本文博客地址：http://blog.csdn.net/qq1084283172/article/details/54562606

网上关于编译Android源码的教程已经很多了，但是讲怎么编译Android源码刷到真机上的教程不是很多并且也没有讲清楚，仅仅编译Android源码不部署到真机上折腾一下是不愉快的。在Android安全学习的过程不免涉及到修改Android源码过各种对抗的事情，今天有空来学习一下如何编译Android源码部署到谷歌的Nexus 5 手机上，以Android 4.4.4 r1的源码为例子，在Ubuntu 14.04.5版本系统上编译Android 4.4.4 r1 的镜像文件刷到Nexus 5手机上。

一、获取Android源码对应的驱动设备

1.）从谷歌网址 https://source.android.com/source/build-numbers.html  知道 Android 4.4.4 r1 源码编译成功后的镜像文件的编号为 KTU84P。

2.）通过获取到的Android 4.4.4 r1源码的编号 KTU84P ，在谷歌网址 https://developers.google.com/android/drivers  上，查询到编号 KTU84P 对应的Nexus 5设备刷机需要的驱动设备文件的下载地址  https://developers.google.com/android/drivers#hammerheadktu84p 。

Nexus 5 (GSM/LTE) binaries for Android 4.4.4 (KTU84P)

通过上面的下载链接下载到编号 KTU84P 对应的Nexus 5的驱动文件 broadcom-hammerhead-ktu84p-5a5bf60e.tgz、lge-hammerhead-ktu84p-49419c39.tgz、qcom-hammerhead-ktu84p-f159eadf.tgz，将这3个文件解压到Android 4.4.4 r1源码的根目录下，其实该怎么使用这些驱动文件，在谷歌官方网址 https://source.android.com/source/building.html 中已经提到并说的很清楚了。

Obtain proprietary binaries

AOSP cannot be used from pure source code only and requires additional hardware-related proprietary libraries to run, such as for hardware graphics acceleration. See the sections below for download links and Device binaries requirements for additional resources.

Download proprietary binaries

You can download official binaries for the supported devices running tagged AOSP release branches from Google's Nexus driver page. These binaries add access to additional hardware capabilities with non-open source code. To instead build the AOSP master branch, use the Binaries Preview for Nexus Devices. When building the master branch for a device, use the binaries for themost recent numbered release or with the most recent date.

Extract proprietary binaries

Each set of binaries comes as aself-extracting script in a compressed archive.Uncompress each archive,run the included self-extracting script from the root of the source tree, thenconfirm that you agree to the terms of the enclosed license agreement.The binaries and their matching makefiles will be installed in the vendor/ hierarchy of the source tree

3.）解压下载的驱动文件 broadcom-hammerhead-ktu84p-5a5bf60e.tgz、lge-hammerhead-ktu84p-49419c39.tgz、qcom-hammerhead-ktu84p-f159eadf.tgz 到Android 4.4.4 r1源码的根目录下得到3个.sh的脚本文件。

4.）先 sudo chmod u+x 赋予3个脚本以可执行权限，然后执行3个脚本文件；在脚本的执行过程中需要同意相关的协议，按照执行的提示在协议的结束位置输入 I ACCEPT 即可完成脚本的运行。

5.）3个驱动相关的脚本文件执行解压缩成功，会在Android 4.4.4 r1源码的根目录下创建 vendor 文件，将编译需要的驱动文件释放到 vendor 文件中。

驱动文件释放成功以后的截图：

二、Android源码的编译

1.）关于Android源码编译环境的配置，可以参考谷歌官方的链接：https://source.android.com/source/initializing.html 和 https://source.android.com/source/requirements.html 进行操作也可以参考前面的博客 ubuntu 14.04.5 编译Android 4.4.4 r1源码（最新） 的步骤进行Android源码编译环境的配置也可以参考其他大牛的博客。不想走弯路，最好还是按照google官方的说明文档来进行配置操作。

2.）Android 4.4.4 r1源码的编译步骤按照google官方的操作来

Android源码编译的步骤可以参考谷歌官方的文档：https://source.android.com/source/building.html 。

Clean up

To ensure the newly installed binaries are properly taken into account after being extracted, delete the existing output of any previous build using:

$ make clobber

注意：这一步一定要，否则在后面的源码编译中就会掉坑里爬不起来；具体的错误，后面我会单独拿出来说。

Set up environment

Initialize the environment with the envsetup.sh script. Note that replacing source with . (a single dot) saves a few characters, and the short form is more commonly used in documentation.

$ source build/envsetup.sh

or

$ . build/envsetup.sh

Choose a target

Choose which target to build with lunch. The exact configuration can be passed as an argument. For example, the following command:

$ lunch aosp_arm-eng

refers to a complete buildfor the emulator, with all debugging enabled.

If run with no arguments lunch will prompt you to choose a target from the menu.

All build targets take the form BUILD-BUILDTYPE, where the BUILD isa codename referring to the particular feature combination.

The BUILDTYPE is one of the following:

For more information about building for and running on actual hardware, see Running Builds.

基于Nexus 5手机的机型考虑，lunch 9 选择 编译类型为 aosp_hammerhead-userdebug ，为什么选择该编译类型呢？可以参考google官方文档 https://source.android.com/source/running.html 给出的说明。

Selecting a device build

The recommended builds for devices are available from the lunch menu, accessed when running the lunch command with no arguments. You can download factory images and binaries for Nexus devices from developers.google.com:

• Preview binaries (blobs)
• Factory images for released devices
• Support binaries (drivers) for release devices

See Obtaining proprietary binaries for more details and Device binaries requirements for other resources.

Note: Do not use Android 4.1.1 on a Nexus 7 originally sold with Android 4.1.2 or newer.

选择 Android 4.4.4 r1 源码编译的类型为 aosp_hammerhead-userdebug。

执行下面的命令编译Android 4.4.4 r1 的源码.

Build the code

Please note, this section is merely a summary to ensure setup is complete. See Running Builds for detailed instructions on building Android.

Build everything with make.GNU make can handle parallel tasks with a -jN argument, and it's common to use a number of tasks N that's between 1 and 2times the number of hardware threads on the computer being used for the build. For example, on a dual-E5520 machine (2 CPUs, 4 cores per CPU, 2 threads per core), the fastest builds are made with commands between make -j16 and make -j32.

$ make -j4

3.）Android 4.4.4 r1源码编译中遇到的坑 /LINKED/libwebviewchromium.so 错误

out/target/product/hammerhead/obj/STATIC_LIBRARIES/third_party_WebKit_Source_core_webcore_remaining_gyp_intermediates/third_party_WebKit_Source_core_webcore_remaining_gyp.a(SinkDocument.o):SinkDocument.cpp:function vtable for WebCore::SinkDocument: error: undefined reference to 'non-virtual thunk to WebCore::Document::virtualCompleteURL(WTF::String const&) const'
out/target/product/hammerhead/obj/STATIC_LIBRARIES/third_party_WebKit_Source_core_webcore_remaining_gyp_intermediates/third_party_WebKit_Source_core_webcore_remaining_gyp.a(SinkDocument.o):SinkDocument.cpp:function vtable for WebCore::SinkDocument: error: undefined reference to 'non-virtual thunk to WebCore::Document::addMessage(WebCore::MessageSource, WebCore::MessageLevel, WTF::String const&, WTF::String const&, unsigned int, WebCore::ScriptState*)'
out/target/product/hammerhead/obj/STATIC_LIBRARIES/third_party_WebKit_Source_core_webcore_remaining_gyp_intermediates/third_party_WebKit_Source_core_webcore_remaining_gyp.a(SinkDocument.o):SinkDocument.cpp:function vtable for WebCore::SinkDocument: error: undefined reference to 'non-virtual thunk to WebCore::Document::reportBlockedScriptExecutionToInspector(WTF::String const&)'
out/target/product/hammerhead/obj/STATIC_LIBRARIES/third_party_WebKit_Source_core_webcore_remaining_gyp_intermediates/third_party_WebKit_Source_core_webcore_remaining_gyp.a(SinkDocument.o):SinkDocument.cpp:function vtable for WebCore::SinkDocument: error: undefined reference to 'non-virtual thunk to WebCore::Document::errorEventTarget()'
out/target/product/hammerhead/obj/STATIC_LIBRARIES/third_party_WebKit_Source_core_webcore_remaining_gyp_intermediates/third_party_WebKit_Source_core_webcore_remaining_gyp.a(SinkDocument.o):SinkDocument.cpp:function vtable for WebCore::SinkDocument: error: undefined reference to 'non-virtual thunk to WebCore::Document::logExceptionToConsole(WTF::String const&, WTF::String const&, int, int, WTF::PassRefPtr<WebCore::ScriptCallStack>)'
out/target/product/hammerhead/obj/STATIC_LIBRARIES/third_party_WebKit_Source_core_webcore_remaining_gyp_intermediates/third_party_WebKit_Source_core_webcore_remaining_gyp.a(SinkDocument.o):SinkDocument.cpp:function vtable for WebCore::SinkDocument: error: undefined reference to 'non-virtual thunk to WebCore::Document::timerAlignmentInterval() const'
out/target/product/hammerhead/obj/STATIC_LIBRARIES/third_party_WebKit_Source_core_webcore_remaining_gyp_intermediates/third_party_WebKit_Source_core_webcore_remaining_gyp.a(SinkDocument.o):SinkDocument.cpp:function vtable for WebCore::SinkDocument: error: undefined reference to 'non-virtual thunk to WebCore::Document::didUpdateSecurityOrigin()'
out/target/product/hammerhead/obj/STATIC_LIBRARIES/third_party_WebKit_Source_core_webcore_remaining_gyp_intermediates/third_party_WebKit_Source_core_webcore_remaining_gyp.a(SinkDocument.o):SinkDocument.cpp:function vtable for WebCore::SinkDocument: error: undefined reference to 'non-virtual thunk to WebCore::Document::tasksWereSuspended()'
out/target/product/hammerhead/obj/STATIC_LIBRARIES/third_party_WebKit_Source_core_webcore_remaining_gyp_intermediates/third_party_WebKit_Source_core_webcore_remaining_gyp.a(SinkDocument.o):SinkDocument.cpp:function vtable for WebCore::SinkDocument: error: undefined reference to 'non-virtual thunk to WebCore::Document::tasksWereResumed()'
out/target/product/hammerhead/obj/STATIC_LIBRARIES/third_party_WebKit_Source_core_webcore_remaining_gyp_intermediates/third_party_WebKit_Source_core_webcore_remaining_gyp.a(SinkDocument.o):SinkDocument.cpp:function vtable for WebCore::SinkDocument: error: undefined reference to 'non-virtual thunk to WebCore::Document::isContextThread() const'
external/chromium_org/third_party/WebKit/Source/bindings/v8/ScriptWrappable.h:43: error: undefined reference to 'webCoreInitializeScriptWrappableForInterface(WebCore::DedicatedWorkerGlobalScope*)'
external/chromium_org/third_party/WebKit/Source/core/svg/SVGDocument.h:31: error: undefined reference to 'WebCore::Document::~Document()'
external/chromium_org/third_party/WebKit/Source/core/svg/SVGDocument.cpp:38: error: undefined reference to 'WebCore::Document::Document(WebCore::DocumentInit const&, unsigned char)'
external/chromium_org/third_party/WebKit/Source/bindings/v8/ScriptWrappable.h:43: error: undefined reference to 'webCoreInitializeScriptWrappableForInterface(WebCore::SVGDocument*)'
out/target/product/hammerhead/obj/STATIC_LIBRARIES/third_party_WebKit_Source_core_webcore_svg_gyp_intermediates/third_party_WebKit_Source_core_webcore_svg_gyp.a(SVGDocument.o):SVGDocument.cpp:function vtable for WebCore::SVGDocument: error: undefined reference to 'WebCore::Document::createParser()'
external/chromium_org/third_party/WebKit/Source/bindings/v8/ScriptPromiseResolver.h:92: error: undefined reference to 'v8::Handle<v8::Value> WebCore::toV8NoInline<WebCore::ImageBitmap>(WebCore::ImageBitmap*, v8::Handle<v8::Object>, v8::Isolate*)'
host C++: zip_archive_test <= art/runtime/common_test.cc
collect2: error: ld returned 1 exit status
make: *** [out/target/product/hammerhead/obj/SHARED_LIBRARIES/libwebviewchromium_intermediates/LINKED/libwebviewchromium.so] Error 1
make: *** Waiting for unfinished jobs....
androidcode@ubuntu:~/AndroidDevlop/android-4.4

错误截图如下：

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

google查了一下发现网上也有人遇到了这个错误，但是都没给出好的解决方法 ，具体的讨论如下：

<1>  有网友讲是Android源码编译的过程运行内存不够的原因，需要设置ubuntu系统的运行内存和物理内存的交换缓冲。

错误1

PRODUCT_COPY_FILES device/generic/goldfish/data/etc/apns-conf.xml:system/etc/apns-conf.xml ignored.
target SharedLib: libwebviewchromium (out/target/product/hammerhead/obj/SHARED_LIBRARIES/libwebviewchromium_intermediates/LINKED/libwebviewchromium.so)
collect2: error: ld terminated with signal 9 [Killed]
make: *** [out/target/product/hammerhead/obj/SHARED_LIBRARIES/libwebviewchromium_intermediates/LINKED/libwebviewchromium.so] エラー 1

解决办法

sudo dd if=/dev/zero of=/var/swapfile bs=1M count=2048
sudo chmod 600 /var/swapfile
sudo mkswap /var/swapfile
echo /var/swapfile none swap defaults 0 0 | sudo tee -a /etc/fstab
sudo swapon -a# 此方法对上面我提到的错误无效，和上面我提到的错误根本就不是一回事，忽略
# 参考链接：http://none53.hatenablog.com/entry/20131128/1385601681

错误2

build/core/shared_library_internal.mk:68 recipe for target 'out/target/product/generic/obj/SHARED_LIBRARIES/libwebviewchromium_intermediates/LINKED/libwebviewchromium.so' failedmake: ** [out/target/product/generic/obj/SHARED_LIBRARIES/libwebviewchromium_intermediates/LINKED/libwebviewchromium.so] Error 1make: ** Deleting file 'out/target/product/generic/obj/SHARED_LIBRARIES/libwebviewchromium_intermediates/

解决办法

设置两个swap文件，每个swap的大小都设置为1G，使用了下面的命令：
1.sudo dd if=/dev/zero of=/opt/swap1 bs=1024 count=1024000(count的值等于1024 x 你想要的文件大小, 4096000是4G，1024000是1G)
2.sudo mkswap /opt/swap1(把这个文件变成swap文件)
3.sudo swapon /opt/swap1(启用这个swap文件)
4.为了使每次开机时都能正常使用swap文件，所以这里需要把swap文件增加到fstab文件中sudo gedit /etc/fstab在最后一行增加如下内容/opt/swap1 swap swap defaults 0 0
重复上述4步，再次增加一个/opt/swap2的文件。# 参考链接：http://jileniao.net/ubunt-add-swap-to-build-libwebviewchromium.html
# 参考链接：http://www.cnblogs.com/ksmile/p/4596036.html
# 参考链接：http://blog.csdn.net/fantasy_wxe/article/details/18000159# 说明：还没能解决我的问题，忽略

<2> chromium-os项目组一位开发者也遇到了类似的问题

参考链接：https://groups.google.com/a/chromium.org/forum/#!topic/chromium-os-discuss/tGeRjAI1x6s

c/Release/obj.target/third_party/WebKit/Source/core/core.gyp/libwebcore_remaining.a(c/Release/obj.target/third_party/WebKit/Source/core/core.gyp/../../../../../webcore_remaining/third_party/WebKit/Source/core/workers/Worker.o):Worker.cpp:function WebCore::Worker::notifyFinished(): error: undefined reference to 'WebCore::InspectorInstrumentation::scriptImportedImpl(WebCore::InstrumentingAgents*, unsigned long, WTF::String const&)'
c/Release/obj.target/third_party/WebKit/Source/core/core.gyp/libwebcore_remaining.a(c/Release/obj.target/third_party/WebKit/Source/core/core.gyp/../../../../../webcore_remaining/third_party/WebKit/Source/core/workers/Worker.o):Worker.cpp:function WebCore::Worker::didReceiveResponse(unsigned long, WebCore::ResourceResponse const&): error: undefined reference to 'WebCore::InspectorInstrumentation::didReceiveScriptResponseImpl(WebCore::InstrumentingAgents*, unsigned long)'
collect2: error: ld returned 1 exit status
make: *** [c/Release/chrome] Error 1* ERROR: chromeos-base/chromeos-chrome-29.0.1517.0_rc-r2 failed (compile phase):*   emake failed* * If you need support, post the output of 'emerge --info =chromeos-base/chromeos-chrome-29.0.1517.0_rc-r2',* the complete build log and the output of 'emerge -pqv =chromeos-base/chromeos-chrome-29.0.1517.0_rc-r2'.* This ebuild is from an overlay named 'chromiumos': '/mnt/host/source/src/third_party/chromiumos-overlay/'* The complete build log is located at '/build/amd64-generic/tmp/portage/logs/chromeos-base:chromeos-chrome-29.0.1517.0_rc-r2:20130531-041701.log'.* The ebuild environment file is located at '/build/amd64-generic/tmp/portage/chromeos-base/chromeos-chrome-29.0.1517.0_rc-r2/temp/environment'.* S: '/build/amd64-generic/tmp/portage/chromeos-base/chromeos-chrome-29.0.1517.0_rc-r2/work/chromeos-chrome-29.0.1517.0_rc'

解决方法

iirc, the webkit->blink transition did not go as cleanly as hoped.  you should manually `rm -rf` the partial build dir and try again:sudo rm -rf /var/cache/chromeos-chrome/chrome-src/*-mike# 遗憾的是，对我遇到的问题仍然没有用

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

但是受到上面这个解决方法的启发，由于在拷贝驱动文件到Android 4.4.4 r1源码的根目录之前，我已经编译成功了一次Andriod源码，后面添加了驱动文件 vendor 以后，直接再次 make 编译源码，很有可能是前面编译生成的Android源码模块已经编译生成，再次编译的时候就不再编译了，导致驱动文件 vendor 没有很好的和驱动文件 vendor衔接起来，因此执行一次 make clobber 命令后再重新编译添加了驱动文件 vendor 的Android 4.4.4 r1的源码，编译成功。

make clobber

<3> Android 4.4.4 r1的源码编译成功

Export includes file: bootable/recovery/applypatch/Android.mk -- out/host/linux-x86/obj/EXECUTABLES/imgdiff_intermediates/export_includes
host Executable: imgdiff (out/host/linux-x86/obj/EXECUTABLES/imgdiff_intermediates/imgdiff)
Notice file: bootable/recovery/applypatch/NOTICE -- out/host/linux-x86/obj/NOTICE_FILES/src//bin/imgdiff.txt
Notice file: external/bzip2/NOTICE -- out/host/linux-x86/obj/NOTICE_FILES/src//lib/libbz.a.txt
Install: out/host/linux-x86/bin/imgdiff
Import includes file: out/host/linux-x86/obj/EXECUTABLES/bsdiff_intermediates/import_includes
host C: bsdiff <= external/bsdiff/bsdiff.c
external/bsdiff/bsdiff.c: In function 'main':
external/bsdiff/bsdiff.c:196:5: warning: 'pos' may be used uninitialized in this function [-Wmaybe-uninitialized]
Export includes file: external/bsdiff/Android.mk -- out/host/linux-x86/obj/EXECUTABLES/bsdiff_intermediates/export_includes
host Executable: bsdiff (out/host/linux-x86/obj/EXECUTABLES/bsdiff_intermediates/bsdiff)
Install: out/host/linux-x86/bin/bsdiff
Construct recovery from boot
mkdir -p out/target/product/hammerhead/obj/PACKAGING/recovery_patch_intermediates/
PATH=out/host/linux-x86/bin:$PATH out/host/linux-x86/bin/imgdiff out/target/product/hammerhead/boot.img out/target/product/hammerhead/recovery.img out/target/product/hammerhead/obj/PACKAGING/recovery_patch_intermediates/recovery_from_boot.p
failed to reconstruct target deflate chunk 1 [(null)]; treating as normal
chunk 0: type 0 start 0 len 8409098
chunk 1: type 2 start 8409098 len 900864
chunk 2: type 0 start 8908075 len 725
Construct patches for 3 chunks...
patch   0 is 204 bytes (of 8409098)
patch   1 is 445991 bytes (of 498977)
patch   2 is 186 bytes (of 725)
chunk   0: normal   (         0,    8409098)         204
chunk   1: deflate  (   8409098,    1096516)      445991  (null)
chunk   2: normal   (   9505614,       1202)         186
Install system fs image: out/target/product/hammerhead/system.img
out/target/product/hammerhead/system.img+out/target/product/hammerhead/obj/PACKAGING/recovery_patch_intermediates/recovery_from_boot.p maxsize=1096212480 blocksize=135168 total=298434837 reserve=11083776
Target userdata fs image: out/target/product/hammerhead/userdata.img
Running:  mkuserimg.sh -s out/target/product/hammerhead/data out/target/product/hammerhead/userdata.img ext4 data 13725837312 out/target/product/hammerhead/root/file_contexts
+ echo 'in mkuserimg.sh PATH=out/host/linux-x86/bin/:/home/androidcode/AndroidDevlop/jdk1.6.0_45/bin:/home/androidcode/AndroidDevlop/android-4.4.4_r1/out/host/linux-x86/bin:/home/androidcode/AndroidDevlop/android-4.4.4_r1/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7/bin:/home/androidcode/AndroidDevlop/android-4.4.4_r1/prebuilts/gcc/linux-x86/arm/arm-eabi-4.7/bin:/home/androidcode/AndroidDevlop/android-4.4.4_r1/prebuilts/gcc/linux-x86/mips/mipsel-linux-android-4.7/bin:/home/androidcode/AndroidDevlop/android-4.4.4_r1/development/emulator/qtools:/home/androidcode/AndroidDevlop/android-4.4.4_r1/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7/bin:/home/androidcode/AndroidDevlop/android-4.4.4_r1/prebuilts/gcc/linux-x86/arm/arm-eabi-4.7/bin:/home/androidcode/AndroidDevlop/android-4.4.4_r1/development/scripts:/home/androidcode/AndroidDevlop/android-4.4.4_r1/prebuilts/devtools/tools:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/androidcode/AndroidDevlop/jdk1.6.0_45/bin:/home/androidcode/AndroidDevlop/adt-bundle-linux-x86_64-20140702/sdk/platform-tools:/home/androidcode/AndroidDevlop/adt-bundle-linux-x86_64-20140702/sdk/tools:/home/androidcode/AndroidDevlop/android-ndk-r10d'
in mkuserimg.sh PATH=out/host/linux-x86/bin/:/home/androidcode/AndroidDevlop/jdk1.6.0_45/bin:/home/androidcode/AndroidDevlop/android-4.4.4_r1/out/host/linux-x86/bin:/home/androidcode/AndroidDevlop/android-4.4.4_r1/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7/bin:/home/androidcode/AndroidDevlop/android-4.4.4_r1/prebuilts/gcc/linux-x86/arm/arm-eabi-4.7/bin:/home/androidcode/AndroidDevlop/android-4.4.4_r1/prebuilts/gcc/linux-x86/mips/mipsel-linux-android-4.7/bin:/home/androidcode/AndroidDevlop/android-4.4.4_r1/development/emulator/qtools:/home/androidcode/AndroidDevlop/android-4.4.4_r1/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7/bin:/home/androidcode/AndroidDevlop/android-4.4.4_r1/prebuilts/gcc/linux-x86/arm/arm-eabi-4.7/bin:/home/androidcode/AndroidDevlop/android-4.4.4_r1/development/scripts:/home/androidcode/AndroidDevlop/android-4.4.4_r1/prebuilts/devtools/tools:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/androidcode/AndroidDevlop/jdk1.6.0_45/bin:/home/androidcode/AndroidDevlop/adt-bundle-linux-x86_64-20140702/sdk/platform-tools:/home/androidcode/AndroidDevlop/adt-bundle-linux-x86_64-20140702/sdk/tools:/home/androidcode/AndroidDevlop/android-ndk-r10d
+ ENABLE_SPARSE_IMAGE=
+ '[' -s = -s ']'
+ ENABLE_SPARSE_IMAGE=-s
+ shift
+ '[' 6 -ne 5 -a 6 -ne 6 ']'
+ SRC_DIR=out/target/product/hammerhead/data
+ '[' '!' -d out/target/product/hammerhead/data ']'
+ OUTPUT_FILE=out/target/product/hammerhead/userdata.img
+ EXT_VARIANT=ext4
+ MOUNT_POINT=data
+ SIZE=13725837312
+ FC=out/target/product/hammerhead/root/file_contexts
+ case $EXT_VARIANT in
+ '[' -z data ']'
+ '[' -z 13725837312 ']'
+ '[' -n out/target/product/hammerhead/root/file_contexts ']'
+ FCOPT='-S out/target/product/hammerhead/root/file_contexts'
+ MAKE_EXT4FS_CMD='make_ext4fs -s -S out/target/product/hammerhead/root/file_contexts -l 13725837312 -a data out/target/product/hammerhead/userdata.img out/target/product/hammerhead/data'
+ echo make_ext4fs -s -S out/target/product/hammerhead/root/file_contexts -l 13725837312 -a data out/target/product/hammerhead/userdata.img out/target/product/hammerhead/data
make_ext4fs -s -S out/target/product/hammerhead/root/file_contexts -l 13725837312 -a data out/target/product/hammerhead/userdata.img out/target/product/hammerhead/data
+ make_ext4fs -s -S out/target/product/hammerhead/root/file_contexts -l 13725837312 -a data out/target/product/hammerhead/userdata.img out/target/product/hammerhead/data
Creating filesystem with parameters:Size: 13725835264Block size: 4096Blocks per group: 32768Inodes per group: 8144Inode size: 256Journal blocks: 32768Label: Blocks: 3351034Block groups: 103Reserved block group size: 823
Created filesystem with 11/838832 inodes and 93654/3351034 blocks
+ '[' 0 -ne 0 ']'
out/target/product/hammerhead/userdata.img maxsize=14013113664 blocksize=135168 total=140614516 reserve=141656064
Target cache fs image: out/target/product/hammerhead/cache.img
Running:  mkuserimg.sh -s out/target/product/hammerhead/cache out/target/product/hammerhead/cache.img ext4 cache 734003200 out/target/product/hammerhead/root/file_contexts
+ echo 'in mkuserimg.sh PATH=out/host/linux-x86/bin/:/home/androidcode/AndroidDevlop/jdk1.6.0_45/bin:/home/androidcode/AndroidDevlop/android-4.4.4_r1/out/host/linux-x86/bin:/home/androidcode/AndroidDevlop/android-4.4.4_r1/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7/bin:/home/androidcode/AndroidDevlop/android-4.4.4_r1/prebuilts/gcc/linux-x86/arm/arm-eabi-4.7/bin:/home/androidcode/AndroidDevlop/android-4.4.4_r1/prebuilts/gcc/linux-x86/mips/mipsel-linux-android-4.7/bin:/home/androidcode/AndroidDevlop/android-4.4.4_r1/development/emulator/qtools:/home/androidcode/AndroidDevlop/android-4.4.4_r1/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7/bin:/home/androidcode/AndroidDevlop/android-4.4.4_r1/prebuilts/gcc/linux-x86/arm/arm-eabi-4.7/bin:/home/androidcode/AndroidDevlop/android-4.4.4_r1/development/scripts:/home/androidcode/AndroidDevlop/android-4.4.4_r1/prebuilts/devtools/tools:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/androidcode/AndroidDevlop/jdk1.6.0_45/bin:/home/androidcode/AndroidDevlop/adt-bundle-linux-x86_64-20140702/sdk/platform-tools:/home/androidcode/AndroidDevlop/adt-bundle-linux-x86_64-20140702/sdk/tools:/home/androidcode/AndroidDevlop/android-ndk-r10d'
in mkuserimg.sh PATH=out/host/linux-x86/bin/:/home/androidcode/AndroidDevlop/jdk1.6.0_45/bin:/home/androidcode/AndroidDevlop/android-4.4.4_r1/out/host/linux-x86/bin:/home/androidcode/AndroidDevlop/android-4.4.4_r1/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7/bin:/home/androidcode/AndroidDevlop/android-4.4.4_r1/prebuilts/gcc/linux-x86/arm/arm-eabi-4.7/bin:/home/androidcode/AndroidDevlop/android-4.4.4_r1/prebuilts/gcc/linux-x86/mips/mipsel-linux-android-4.7/bin:/home/androidcode/AndroidDevlop/android-4.4.4_r1/development/emulator/qtools:/home/androidcode/AndroidDevlop/android-4.4.4_r1/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.7/bin:/home/androidcode/AndroidDevlop/android-4.4.4_r1/prebuilts/gcc/linux-x86/arm/arm-eabi-4.7/bin:/home/androidcode/AndroidDevlop/android-4.4.4_r1/development/scripts:/home/androidcode/AndroidDevlop/android-4.4.4_r1/prebuilts/devtools/tools:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/androidcode/AndroidDevlop/jdk1.6.0_45/bin:/home/androidcode/AndroidDevlop/adt-bundle-linux-x86_64-20140702/sdk/platform-tools:/home/androidcode/AndroidDevlop/adt-bundle-linux-x86_64-20140702/sdk/tools:/home/androidcode/AndroidDevlop/android-ndk-r10d
+ ENABLE_SPARSE_IMAGE=
+ '[' -s = -s ']'
+ ENABLE_SPARSE_IMAGE=-s
+ shift
+ '[' 6 -ne 5 -a 6 -ne 6 ']'
+ SRC_DIR=out/target/product/hammerhead/cache
+ '[' '!' -d out/target/product/hammerhead/cache ']'
+ OUTPUT_FILE=out/target/product/hammerhead/cache.img
+ EXT_VARIANT=ext4
+ MOUNT_POINT=cache
+ SIZE=734003200
+ FC=out/target/product/hammerhead/root/file_contexts
+ case $EXT_VARIANT in
+ '[' -z cache ']'
+ '[' -z 734003200 ']'
+ '[' -n out/target/product/hammerhead/root/file_contexts ']'
+ FCOPT='-S out/target/product/hammerhead/root/file_contexts'
+ MAKE_EXT4FS_CMD='make_ext4fs -s -S out/target/product/hammerhead/root/file_contexts -l 734003200 -a cache out/target/product/hammerhead/cache.img out/target/product/hammerhead/cache'
+ echo make_ext4fs -s -S out/target/product/hammerhead/root/file_contexts -l 734003200 -a cache out/target/product/hammerhead/cache.img out/target/product/hammerhead/cache
make_ext4fs -s -S out/target/product/hammerhead/root/file_contexts -l 734003200 -a cache out/target/product/hammerhead/cache.img out/target/product/hammerhead/cache
+ make_ext4fs -s -S out/target/product/hammerhead/root/file_contexts -l 734003200 -a cache out/target/product/hammerhead/cache.img out/target/product/hammerhead/cache
Creating filesystem with parameters:Size: 734003200Block size: 4096Blocks per group: 32768Inodes per group: 7472Inode size: 256Journal blocks: 2800Label: Blocks: 179200Block groups: 6Reserved block group size: 47
Created filesystem with 11/44832 inodes and 5813/179200 blocks
+ '[' 0 -ne 0 ']'
out/target/product/hammerhead/cache.img maxsize=749371392 blocksize=135168 total=13668728 reserve=7569408

源码编译成功的截图

<4> Android 4.4.4 r1的源码编译成功后产生的刷机文件

<5> 有关Android 4.4.4 r1的源码编译成功后产生的刷机文件的相关的说明

Build 结果的目录结构

所有的编译产物都将位于 /out 目录下，该目录下主要有以下几个子目录：

• /out/host/：该目录下包含了针对主机的 Android 开发工具的产物。即 SDK 中的各种工具，例如：emulator，adb，aapt 等。
• /out/target/common/：该目录下包含了针对设备的共同的编译产物，主要是 Java 应用代码和 Java 库。
• /out/target/product/<product_name>/：包含了针对特定设备的编译结果以及平台相关的 C/C++ 库和二进制文件。其中，<product_name>是具体目标设备的名称。
• /out/dist/：包含了为多种分发而准备的包，通过“make disttarget”将文件拷贝到该目录，默认的编译目标不会产生该目录。

Build 生成的镜像文件

Build 的产物中最重要的是三个镜像文件，它们都位于 /out/target/product/<product_name>/ 目录下。

这三个文件是：

• system.img：包含了 Android OS 的系统文件库，可执行文件以及预置的应用程序，将被挂载为根分区。 ？
• ramdisk.img：在启动时将被 Linux 内核挂载为只读分区，它包含了 /init 文件和一些配置文件。它用来挂载其他系统镜像并启动 init 进程。
• userdata.img：将被挂载为 /data，包含了应用程序相关的数据以及和用户相关的数据。

$ make fastboot adb

androidcode@ubuntu:~$ lsusb# 竟然将Nexus 5 手机识别为 Nexus 4
Bus 001 Device 003: ID 18d1:4ee2 Google Inc. Nexus 4 (debug)

# adb protocol on passion (Nexus One)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e12", MODE="0600", OWNER="username"
# fastboot protocol on passion (Nexus One)
SUBSYSTEM=="usb", ATTR{idVendor}=="0bb4", ATTR{idProduct}=="0fff", MODE="0600", OWNER="username"
# adb protocol on crespo/crespo4g (Nexus S)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e22", MODE="0600", OWNER="username"
# fastboot protocol on crespo/crespo4g (Nexus S)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e20", MODE="0600", OWNER="username"
# adb protocol on stingray/wingray (Xoom)
SUBSYSTEM=="usb", ATTR{idVendor}=="22b8", ATTR{idProduct}=="70a9", MODE="0600", OWNER="username"
# fastboot protocol on stingray/wingray (Xoom)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="708c", MODE="0600", OWNER="username"
# adb protocol on maguro/toro (Galaxy Nexus)
SUBSYSTEM=="usb", ATTR{idVendor}=="04e8", ATTR{idProduct}=="6860", MODE="0600", OWNER="username"
# fastboot protocol on maguro/toro (Galaxy Nexus)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e30", MODE="0600", OWNER="username"
# adb protocol on panda (PandaBoard)
SUBSYSTEM=="usb", ATTR{idVendor}=="0451", ATTR{idProduct}=="d101", MODE="0600", OWNER="username"
# adb protocol on panda (PandaBoard ES)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="d002", MODE="0600", OWNER="username"
# fastboot protocol on panda (PandaBoard)
SUBSYSTEM=="usb", ATTR{idVendor}=="0451", ATTR{idProduct}=="d022", MODE="0600", OWNER="username"
# usbboot protocol on panda (PandaBoard)
SUBSYSTEM=="usb", ATTR{idVendor}=="0451", ATTR{idProduct}=="d00f", MODE="0600", OWNER="username"
# usbboot protocol on panda (PandaBoard ES)
SUBSYSTEM=="usb", ATTR{idVendor}=="0451", ATTR{idProduct}=="d010", MODE="0600", OWNER="username"
# adb protocol on grouper/tilapia (Nexus 7)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e42", MODE="0600", OWNER="username"
# fastboot protocol on grouper/tilapia (Nexus 7)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e40", MODE="0600", OWNER="username"
# adb protocol on manta (Nexus 10)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4ee2", MODE="0600", OWNER="username"
# fastboot protocol on manta (Nexus 10)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4ee0", MODE="0600", OWNER="username"  

sudo sed -i 's/username/androidcode/g' /etc/udev/rules.d/51-android.rules

# fastboot protocol onmanta (Nexus 5)
SUBSYSTEM=="usb",ATTR{idVendor}=="18d1", ATTR{idProduct}=="4ee2",MODE="0600", OWNER="androidcode"  

$ wget -S -O - http://source.android.com/source/51-android.rules | sed "s/<username>/$USER/" | sudo tee >/dev/null /etc/udev/rules.d/51-android.rules; sudo udevadm control --reload-rules

wget -S -O - http://source.android.com/source/51-android.rules | sed "s/<username>/androidcode/" | sudo tee >/dev/null /etc/udev/rules.d/51-android.rules; sudo udevadm control --reload-rules

5）给Nexus 5 刷机需要首先对Nexus 5手机进行解锁，解锁以后才能刷机。一般情况，在Nexus 5手机连接电脑正常的情况下，执行 fastboot oem unlock 命令，即完成对Nexus 5手机设备进行解锁处理。

Unlocking the bootloader

It's possible to flash a custom system only if the bootloader allows it, andthe bootloader is locked by default. You can unlock the bootloader, but be aware that doing so deletes the user data for privacy reasons (the unlock operation needs to run only once). After unlocking, all data on the device is erased, i.e. both the applications' private data and the shared data that is accessible over USB, including photos and movies. Be sure to back up any precious files before unlocking the bootloader.

With the device in fastboot mode, unlock the bootloader using:(刷机模式下进行手机设备的解锁)

$ fastboot oem unlock

The procedure must be confirmed on-screen.

On Nexus 10, after unlocking the bootloader, the internal storage remains unformatted. You can format the device using:

$ fastboot format cache
$ fastboot format userdata

To re-lock the bootloader, use:（给手机设备上锁）

$ fastboot oem lock

Note: Re-locking the bootloading on a Motorola Xoom erases user data (including the shared USB data).

6）在对Nexus 5 进行刷机的时候，需要先进入刷机模式，Nexus 5手机连接电脑正常的情况下，执行 adb reboot bootloader 命令，即可使Nexus 5进入刷机模式。

Booting into fastboot mode

During a cold boot of a device, use the following key combinations to boot into fastboot mode, which isa mode in the bootloader that can be used to flash the device:

You can also use the command adb reboot bootloader to reboot from Android directly into the bootloader with no key combinations.

参考链接：https://source.android.com/source/running.html#booting-into-fastboot-mode

7）添加 Nexus 5 刷机的工作目录 /home/androidcode/AndroidDevlop/android-4.4.4_r1/out/target/product/hammerhead 到ubuntu 14.04.5系统的环境变量 ANDROID_PRODUCT_OUT 中，然后执行刷机命令。

Flashing a device

You can flash an entire Android system in a single command; doing so verifies the system being flashed iscompatible with the installedbootloaderandradio,writes theboot,recovery, and systempartitions together, andthen reboots the system.Flashing also erases all user data, similarly to fastboot oem unlock.

Place the device in fastboot mode either manually by holding the appropriate key combination at boot, or from the shell with:

$ adb reboot bootloader

Once the device is in fastboot mode, run:

$ fastboot flashall -w

The -w option wipes the /data partition on the device; this is useful for your first time flashing a particular device but is otherwise unnecessary.

Note: Filesystems created via fastboot on Motorola Xoom do not function optimally. We recommend re-creating filesystems through recovery, using: $ adb reboot recovery. While in recovery, open the menu (press Power + Volume Up), wipe the cache partition, then wipe data.

刷机模式下，直接执行 fastboot flashall -w 会提示没有设置刷机工作目录的错误，意思是需要 -p 指定刷机的工作目录或者将刷机的工作目录添加到环境变量 ANDROID_PRODUCT_OUT中。

androidcode@ubuntu:~$ fastboot flashall -w
error: neither -p product specified nor ANDROID_PRODUCT_OUT set
androidcode@ubuntu:~$ 

执行下面的命令进行刷机：

fastboot flashall -w -p /home/androidcode/AndroidDevlop/android-4.4.4_r1/out/target/product/hammerhead

或者添加刷机工作目录 /home/androidcode/AndroidDevlop/android-4.4.4_r1/out/target/product/hammerhead 到环境变量 ANDROID_PRODUCT_OUT 中。

# 添加环境变量到/etc/profile中
sudo gedit /etc/profileexport ANDROID_PRODUCT_OUT=/home/androidcode/AndroidDevlop/android-4.4.4_r1/out/target/product/hammerhead# 刷新文件
source /etc/profile

按照的google官方的方法，对Nexus 5手机进行刷机操作。

androidcode@ubuntu:~$ adb reboot bootloader
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
androidcode@ubuntu:~$ fastboot flashall -w
Creating filesystem with parameters:Size: 13725835264Block size: 4096Blocks per group: 32768Inodes per group: 8144Inode size: 256Journal blocks: 32768Label: Blocks: 3351034Block groups: 103Reserved block group size: 823
Created filesystem with 11/838832 inodes and 93654/3351034 blocks
Creating filesystem with parameters:Size: 734003200Block size: 4096Blocks per group: 32768Inodes per group: 7472Inode size: 256Journal blocks: 2800Label: Blocks: 179200Block groups: 6Reserved block group size: 47
Created filesystem with 11/44832 inodes and 5813/179200 blocks
--------------------------------------------
Bootloader Version...: HHZ11k
Baseband Version.....: M8974A-2.0.50.1.16
Serial Number........: 03150dde09380642
--------------------------------------------
checking product...
OKAY [  0.096s]
sending 'boot' (8700 KB)...
OKAY [  1.432s]
writing 'boot'...
OKAY [  0.750s]
sending 'recovery' (9284 KB)...
OKAY [  1.627s]
writing 'recovery'...
OKAY [  0.777s]
erasing 'system'...
OKAY [  1.172s]
sending 'system' (291004 KB)...
OKAY [ 37.996s]
writing 'system'...
OKAY [ 21.097s]
erasing 'userdata'...
OKAY [ 10.255s]
sending 'userdata' (137318 KB)...
OKAY [ 19.143s]
writing 'userdata'...
OKAY [  9.124s]
erasing 'cache'...
OKAY [  0.634s]
sending 'cache' (13348 KB)...
OKAY [  1.999s]
writing 'cache'...
OKAY [  1.068s]
rebooting...finished. total time: 107.665s
androidcode@ubuntu:~$ 

8）Nexus 5手机刷机成功的截图

感谢链接：

https://source.android.com/source/running.html#booting-into-fastboot-mode

http://blog.csdn.net/andie_guo/article/details/16879443

http://blog.csdn.net/heiding215/article/details/44565673

http://www.cnblogs.com/helloZQP/p/4198588.html

http://www.ibm.com/developerworks/cn/opensource/os-cn-android-build/index.html

http://blog.csdn.net/dd864140130/article/details/51718187

http://www.cnblogs.com/wxishang1991/p/5649517.html

http://blog.csdn.net/liuhaoyutz/article/details/8485820

编译Android 4.4.4 r1的源码刷Nexus 5手机详细教程相关推荐

1. Python实现飞机大战-第二部分(附源码、素材、超详细教程)

   飞机大战第二部分 1.前言 2.飞机射击 2.1.添加子弹的相关设置 2.2.创建文件bullet.py 2.3.修改game_functions.py 2.4.修改mian.py 2.5.射击效果 ...

2. 【游戏开发实战】Unity从零开发多人视频聊天功能，无聊了就和自己视频聊天（附源码 | Mirror | 多人视频 | 详细教程）

   文章目录 一.前言 二.思考问题与解决方案 1.思考问题 2.解决方案 2.1.Unity中如何开启摄像头并对图像进行采样 2.2.图像如何中转给其他客户端 2.3.如何实现清晰度切换 2.4.客户端 ...

3. uni-app - 最详细 H5 网页接入微信支付功能，提供从详细的示例代码与注释（移动端网页实现微信支付能力，微信公众号前端支付 JSAPI / JS-SDK 详细示例源码）官方最新超级详细教程

   前言 关于 uni-app 项目中接入微信支付的文章鱼龙混杂,各种 JSAPI / JS-SDK 乱代码.过时.没注释.不讲流程原理,非常难用. 本文实现了 uni-app H5 移动端网页项目,实现 ...

4. ubuntu 14.04.5 编译Android 4.4.4 r1源码（最新）

   本文博客链接:http://blog.csdn.net/qq1084283172/article/details/54426189 吐槽:ubuntu系统真是让人又爱又恨,也有可能是VMware Wo ...

5. android浪漫樱花凋零动态壁纸应用源码

   android浪漫樱花凋零动态壁纸应用源码,是从那个安卓教程网拿过来的,本项目是一套基于安卓的樱花动态壁纸项目源码,安装以后桌面没有图标,但是可以在修改壁纸-动态壁纸中找到.我的分辨率是480×854 ...

6. Android高版本P/Q/R源码编译指南

          Android高版本P/Q/R源码编译指南 Android源码编译系列博客: Android.bp你真的了解吗 Android.bp入门指南之Android.mk转换成Android.b ...

7. 对google手机编译android源码刷机

   一.简介 最近因为修改系统源码层某功能的代码,对多个版本的系统源码进行了编译,并刷到手机中.如果是单纯研究Android源码或Android手机系统层的某个功能,以google原生Android手机和 ...

8. android系统源码7.1.2_r8下载，编译，运行到nexus5X上,修改源码并编译SDK进行测试

   一,学习android系统源码下载,编译的作用 1,可以自己 DIY 自己的rom系统,从系统层面,宏观的加深理解 android系统 2,编译自己的 userdebug(原生root权限) rom, ...

9. Android经典著名的百大框架源码解析（retrofit、Okhttp、Glide、Zxing、dagger等等）

   我们Android程序员每天都要和源码打交道.经过数年的学习,大多数程序员可以"写"代码,或者至少是拷贝并修改代码.而且,我们教授编程的方式强调编写代码的艺术,而不是如何阅读代码. ...

10. java音频源码,Android Java实时音频SDK示例源码下载 - 开发者中心 - ZEGO即构科技

    示例源码 本地下载 本地下载 GitHub下载 说明 示例代码运行指引 1 准备环境 在开始集成 ZEGO Express SDK 前,请确保开发环境满足以下要求(以下说明皆以 macOS 开发电脑为 ...

最新文章

1. 某程序员以阿里为原型写小说！阿里员工：每件事都是真的！网友：建议拍成电视剧！...
2. 大数据教程（9.1）流量汇总排序的mr实现
3. Python练习_三级菜单
4. Linux 格式化输出当前系统时间
5. java list断点续传_java实现文件断点续传下载功能
6. can not open file Permission denied at securecrt_linux_crack.pl line 57
7. 属性动画基础之ValueAnimator
8. 15 操作系统第四章 文件管理 文件的物理结构 文件存储空间管理
9. 计算机发展史较为重大的事件,图说：15件计算机发展史中的重大事件(7)
10. 知物由学 |“网状世界”下，无处可逃的信息安全
11. Atitit 编程语言编程方法的进化演进 sp  COP ,AOP ,SOP
12. 文献跟踪、文献订阅工具
13. python批量ppt转图片，pdf转图片，word转图片脚本
14. 人脸对齐：Wing Loss人脸关键点检测算法2018
15. 计算机组成原理——中央处理器
16. 入职腾讯第九年，我辞职了!!!
17. 如何识别一张图片中的字体，并复刻
18. Vue3 企业级优雅实战 - 组件库框架 - 4 组件库的 CSS 架构
19. 服务器网站绕过备案,腾讯云服务器如何利用阿里DCDN绕过备案
20. es6方法 数组去重 多个数组去重 数组对象去重

热门文章

1. thinkPHP开发的彩票网站源码，含pc端和手机端
2. 促进大数据发展行动纲要
3. 从零开始搭建公司电商系统架构技术栈，这套架构绝了...
4. java 解析p12_java读取*.p12证书的信息
5. mysql数据库内连接和外连接的区别
6. 远程连接工具Putty 相关
7. php txt bom,使用 PHP 函数或者软件去除文件的 BOM 头字符 - 文章教程
8. Access的BOM开发(2)基础信息
9. MediaCreationTool2004 U盘安装系统
10. itools苹果录屏大师_如何录制ZOOM视频会议？实用的录屏软件