python3.8如何正确安装使用ExcelLibrary

前因
- 新的改变
- 卸载excelLibrary
- 采用同样的办法，安装ride
- 关键字
- 如何使用excelLibrary，官方示例
- 注意事项
- 官方文档

前因

尝试过pip install robotframework-ExcelLibrary 会发现安装时报错。

(auto-venv) D:\Program Files\GitData\auto\AutoTest\AutoLink>pip install robotframework-ExcelLibrary==0.0.2
Collecting robotframework-ExcelLibrary==0.0.2Using cached robotframework-excellibrary-0.0.2.zip (61 kB)ERROR: Command errored out with exit status 1:command: 'D:\Program Files\GitData\auto\AutoTest\AutoLink\auto-venv\Scripts\python.exe' -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'C:\\Users\\EL128\\AppData\\Local\\Temp\\pip-install-6yxp68eu\\robotframework-excellibrary\\setup.py'"'"'; __file__='"'"'C:\\Users\\EL128\\AppData\\Local\\Temp\\pip-install-6yxp68eu\\robotframework-excellibrary\\setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' egg_info --egg-base 'C:\Users\EL128\AppData\Local\Temp\pip-pip-egg-info-m4sl5p0k'cwd: C:\Users\EL128\AppData\Local\Temp\pip-install-6yxp68eu\robotframework-excellibrary\Complete output (5 lines):Traceback (most recent call last):File "<string>", line 1, in <module>File "C:\Users\EL128\AppData\Local\Temp\pip-install-6yxp68eu\robotframework-excellibrary\setup.py", line 23, in <module>execfile(join(dirname(__file__), 'ExcelLibrary', 'version.py'))NameError: name 'execfile' is not defined----------------------------------------
ERROR: Command errored out with exit status 1: python setup.py egg_info Check the logs for full command output.
WARNING: You are using pip version 20.2.1; however, version 21.0.1 is available.
You should consider upgrading via the 'D:\Program Files\GitData\auto\AutoTest\AutoLink\auto-venv\Scripts\python.exe -m pip install --upgrade pip' command.

通过查询相关资料得知，python3版本已经淘汰了execfile，而是采用了exce
如果python3版本要使用excelLibrary的话，需要下载源码后对其源码进行相应的修改。

新的改变

修改后的源码包可取这里：

也可以自行取源码后修改，关于python3将Python2支持的execfile废弃掉了，用exec代替相关：
1.首先先离线安装包，安装包解压文件放在python安装路径下：如F:\python38\Lib\site-packages文件中，如果是虚拟环境，同样也可以放到虚拟环境对应的site-packages文件中。
robotframework-ExcelLibrary
离线下载链接：
https://files.pythonhosted.org/packages/b8/e7/8c079a814e7ad288ec2fc15671d8dc526e3d537bb00e4ab2b209a63674ed/robotframework-excellibrary-0.0.2.zip

2.第二步解压文件，如下图依次进行修改。（3.x print是个函数，必须加小括号进行函数调用）
2.1文件 setup.py

#execfile(join(dirname(file), ‘ExcelLibrary’, ‘version.py’))
exec(open(join(dirname(file), ‘ExcelLibrary’, ‘version.py’)).read())

2.2文件 ExcelLibrary.py
第一个
将所有的print xxx 语句修改为 print（xxx）

第二个
#from version import VERSION

from .version import VERSION

2.3文件 init.py

#from ExcelLibrary import ExcelLibrary
#from version import VERSION

from .ExcelLibrary import ExcelLibrary
from .version import VERSION

3.第三步我们无法通过pip安装，只能手动安装了，使用 python setup.py install

python setup.py install 属于离线安装，安装方式：下载好压缩包 ->解压 -> 在解压目录的当前文件夹下，打开终端，输入： python setup.py install　即可

(auto-venv) D:\Program Files\GitData\auto\AutoTest>cd robotframework-excellibrary-0.0.2(auto-venv) D:\Program Files\GitData\auto\AutoTest\robotframework-excellibrary-0.0.2>python setup.py install
c:\python38\lib\distutils\dist.py:274: UserWarning: Unknown distribution option: 'install_requires'warnings.warn(msg)
running install
running build
running build_py
copying ExcelLibrary\__init__.py -> build\lib\ExcelLibrary
running install_lib
running install_data
running install_egg_info
Writing D:\Program Files\GitData\auto\AutoTest\AutoLink\auto-venv\Lib\site-packages\robotframework_excellibrary-0.0.2-py3.8.egg-info

4、安装成功后，pip list查看

(auto-venv) D:\Program Files\GitData\auto\AutoTest\robotframework-excellibrary-0.0.2>pip list
Package                               Version
------------------------------------- ----------
aniso8601                             9.0.1
appdirs                               1.4.4
Appium-Python-Client                  0.26
APScheduler                           3.5.1
bcrypt                                3.2.0
blinker                               1.4
certifi                               2020.12.5
cffi                                  1.14.5
chardet                               3.0.4
click                                 7.1.2
ConfigArgParse                        1.2.3
cryptography                          3.4.6
decorator                             4.4.2
distlib                               0.3.1
docutils                              0.16
et-xmlfile                            1.0.1
filelock                              3.0.12
Flask                                 0.11
Flask-APScheduler                     1.8.0
Flask-BasicAuth                       0.2.0
Flask-Login                           0.2.11
Flask-Mail                            0.9.0
Flask-RESTful                         0.3.6
Flask-Script                          2.0.6
Flask-SSLify                          0.1.5
future                                0.18.2
gevent                                20.6.2
geventhttpclient                      1.4.4
greenlet                              0.4.16
idna                                  2.6
install                               1.3.4
itsdangerous                          1.1.0
Jinja2                                2.8
kitchen                               1.2.6
locust                                1.1.1
MarkupSafe                            1.1.1
msgpack                               1.0.0
natsort                               7.1.1
numpy                                 1.20.1
openpyxl                              3.0.7
paramiko                              2.7.2
Pillow                                8.1.2
pip                                   20.2.1
psutil                                5.7.2
pycparser                             2.20
Pygments                              2.8.1
PyNaCl                                1.4.0
Pypubsub                              4.0.3
python-dateutil                       2.7.3
pytz                                  2021.1
pywin32                               300
pyzmq                                 19.0.2
requests                              2.18.4
robotframework                        3.0.3
robotframework-appiumlibrary          1.4.6
robotframework-databaselibrary        1.0.1
robotframework-excellib-xlsm          2.0.3
robotframework-excellibrary           0.0.2
robotframework-excellibrary-xwfintech 0.0.3
robotframework-requests               0.4.7
robotframework-ride                   2.0b2.dev1
robotframework-seleniumlibrary        3.1.1
robotframework-sshlibrary             3.1.1
selenium                              3.141.0
setuptools                            49.2.1
six                                   1.15.0
tzlocal                               2.1
urllib3                               1.22
virtualenv                            20.0.30
Werkzeug                              0.14.1
wheel                                 0.34.2
wxPython                              4.1.1
xlrd                                  2.0.1
xlutils                               2.0.0
xlwt                                  1.3.0
zope.event                            4.4
zope.interface                        5.1.0
WARNING: You are using pip version 20.2.1; however, version 21.0.1 is available.
You should consider upgrading via the 'D:\Program Files\GitData\auto\AutoTest\AutoLink\auto-venv\Scripts\python.exe -m pip install --upgrade pip' command.(auto-venv) D:\Program Files\GitData\auto\AutoTest\robotframework-excellibrary-0.0.2>

5.重新开启ride，导入ExcelLibrary，成功
备注：由于ride与python3.8也不兼容，目前安装也报错。正在处理中，等待后续。

参考文章：
https://blog.csdn.net/weixin_44408772/article/details/103815610
https://blog.csdn.net/cfpyl/article/details/97808447

卸载excelLibrary

手动将其卸载：

1）浏览C:\Python27\ExcelRobotTest并删除ExcelRobotTest.txt和ExcelLibrary-KeywordDocumentation.html

2）浏览C:\Python27\Lib\site-packages并删除robotframework-excellibrary-0.0.2-py2.7.egg-info和文件夹robotframework-excellibrary

采用同样的办法，安装ride

下载RIDE开发版：https://github.com/robotframework/RIDE/archive/master.zip，然后解压缩；在命令行窗口用cd命令跳转到解压缩目录运行安装；

python setup.py install

D:\PythonProject\plugins\RIDE-master>python setup.py install
C:\Python38\lib\site-packages\setuptools\dist.py:471: UserWarning: Normalizing 'v2.0b2.dev1' to '2.0b2.dev1'warnings.warn(
running install
running build
running build_py
running build_scripts
running install_lib
copying build\lib\robotide\action\action.py -> C:\Python38\Lib\site-packages\robotide\action
copying build\lib\robotide\action\actioninfo.py -> C:\Python38\Lib\site-packages\robotide\action
copying build\lib\robotide\action\shortcut.py -> C:\Python38\Lib\site-packages\robotide\action
\\\
\\\
\\\
warning: manifest_maker: MANIFEST.in, line 10: 'recursive-include' expects <dir> <pattern1> <pattern2> ...writing manifest file 'src\robotframework_ride.egg-info\SOURCES.txt'
removing 'C:\Python38\Lib\site-packages\robotframework_ride-2.0b2.dev1-py3.8.egg-info' (and everything under it)
Copying src\robotframework_ride.egg-info to C:\Python38\Lib\site-packages\robotframework_ride-2.0b2.dev1-py3.8.egg-info
running install_scripts
copying build\scripts-3.8\ride.py -> C:\Python38\Scripts
copying build\scripts-3.8\ride_postinstall.py -> C:\Python38\Scripts
Creating Desktop Shortcut to RIDE...
wxPython is installed.
4.1.1 msw (phoenix) wxWidgets 3.1.5
Result True
Desktop shortcut created for all users.

4、安装过程中，选择创建桌面快捷方式，桌面出现，安装完成，打开界面。
问题：双击桌面快捷方式运行不了ride

来源：https://blog.csdn.net/u012100968/article/details/108773220

下载地址：

火狐： https://github.com/mozilla/geckodriver/releases

谷歌：http://chromedriver.storage.googleapis.com/index.html

IE： http://selenium-release.storage.googleapis.com/index.html

Edge： https://developer.microsoft.com/en-us/microsoft-edge/tools/webdriver/

Opera：https://github.com/operasoftware/operachromiumdriver/releases

PhantomJS：http://phantomjs.org/

驱动参考链接：https://blog.csdn.net/qupan1993/article/details/99945299

安装包参考链接：https://blog.csdn.net/weixin_45223124/article/details/105854202

引入excelLibrary
手动安装了excelLibrary后，引入excelLibrary时还报错缺少如下模块：natsort、xlrd、xlwt、xlutils
逐一采用命令：pip install xxx 进行安装，如下

(autolinkVenv) D:\PythonProject\pyEvens\autolinkVenv\Scripts>pip install natsort
Collecting natsortUsing cached natsort-7.1.1-py3-none-any.whl (35 kB)
Installing collected packages: natsort
Successfully installed natsort-7.1.1(autolinkVenv) D:\PythonProject\pyEvens\autolinkVenv\Scripts>pip install xlrd
Collecting xlrdUsing cached xlrd-2.0.1-py2.py3-none-any.whl (96 kB)
Installing collected packages: xlrd
Successfully installed xlrd-2.0.1(autolinkVenv) D:\PythonProject\pyEvens\autolinkVenv\Scripts>pip install xlwt
Collecting xlwtUsing cached xlwt-1.3.0-py2.py3-none-any.whl (99 kB)
Installing collected packages: xlwt
Successfully installed xlwt-1.3.0(autolinkVenv) D:\PythonProject\pyEvens\autolinkVenv\Scripts>pip install xlutils
Collecting xlutilsUsing cached xlutils-2.0.0-py2.py3-none-any.whl (55 kB)
Requirement already satisfied: xlwt>=0.7.4 in d:\pythonproject\pyevens\autolinkvenv\lib\site-packages (from xlutils) (1.3.0)
Requirement already satisfied: xlrd>=0.7.2 in d:\pythonproject\pyevens\autolinkvenv\lib\site-packages (from xlutils) (2.0.1)
Installing collected packages: xlutils
Successfully installed xlutils-2.0.0(autolinkVenv) D:\PythonProject\pyEvens\autolinkVenv\Scripts>

引入第三方库的时候，一定要指明全路径，如：

*** Settings ***
Library     Collections
Library     RequestsLibrary
Library     D:\\PythonProject\\pyEvens\\autolinkVenv\\Lib\\site-packages\\ExcelLibrary

*** Variables ***
${excel_path}    D:\\PythonProject\\PyDatas\\鉴权接口用例.xls

且一定要用xls后缀的文档。

关键字

ExcelLibrary库常用关键字

Open Excel 打开Excel文件
Get Row Count 获取行数
Get Column Count 获取列数
Get Row Values 获取某一行的值
Get Column Values 获取某一列的值
Read Cell Data By Coordinates 通过列行编号获取值
Read Cell Data By Name 按名称读取单元格数据

如何使用excelLibrary，官方示例

*** Settings ***
Library             ExcelLibrary
Library             Collections*** Variables ***
${Names}
${Num}
${Excel_File_Path}   C:\\Python27\\ExcelRobotTest\\
${SheetName}         Graph Data
${NewSheetName}      NewSheet*** Test Cases ***
Excel TestGet Values and Modify SpreadsheetAdd Date To SheetPerform Function and Change DateCreate a New ExcelAdd a New SheetCheck New Sheet Values*** Keywords ***
Get Values and Modify SpreadsheetOpen Excel Current Directory   ExcelRobotTest.xls${Names}=      Get Sheet NamesSet Suite Variable   ${Names}${Num}=        Get Number of SheetsSet Suite Variable   ${Num}${Col}=        Get Column Count    TestSheet1${Row}=        Get Row Count       TestSheet1${ColVal}=     Get Column Values   TestSheet2   1${RowVal}=     Get Row Values      TestSheet2   1${Sheet}=      Get Sheet Values    DataSheetLog   ${Sheet}${Workbook}=   Get Workbook Values   FalseLog   ${Workbook}${ByName}=     Read Cell Data By Name          GraphSheet   B2${ByCoords}=   Read Cell Data By Coordinates   GraphSheet   1   1Check Cell Type      TestSheet1   0   1Put Number To Cell   TestSheet1   1   1   90Put String To Cell   TestSheet3   1   1   yellowPut Date To Cell     TestSheet2   1   1   1.4.1989Put Date To Cell     TestSheet2   1   2   12.10.1991Save Excel           ${Excel_File_Path}TestExcel.xlsAdd Date To SheetOpen Excel        ${Excel_File_Path}TestExcel.xlsAdd To Date       TestSheet2   1   2   5Check Cell Type   TestSheet2   1   2Save Excel        ${Excel_File_Path}NewDateExcel.xlsPerform Function and Change DateOpen Excel           ${Excel_File_Path}NewDateExcel.xlsModify Cell With     TestSheet1   1   1   *   45Subtract From Date   TestSheet2   1   1   1Save Excel           ${Excel_File_Path}FunctionExcel.xlsCreate a New ExcelCreate Excel Workbook    NewExcelSheetSave Excel               ${Excel_File_Path}NewExcel.xlsAdd a New SheetOpen Excel      ${Excel_File_Path}FunctionExcel.xlsAdd New Sheet   ${NewSheetName}Save Excel      ${Excel_File_Path}NewSheetExcel.xlsCheck New Sheet ValuesOpen Excel     ${Excel_File_Path}NewSheetExcel.xls${NewNames}=   Get Sheet Names${NewNum}=     Get Number of SheetsShould Not Be Equal As Strings    ${Names}   ${NewNames}Should Not Be Equal As Integers   ${Num}     ${NewNum}${Sheet}=      Get Sheet Values   TestSheet3   FalseLog            ${Sheet}${stringList}=   Convert To String   ${Sheet}Should Contain   ${stringList}   yellow

注意事项

ExcelLibrary库使用注意事项：
使用关键字“添加新图纸”时，用户无法在当前打开的工作簿上的此关键字之前或之后执行任何功能。使用关键字“添加新工作表”时，其他关键字所做的更改将不会保存。他们必须先添加一张工作表，然后保存工作簿，然后再使用其他任何关键字。如果他们想在工作簿上使用其他任何关键字，则必须再次打开工作簿才能这样做。
我们无法使用xlsx文件，因为尚未在xlrd库中实现该文件。进一步的信息可以在这里找到，并讨论了这里。要解决此问题，用户可以保存带有xls扩展名的excel文件，这是Microsoft Excel 97-2003工作表。

after this keyword on the currently open workbook. The changes that other keywords make will not be saved when the keyword Add New Sheet is used. They must add a sheet then save the workbook before using any other keyword. If they want to use any other keywords on the workbbok they must open the workbook again to do so.
We cannot use xlsx files as this has not been implemented in the xlrd library. Further information can be found here and discussed here. To get round this issue, the user can save the excel files with the xls extension, this is a Microsoft Excel 97-2003 Worksheet.

1.只支持xls格式的Excel文档
2.Excel表格中的数值，代码读取后会显示为浮点型
如123，读取后显示为123.00，造成传参不一致
解决方案：设置单元格格式---->文本
3.读取每行或每列数据，存储到list变量中，是一个二维数组
如（A1，123）(B1,张三)
4.数组的位置编号都是从0开始的

疑难点：
1、python读取的excel文档数字带有小数点

办法1	办法2
数字和日期的单元格内容前加上一个英文的逗号	通过程序代码判断单元格内容的ctype来解决

办法2示例：

 for i in range(rows):if i==0:continuerow_content = []for j in range(cols-1):ctype = sheet.cell(i, j).ctype  # 表格的数据类型cell = sheet.cell_value(i, j)if ctype == 2 and cell % 1 == 0.0:  # ctype为2且为浮点cell = int(cell)  # 浮点转成整型print(cell)

官方文档

一定要查阅官方文档，比在百度google一段乱查询好

http://navinet.github.io/robotframework-excellibrary/

python3.8如何正确安装使用ExcelLibrary相关推荐

Mac-OSX的Python3.5虚拟环境下安装Opencv
Mac-OSX的Python3.5虚拟环境下安装Opencv 1 关键词关键词:Mac,OSX,Python3.5,Virtualenv,Opencv 2 概述本文是一篇环境搭建的基础 ...
centos7 python3.7 ssl_centos6.8安装python3.7无法import _ssl的解决方法
公司运维提供的服务器是centos6.8,打算在上面装python3.7,结果费尽周折,按照网上的步骤python3.7能成功安装,但是import ssl却报找不到_ssl模块的错误: import ...
python下载哪一个安装包_python中正确安装对应版本的包
python在写机器学习的代码过程中,需要引入如numpy.matpoltlib.pandas等等等.有时候直接pip install+对应的包名并不能正确安装,或者安装后依旧会出现安装不完全的情况. ...
Ubuntu14.04 64位+Python3.4环境下安装matplotlib的方法
问题: 具体的问题是这样的: 我的系统是Ubuntu14.04 的64位系统,python3.4版本下,想使用matplotlib来做图. 由于matplotlib依赖numpy和python的图像库 ...
SoX 安装（Ubuntu+win10）的新手误区和正确安装方法。
转载请声明出处! 1.绪论 SoX - Sound eXchange 国外开源音频处理软件,官网地址:http://sox.sourceforge.net/Main/HomePage. Welcome ...
我的AI之路(5)--如何选择和正确安装跟Tensorflow版本对应的CUDA和cuDNN版本
最新的Tensorflow和CUDA cuDNN的对应关系可以从这里找到: https://tensorflow.google.cn/install/source https://tensorflow ...
windows10+python3.5+CUDA10.0 安装pytorch教程
安装环境准备: 1.首先你需要安装Anaconda: https://www.anaconda.com/ 需要注意Anaconda自带的python版本.我安装的Anaconda自带的是python3 ...
试图运行项目时出错，无法启动调试。没有正确安装调试器，请运行安装程序安装或恢复调试器。...
用Visual Studio.net 2003调试项目时,出现错误对话框,显示如下: 试图运行项目时出错,无法启动调试.没有正确安装调试器,请运行安装程序安装或恢复调试 ...
配置发布和禁用复制功能时提示分发服务器未正确安装。
错误提示(配置发布和禁用复制功能时提示分发服务器未正确安装.): 1.无法为本地服务器找到分发服务器或分发数据库.可能未安装分发服务器,也可能在分发服务器上未将本地服务器配置为发布服务器. 2.SQ ...
flashpaper打印机没有被正确安装_没有正确保存与安装，可导致80%的轴承提早失效...
轴承损坏可谓司空见惯,可您是否知道,80%的轴承提早失效是因为没有正确地安装.轴承的正确安装,不仅可以增加轴承的使用寿命,降低成本,还可以大大提高生产效益. 没有正确保存与安装,可导致80%的轴承提早 ...

python3.8如何正确安装使用ExcelLibrary

python3.8如何正确安装使用ExcelLibrary

前因

新的改变

卸载excelLibrary

采用同样的办法，安装ride

关键字

如何使用excelLibrary，官方示例

注意事项

官方文档

python3.8如何正确安装使用ExcelLibrary相关推荐

最新文章

热门文章