saltstack二

配置管理

haproxy的安装部署

haproxy各版本安装包下载路径https://www.haproxy.org/download/1.6/src/，跳转地址为http，改为https即可

创建相关目录

# 创建配置目录
[root@linux-node1 ~]# mkdir /srv/salt/prod/pkg/
[root@linux-node1 ~]# mkdir /srv/salt/prod/haproxy/
# 启动脚本、配置文件放在这里
[root@linux-node1 ~]# mkdir /srv/salt/prod/haproxy/files

编写pkg-init文件

[root@linux-node1 ~]# cd /srv/salt/prod/pkg/
[root@linux-node1 pkg]# vim pkg-init.sls
pkg-init:                            # ID describepkg.installed:                    # pkg模块 installed方法- names:- gcc- gcc-c++- glibc- make- autoconf- openssl- openssl-devel

编写方法：

首先自己先安装一遍，然后将步骤移植到sls文件中。

[root@linux-node1 prod]# cd /srv/salt/prod/haproxy/files/
[root@linux-node1 files]# ll
-rw-r--r-- 1 root root 1538976 11月  7 09:04 haproxy-1.6.2.tar.gz
[root@linux-node1 files]# cp haproxy-1.6.2.tar.gz  /usr/local/src/
[root@linux-node1 files]# cd /usr/local/src/
[root@linux-node1 src]# tar zxf haproxy-1.6.2.tar.gz
[root@linux-node1 src]# cd haproxy-1.6.2
[root@linux-node1 haproxy-1.6.2]# make TARGET=linux26 PREFIX=/usr/local/haproxy && make install PREFIX=/usr/local/haproxy

修改启动文件

[root@linux-node1 examples]# pwd
/usr/local/src/haproxy-1.6.2/examples
[root@linux-node1 examples]# vim haproxy.init
BIN=/usr/local/haproxy/sbin/$BASENAME
# 拷贝启动文件到salt目录
[root@linux-node1 examples]# cp haproxy.init /srv/salt/prod/haproxy/files/

编写安装文件

[root@linux-node1 examples]# cd /srv/salt/prod/haproxy/
[root@linux-node1 haproxy]# vim install.slsinclude:                                                   # 导入pkg目录下的pkg-init.sls文件- pkg.pkg-inithaproxy-install:                                           # 定义声明一个ID，方便调用，如果不写，就必须在这儿写上下面name声明，表文件路径file.managed:                                            # file模块下的managed方法- name: /usr/local/src/haproxy-1.6.2.tar.gz            # name声明，文件路径。说明：minion端是没有这个路径和文件的，但是它会从下面source路径将文件拷贝到该路径，没有文件夹就创建    - source: salt://haproxy/files/haproxy-1.6.2.tar.gz    # 文件源，minion端从这里拷贝- user: root                                           # 用户- group: root                                          # 组- mode: 755                                            # 权限cmd.run:                                                 # 执行命令- name: cd /usr/local/src/ && tar zxf haproxy-1.6.2.tar.gz && cd haproxy-1.6.2 && make TARGET=linux26 PREFIX=/usr/local/haproxy && make install PREFIX=/usr/local/haproxy- unless: test -d /usr/local/haproxy                   # 判断是否存在，unless返回值是false时，才执行命令- require:                                             # 依赖下面的内容- pkg: pkg-init                                      # pkg是模块- file: haproxy-install                              # file也是模块   格式： - 模块： ID  依赖文件如果有ID声明就写ID声明，如果没有就写name声明haproxy-init:                                              # 定义声明一个IDfile.managed:                                          - name: /etc/init.d/haproxy- source: salt://haproxy/files/haproxy.init　　　　　　　#修改启动文件并将其放入该目录- user: root- group: root- mode: 755- require:- cmd: haproxy-installcmd.run:- name: chkconfig --add haproxy- unless: chkconfig --list |grep haproxy- require:- file: haproxy-initnet.ipv4.ip_nonlocal_bind:                                   # 定义声明一个IDsysctl.present:                                          # 修改系统的kernel值- value: 1                                               # 改值为1haproxy-config-dir:                                                    file.directory:- name: /etc/haproxy- user: root- group: root- mode: 755

查看安装文件并执行

[root@linux-node1 haproxy]# pwd
/srv/salt/prod/haproxy
[root@linux-node1 haproxy]# tree
.
├── files
│   ├── haproxy-1.6.2.tar.gz
│   └── haproxy.init
└── install.sls
# 单个执行，另外需要指定环境是prod，不指定默认为base
[root@linux-node1 haproxy]# salt 'linux-node1.*' state.sls haproxy.install saltenv='prod'

注意上面的saltenv对应的master配置文件为

file_roots:base:- /srv/salt/basetest:- /srv/salt/testdev:- /srv/salt/dev/services- /srv/salt/dev/statesprod:- /srv/salt/prod

编辑配置文件

# 编辑top文件
[root@linux-node1 cluster]# cd /srv/salt/base/
[root@linux-node1 base]# vim top.sls
base:'*':- init.env_init
prod:'linux-node1.example.com':- cluster.haproxy-outside'linux-node2.example.com':- cluster.haproxy-outside

修改后端RS的端口

[root@linux-node1 base]# vim /etc/httpd/conf/httpd.conf
# 端口改成8080，与上面haproxy的配置一样

测试通过后，执行高级状态

[root@linux-node1 base]# salt '*' state.highstate test=True
[root@linux-node1 base]# salt '*' state.highstate

在RS上设置index.html

分别色设置，没有的话会报错403

[root@linux-node2 ~]# vim /var/www/html/index.html

访问haproxy的状态

# 用户名密码在haproxy-outside.cfg中配置

keepalived的安装部署

首先自己安装一次

[root@linux-node1 base]# cd /usr/local/src
[root@linux-node1 src]# wget http://www.keepalived.org/software/keepalived-1.2.19.tar.gz
[root@linux-node1 src]# tar zxf keepalived-1.2.19.tar.gz
[root@linux-node1 src]# cd keepalived-1.2.19
[root@linux-node1 keepalived-1.2.19]# ./configure --prefix=/usr/local/keepalived --disable-fwmark
[root@linux-node1 keepalived-1.2.19]# make && make install

建立文件放置目录

[root@linux-node1 etc]# pwd
/usr/local/src/keepalived-1.2.19/keepalived/etc
[root@linux-node1 etc]# mkdir /srv/salt/prod/keepalived/
[root@linux-node1 etc]# mkdir /srv/salt/prod/keepalived/files
[root@linux-node1 etc]# cp init.d/keepalived.init /srv/salt/prod/keepalived/files/
[root@linux-node1 etc]# cp keepalived/keepalived.conf /srv/salt/prod/keepalived/files/
[root@linux-node1 etc]# cp /usr/local/src/keepalived-1.2.19.tar.gz /srv/salt/prod/keepalived/files/
[root@linux-node1 init.d]# cp /usr/local/src/keepalived-1.2.19/keepalived/etc/init.d/keepalived.sysconfig /srv/salt/prod/keepalived/files/
# files中的文件有
[root@linux-node1 sysconfig]# cd /srv/salt/prod/keepalived/files/
[root@linux-node1 files]# ll
总用量 336
-rw-r--r-- 1 root root 330164 1月   2 23:47 keepalived-1.2.19.tar.gz
-rw-r--r-- 1 root root   3562 1月   2 23:46 keepalived.conf
-rwxr-xr-x 1 root root   1335 1月   2 23:51 keepalived.init
-rw-r--r-- 1 root root    667 1月   3 00:13 keepalived.sysconfig

修改启动脚本

[root@linux-node1 files]# vim keepalived.init
daemon /usr/local/keepalived/sbin/keepalived ${KEEPALIVED_OPTIONS}

编辑安装文件

[root@linux-node1 keepalived]# pwd
/srv/salt/prod/keepalived
[root@linux-node1 keepalived]# cat install.sls
include:- pkg.pkg-initkeepalived-install:file.managed:- name: /usr/local/src/keepalived-1.2.19.tar.gz- source: salt://keepalived/files/keepalived-1.2.19.tar.gz- user: root- group: root- mode: 755cmd.run:- name: cd /usr/local/src && tar zxf keepalived-1.2.19.tar.gz  && cd keepalived-1.2.19 && ./configure --prefix=/usr/local/keepalived --disable-fwmark && make && make install && ln -s /usr/local/keepalived/sbin/keepalived /usr/sbin- unless: test -d /usr/local/keepalived- require:- pkg: pkg-init- file: keepalived-installkeepalived-init:file.managed:- name: /etc/init.d/keepalived- source: salt://keepalived/files/keepalived.init- user: root- group: root- mode: 755cmd.run:- name: chkconfig --add keepalived- unless: chkconfig --list | grep keepalived- require:- file: keepalived-init/etc/sysconfig/keepalived:file.managed:- source: salt://keepalived/files/keepalived.sysconfig- user: root- group: root- mode: 644keepalived-config:    //配置文件这块在这儿只是举个例子，实际是在下面单独配置修改（因为在实际应用中，每个keepalived的配置文件都不相同，这里就需要用到jinja对应传参）file.managed:
    - name: /etc/keepalived/keepalived.conf
    - source: salt://keepalived/files/keepalived.conf- user: root
    - group: root
    - mode: 644/etc/keepalived:file.directory:- user: root- group: root- mode: 755

执行安装

[root@linux-node1 keepalived]# salt '*' state.sls keepalived.install env=prod

业务模块

keepalived的配置文件

[root@linux-node1 ~]# cd /srv/salt/prod/cluster/files/
[root@linux-node1 files]# vim haproxy-outside-keepalived.conf! Configuration File for keepalived
global_defs {notification_email {saltstack@example.com}notification_email_from keepalived@example.comsmtp_server 127.0.0.1smtp_connect_timeout 30router_id {{ROUTEID}}
}vrrp_instance haproxy_ha {
state {{STATEID}}
interface eth0virtual_router_id 36
priority {{PRIORITYID}}advert_int 1
authentication {
auth_type PASSauth_pass 1111}virtual_ipaddress {10.0.0.11                        #  这个VIP在haproxy的配置文件中也有}
}

keepalived的启动文件

其中定义了上面需要的变量，用到了jinja模版

[root@linux-node1 cluster]# cd /srv/salt/prod/cluster/
[root@linux-node1 cluster]# vim haproxy-outside-keepalived.sls
include:- keepalived.installkeepalived-service:file.managed:- name: /etc/keepalived/keepalived.conf- source: salt://cluster/files/haproxy-outside-keepalived.conf- user: root- group: root- mode: 644- template: jinja{% if grains['fqdn'] == 'linux-node1.example.com' %}- ROUTEID: haproxy_ha     //格式 变量： 值- STATEID: MASTER- PRIORITYID: 150{% elif grains['fqdn'] == 'linux-node2.example.com' %}- ROUTEID: haproxy_ha- STATEID: BACKUP- PRIORITYID: 100{% endif %}service.running:- name: keepalived- enable: True- watch:- file: keepalived-service

注：require依赖监听软件包是否安装（没有安装就安装），watch是监听文件是否发生改变（发生改变就执行相应功能，如上例则为：监听文件改变，如果改变就重启服务）

编辑top文件

[root@linux-node1 base]# cd /srv/salt/base/
[root@linux-node1 base]# cat top.sls
base:'*':- init.env_init
prod:'linux-node1.example.com':- cluster.haproxy-outside- cluster.haproxy-outside-keepalived       //配置sls文件,其中include有keepalived.install，即执行该配置sls文件即可执行keepalived安装sls'linux-node2.example.com':- cluster.haproxy-outside- cluster.haproxy-outside-keepalived

执行高级状态

先单独执行下，看有没有错误在执行高级状态

[root@linux-node1 cluster]# salt '*' state.sls cluster.haproxy-outside-keepalived env=prod
[root@linux-node1 cluster]# salt '*' state.highstate

查看结果

[root@linux-node1 base]# ip a |grep eth0
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000inet 10.0.0.7/24 brd 10.0.0.255 scope global eth0inet 10.0.0.11/32 scope global eth0当master的keepaliveddown掉后，VIP会飘到backup上

haproxy的调度设置

[root@linux-node1 base]# grep "balance" /srv/salt/prod/cluster/files/haproxy-outside.cfg
balance roundrobin                         #轮询；source:固定不变可以在haproxy-status页面上查看到变化

如图

zabbix-agent的安装部署

开启pillar

[root@linux-node1 init]# vim /etc/salt/master
pillar_roots:base:- /srv/pillar/base[root@linux-node1 init]# mkdir /srv/pillar/base
[root@linux-node1 init]# /etc/init.d/salt-master restart
Stopping salt-master daemon:                               [确定]
Starting salt-master daemon:                               [确定]

编写zabbix-agent安装文件

[root@linux-node1 base]# cd /srv/salt/base/init/
[root@linux-node1 init]# vim zabbix_agent.sls
zabbix-agent-install:pkg.installed:- name: zabbix-agentfile.managed:- name: /etc/zabbix/zabbix_agentd.conf- source: salt://init/files/zabbix_agentd.conf- template: jinja- defaults:Server: {{ pillar['zabbix-agent']['Zabbix_Server'] }}- require:- pkg: zabbix-agent-installservice.running:- name: zabbix-agent- enable: True- watch:- pkg: zabbix-agent-install- file: zabbix-agent-install

编写top文件

[root@linux-node1 base]# cd /srv/pillar/base/
[root@linux-node1 base]# vim top.sls
base:'*':- zabbix

编写zabbix.sls

[root@linux-node1 base]# vim zabbix.sls
zabbix-agent:Zabbix_Server: 10.0.0.7
这里对应上面Server: {{ pillar['zabbix-agent']['Zabbix_Server'] }}

配置文件拷贝修改

[root@linux-node1 base]# cd /srv/salt/base/init/files
[root@linux-node1 init]# cp /etc/zabbix/zabbix_agentd.conf .[root@linux-node1 init]# grep 'Server' zabbix_agentd.conf
Server={{ Server }}                                      # 对应上面zabbix_agent.sls中的server

编辑env_init文件

[root@linux-node1 init]# vim env_init.sls
include:- init.dns- init.history- init.audit- init.sysctl- init.zabbix_agent
[root@linux-node1 init]# tree /srv/salt/base/init/
/srv/salt/base/init/
├── audit.sls
├── dns.sls
├── env_init.sls
├── files
│   ├── resolv.conf
│   └── zabbix_agentd.conf
├── history.sls
├── sysctl.sls
└── zabbix_agent.sls

另外epel的sls文件

[root@linux-node1 init]# vim epel.slsyum_repo_release:pkg.installed:- sources:- epel-release: http://mirrors.aliyun.com/epel/6/x86_64/epel-release-6-8.noarch.rpm- unless: rpm -qa | grep epel-release-6-8

安装libevent

[root@linux-node1 ~]# cd /srv/salt/prod/
[root@linux-node1 prod]# mkdir -pv libevent/files
[root@linux-node1 prod]# cd /srv/salt/prod/libevent
[root@linux-node1 libevent]# vim install.sls
libevent-source-install:file.managed:- name: /usr/local/src/libevent-2.0.22-stable.tar.gz- source: salt://libevent/files/libevent-2.0.22-stable.tar.gz- user: root- group: root- mode: 644cmd.run:- name: cd /usr/local/src && tar zxf libevent-2.0.22-stable.tar.gz && cd libevent-2.0.22-stable &&  ./configure --prefix=/usr/local/libevent && make && make install- unless: test -d /usr/local/libevent- require:- file: libevent-source-install[root@linux-node1 libevent]# pwd
/srv/salt/prod/libevent
[root@linux-node1 libevent]# tree
.
├── files
│   └── libevent-2.0.22-stable.tar.gz
└── install.sls[root@linux-node1 files]# salt '*' state.sls libevent.install env=prod
[root@linux-node1 files]# salt '*' state.highstate

新建用户，且不允许登录

[root@linux-node1 prod]# mkdir user
[root@linux-node1 prod]# cd user/
[root@linux-node1 user]# vim www.sls
www-user-group:group.present:- name: www- gid: 1000user.present:- name: www- fullname: www- shell: /sbin/nologin- uid: 1000- gid: 1000

安装memcahe

[root@linux-node1 prod]# cd /srv/salt/prod/
[root@linux-node1 prod]# mkdir -p memcache/files
[root@linux-node1 prod]# cd memcache/files/
[root@linux-node1 files]# cp memcached-1.4.24.tar.gz /usr/local/src/[root@linux-node1 memcache]# vim install.sls
include:- libevent.install                                # 将libevent文件包含进来memcached-source-install:file.managed:- name: /usr/local/src/memcached-1.4.24.tar.gz- source: salt://memcached/files/memcached-1.4.24.tar.gz- user: root- group: root- mode: 644cmd.run:- name: cd /usr/local/src && tar zxf memcached-1.4.24.tar.gz && cd memcached-1.4.24&& ./configure --prefix=/usr/local/memcached --enable-64bit --with-libevent=/usr/local/libevent && make && make install- unless: test -d /usr/local/memcached- require:- cmd: libevent-source-install                # libevent的ID- file: memcached-source-install

安装pcre

[root@linux-node1 prod]# mkdir /srv/salt/prod/pcre/files -p
[root@linux-node1 prod]# cd /srv/salt/prod/pcre/files/
[root@linux-node1 files]# cp pcre-8.37.tar.gz  /usr/local/src/
[root@linux-node1 prod]# cd /srv/salt/prod/pcre
[root@linux-node1 pcre]# cat install.sls
pcre-source-install:file.managed:- name: /usr/local/src/pcre-8.37.tar.gz- source: salt://pcre/files/pcre-8.37.tar.gz- user: root- group: root- mode: 755cmd.run:- name: cd /usr/local/src && tar zxf pcre-8.37.tar.gz && cd pcre-8.37 && ./configure --prefix=/usr/local/pcre && make && make install- unless: test -d /usr/local/pcre- require:- file: pcre-source-install

安装nginx

[root@linux-node1 nginx]# mkdir -p /srv/salt/prod/nginx/files
[root@linux-node1 nginx]# cd /srv/salt/prod/nginx/files/
[root@linux-node1 files]# cp nginx-1.9.1.tar.gz /usr/local/src/
[root@linux-node1 nginx]# cat install.sls
include:- pcre.install- user.www- pkg.pkg-init
nginx-source-install:file.managed:- name: /usr/local/src/nginx-1.9.1.tar.gz- source: salt://nginx/files/nginx-1.9.1.tar.gz- user: root- group: root- mode: 755cmd.run:- name: cd /usr/local/src && tar zxf nginx-1.9.1.tar.gz && cd nginx-1.9.1&& ./configure --prefix=/usr/local/nginx --user=www --group=www --with-http_ssl_module --with-http_stub_status_module --with-file-aio --with-http_dav_module --with-pcre=/usr/local/src/pcre-8.37 && make && make install && chown -R www:www /usr/local/nginx- unless: test -d /usr/local/nginx- require:- user: www-user-group- file: nginx-source-install- pkg: pkg-init- cmd: pcre-source-install[root@linux-node1 nginx]# cat service.sls
include:- nginx.installnginx-init:file.managed:- name: /etc/init.d/nginx- source: salt://nginx/files/nginx-init- mode: 755- user: root- group: rootcmd.run:- name: chkconfig --add nginx- unless: chkconfig --list | grep nginx- require:- file: nginx-init/usr/local/nginx/conf/nginx.conf:file.managed:- source: salt://nginx/files/nginx.conf- user: www- group: www- mode: 644 nginx-service:file.directory:- name: /usr/local/nginx/conf/vhost- require:- cmd: nginx-source-installservice.running:- name: nginx- enable: True- reload: True- require:- cmd: nginx-init- watch:- file: /usr/local/nginx/conf/nginx.conf[root@linux-node1 nginx]# tree
.
├── files
│   ├── nginx-1.9.1.tar.gz
│   ├── nginx.conf
│   └── nginx-init
├── install.sls
└── service.sls

PHP+memcahce/redis的安装

基础环境

[root@linux-node1 ~]# mkdir /srv/salt/prod/php/files -p
[root@linux-node1 ~]# cd /srv/salt/prod/php/files/
[root@linux-node1 files]# ll
总用量 18120
-rw-r--r-- 1 root root     2362 11月 14 23:06 init.d.php-fpm
-rw-r--r-- 1 root root    36459 11月 14 23:06 memcache-2.2.7.tgz
-rw-r--r-- 1 root root 18281659 11月 14 23:06 php-5.6.9.tar.gz
-rw-r--r-- 1 root root    22252 11月 14 23:06 php-fpm.conf.default
-rw-r--r-- 1 root root    69599 11月 14 23:06 php.ini-production
-rw-r--r-- 1 root root   134340 11月 14 23:06 redis-2.2.7.tgz

安装文件

[root@linux-node1 files]# cd ..
[root@linux-node1 php]# vim install.sls
pkg-php:pkg.installed:- names:- mysql-devel- openssl-devel- swig- libjpeg-turbo- libjpeg-turbo-devel- libpng- libpng-devel- freetype- freetype-devel- libxml2- libxml2-devel- zlib- zlib-devel- libcurl- libcurl-develphp-source-install:file.managed:- name: /usr/local/src/php-5.6.9.tar.gz- source: salt://php/files/php-5.6.9.tar.gz- user: root- group: root- mode: 755cmd.run:- name: cd /usr/local/src && tar zxf php-5.6.9.tar.gz && cd php-5.6.9&&  ./configure --prefix=/usr/local/php-fastcgi --with-pdo-mysql=mysqlnd --with-mysqli=mysqlnd --with-mysql=mysqlnd --with-jpeg-dir --with-png-dir --with-zlib --enable-xml  --with-libxml-dir --with-curl --enable-bcmath --enable-shmop --enable-sysvsem  --enable-inline-optimization --enable-mbregex --with-openssl --enable-mbstring --with-gd --enable-gd-native-ttf --with-freetype-dir=/usr/lib64 --with-gettext=/usr/lib64 --enable-sockets --with-xmlrpc --enable-zip --enable-soap --disable-debug --enable-opcache --enable-zip --with-config-file-path=/usr/local/php-fastcgi/etc --enable-fpm --with-fpm-user=www --with-fpm-group=www && make && make install- require:- file: php-source-install- user: www-user-group- unless: test -d /usr/local/php-fastcgipdo-plugin:cmd.run:- name: cd /usr/local/src/php-5.6.9/ext/pdo_mysql/ && /usr/local/php-fastcgi/bin/phpize && ./configure --with-php-config=/usr/local/php-fastcgi/bin/php-config &&  make&& make install- unless: test -f /usr/local/php-fastcgi/lib/php/extensions/*/pdo_mysql.so- require:- cmd: php-source-installphp-ini:file.managed:- name: /usr/local/php-fastcgi/etc/php.ini- source: salt://php/files/php.ini-production- user: root- group: root- mode: 644php-fpm:file.managed:- name: /usr/local/php-fastcgi/etc/php-fpm.conf- source: salt://php/files/php-fpm.conf.default- user: root- group: root- mode: 644php-fastcgi-service:file.managed:- name: /etc/init.d/php-fpm- source: salt://php/files/init.d.php-fpm- user: root- group: root- mode: 755cmd.run:- name: chkconfig --add php-fpm- unless: chkconfig --list | grep php-fpm- require:- file: php-fastcgi-serviceservice.running:- name: php-fpm- enable: True- require:- cmd: php-fastcgi-service- watch:- file: php-ini- file: php-fpm

memcache

[root@linux-node1 php]# cat php-memcache.sls
memcache-plugin:file.managed:- name: /usr/local/src/memcache-2.2.7.tgz- source: salt://php/files/memcache-2.2.7.tgz- user: root- group: root- mode: 755cmd.run:- name: cd /usr/local/src && tar zxf memcache-2.2.7.tgz && cd memcache-2.2.7&& /usr/local/php-fastcgi/bin/phpize && ./configure --enable-memcache --with-php-config=/usr/local/php-fastcgi/bin/php-config &&  make&& make install- unless: test -f /usr/local/php-fastcgi/lib/php/extensions/*/memcache.sorequire:- file: memcache-plugin- cmd: php-install/usr/local/php-fastcgi/etc/php.ini:file.append:- text:- extension=memcache.so

redis

[root@linux-node1 php]# cat php-redis.sls
redis-plugin:file.managed:- name: /usr/local/src/phpredis-2.2.7.tgz- source: salt://php/files/phpredis-2.2.7.tgz- user: root- group: root- mode: 755cmd.run:- name: cd /usr/local/src && tar zxf phpredis-2.2.7.tgz && cd phpredis-2.2.7&& /usr/local/php-fastcgi/bin/phpize && ./configure --with-php-config=/usr/local/php-fastcgi/bin/php-config &&  make&& make install- unless: test -f /usr/local/php-fastcgi/lib/php/extensions/*/redis.sorequire:- file: redis-plugin- cmd: php-install/usr/local/php-fastcgi/etc/php.ini:file.append:- text:- extension=redis.so

出处：http://www.cnblogs.com/caoxiaojian/

转载于:https://www.cnblogs.com/dannylinux/p/8962461.html

saltstack二相关推荐

SaltStack二次开发api
salt-api官方文档: http://www.unixhot.com/docs/saltstack/ref/netapi/all/salt.netapi.rest_cherrypy.html#a- ...
saltstack二次开发构建自己的api
看看salt能干什么呢也就是salt.states和salt.modules这2部分功能. salt-cloud,salt-ssh等众多功能,具有很强大的功能和当下最需要的功能,所以saltstac ...
Linux 运维入门到跑路书单推荐
一.基础入门 <鸟哥的Linux私房菜基础学习篇>:最具知名度的Linux入门书<鸟哥的Linux私房菜基础学习篇>,全面而详细地介绍了Linux操作系统. https://b ...
python linux运维教程推荐_Linux 运维入门到跑路书单推荐
一.基础入门 <鸟哥的Linux私房菜基础学习篇>:最具知名度的Linux入门书<鸟哥的Linux私房菜基础学习篇>,全面而详细地介绍了Linux操作系统.鸟哥的Linux私房 ...
saltstack实现haproxy+keepalived负载均衡+高可用(二)
一键部署haproxy+keepalived实现负载均衡+高可用实验环境: !!!! 特别注意: www.westos.org为test1的minion名字 test1: 172.25.1.1 ...
saltstack之(十二)配置管理mount
线上很多服务器都需要挂载存储上的公共目录,并实现开机启动(/etc/fstab),比如web的静态文件共享目录,日志远程集中收集等. 一.批量挂载部分. 1.在node1上配置nfs服务器,有关nfs ...
saltstack（十二）job管理
前一篇总结过mine函数,有自动调度的功能.不过那个针对命令行,函数.应用范围较少. 这一篇总结一下salt里面的job管理. 官网描述mark http://docs.saltstack.cn/to ...
saltstack之(二)软件包下载安装
由于salt组件的安装依赖较多,最好使用yum源安装(不建议使用源码安装).由于试验环境限制,不能使用网络,故增加了实验的难度.下面分可以访问internet和不可以访问internet两方面介绍sa ...
自动化运维之saltstack（二）states深入理解
深入了解SLS的可以参考这篇博文:http://www.ituring.com.cn/article/42238 个人觉得这篇文章翻译的不错,所以转载过来. Salt Sates 众多强大而有力的涉及 ...

saltstack二

saltstack二相关推荐

最新文章

热门文章