python3最新版本-mac下安装Python3.*(最新版本)

前言：mac系统自带python，不过以当前mac系统的最新版本为例，自带的python版本都是2.*版本，虽然不影响老版本项目的运行，但是python最新的3.*版本的一些语法与2.*版本并不相同，网上的教程大神们也肯定都更新出了最新版的教程，我们不论是学习还是使用，当然用最新版会更好一点。

1、在安装最新版Python3.*之前，我们先熟悉一下系统自带的python。

Mac系统自带python路径为／System／Library／Frameworks／Python.framework/Version,我们先来打开目录看一下：

open /System/Library/Frameworks/Python.framework/Versions

我们看到这里有多个python版本，而在Current目录下存放的是系统当前的python版本。

mac既然自带了python，当然肯定配置好了python的全局命令，我们直接在终端运行：

python

运行正常。到这里也差不多对mac系统自带的python有所了解，接下来我们开始安装最新版本的python。

2、开始安装(这里我们使用神器homebrew，还不熟悉此神器的小伙伴请自行百度，也可点击链接直接前往下载)

安装前先搜索一下是否已经存在python3的包：

brew search python3

已经存在，我们可以直接安装了：

brew install python3

==>Auto-updated Homebrew!

Updated 1 tap (homebrew/core).

==>Updated Formulae

angular-cli fluent-bitlinks postgresql@9.6texmath

byacc fnmlt qcachegrind tile38

caddy ipython osrm-backendrhino wtf

cfitsio ipython@5 postgresqlsiril

cfssl libpq postgresql@9.4sundials

dnscrypt-proxylibpqxx postgresql@9.5synfig

==>Installing dependencies for python:sphinx-doc,gdbm,openssl,sqlite,xz

==>Installing python dependency:sphinx-doc

==>Downloading https://homebrew.bintray.com/bottles/sphinx-doc-1.7.4.high_sierr

######################################################################## 100.0%

==>Pouring sphinx-doc-1.7.4.high_sierra.bottle.tar.gz

==>Caveats

This formula is keg-only, which means it was not symlinked into /usr/local,

because this formula is mainly used internally by other formulae.

Users are advised to use `pip` to install sphinx-doc.

If you need to have this software first in your PATH run:

echo 'export PATH="/usr/local/opt/sphinx-doc/bin:$PATH"' >> ~/.bash_profile

==>Summary

�/usr/local/Cellar/sphinx-doc/1.7.4: 2,642 files, 36.8MB

==>Installing python dependency:gdbm

==>Downloading https://homebrew.bintray.com/bottles/gdbm-1.14.1_1.high_sierra.b

######################################################################## 100.0%

==>Pouring gdbm-1.14.1_1.high_sierra.bottle.tar.gz

�/usr/local/Cellar/gdbm/1.14.1_1: 20 files, 555.7KB

==>Installing python dependency:openssl

==>Downloading https://homebrew.bintray.com/bottles/openssl-1.0.2o_1.high_sierr

######################################################################## 100.0%

==>Pouring openssl-1.0.2o_1.high_sierra.bottle.tar.gz

==>Caveats

A CA file has been bootstrapped using certificates from the SystemRoots

keychain. To add additional certificates (e.g. the certificates added in

the System keychain), place .pem files in

/usr/local/etc/openssl/certs

and run

/usr/local/opt/openssl/bin/c_rehash

This formula is keg-only, which means it was not symlinked into /usr/local,

because Apple has deprecated use of OpenSSL in favor of its own TLS and crypto libraries.

If you need to have this software first in your PATH run:

echo 'export PATH="/usr/local/opt/openssl/bin:$PATH"' >> ~/.bash_profile

For compilers to find this software you may need to set:

LDFLAGS:-L/usr/local/opt/openssl/lib

CPPFLAGS: -I/usr/local/opt/openssl/include

For pkg-config to find this software you may need to set:

PKG_CONFIG_PATH: /usr/local/opt/openssl/lib/pkgconfig

==>Summary

�/usr/local/Cellar/openssl/1.0.2o_1: 1,791 files, 12.3MB

==>Installing python dependency:sqlite

==>Downloading https://homebrew.bintray.com/bottles/sqlite-3.23.1.high_sierra.b

######################################################################## 100.0%

==>Pouring sqlite-3.23.1.high_sierra.bottle.tar.gz

==>Caveats

This formula is keg-only, which means it was not symlinked into /usr/local,

because macOS provides an older sqlite3.

If you need to have this software first in your PATH run:

echo 'export PATH="/usr/local/opt/sqlite/bin:$PATH"' >> ~/.bash_profile

For compilers to find this software you may need to set:

LDFLAGS:-L/usr/local/opt/sqlite/lib

CPPFLAGS: -I/usr/local/opt/sqlite/include

For pkg-config to find this software you may need to set:

PKG_CONFIG_PATH: /usr/local/opt/sqlite/lib/pkgconfig

==>Summary

�/usr/local/Cellar/sqlite/3.23.1: 11 files, 3MB

==>Installing python dependency:xz

==>Downloading https://homebrew.bintray.com/bottles/xz-5.2.4.high_sierra.bottle

######################################################################## 100.0%

==>Pouring xz-5.2.4.high_sierra.bottle.tar.gz

�/usr/local/Cellar/xz/5.2.4: 92 files, 1MB

==>Installingpython

Warning:Building python from source:

The bottle needs the Apple Command Line Tools to be installed.

You can install them, if desired, with:

xcode-select --install

==>Downloading https://www.python.org/ftp/python/3.6.5/Python-3.6.5.tar.xz

######################################################################## 100.0%

==>./configure --prefix=/usr/local/Cellar/python/3.6.5 --enable-ipv6 --dataroot

==>make

==>make install PYTHONAPPSDIR=/usr/local/Cellar/python/3.6.5

==>make frameworkinstallextras PYTHONAPPSDIR=/usr/local/Cellar/python/3.6.5/sha

==>Downloading https://files.pythonhosted.org/packages/72/c2/c09362ab29338413ab

######################################################################## 100.0%

==>Downloading https://files.pythonhosted.org/packages/ae/e8/2340d46ecadb1692a1

######################################################################## 100.0%

==>Downloading https://files.pythonhosted.org/packages/5d/c1/45947333669b31bc6b

######################################################################## 100.0%

==>make html

Error:An unexpected error occurred during the `brew link` step

The formula built, but is not symlinked into /usr/local

Permission denied @ dir_s_mkdir - /usr/local/Frameworks

Error:Permission denied @ dir_s_mkdir - /usr/local/Frameworks

所有的包都下载完毕，但是我们却发现最后报了两条错误，大概意思是公式已经建立，但是在创建连接的时候因为没有权限而发生意外错误。在报错信息里我们看到一个目录/usr/local/Frameworks，我们先去找一下这个目录：

open /usr/local/Frameworks

发现这个目录竟然不存在，那我们就来手动创建一个：

sudo mkdir /usr/local/Frameworks

创建好目录之后，再来解决权限问题：

sudo chown $(whoami):admin /usr/local/Frameworks

不报错即为修改成功，修改好权限之后，还需要手动执行一下安装时未完成的创建连接：

brew link python3

连接成功。咱们来查看一下当前系统下的python3的信息：

brew info python3

发现python3被安装到了/usr/local/bin/python3目录下，有兴趣的小伙伴自行前往查看想过配置文件。

到这里python3的安装就算完成了，不过可能有小伙伴已经发现，不管是在终端运行python -V查看版本号还是直接运行python启动python命令行模式，默认的python版本还是系统自带的2.*版本。其实这时候只运行命令时需要把python改为python3就行了，当然，有兴趣的小伙伴也可以尝试配置一下默认版本，把当前系统的默认版本修改为3.*版本。知乎上已经贴出了各种各样的方法，我这里就不多做赘述了。

python3最新版本-mac下安装Python3.*(最新版本)相关推荐

mac下安装python3
mac下安装python3 1.先用brew search命令查看 brew search python3 结果如下所示: ==> Formulae boost-python3 python3 ...
Mac下安装多个版本的JDK并随意切换
最近在学习JDK9的一些新特性,但是日常使用基本上都是基于JDK8,因此,需要在Mac环境下安装多个版本的JDK,并且确保能够随意切换. JDK9下载 JDK9下载地址:https://www.ora ...
linux下安装python3出现无configure_Linux下安装Python3.9.0
Linux下安装Python3.9.0 安装依赖环境 yum -y install zlib-devel bzip2-devel openssl-devel ncurses-devel sqlite- ...
wamp+多版本mysql_WampServer下安装多个版本的PHP、mysql、apache图文教程，_PHP教程
WampServer下安装多个版本的PHP.mysql.apache图文教程, 今天,我在调试一套PHP程序的时候,该程序中使用的某些函数在低版本中无法使用,所以只能在搞个高版本的php. 作为Web ...
怎么安装python3.6.2_centos7.2下安装python3.6.2
centos7.2默认已经安装了python2.7.5,因此要安装python3.6的话,得从python官网上下载相应版本的安装包查看python2.7 1.下载:wget https://www ...
linux python3安装包_Linux下安装python3及相关包
Python3: sudo apt-get install python3 终端中输入python则进入python2,输入python3则进入python3 安装python2的相关包: sudo ...
ubuntu怎么安装python3操作系统32_ubuntu系统下安装python3
本人这里使用的是ubuntu12.04LTS系统.所以对应不同ubuntu的版本,应该也差不多. 系统默认带python2.7.3,现在因为python已经更新到python3.所以下载了个pytho ...
macos安装低版本php,mac下安装多个版本PHP及切换
mac电脑原来安装的是php 5.6.29 现在再安装两个版本.php 5.6.32 php 7.0.27 本文的原理就是用一个php管理工具(php-version)管理切换两个php. 首先要先安 ...
centos安装python3.8.1_centos6.6下安装python3.8.1后报错？
我的系统版本是:[root@localhost ~]# rpm -q centos-release centos-release-6-6.el6.centos.12.2.x86_64 按照标准步骤./ ...

python3最新版本-mac下安装Python3.*(最新版本)

python3最新版本-mac下安装Python3.*(最新版本)相关推荐

最新文章

热门文章