net start mysql 失败_net start mysql出错,显示错误1067
展开全部
你的配置e5a48de588b662616964757a686964616f31333332633064信息 错误 这个是我现在用的 你改下目录就行了
[client]
port=3306
[mysql]
default-character-set=utf8
# SERVER SECTION
# ----------------------------------------------------------------------
#
# The following options will be read by the MySQL Server. Make sure that
# you have installed the server correctly (see above) so it reads this
# file.
#
[mysqld]
# The TCP/IP Port the MySQL Server will listen on
port=3306
#Path to installation directory. All paths are usually resolved relative to this.
basedir="E:/wamp/mysql/"
#Path to the database root
datadir="E:/wamp/mysql/data/Data/"
# The default character set that will be used when a new schema or table is
# created and no character set is defined
character-set-server=utf8
# The default storage engine that will be used when create new tables when
default-storage-engine=INNODB
# Set the SQL mode to strict
sql-mode="STRICT_TRANS_TABLES,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION"
# The maximum amount of concurrent sessions the MySQL server will
# allow. One of these connections will be reserved for a user with
# SUPER privileges to allow the administrator to login even if the
# connection limit has been reached.
max_connections=100
# Query cache is used to cache SELECT results and later return them
# without actual executing the same query once again. Having the query
# cache enabled may result in significant speed improvements, if your
# have a lot of identical queries and rarely changing tables. See the
# "Qcache_lowmem_prunes" status variable to check if the current value
# is high enough for your load.
# Note: In case your tables change very often or if your queries are
# textually different every time, the query cache may result in a
# slowdown instead of a performance improvement.
query_cache_size=0
# The number of open tables for all threads. Increasing this value
# increases the number of file descriptors that mysqld requires.
# Therefore you have to make sure to set the amount of open files
# allowed to at least 4096 in the variable "open-files-limit" in
# section [mysqld_safe]
table_cache=256
# Maximum size for internal (in-memory) temporary tables. If a table
# grows larger than this value, it is automatically converted to disk
# based table This limitation is for a single table. There can be many
# of them.
tmp_table_size=34M
# How many threads we should keep in a cache for reuse. When a client
# disconnects, the client's threads are put in the cache if there aren't
# more than thread_cache_size threads from before. This greatly reduces
# the amount of thread creations needed if you have a lot of new
# connections. (Normally this doesn't give a notable performance
# improvement if you have a good thread implementation.)
thread_cache_size=8
#*** MyISAM Specific options
# The maximum size of the temporary file MySQL is allowed to use while
# recreating the index (during REPAIR, ALTER TABLE or LOAD DATA INFILE.
# If the file-size would be bigger than this, the index will be created
# through the key cache (which is slower).
myisam_max_sort_file_size=100G
# If the temporary file used for fast index creation would be bigger
# than using the key cache by the amount specified here, then prefer the
# key cache method. This is mainly used to force long character keys in
# large tables to use the slower key cache method to create the index.
myisam_sort_buffer_size=68M
# Size of the Key Buffer, used to cache index blocks for MyISAM tables.
# Do not set it larger than 30% of your available memory, as some memory
# is also required by the OS to cache rows. Even if you're not using
# MyISAM tables, you should still set it to 8-64M as it will also be
# used for internal temporary disk tables.
key_buffer_size=55M
# Size of the buffer used for doing full table scans of MyISAM tables.
# Allocated per thread, if a full scan is needed.
read_buffer_size=64K
read_rnd_buffer_size=256K
# This buffer is allocated when MySQL needs to rebuild the index in
# REPAIR, OPTIMZE, ALTER table statements as well as in LOAD DATA INFILE
# into an empty table. It is allocated per thread so be careful with
# large settings.
sort_buffer_size=256K
#*** INNODB Specific options ***
# Use this option if you have a MySQL server with InnoDB support enabled
# but you do not plan to use it. This will save memory and disk space
# and speed up some things.
#skip-innodb
# Additional memory pool that is used by InnoDB to store metadata
# information. If InnoDB requires more memory for this purpose it will
# start to allocate it from the OS. As this is fast enough on most
# recent operating systems, you normally do not need to change this
# value. SHOW INNODB STATUS will display the current amount used.
innodb_additional_mem_pool_size=3M
# If set to 1, InnoDB will flush (fsync) the transaction logs to the
# disk at each commit, which offers full ACID behavior. If you are
# willing to compromise this safety, and you are running small
# transactions, you may set this to 0 or 2 to reduce disk I/O to the
# logs. Value 0 means that the log is only written to the log file and
# the log file flushed to disk approximately once per second. Value 2
# means the log is written to the log file at each commit, but the log
# file is only flushed to disk approximately once per second.
innodb_flush_log_at_trx_commit=1
# The size of the buffer InnoDB uses for buffering log data. As soon as
# it is full, InnoDB will have to flush it to disk. As it is flushed
# once per second anyway, it does not make sense to have it very large
# (even with long transactions).
innodb_log_buffer_size=2M
# InnoDB, unlike MyISAM, uses a buffer pool to cache both indexes and
# row data. The bigger you set this the less disk I/O is needed to
# access data in tables. On a dedicated database server you may set this
# parameter up to 80% of the machine physical memory size. Do not set it
# too large, though, because competition of the physical memory may
# cause paging in the operating system. Note that on 32bit systems you
# might be limited to 2-3.5G of user level memory per process, so do not
# set it too high.
innodb_buffer_pool_size=106M
# Size of each log file in a log group. You should set the combined size
# of log files to about 25%-100% of your buffer pool size to avoid
# unneeded buffer pool flush activity on log file overwrite. However,
# note that a larger logfile size will increase the time needed for the
# recovery process.
innodb_log_file_size=53M
# Number of threads allowed inside the InnoDB kernel. The optimal value
# depends highly on the application, hardware as well as the OS
# scheduler properties. A too high value may lead to thread thrashing.
innodb_thread_concurrency=10
net start mysql 失败_net start mysql出错,显示错误1067相关推荐
- linux安装源码mysql失败,linux停mysql源码安装
当前位置:我的异常网» Linux/Unix » linux停mysql源码安装 linux停mysql源码安装 www.myexceptions.net 网友分享于:2013-07-19 浏览: ...
- linus启动mysql失败_Linux下MySQL启动失败的解决一例
Linux下MySQL启动失败的解决一例: 当敲mysql命令时 Can't connect to local MySQL server through socket '/var/lib/mysql/ ...
- linux关闭mysql失败_Linux系统mysql访问失败该怎样处理
对于MySQL,大家并不一定陌生,他是一个关系型的数据库管理系统,不过最近有网友在使用Linux系统的时候,对MySQL访问失败,这是什么原因呢?又该怎样解决呢?下面就让小编来教你怎样解决这样的问题. ...
- python连接mysql失败_python连接mysql失败怎么解决
连接数据库,使用下面语句报错:db = MySQLdb.connect("localhost", "root", "mysqladmin", ...
- Windows10 mysql解决MySQL服务无法启动 系统出错 发生系统错误 1067
查看日志就是这个问题:Fatal error: Can't open and lock privilege tables: Table 'mysql.host' doesn't exi 最近学习用到m ...
- bat备份MySQL失败_bat备份mysql的方法
我们在管理维护服务器的时候,为了方式数据丢失,常常会用到备份数据库,一般小的数据库使用phpmyadmin直接备份就可以了,但如果数据库大于2M以上,phpmyadmin就备份不了了,现在我们就来讲一 ...
- matlab load失败,MATLAB读取文件出错:错误使用 load 无法读取 MAT 文件
错误使用 load 无法读取 MAT 文件 C:\XX\MathWorks\MATLAB\R2018a\matlabprefs.mat.不是二进制 MAT 文件.请尝试执行 load -ASCII 以 ...
- yii ajax验证失败返回提示,Yii ajax显示错误提示,messagebox
在Yii中,可以利用ajax执行一个action,但是这个action有时候会有弹出错误讯息的需求,这时候的处理方式如下 基本思想 利用exception,比如 throw new CHttpExce ...
- yum mysql 启动失败_Linux下MySQL数据库yum升级后无法启动解决办法 | 系统运维
说明: 操作系统:CentOS 5.8 Web运行环境:Apache+MySQL+PHP(全部使用yum命令在线安装) Apache版本:2.2.3 MySQL版本:5.0.95 PHP版本:5.1. ...
最新文章
- X264编码流程详解(转)
- python2异步编程_最新Python异步编程详解
- 上科大提出:对抗神经网络 动态人像系统SofGAN!
- [图像处理]指定任意灰度变换
- Activation function in Neural Network
- SQL注入攻击原理与防御措施
- Drozer的基本使用
- centOS下mysql主从配置
- 奇虎360java面试_2016奇虎360JAVA研发工程师内推笔试题
- 深入了解Xcode 7——代码编辑
- python cmap_Python cmap包_程序模块 - PyPI - Python中文网
- 图解HTTP四:返回结果的 HTTP 状态码
- 【Linux】Centos安装mvn命令(maven)
- Java开发一个登陆窗体,包括用户名,密码以及提交按钮和重置按钮,当用户输入amy,密码123456,弹出登陆成功提示对话框
- 苹果手机fiddler代理后无法联网的问题
- 简单分析实现运维利器---web远程ssh终端录像回放libl
- 设计心理学中的重要概念(三)头脑中的知识与外界知识
- 51劳动节由来| 五一劳动节的来历|51劳动节起源
- 停牌期间前复权价格波动检查
- 当我给表弟用python写了个雷霆战机后
热门文章
- 使用mysql++写入BLOB数据
- Asianux将成为最先进的安全Linux操作系统
- plsq卸载 删除注册表、_别再用老方法卸载电脑软件了,只会让电脑越来越慢
- cli vue 外部js 引入 文件_javascript - vue cli构建的项目中,vue组件里怎么引入外部js文件里的方法...
- python语言的类型是_Python的语言类型
- iis php5.3套件,IIS下安装php5.3
- oracle修改用户密码命令_oracle 11g dba用户秘密修改其他用户密码
- java slot_聊聊sentinel的DegradeSlot
- 否在为一个新品牌或企业寻找设计独特标识的灵感?集设给你灵感
- php中创建函数的正确方法,如何在PHP中创建一个函数