一、安装前准备工作:

1、创建用户useradd weblogic;创建用户成功linux系统会自动创建一个和用户名相同的分组,并将该用户分到改组中。并会在/home路径下创建一个和用户名相同的路径,比如我们创建的weblogic。

注:当然,你也可以通过groupadd -g GID groupname(GID代表创建组的ID,一般大于500),然后useradd –d userhome –g GID username(userhome 代表用户的主目录,GID 为前一步创建的组ID)创建用户并将用户分到相应的组里面。

2、卸载掉linux系统自带的jdk,安装我们自己的jdk,建议和开发过程中用到的jdk版本一致。

注:jdk的卸载和安装参见:http://www.linuxidc.com/Linux/2016-12/138043.htm。

二、开始安装:
a.?创建weblogic用户组.?

useradd weblogic
passwd weblogic

更改jdk版本

2、进入安装目录
#cd /home
#cp jdk-7u76-linux-x64.rpm /usr/local
#cd /usr/local
给所有用户添加可执行的权限

#rpm -ivh jdk-7u76-linux-x64.rpm

设置环境变量

#vi /etc/profile

打开后,在文档最下方加上以下环境变量配置代码:

export JAVA_HOME=/usr/java/jdk1.6.0_45
export CLASSPATH=.:$JAVA_HOME/lib/dt.jar:$JAVA_HOME/lib/tools.jar
export PATH=$JAVA_HOME/bin:$PATH

执行生效

#. /etc/profile

weblogic用户

export JAVA_HOME=/usr/java/jdk1.6.0_45

export JAVA_BIN=/usr/java/jdk1.6.0_45/bin

export PATH=$PATH:$JAVA_HOME/bin

export CLASSPATH=.:$JAVA_HOME/lib/dt.jar:$JAVA_HOME/lib/tools.jar

export JAVA_HOME JAVA_BIN PATH CLASSPATH

注意:export PATH=$JAVA_HOME/bin:$PATH,注意将$PATH放到最后。以免造成新旧版本问题。
当你已经成功把jdk1.6.0_45 安装到 /usr/java,并且配置好了系统环境变量
执行 # java -version 时就是 显示jdk1.6.0_45,是因为你的linux系统有默认的jdk;执行
cp jdk-6u7-linux-i586.bin /usr
即将jdk复制到/usr目录下,然后进入/usr目录cd /usr

执行权限

chmod +x jdk-6u45-linux-x64.bin

执行安装命令

./jdk-6u45-linux-x64.bin

1、# cd /usr/bin

# ln -s -f /usr/java/jdk1.6.0_45/jre/bin/java

# ln -s -f /usr/java/jdk1.6.0_45/bin/javac

2、接着卸载jdk-1.7.0_76,再次重新安装。卸载方法:

先查看jdk-1.7.0_76包名

#rpm -qa | grep jdk

接着执行

#rpm -e jdk-1.7.0_76-fcs

卸载完后,再次重新安装jdk-7u76-linux-x64.rpm 。

1、进入安装路径:/home/weblogic

2、将安装文件wls1036_generic.jar放入安装目录

3、chmod a+x wls1036_generic.jar  赋予安装文件可执行的权限

4、执行安装命令:java -jar filename.jar -mode=console

注:如果安装文件是.bin格式的文件,安装命令为:./wls1036_generic.bin -mode=console;(你可以不加“-mode=console”的控制台文本模式,因为在你安装时无法启动图形安装界面时它会自动的进入文本控制台模式的)

5、控制台安装:

一、安装weblogic10.3.6 64位:

-bash-4.1$ java -jar wls1036_generic.jar
Unable to instantiate GUI, defaulting to console mode.无法实例化 GUI,默认进入控制台模式。
Extracting 0%....................................................................................................100%

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Welcome:
--------

This installer will guide you through the installation of WebLogic 10.3.6.0.
Type "Next" or enter to proceed to the next prompt.  If you want to change data entered previously, type "Previous".  You may quit the installer at any time by typing "Exit".

Enter [Exit][Next]> 回车

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Choose Middleware Home Directory:
---------------------------------

"Middleware Home" = [Enter new value or use default
"/bea/weblogic/Oracle/Middleware"]

Enter new Middleware Home OR [Exit][Previous][Next]> /bea/weblogic/

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Choose Middleware Home Directory:
---------------------------------

"Middleware Home" = [/bea/weblogic]

Use above value or select another option:
    1 - Enter new Middleware Home
    2 - Change to default [/bea/weblogic/Oracle/Middleware]

Enter option number to select OR [Exit][Previous][Next]> 1

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Choose Middleware Home Directory:
---------------------------------

"Middleware Home" = [/bea/weblogic]

Enter new Middleware Home OR [Exit][Previous][Next]>

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Choose Middleware Home Directory:
---------------------------------

Warning

/bea/weblogic directory is not empty. Proceed with installation?

Enter [Exit][Previous][Next]>

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Register for Security Updates:
------------------------------

Provide your email address for security updates and  to initiate configuration manager.

1|Email:[]
  2|Support Password:[]
  3|Receive Security Update:[Yes]

Enter index number to select OR [Exit][Previous][Next]> 3

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Register for Security Updates:
------------------------------

Provide your email address for security updates and  to initiate configuration manager.

"Receive Security Update:" = [Enter new value or use default "Yes"]

Enter [Yes][No]? no

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Register for Security Updates:
------------------------------

Provide your email address for security updates and  to initiate configuration manager.

"Receive Security Update:" = [Enter new value or use default "Yes"]

Enter [Yes][No]? yes

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Register for Security Updates:
------------------------------

Provide your email address for security updates and  to initiate configuration manager.

1|Email:[]
  2|Support Password:[]
  3|Receive Security Update:[No]

Enter index number to select OR [Exit][Previous][Next]>

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Register for Security Updates:
------------------------------

Provide your email address for security updates and  to initiate configuration manager.

1|Email:[]
  2|Support Password:[]
  3|Receive Security Update:[No]

Enter index number to select OR [Exit][Previous][Next]>

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Choose Install Type:
--------------------

Select the type of installation you wish to perform.

->1|Typical
    |  Install the following product(s) and component(s):
    | - WebLogic Server
    | - Oracle Coherence

2|Custom
    |  Choose software products and components to install and perform optional
    |configuration.

Enter index number to select OR [Exit][Previous][Next]> 2

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Choose Products and Components:
-------------------------------

Release 10.3.6.0
    |_____WebLogic Server [1] x
    |    |_____Core Application Server [1.1] x
    |    |_____Administration Console [1.2] x
    |    |_____Configuration Wizard and Upgrade Framework [1.3] x
    |    |_____Web 2.0 HTTP Pub-Sub Server [1.4] x
    |    |_____WebLogic SCA [1.5] x
    |    |_____WebLogic JDBC Drivers [1.6] x
    |    |_____Third Party JDBC Drivers [1.7] x
    |    |_____WebLogic Server Clients [1.8] x
    |    |_____WebLogic Web Server Plugins [1.9] x
    |    |_____UDDI and Xquery Support [1.10] x
    |    |_____Server Examples [1.11]
    |    |_____Evaluation Database [1.12] x
    |_____Oracle Coherence [2] x
        |_____Coherence Product Files [2.1] x
        |_____Coherence Examples [2.2]

*Estimated size of installation: 690.2 MB

Enter number exactly as it appears in brackets to toggle selection OR [Exit][Previous][Next]> 2

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Choose Products and Components:
-------------------------------

Release 10.3.6.0
    |_____WebLogic Server [1] x
    |    |_____Core Application Server [1.1] x
    |    |_____Administration Console [1.2] x
    |    |_____Configuration Wizard and Upgrade Framework [1.3] x
    |    |_____Web 2.0 HTTP Pub-Sub Server [1.4] x
    |    |_____WebLogic SCA [1.5] x
    |    |_____WebLogic JDBC Drivers [1.6] x
    |    |_____Third Party JDBC Drivers [1.7] x
    |    |_____WebLogic Server Clients [1.8] x
    |    |_____WebLogic Web Server Plugins [1.9] x
    |    |_____UDDI and Xquery Support [1.10] x
    |    |_____Server Examples [1.11]
    |    |_____Evaluation Database [1.12] x
    |_____Oracle Coherence [2]
        |_____Coherence Product Files [2.1]
        |_____Coherence Examples [2.2]

*Estimated size of installation: 678.7 MB

Enter number exactly as it appears in brackets to toggle selection OR [Exit][Previous][Next]>

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

JDK Selection (Any * indicates Oracle Supplied VM):
---------------------------------------------------

JDK(s) chosen will be installed.  Defaults will be used in script string-substitution if installed.

1|Add Local Jdk
  2|/usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0.x86_64[x]

*Estimated size of installation:  678.7 MB

Enter 1 to add or >= 2 to toggle selection  OR [Exit][Previous][Next]>

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Choose Product Installation Directories:
----------------------------------------

Middleware Home Directory: [/bea/weblogic]

Product Installation Directories:

"WebLogic Server" = [Enter new value or use default
"/bea/weblogic/wlserver_10.3"]

Enter new WebLogic Server OR [Exit][Previous][Next]>

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

The following Products and JDKs will be installed:
--------------------------------------------------

WebLogic Platform 10.3.6.0
    |_____WebLogic Server
        |_____Core Application Server
        |_____Administration Console
        |_____Configuration Wizard and Upgrade Framework
        |_____Web 2.0 HTTP Pub-Sub Server
        |_____WebLogic SCA
        |_____WebLogic JDBC Drivers
        |_____Third Party JDBC Drivers
        |_____WebLogic Server Clients
        |_____WebLogic Web Server Plugins
        |_____UDDI and Xquery Support
        |_____Evaluation Database

*Estimated size of installation: 678.8 MB

Enter [Exit][Previous][Next]>

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Installing files..

0%          25%          50%          75%          100%
[------------|------------|------------|------------]
[***************************************************]

Performing String Substitutions...

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Configuring OCM...

0%          25%          50%          75%          100%
[------------|------------|------------|------------]
[***************************************************]

Creating Domains...

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Installation Complete

Congratulations! Installation is complete.

Press [Enter] to continue or type [Exit]>

<-------------------- Oracle Installer - WebLogic 10.3.6.0 ------------------->

Clean up process in progress ...

二、配置domains

cd /home/weblogic/Oracle/Middleware/wlserver_10.3/common/bin
-bash-4.1$ ./config.sh
Unable to instantiate GUI, defaulting to console mode.

<------------------- Fusion Middleware Configuration Wizard ------------------>

Welcome:
--------

Choose between creating and extending a domain. Based on your selection,
the Configuration Wizard guides you through the steps to generate a new or
extend an existing domain.

->1|Create a new WebLogic domain
    |    Create a WebLogic domain in your projects directory.

2|Extend an existing WebLogic domain
    |    Use this option to add new components to an existing domain and modify    |configuration settings.

Enter index number to select OR [Exit][Next]> 1

<------------------- Fusion Middleware Configuration Wizard ------------------>

Select Domain Source:
---------------------

Select the source from which the domain will be created. You can create the
domain by selecting from the required components or by selecting from a
list of existing domain templates.

->1|Choose Weblogic Platform components
    |    You can choose the Weblogic component(s) that you want supported in
    |your domain.

2|Choose custom template
    |    Choose this option if you want to use an existing  template. This
    |could be a custom created template using the Template Builder.

Enter index number to select OR [Exit][Previous][Next]> 1

<------------------- Fusion Middleware Configuration Wizard ------------------>

Application Template Selection:
-------------------------------

Available Templates
    |_____Basic WebLogic Server Domain - 10.3.6.0 [wlserver_10.3]x
    |_____Basic WebLogic SIP Server Domain - 10.3.6.0 [wlserver_10.3] [2]
    |_____WebLogic Advanced Web Services for JAX-RPC Extension - 10.3.6.0 [wlserver_10.3] [3]
    |_____WebLogic Advanced Web Services for JAX-WS Extension - 10.3.6.0 [wlserver_10.3] [4]

Enter number exactly as it appears in brackets to toggle selection OR [Exit][Previous][Next]>

<------------------- Fusion Middleware Configuration Wizard ------------------>

Edit Domain Information:
------------------------

|  Name  |    Value    |
  _|________|_____________|
  1| *Name: | base_domain |

Enter value for "Name" OR [Exit][Previous][Next]> wlyxweb

<------------------- Fusion Middleware Configuration Wizard ------------------>

Edit Domain Information:
------------------------

|  Name  |  Value  |
  _|________|_________|
  1| *Name: | wlyxweb |

Use above value or select another option:
    1 - Modify "Name"
    2 - Discard Changes

Enter option number to select OR [Exit][Previous][Next]>

<------------------- Fusion Middleware Configuration Wizard ------------------>

Select the target domain directory for this domain:
---------------------------------------------------

"Target Location" = [Enter new value or use default
"/bea/weblogic/user_projects/domains"]

Enter new Target Location OR [Exit][Previous][Next]> /wlyx/webapp/domains

<------------------- Fusion Middleware Configuration Wizard ------------------>

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the
default administrator used to start development mode servers.

|          Name          |                  Value                  |
  _|_________________________|_________________________________________|
  1|        *Name:          |                weblogic                |
  2|    *User password:    |                                        |
  3| *Confirm user password: |                                        |
  4|      Description:      | This user is the default administrator. |

Use above value or select another option:
    1 - Modify "Name"
    2 - Modify "User password"
    3 - Modify "Confirm user password"
    4 - Modify "Description"

Enter option number to select OR [Exit][Previous][Next]> 2

<------------------- Fusion Middleware Configuration Wizard ------------------>

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the
default administrator used to start development mode servers.

"*User password:" = []

Enter new *User password: OR [Exit][Reset][Accept]> welwlyx50

<------------------- Fusion Middleware Configuration Wizard ------------------>

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the
default administrator used to start development mode servers.

|          Name          |                  Value                  |
  _|_________________________|_________________________________________|
  1|        *Name:          |                weblogic                |
  2|    *User password:    |                *********                |
  3| *Confirm user password: |                                        |
  4|      Description:      | This user is the default administrator. |

Use above value or select another option:
    1 - Modify "Name"
    2 - Modify "User password"
    3 - Modify "Confirm user password"
    4 - Modify "Description"
    5 - Discard Changes

Enter option number to select OR [Exit][Previous][Next]> 3

<------------------- Fusion Middleware Configuration Wizard ------------------>

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the
default administrator used to start development mode servers.

"*Confirm user password:" = []

Enter new *Confirm user password: OR [Exit][Reset][Accept]> welwlyx50

<------------------- Fusion Middleware Configuration Wizard ------------------>

Configure Administrator User Name and Password:
-----------------------------------------------

Create a user to be assigned to the Administrator role. This user is the
default administrator used to start development mode servers.

|          Name          |                  Value                  |
  _|_________________________|_________________________________________|
  1|        *Name:          |                weblogic                |
  2|    *User password:    |                *********                |
  3| *Confirm user password: |                *********                |
  4|      Description:      | This user is the default administrator. |

Use above value or select another option:
    1 - Modify "Name"
    2 - Modify "User password"
    3 - Modify "Confirm user password"
    4 - Modify "Description"
    5 - Discard Changes

Enter option number to select OR [Exit][Previous][Next]>

<------------------- Fusion Middleware Configuration Wizard ------------------>

Domain Mode Configuration:
--------------------------

Enable Development or Production Mode for this domain.

->1|Development Mode

2|Production Mode

Enter index number to select OR [Exit][Previous][Next]> 2

<------------------- Fusion Middleware Configuration Wizard ------------------>

Java SDK Selection:
-------------------

->1|N/A SDK 1.6.0_24 @ /usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0.x86_64
  2|Other Java SDK

Enter index number to select OR [Exit][Previous][Next]> 2

<------------------- Fusion Middleware Configuration Wizard ------------------>

Java SDK Selection:
-------------------

"JVM Directory" = []

Enter new JVM Directory OR [Exit][Previous][Next]> /bea/jdk/jdk1.6.0_37

<------------------- Fusion Middleware Configuration Wizard ------------------>

Java SDK Selection:
-------------------

"JVM Directory" = [/bea/jdk/jdk1.6.0_37]

Enter new JVM Directory OR [Exit][Previous][Next]>

<------------------- Fusion Middleware Configuration Wizard ------------------>

Select Optional Configuration:
------------------------------

1|Administration Server [ ]
  2|Managed Servers, Clusters and Machines [ ]
  3|RDBMS Security Store [ ]

Enter index number to select OR [Exit][Previous][Next]> 1

<------------------- Fusion Middleware Configuration Wizard ------------------>

Select Optional Configuration:
------------------------------

1|Administration Server [x]
  2|Managed Servers, Clusters and Machines [ ]
  3|RDBMS Security Store [ ]

Enter index number to select OR [Exit][Previous][Next]>

<------------------- Fusion Middleware Configuration Wizard ------------------>

Configure the Administration Server:
------------------------------------

Each WebLogic Server domain must have one Administration Server. The
Administration Server is used to perform administrative tasks.

|      Name      |        Value        |
  _|__________________|_____________________|
  1|      *Name:      |    AdminServer    |
  2| *Listen address: | All Local Addresses |
  3|  Listen port:  |        7001        |
  4| SSL listen port: |        N/A        |
  5|  SSL enabled:  |        false        |

Use above value or select another option:
    1 - Modify "Name"
    2 - Modify "Listen address"
    3 - Modify "Listen port"
    4 - Modify "SSL enabled"

Enter option number to select OR [Exit][Previous][Next]>

<------------------- Fusion Middleware Configuration Wizard ------------------>

Creating Domain...

0%          25%          50%          75%          100%
[------------|------------|------------|------------]
[***************************************************]

**** Domain Created Successfully! ****

四:weblogic的使用

1、启动服务时无需输入用户名和密码

进入到你新建的域中:cd /home/weblogic/Oracle/Middleware/user_projects/domains/base_domain/servers/AdminServer

然后在该文件夹下新建名为security的文件夹:mkdir security

在刚刚新建是文件夹中新建名为boot.properties文件:vi boot.properties

然后在该文件中输入:

username=weblogic

password=weblogc123

保存后退出。重启weblogic。此时你会发觉,weblogic再也不会提示要求你输入weblogic管理台的用户名和密码了。

重启后我们来到刚刚的新建的文件夹中查看新建的文件:
cd /home/weblogic/Oracle/Middleware/user_projects/domains/base_domain/servers/AdminServer/security

vi boot.properties发现它的内容已经变成下面这个样子了:

#Sun Aug 04 10:23:54 CST 2013

password={AES}KWRQeICbIyJLO3zh+v+/9JeJtCzpK9ge6j4pqf9sSqA\=

username={AES}ICJVfwErXU5MOQyVPzcvVpKBkK6gI6UFlwqkkEuVgBg\=

Weblogic把它给加密了,因此只有装Weblogic的那个人即System Admin才真正知道Weblogic控制台的登录信息,这样就很安全了。

2、启动weblogic服务

cd /home/weblogic/Oracle/Middleware/user_projects/domains/base_domain

./startWeblogic.sh

nohup ./startWeblogic.sh &(nohup命令:如果你正在运行一个进程,而且你觉得在退出帐户时该进程还不会结束,那么可以使用nohup命令。
该命令可以在你退出帐户/关闭终端之后继续运行相应的进程。nohup就是不挂起的意思( no hang up))

找台服务器 启动浏览器 输入 http://10.85.31.242:7001/console

WebLogic 12c下配置节点管理器管理受管理服务器 http://www.linuxidc.com/Linux/2015-12/126788.htm

WebLogic重新设置管理员账号和口令 http://www.linuxidc.com/Linux/2015-08/121052.htm

CentOS 6.3安装配置Weblogic 10  http://www.linuxidc.com/Linux/2014-02/96918.htm

Oracle WebLogic 11g 安装部署文档 PDF http://www.linuxidc.com/Linux/2013-04/83658.htm

Linux部署Weblogic11g http://www.linuxidc.com/Linux/2013-01/77940.htm

Oracle基础教程之安装与配置Weblogic单实例 http://www.linuxidc.com/Linux/2012-02/54418.htm

Linux下Weblogic卸载 http://www.linuxidc.com/Linux/2012-01/51886.htm

Weblogic多机器集群的配置 http://www.linuxidc.com/Linux/2011-12/50577.htm

Weblogic的安装和配置 http://www.linuxidc.com/Linux/2011-12/49082.htm

更多Oracle相关信息见Oracle 专题页面 http://www.linuxidc.com/topicnews.aspx?tid=12

本文永久更新链接地址:http://www.linuxidc.com/Linux/2016-12/138044.htm

WebLogic安装Linux centos7相关推荐

  1. 安装Linux CentOS7操作系统

    目录 前言 1.安装虚拟机 1.1新建虚拟机 1.2 调整虚拟机硬件 1.3启动虚拟机 1.4创建虚拟机用户 总结 前言 本文记录学习在VMware虚拟机上,安装Linux CentOS7操作系统的全 ...

  2. 技嘉H370 HD3主板的物理机上安装 Linux CentOS7 解决无网卡驱动

    技嘉H370 HD3主板的物理机上安装 Linux CentOS7 解决无网卡驱动 一般的机器网卡驱动会随Linux系统一起安装,但有些奇葩的主板的网卡驱动Linux安装包没有,这就得找到它的网卡驱动 ...

  3. U盘安装Linux Centos7

    U盘安装Linux Centos7遇到的问题 公司为了扩充内网测试服务器采购两台 型号: 戴尔(DELL) OptiPlex 7060MT i7-8700丨32G丨2T+256G固态 网卡:集成网卡型 ...

  4. u盘linux和win7双系统安装教程,双系统安装Win7系统U盘安装linux centos7,详细步骤...

    转载 最近,我想在win7计算机上安装Linux双系统,因此我下载了Linux centos7版本. 经过两天的折腾,我在互联网上阅读了很多帖子,遇到了很多问题. 幸运的是,安装终于成功了,下面将对安 ...

  5. 安装linux7如何查看u盘位置,win7系统下u盘安装linux centos7,详细步骤,亲测

    一,准备 1. Centos 7镜像文件:​​ 下载的话网上很多,这里提供一个下载路径:​ http://isoredirect.centos.org/centos/7/isos/x86_64/ 2. ...

  6. win7 制作linux u盘安装教程,win7系统下u盘安装linux centos7,详细步骤,亲测

    近段时间想在自己的win7电脑上安装个linux双系统,于是下载了linux centos7这个版本,折腾了两天,网上的各种帖子看了不少,也遇到很多问题,幸运的是终于装成功了,下面就说明一下安装的整个 ...

  7. 虚拟机virtualBox安装Linux(CentOS7)详细图解

    一.虚拟机以镜像下载 virtualBox下载地址:https://www.virtualbox.org/wiki/Downloads CentOS7镜像下载地址:https://www.centos ...

  8. 物理机如何安装Linux centos7

    物理机如何安装centos7 首先整理工作流程: 1.下载centos7镜像文件 2.制作U盘启动盘(UltraISO) 3.进入BIOS使用U盘启动 4.基本配置选择 首先整理工作流程: 1.下载c ...

  9. 用机械硬盘安装linux,HDD 机械硬盘 安装 linux(centos7)

    1. 下载 UltraISO 文件-->打开, 选中centos.iso镜像;   启动-->写入硬盘映像-->硬盘驱动器(选中u盘)写入方式(USB-HDD+v2)-->写入 ...

最新文章

  1. 安装Oracle Database 11g 找不到文件“WFMLRSVCApp.ear” .
  2. 语言模型GPT-2挤牙膏式开源,放出774M预训练模型,称是倒数第二版
  3. java 语言如何判断素数_C语言实验之判断素数(循环结构java)方法讲解
  4. Niginx笔记-Linux上源码安装Niginx
  5. 看看30万码农怎么评论:培训出来的程序员真的很渣吗?
  6. 可以写计算机哪些方面的论文,计算机应用基础方面论文题目 计算机应用基础论文题目哪个好...
  7. sql limit 子句_SQL Order by子句概述
  8. Python循环遍历(cycle)
  9. kubernetes视频教程笔记 (7)-安装Harbor私有仓库
  10. 52840LED/KEY
  11. 免费好用的的在线代码IDE网站,支持python
  12. w7查看计算机每天开关机时间,WINDOWS7 怎么查看上次开关机时间
  13. 毕业有救了?!留美学生创造出了自动写论文的机器人!
  14. 【读书分享】精益企业——高效能组织如何规模化创新?(完整笔记PPT)
  15. ARM9的存储结构~~大端存储和小端存储
  16. Android 用官方SDK实现第三方(qq、微信、微博等)分享和登录
  17. 西安外国语大学计算机语言学,2017年西安外国语大学语言学及应用语言学832现代汉语考研题库...
  18. 光伏逆变器“核心器件”IGBT在光伏逆变器的应用
  19. Python 去掉空格的方法
  20. Java算法大全,java进制装换,java日期转换

热门文章

  1. Windows2008的安装
  2. because the following virtual functions are pure within
  3. 法律专业计算机基础试卷答案,大学计算机基础试题及答案
  4. TensorFlow在Anaconda环境下创建
  5. 不用ajax实现动态分页,详解ajax +jtemplate实现动态分页
  6. 宜昌宝塔河项目_宜昌城区首个垃圾分类定时定点投放点启用 厨余垃圾破袋投放...
  7. mysql主从1594错误_3分钟解决MySQL主从1594错误
  8. 《C++ Primer 第五版》第二章(1-4小节)------基本内置类型,初始化和赋值及声明和定义,指针和引用,const和constexpr
  9. mysql学习笔记06分组语句的使用
  10. linux kill命令使用方法,Linux初学者的killall命令(8个例子)