git push用法

git push：

推送本地分支到远程。

1.推送本地分支local-branch-1到新大远程分支remote-branch-1：

git push origin local-branch-1:refs/remote-branch-1

2.推送local-branch-2到已有的remote-branch-1，用于补充remote-branch-1：

git checkout local-branch-2

git rebase remote-branch-1

git push origin local-branch-2:refs/remote-branch-1

3.用local-branch-3覆盖remote-branch-1：

git push -f origin local-branch-2:refs/remote-branch-1

或者

git push origin :refs/remote-branch-1 //删除远程的remote-branch-1分支

git push origin local-branch-1:refs/remote-branch-1

4.查看push的结果

gitk remote-branch-1

5.推送tag

git push origin tag_name

6.删除t远程ag

git push origin :tag_name

附上git help文档：

GIT-PUSH(1) Git Manual GIT-PUSH(1)

NAME
git-push - Update remote refs along with associated objects

DESCRIPTION
Updates remote refs using local refs, while sending objects necessary to complete the given refs.

You can make interesting things happen to a repository every time you push into it, by setting up hooks there. See documentation for git-
receive-pack(1).

OPTIONS
       <repository>
           The "remote" repository that is destination of a push operation. This parameter can be either a URL (see the section GIT URLS below) or
           the name of a remote (see the section REMOTES below).

<refspec>...
The format of a <refspec> parameter is an optional plus +, followed by the source ref <src>, followed by a colon :, followed by the
destination ref <dst>. It is used to specify with what <src> object the <dst> ref in the remote repository is to be updated.

The <src> is often the name of the branch you would want to push, but it can be any arbitrary "SHA-1 expression", such as master~4 or
HEAD (see gitrevisions(7)).

The <dst> tells which ref on the remote side is updated with this push. Arbitrary expressions cannot be used here, an actual ref must
be named. If :<dst> is omitted, the same ref as <src> will be updated.

The object referenced by <src> is used to update the <dst> reference on the remote side, but by default this is only allowed if the
update can fast-forward <dst>. By having the optional leading +, you can tell git to update the <dst> ref even when the update is not a
fast-forward. This does not attempt to merge <src> into <dst>. See EXAMPLES below for details.

tag <tag> means the same as refs/tags/<tag>:refs/tags/<tag>.

Pushing an empty <src> allows you to delete the <dst> ref from the remote repository.

The special refspec : (or +: to allow non-fast-forward updates) directs git to push "matching" branches: for every branch that exists
           on the local side, the remote side is updated if a branch of the same name already exists on the remote side. This is the default
           operation mode if no explicit refspec is found (that is neither on the command line nor in any Push line of the corresponding remotes
           file---see below).

--all
Instead of naming each ref to push, specifies that all refs under refs/heads/ be pushed.

--mirror
           Instead of naming each ref to push, specifies that all refs under refs/ (which includes but is not limited to refs/heads/,
           refs/remotes/, and refs/tags/) be mirrored to the remote repository. Newly created local refs will be pushed to the remote end, locally
           updated refs will be force updated on the remote end, and deleted refs will be removed from the remote end. This is the default if the
           configuration option remote.<remote>.mirror is set.

-n, --dry-run
Do everything except actually send the updates.

--porcelain
Produce machine-readable output. The output status line for each ref will be tab-separated and sent to stdout instead of stderr. The
full symbolic names of the refs will be given.

--delete
All listed refs are deleted from the remote repository. This is the same as prefixing all refs with a colon.

--tags
All refs under refs/tags are pushed, in addition to refspecs explicitly listed on the command line.

--receive-pack=<git-receive-pack>, --exec=<git-receive-pack>
Path to the git-receive-pack program on the remote end. Sometimes useful when pushing to a remote repository over ssh, and you do not
have the program in a directory on the default $PATH.

-f, --force
Usually, the command refuses to update a remote ref that is not an ancestor of the local ref used to overwrite it. This flag disables
the check. This can cause the remote repository to lose commits; use it with care.

--repo=<repository>
           This option is only relevant if no <repository> argument is passed in the invocation. In this case, git push derives the remote name
           from the current branch: If it tracks a remote branch, then that remote repository is pushed to. Otherwise, the name "origin" is used.
           For this latter case, this option can be used to override the name "origin". In other words, the difference between these two commands

git push public #1
git push --repo=public #2

is that #1 always pushes to "public" whereas #2 pushes to "public" only if the current branch does not track a remote branch. This is
useful if you write an alias or script around git push.

-u, --set-upstream
For every branch that is up to date or successfully pushed, add upstream (tracking) reference, used by argument-less git-pull(1) and
other commands. For more information, see branch.<name>.merge in git-config(1).

--thin, --no-thin
These options are passed to git-send-pack(1). A thin transfer significantly reduces the amount of sent data when the sender and
receiver share many of the same objects in common. The default is --thin.

-q, --quiet
Suppress all output, including the listing of updated refs, unless an error occurs. Progress is not reported to the standard error
stream.

-v, --verbose
Run verbosely.

--progress
Progress status is reported on the standard error stream by default when it is attached to a terminal, unless -q is specified. This
flag forces progress status even if the standard error stream is not directed to a terminal.

--recurse-submodules=check
Check whether all submodule commits used by the revisions to be pushed are available on a remote tracking branch. Otherwise the push
will be aborted and the command will exit with non-zero status.

GIT URLS
In general, URLs contain information about the transport protocol, the address of the remote server, and the path to the repository.
Depending on the transport protocol, some of this information may be absent.

Git natively supports ssh, git, http, https, ftp, ftps, and rsync protocols. The following syntaxes may be used with them:

· ssh://[user@]host.xz[:port]/path/to/repo.git/

· git://host.xz[:port]/path/to/repo.git/

· http[s]://host.xz[:port]/path/to/repo.git/

· ftp[s]://host.xz[:port]/path/to/repo.git/

· rsync://host.xz/path/to/repo.git/

An alternative scp-like syntax may also be used with the ssh protocol:

· [user@]host.xz:path/to/repo.git/

The ssh and git protocols additionally support ~username expansion:

· ssh://[user@]host.xz[:port]/~[user]/path/to/repo.git/

· git://host.xz[:port]/~[user]/path/to/repo.git/

· [user@]host.xz:/~[user]/path/to/repo.git/

For local repositories, also supported by git natively, the following syntaxes may be used:

· /path/to/repo.git/

· file:///path/to/repo.git/

These two syntaxes are mostly equivalent, except when cloning, when the former implies --local option. See git-clone(1) for details.

When git doesn’t know how to handle a certain transport protocol, it attempts to use the remote-<transport> remote helper, if one exists.
To explicitly request a remote helper, the following syntax may be used:

· <transport>::<address>

where <address> may be a path, a server and path, or an arbitrary URL-like string recognized by the specific remote helper being invoked.
See git-remote-helpers(1) for details.

If there are a large number of similarly-named remote repositories and you want to use a different format for them (such that the URLs you
use will be rewritten into URLs that work), you can create a configuration section of the form:

[url "<actual url base>"]
insteadOf = <other url base>

For example, with this:

[url "git://git.host.xz/"]
insteadOf = host.xz:/path/to/
insteadOf = work:

a URL like "work:repo.git" or like "host.xz:/path/to/repo.git" will be rewritten in any context that takes a URL to be
"git://git.host.xz/repo.git".

If you want to rewrite URLs for push only, you can create a configuration section of the form:

[url "<actual url base>"]
pushInsteadOf = <other url base>

For example, with this:

[url "ssh://example.org/"]
pushInsteadOf = git://example.org/

a URL like "git://example.org/path/to/repo.git" will be rewritten to "ssh://example.org/path/to/repo.git" for pushes, but pulls will still
use the original URL.

REMOTES
The name of one of the following can be used instead of a URL as <repository> argument:

· a remote in the git configuration file: $GIT_DIR/config,

· a file in the $GIT_DIR/remotes directory, or

· a file in the $GIT_DIR/branches directory.

All of these also allow you to omit the refspec from the command line because they each contain a refspec which git will use by default.

Named remote in configuration file
       You can choose to provide the name of a remote which you had previously configured using git-remote(1), git-config(1) or even by a manual
       edit to the $GIT_DIR/config file. The URL of this remote will be used to access the repository. The refspec of this remote will be used by
       default when you do not provide a refspec on the command line. The entry in the config file would appear like this:

[remote "<name>"]
                           url = <url>
                           pushurl = <pushurl>
                           push = <refspec>
                           fetch = <refspec>

The <pushurl> is used for pushes only. It is optional and defaults to <url>.

Named file in $GIT_DIR/remotes
You can choose to provide the name of a file in $GIT_DIR/remotes. The URL in this file will be used to access the repository. The refspec
in this file will be used as default when you do not provide a refspec on the command line. This file should have the following format:

URL: one of the above URL format
Push: <refspec>
Pull: <refspec>

Push: lines are used by git push and Pull: lines are used by git pull and git fetch. Multiple Push: and Pull: lines may be specified for
additional branch mappings.

Named file in $GIT_DIR/branches
You can choose to provide the name of a file in $GIT_DIR/branches. The URL in this file will be used to access the repository. This file
should have the following format:

<url> is required; #<head> is optional.

Depending on the operation, git will use one of the following refspecs, if you don’t provide one on the command line. <branch> is the name
of this file in $GIT_DIR/branches and <head> defaults to master.

git fetch uses:

refs/heads/<head>:refs/heads/<branch>

git push uses:

HEAD:refs/heads/<head>

OUTPUT
The output of "git push" depends on the transport method used; this section describes the output when pushing over the git protocol (either
locally or via ssh).

The status of the push is output in tabular form, with each line representing the status of a single ref. Each line is of the form:

<flag> <summary> <from> -> <to> (<reason>)

If --porcelain is used, then each line of the output is of the form:

<flag> \t <from>:<to> \t <summary> (<reason>)

The status of up-to-date refs is shown only if --porcelain or --verbose option is used.

flag
A single character indicating the status of the ref:

(space)
for a successfully pushed fast-forward;

+
for a successful forced update;

-
for a successfully deleted ref;

*
for a successfully pushed new ref;

!
for a ref that was rejected or failed to push; and

=
for a ref that was up to date and did not need pushing.

summary
For a successfully pushed ref, the summary shows the old and new values of the ref in a form suitable for using as an argument to git
log (this is <old>..<new> in most cases, and <old>...<new> for forced non-fast-forward updates).

For a failed update, more details are given:

rejected
Git did not try to send the ref at all, typically because it is not a fast-forward and you did not force the update.

remote rejected
               The remote end refused the update. Usually caused by a hook on the remote side, or because the remote repository has one of the
               following safety options in effect: receive.denyCurrentBranch (for pushes to the checked out branch), receive.denyNonFastForwards
               (for forced non-fast-forward updates), receive.denyDeletes or receive.denyDeleteCurrent. See git-config(1).

remote failure
The remote end did not report the successful update of the ref, perhaps because of a temporary error on the remote side, a break in
the network connection, or other transient error.

from
The name of the local ref being pushed, minus its refs/<type>/ prefix. In the case of deletion, the name of the local ref is omitted.

to
The name of the remote ref being updated, minus its refs/<type>/ prefix.

reason
A human-readable explanation. In the case of successfully pushed refs, no explanation is needed. For a failed ref, the reason for
failure is described.

NOTE ABOUT FAST-FORWARDS
When an update changes a branch (or more in general, a ref) that used to point at commit A to point at another commit B, it is called a
fast-forward update if and only if B is a descendant of A.

In a fast-forward update from A to B, the set of commits that the original commit A built on top of is a subset of the commits the new
commit B builds on top of. Hence, it does not lose any history.

In contrast, a non-fast-forward update will lose history. For example, suppose you and somebody else started at the same commit X, and you
built a history leading to commit B while the other person built a history leading to commit A. The history looks like this:

B
/
---X---A

Further suppose that the other person already pushed changes leading to A back to the original repository you two obtained the original
commit X.

The push done by the other person updated the branch that used to point at commit X to point at commit A. It is a fast-forward.

But if you try to push, you will attempt to update the branch (that now points at A) with commit B. This does not fast-forward. If you did
so, the changes introduced by commit A will be lost, because everybody will now start building on top of B.

The command by default does not allow an update that is not a fast-forward to prevent such loss of history.

If you do not want to lose your work (history from X to B) nor the work by the other person (history from X to A), you would need to first
fetch the history from the repository, create a history that contains changes done by both parties, and push the result back.

You can perform "git pull", resolve potential conflicts, and "git push" the result. A "git pull" will create a merge commit C between
commits A and B.

B---C
/ /
---X---A

Updating A with the resulting merge commit will fast-forward and your push will be accepted.

Alternatively, you can rebase your change between X and B on top of A, with "git pull --rebase", and push the result back. The rebase will
create a new commit D that builds the change between X and B on top of A.

B   D
                /   /
            ---X---A

Again, updating A with this commit will fast-forward and your push will be accepted.

There is another common situation where you may encounter non-fast-forward rejection when you try to push, and it is possible even when you
       are pushing into a repository nobody else pushes into. After you push commit A yourself (in the first picture in this section), replace it
       with "git commit --amend" to produce commit B, and you try to push it out, because forgot that you have pushed A out already. In such a
       case, and only if you are certain that nobody in the meantime fetched your earlier commit A (and started building on top of it), you can
       run "git push --force" to overwrite it. In other words, "git push --force" is a method reserved for a case where you do mean to lose
       history.

EXAMPLES
       git push
           Works like git push <remote>, where <remote> is the current branch’s remote (or origin, if no remote is configured for the current
           branch).

git push origin
Without additional configuration, works like git push origin :.

The default behavior of this command when no <refspec> is given can be configured by setting the push option of the remote.

For example, to default to pushing only the current branch to origin use git config remote.origin.push HEAD. Any valid <refspec> (like
the ones in the examples below) can be configured as the default for git push origin.

git push origin :
Push "matching" branches to origin. See <refspec> in the OPTIONS section above for a description of "matching" branches.

git push origin master
Find a ref that matches master in the source repository (most likely, it would find refs/heads/master), and update the same ref (e.g.
refs/heads/master) in origin repository with it. If master did not exist remotely, it would be created.

git push origin HEAD
A handy way to push the current branch to the same name on the remote.

git push origin master:satellite/master dev:satellite/dev
Use the source ref that matches master (e.g. refs/heads/master) to update the ref that matches satellite/master (most probably
refs/remotes/satellite/master) in the origin repository, then do the same for dev and satellite/dev.

git push origin HEAD:master
Push the current branch to the remote ref matching master in the origin repository. This form is convenient to push the current branch
without thinking about its local name.

git push origin master:refs/heads/experimental
           Create the branch experimental in the origin repository by copying the current master branch. This form is only needed to create a new
           branch or tag in the remote repository when the local name and the remote name are different; otherwise, the ref name on its own will
           work.

git push origin :experimental
Find a ref that matches experimental in the origin repository (e.g. refs/heads/experimental), and delete it.

git push origin +dev:master
Update the origin repository’s master branch with the dev branch, allowing non-fast-forward updates. This can leave unreferenced
commits dangling in the origin repository. Consider the following situation, where a fast-forward is not possible:

o---o---o---A---B origin/master
\
X---Y---Z dev

The above command would change the origin repository to

A---B (unnamed branch)
/
o---o---o---X---Y---Z master

Commits A and B would no longer belong to a branch with a symbolic name, and so would be unreachable. As such, these commits would be
removed by a git gc command on the origin repository.

GIT
Part of the git(1) suite

Git 1.7.9.5 04/11/2012 GIT-PUSH(1)

git push用法相关推荐

20 个最常用的 Git 命令用法说明及示例
作者 | Sahiti Kappagantula 译者 | 弯月,责编 | 屠敏出品 | CSDN(ID:CSDNnews) 在这篇文章中,我将介绍在使用 Git 时最常使用的 20 个命令. 以下 ...
git rebase用法_Git：Clone别人的代码之后push到自己码云上失败的解决办法
最近也是刚开始使用gitee,比较生疏.场景是这样的: clone了朋友的一份代码到自己的本地,然后自己想把它保存到自己的gitee 私有仓库上,就在gitee上面创建了一个私有的仓库,然后多次pus ...
Git push基础用法
在使用git commit命令将修改从暂存区提交到本地版本库后,只剩下最后一步将本地版本库的分支推送到远程服务器上对应的分支了,这时候就需要用到git push命令了. git push的一般形式为 ...
Git push的常见用法
Git push 在使用git commit命令将修改从暂存区提交到本地版本库后,只剩下最后一步将本地版本库的分支推送到远程服务器上对应的分支了. git push的一般形式为 git push &l ...
Git push 常见用法
Git push 常见用法 - 浅浅念 - 博客园Git push 在使用git commit命令将修改从暂存区提交到本地版本库后,只剩下最后一步将本地版本库的分支推送到远程服务器上对应的分支了,如果 ...
git push -u的含义和用法
在我们第一次提交git的时候: 发现上面用了这个-u参数,也没作解释,特意搜索了下这个-u的用法,加了参数-u后,以后即可直接用git push代替git push origin master $ g ...
Git：远程分支----git pull和git push命令用法介绍
文章目录一.git pull 1.1 git pull命令的完整格式 1.2 省略本地分支名 1.3 当前分支与远程分支存在追踪关系(可能有多个追踪关系) 1.4 当前分支只有一个追踪关系 1.5 ...
Git 高级用法，喜欢就拿去用！
如果你觉得 git 很迷惑人,那么这份小抄正是为你准备的! 请注意我有意跳过了 git commit.git pull/push 之类的基本命令,这份小抄的主题是 git 的一些「高级」用法. 导航 ...
Git 高级用法小抄
点击上方蓝色字体,选择"标星公众号" 优质文章,第一时间送达作者 : Maxence Poutord 原文: New Frontend 网站如果你觉得 git 很迷惑人,那么 ...

git push用法

git push用法相关推荐

最新文章

热门文章