The best way to use Xtool X100 PAD2 for FEM programming

Look here: XTOOL X100 PAD2 is new FEM programming.

Possible to use Xtool X100 PAD2 for FEM programming?

Yes! FEM/BDC available

Source:

How it’s working with FEM?

Not by OBD its need soldering and work on FEM/BDC box… many steps backup and write and recover and need simulation platform FEM system to work

Can it read over OBD or need to use some spacial connections on opened FEM box?

Yes, need special connection and soldering on FEM box and connect to FEM simulation

Any other solutions for FEM key programming? OBD method is preferred

CGDI BMW, Lonsdor K518, OtoSys IM600, etc.

Option 1: CGDI BMW works for for FEM coding & programming

Option 2: Lonsdor K518ise works for FEM programming

Option 3: Auro IM600 renews FEM

Option 4: VVDI2 Xhorse working for FEM coding & programming

Option 1: CGDI BMW – FEM coding & programming

Option 2: Lonsdor K518ise – FEM programming

Option 3: Auro IM600 – FEM renew

Option 4: VVDI2 – FEM coding & programming

转载于:https://www.cnblogs.com/obd2tool/p/10315314.html

The best way to use Xtool X100 PAD2 for FEM programming相关推荐

Xtool X100 PAD2 Error Code 5 Data Not Exist Solution
If your XTOOL X100 Pad2 gives your error " GetUpdateListEx: Error code= 5. Data doesn't exist.& ...
【ERROR】java.lang.NoClassDefFoundError: Could not initialize class sun.awt.X11.XToolkit
tomcat 出现java.lang.NoClassDefFoundError: Could not initialize class sun.awt.X11.XToolkit运行时异常,主要原因是图 ...
java obd_XTOOL X100 PAD3通过OBD给2014 BMW CAS4 Key编程
主题:2014 BMW CAS4通过OTO使用XTOOL X100 PAD3进行钥匙编程. 需要准备什么: 车子:2014 BMW CAS4 钥匙:一把(原始)工作钥匙+一把新(空白)钥匙设备:XT ...
XTOOL EZ500全系统的诊断和特殊功能超越Xtool EZ400 EZ300 Xtool PAD
通过Xtool公司在深圳做XTOOL EZ500测试确定的汽油和柴油车,并提供全系统的诊断和特殊功能,它超越前辈Xtool设备,如Xtool EZ400,Xtool EZ300和X100 PAD. X ...
富勒x100滚轮无法调节音量怎么办？
解决办法: 在富勒的驱动里修改设置指针滚动为常规滚动即可.如下图所示. 指针模式和常规模式的区别指针模式:在屏幕上同时显示几个程序或文件,当鼠标指针移动到程序的区域内,上下滚轮作用即可使用. 常规模 ...
三星java世界x108_我对三星X100/X108的使用感受
该楼层疑似违规已被系统折叠隐藏此楼查看此楼一.先说一下个人比较不满意的地方吧! A.UFB确定没有TFT效果好,没有TFT细腻,我和比较S208比较过.X108的UFB亮度特别大,感觉设为默认值9 ...
【FT2000/4+X100】调试记录2--如何让生成X100固件
硬件环境FT2000/4+X100,单板结构,对外显示,运行银行麒麟操作系统. ## 二生成X100.BIN,烧写在桥片X100的QSPI Flash中下载"x100_pack_v1.7 ...
markdown pad2 无法使用gihub Markdown在线风格，提示“请求被中止: 未能创建 SSL/TLS 安全通道
markdown pad2 无法使用gihub Markdown在线风格,提示"请求被中止: 未能创建 SSL/TLS 安全通道" 首先要确认是否安装了 .Net Framewor ...
Markdown Pad2使用基础（总结）
文档创建时间:7/6/2020 11:12:08 PM 最后修改于:7/8/2020 9:09:10 PM 在此对该文档做简单说明: 该文档内容是对MarkdownPad 2编辑器的,在本人看来比较常 ...

The best way to use Xtool X100 PAD2 for FEM programming

The best way to use Xtool X100 PAD2 for FEM programming相关推荐

最新文章

热门文章