推荐
- centos5.2 lamp安装指南
RPM包和源码包存放位置 /usr/local/src 源码包编译安装位置(prefix) /usr/local/xxx 脚本以及维护程序存放位置 /usr/local/sbin MySQL 位置 / ...
- LAMP环境搭建之编译安装指南(php-5.3.27.tar.gz)
测试环境:CentOS release 6.5 (Final) 软件安装:httpd-2.2.27.tar.gz mysql-5.1.72.tar.gz php-5.3.27.tar.gz 1 ...
- Linux之LAMP部署
Linux之LAMP部署 LAMP概述 LAMP环境部署:rpm安装方式 LAMP部署前期准备 LAMP环境之Apache安装 LAMP环境之MySQL安装 LAMP环境之PHP安装 LAMP源码包安 ...
- LAMP项目部署实战1
一.说明: LAMP:Linux + Apache + MySQL + PHP Apache: Apache是世界使用排名第一的Web服务器软件.主要用于接收用户的请求,处理业务逻辑,返回结果给客户端 ...
- LAMP项目部署实战
LAMP项目部署实战 一.LAMP环境部署 1.回顾LAMP LAMP = Linux + Apache + MySQL + PHP Apache:主要用于接收用户的请求,处理业务逻辑,返回结果给客户 ...
- linux - centos yum安装LAMP环境
1. centos 7.2 一般机器都带yum命令,并且yum包源都是可以用的,直接yum -y install 后面加上你所需要安装的软件,他会自动下载自动安装,非常方便. 例如 yum -y in ...
- LAMP 关键数据集锦技术选项参考
LAMP 关键数据集锦技术选项参考 源自日积月累自己的其他人的经验总结 负载均衡 LVS 工作在四层,内核态,性能极高,有VIP功能,配合 keepalived 做有效的 心跳检查和负载均衡安装配置 ...
- LAMP高级环境实战
LAMP架构应用实战 介绍 LAMP指的Linux(操作系统).Apache(HTTP 服务器),MySQL(数据库软件) 和PHP(有时也是指Perl或Python) 的第一个字母,一般用来建立we ...
- LAMP的安装及Xcache的配置
LAMP是Linux+Apache+MySQL+PHP的简称,意指以Linux作为服务器的操作系统,以Apache的HTTPD作为Web服务器,以PHP作为动态网页的解释器,以MySQL作为后端数据库 ...
最新文章
- 换种监控姿势:基于深度学习+流处理的时序告警系统
- MVC框架内容-视图
- simple-spring-memcached统一缓存的使用实例4
- Apple-Watch开发2 APPIcon设置
- Mysql练习_mysql练习题
- java获取密钥长度_java.security.InvalidKeyException:解密期间密钥大小错误
- 1.段描述符与段选择子
- 多个服务器数据互通_3月21日部分服务器数据互通公告!
- P4899 [IOI2018] werewolf 狼人(kruskal 重构树 + 主席树)
- Eclipse安装以及JDK环境变量配置
- 前端学习(1780):前端调试之快速转存站点的方法
- AIM Tech Round 4 (Div. 2)
- springboot整合ssm(mybatis)
- 论文赏析[ACL18]一个句子向量表示究竟可以塞进多少语言性质?
- Apache ProxyPass出现503 Service Temporarily Unavailable 的解决
- 操作系统原理与实践-1熟悉实验环境
- 【实践1】Python调用搜狗语音,自制语音识别转文字生成字幕软件,并生成会议纪录。
- pmp十大知识领域,49个过程的4W1H
- ps图片拖不进去_win10中ps图片不能拖进去怎么办-修复ps无法直接拖入的教程 - 河东软件园...
- Flutter升级空安全版本注意事项