@[TOC](wfb-ng Release 23.01镜像无头烧录&配置(1))

最近打算搭一个数字图传系统，并进行一些简单测试，在刚开始烧录阶段就遇到各种问题。

当然，主要的问题就是不熟悉，经过几天的摸索和学习，记录下一路遇到的问题，将问题圆满的解决将会是产品化的细化内容。

1. 源由

基于开源树莓派硬件和wfb-ng开源软件，搭建一套数字图传系统，进行简单视频测试。

2. 需求

从源由的角度，我们这里如下技术需求：

硬件配置：树莓派 + 摄像头 – 笔记本电脑
软件配置：raspivid + wfb-ng + gstreamer1.0

3. 分析

鉴于wfb-ng目前已经提供镜像文件，因此安装将会非常方便，直接采用：

软件镜像：Release 23.01

4. 步骤

4.1 镜像安装&USB登录

请参考Raspbian镜像无头烧录，将固件Release 23.01刷写到tf卡

注：无需配置无线2.4G WiFi登录，将在后续优化配置时进行调整。

4.2 配置RNDIS-ethernet bridge更新镜像

更新apt库

pi@raspberrypi:~ $ sudo apt-get update
Get:1 http://archive.raspberrypi.org/debian bullseye InRelease [23.6 kB]
Get:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease [15.0 kB]
Get:3 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages [13.                                                                                       2 MB]
Get:4 http://archive.raspberrypi.org/debian bullseye/main armhf Packages [315 kB                                                                              ]
Get:5 http://archive.raspberrypi.org/debian bullseye/main armhf Contents (deb) [1,314 kB]
Get:6 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Contents (deb) [41.3 MB]
Fetched 56.2 MB in 2min 13s (421 kB/s)
Reading package lists... Done

更新系统

pi@raspberrypi:~ $ sudo apt-get upgrade

如果更新存在问题，请使用下面命令

pi@raspberrypi:~ $ sudo apt-get upgrade --fix-broken
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Correcting dependencies... Done
Calculating upgrade... Done
The following packages were automatically installed and are no longer required:eject exfatprogs gdisk libatasmart4 libblockdev-crypto2 libblockdev-fs2 libblockdev-loop2 libblockdev-part-err2 libblockdev-part2 libblockdev-swap2libblockdev-utils2 libblockdev2 libgpgme11 libnl-route-3-200 libparted-fs-resize0 libpcsclite1 libudisks2-0 libvolume-key1
Use 'sudo apt autoremove' to remove them.
The following packages will be REMOVED:wpasupplicant
The following packages have been kept back:raspinfo
The following packages will be upgraded:base-files bind9-host bind9-libs bluez-firmware curl distro-info-data git git-man gtk-update-icon-cache libavcodec-dev libavcodec58 libavformat-dev libavformat58libavutil-dev libavutil56 libbluray2 libcamera-apps-lite libcamera0 libcurl3-gnutls libcurl4 libde265-0 libegl-mesa0 libgbm1 libgl1-mesa-dri libglapi-mesalibglx-mesa0 libgnutls30 libgtk-3-0 libgtk-3-bin libgtk-3-common libksba8 liblept5 libnftables1 libnss3 libopenexr-dev libopenexr25 libpq5 libraspberrypi-binlibraspberrypi-dev libraspberrypi-doc libraspberrypi0 libssl1.1 libswresample-dev libswresample3 libswscale-dev libswscale5 libtasn1-6 libtiff-dev libtiff5libtiffxx5 linux-libc-dev mesa-va-drivers mesa-vdpau-drivers mesa-vulkan-drivers nano nftables openssl raspberrypi-bootloader raspberrypi-kernelraspberrypi-kernel-headers raspi-config rpi-eeprom sudo tzdata vcdbg
65 upgraded, 0 newly installed, 1 to remove and 1 not upgraded.
1 not fully installed or removed.
Need to get 200 MB of archives.
After this operation, 2,336 kB of additional disk space will be used.
Do you want to continue? [Y/n] Y
Get:1 http://archive.raspberrypi.org/debian bullseye/main armhf libssl1.1 armhf 1.1.1n-0+deb11u4+rpt1 [1,293 kB]
Get:2 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf base-files armhf 11.1+rpi1+deb11u6 [70.4 kB]
Get:3 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf nftables armhf 0.9.8-3.1+deb11u1 [68.0 kB]
Get:5 http://archive.raspberrypi.org/debian bullseye/main armhf bluez-firmware all 1.2-4+rpt10 [200 kB]
Get:6 http://archive.raspberrypi.org/debian bullseye/main armhf gtk-update-icon-cache armhf 3.24.24-4+rpt12+deb11u2 [87.7 kB]
Get:7 http://archive.raspberrypi.org/debian bullseye/main armhf libavformat-dev armhf 7:4.3.5-0+deb11u1+rpt3 [1,817 kB]
Get:10 http://archive.raspberrypi.org/debian bullseye/main armhf libavcodec-dev armhf 7:4.3.5-0+deb11u1+rpt3 [10.3 MB]
Get:16 http://archive.raspberrypi.org/debian bullseye/main armhf libavformat58 armhf 7:4.3.5-0+deb11u1+rpt3 [1,570 kB]
Get:14 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf bind9-libs armhf 1:9.16.37-1~deb11u1 [1,271 kB]
Get:19 http://archive.raspberrypi.org/debian bullseye/main armhf libavcodec58 armhf 7:4.3.5-0+deb11u1+rpt3 [9,133 kB]
Get:4 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf libnftables1 armhf 0.9.8-3.1+deb11u1 [227 kB]
Get:8 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf libtasn1-6 armhf 4.16.0-2+deb11u1 [50.0 kB]
Get:9 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf libgnutls30 armhf 3.7.1-5+deb11u3 [1,269 kB]
Get:11 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf libksba8 armhf 1.5.0-3+deb11u2 [104 kB]
Get:15 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf bind9-host armhf 1:9.16.37-1~deb11u1 [307 kB]
Get:12 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf tzdata all 2021a-1+deb11u8 [284 kB]
Get:13 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf nano armhf 5.4-2+deb11u2 [625 kB]
Get:17 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf curl armhf 7.74.0-1.3+deb11u7 [258 kB]
Get:18 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf libcurl4 armhf 7.74.0-1.3+deb11u7 [310 kB]
Get:20 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf distro-info-data all 0.51+deb11u3 [7,812 B]
Get:21 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf git-man all 1:2.30.2-1+deb11u2 [1,828 kB]
Get:27 http://archive.raspberrypi.org/debian bullseye/main armhf libswresample-dev armhf 7:4.3.5-0+deb11u1+rpt3 [131 kB]
Get:28 http://archive.raspberrypi.org/debian bullseye/main armhf libswresample3 armhf 7:4.3.5-0+deb11u1+rpt3 [121 kB]
Get:30 http://archive.raspberrypi.org/debian bullseye/main armhf libswscale-dev armhf 7:4.3.5-0+deb11u1+rpt3 [278 kB]
Get:31 http://archive.raspberrypi.org/debian bullseye/main armhf libavutil-dev armhf 7:4.3.5-0+deb11u1+rpt3 [604 kB]
Get:32 http://archive.raspberrypi.org/debian bullseye/main armhf libswscale5 armhf 7:4.3.5-0+deb11u1+rpt3 [261 kB]
Get:33 http://archive.raspberrypi.org/debian bullseye/main armhf libavutil56 armhf 7:4.3.5-0+deb11u1+rpt3 [464 kB]
Get:34 http://archive.raspberrypi.org/debian bullseye/main armhf libraspberrypi-bin armhf 1:2+git20220616~133208+6e8f786-1 [147 kB]
Get:35 http://archive.raspberrypi.org/debian bullseye/main armhf libraspberrypi-dev armhf 1:2+git20220616~133208+6e8f786-1 [177 kB]
Get:36 http://archive.raspberrypi.org/debian bullseye/main armhf raspberrypi-kernel armhf 1:1.20230106-1 [99.1 MB]
Get:22 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf libcurl3-gnutls armhf 7.74.0-1.3+deb11u7 [306 kB]
Get:23 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf git armhf
... bla bla... bla ... bla. ...
Removing 'diversion of /boot/start4cd.elf to /usr/share/rpikernelhack/start4cd.elf by rpikernelhack'
Removing 'diversion of /boot/start4db.elf to /usr/share/rpikernelhack/start4db.elf by rpikernelhack'
Removing 'diversion of /boot/start4x.elf to /usr/share/rpikernelhack/start4x.elf by rpikernelhack'
Removing 'diversion of /boot/fixup4.dat to /usr/share/rpikernelhack/fixup4.dat by rpikernelhack'
Removing 'diversion of /boot/fixup4cd.dat to /usr/share/rpikernelhack/fixup4cd.dat by rpikernelhack'
Removing 'diversion of /boot/fixup4db.dat to /usr/share/rpikernelhack/fixup4db.dat by rpikernelhack'
Removing 'diversion of /boot/fixup4x.dat to /usr/share/rpikernelhack/fixup4x.dat by rpikernelhack'
Removing 'diversion of /boot/LICENCE.broadcom to /usr/share/rpikernelhack/LICENCE.broadcom by rpikernelhack'
Setting up libglapi-mesa:armhf (20.3.5-1+rpt5+rpi1) ...
Setting up libraspberrypi0:armhf (1:2+git20220616~133208+6e8f786-1) ...
Setting up nano (5.4-2+deb11u2) ...
Setting up libcurl4:armhf (7.74.0-1.3+deb11u7) ...
Setting up git-man (1:2.30.2-1+deb11u2) ...
Setting up libswscale5:armhf (7:4.3.5-0+deb11u1+rpt3) ...
Setting up libtiff5:armhf (4.2.0-1+deb11u4) ...
Setting up curl (7.74.0-1.3+deb11u7) ...
Setting up mesa-va-drivers:armhf (20.3.5-1+rpt5+rpi1) ...
Setting up libcamera0:armhf (0~git20230302+923f5d70-1) ...
Setting up libbluray2:armhf (1:1.2.1-4+deb11u2) ...
Setting up libde265-0:armhf (1.0.11-0+deb11u1+rpi1) ...
Setting up bind9-host (1:9.16.37-1~deb11u1) ...
Setting up openssl (1.1.1n-0+deb11u4+rpt1) ...
Setting up raspi-config (20230214) ...
Installing new version of config file /etc/init.d/raspi-config ...
Setting up libgtk-3-common (3.24.24-4+rpt12+deb11u2) ...
Setting up libtiffxx5:armhf (4.2.0-1+deb11u4) ...
Setting up vcdbg (1:1.20230106-1) ...
Setting up libavutil-dev:armhf (7:4.3.5-0+deb11u1+rpt3) ...
Setting up libgl1-mesa-dri:armhf (20.3.5-1+rpt5+rpi1) ...
Setting up libswresample3:armhf (7:4.3.5-0+deb11u1+rpt3) ...
Setting up libraspberrypi-bin (1:2+git20220616~133208+6e8f786-1) ...
Setting up liblept5:armhf (1.79.0-1.1+deb11u1) ...
Setting up libegl-mesa0:armhf (20.3.5-1+rpt5+rpi1) ...
Setting up libtiff-dev:armhf (4.2.0-1+deb11u4) ...
Setting up libswscale-dev:armhf (7:4.3.5-0+deb11u1+rpt3) ...
Setting up git (1:2.30.2-1+deb11u2) ...
Setting up libraspberrypi-dev (1:2+git20220616~133208+6e8f786-1) ...
Setting up libcamera-apps-lite (0~git20230301+54a781d-1) ...
Setting up rpi-eeprom (16.0-1) ...
Setting up libavcodec58:armhf (7:4.3.5-0+deb11u1+rpt3) ...
Setting up libglx-mesa0:armhf (20.3.5-1+rpt5+rpi1) ...
Setting up libswresample-dev:armhf (7:4.3.5-0+deb11u1+rpt3) ...
Setting up libavformat58:armhf (7:4.3.5-0+deb11u1+rpt3) ...
Setting up libavcodec-dev:armhf (7:4.3.5-0+deb11u1+rpt3) ...
Setting up libavformat-dev:armhf (7:4.3.5-0+deb11u1+rpt3) ...
Setting up libraspberrypi-doc (1:2+git20220616~133208+6e8f786-1) ...
Processing triggers for man-db (2.9.4-2) ...
Processing triggers for dbus (1.12.24-0+deb11u1) ...
Processing triggers for install-info (6.7.0.dfsg.2-6) ...
Processing triggers for libglib2.0-0:armhf (2.66.8-1) ...
Setting up libgtk-3-0:armhf (3.24.24-4+rpt12+deb11u2) ...
Processing triggers for libc-bin (2.31-13+rpt2+rpi1+deb11u5) ...
Setting up libgtk-3-bin (3.24.24-4+rpt12+deb11u2) ...

4.3 安装wpasupplicant

pi@raspberrypi:~ $ sudo apt-get install wpasupplicant
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following packages were automatically installed and are no longer required:eject exfatprogs gdisk libatasmart4 libblockdev-crypto2 libblockdev-fs2 libblockdev-loop2 libblockdev-part-err2 libblockdev-part2 libblockdev-swap2libblockdev-utils2 libblockdev2 libgpgme11 libparted-fs-resize0 libudisks2-0 libvolume-key1
Use 'sudo apt autoremove' to remove them.
Suggested packages:wpagui libengine-pkcs11-openssl
The following NEW packages will be installed:wpasupplicant
0 upgraded, 1 newly installed, 0 to remove and 1 not upgraded.
Need to get 1,027 kB of archives.
After this operation, 2,828 kB of additional disk space will be used.
Get:1 http://mirrors.zju.edu.cn/raspbian/raspbian bullseye/main armhf wpasupplicant armhf 2:2.9.0-21 [1,027 kB]
Fetched 1,027 kB in 3s (358 kB/s)
Selecting previously unselected package wpasupplicant.
(Reading database ... 121066 files and directories currently installed.)
Preparing to unpack .../wpasupplicant_2%3a2.9.0-21_armhf.deb ...
Unpacking wpasupplicant (2:2.9.0-21) ...
Setting up wpasupplicant (2:2.9.0-21) ...
wpa_supplicant.service is a disabled or a static unit not running, not starting it.
Processing triggers for man-db (2.9.4-2) ...
Processing triggers for dbus (1.12.24-0+deb11u1) ...

4.4 优化WiFi配置

将Raspberry Pi Zero W默认wifi网卡去掉屏蔽

pi@raspberrypi:~ $ sudo nano /etc/modprobe.d/blacklist-rtl8xxxu.conf
pi@raspberrypi:~ $ cat /etc/modprobe.d/blacklist-rtl8xxxu.conf
#blacklist brcmfmac
blacklist rtl8xxxu

配置wpa无线路由账号密码

pi@raspberrypi:~ $ sudo nano /etc/wpa_supplicant/wpa_supplicant-wlan0.conf
pi@raspberrypi:~ $ cat /etc/wpa_supplicant/wpa_supplicant-wlan0.conf
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
country=CNnetwork={ssid="your-network-ssid"psk="your-network-password"
}

修改**【Raspberry Pi 3b+】**网络接口定义

pi@raspberrypi:~ $ sudo nano /etc/network/interfaces
pi@raspberrypi:~ $ cat /etc/network/interfaces
# interfaces(5) file used by ifup(8) and ifdown(8)
# Include files from /etc/network/interfaces.d:
source /etc/network/interfaces.d/*auto lo
iface lo inet loopbackauto eth0
iface eth0 inet dhcpauto wlan0
iface wlan0 inet dhcp
wpa-conf /etc/wpa_supplicant/wpa_supplicant-wlan0.conf
iface default inet dhcp

修改**【Raspberry Pi Zero W】**网络接口定义

pi@raspberrypi:~ $ sudo nano /etc/network/interfaces
pi@raspberrypi:~ $ cat /etc/network/interfaces
# interfaces(5) file used by ifup(8) and ifdown(8)
# Include files from /etc/network/interfaces.d:
source /etc/network/interfaces.d/*auto lo
iface lo inet loopbackauto wlan0
iface wlan0 inet dhcp
wpa-conf /etc/wpa_supplicant/wpa_supplicant-wlan0.conf
iface default inet dhcp

然后重启树莓派

pi@raspberrypi:~ $ sudo reboot

4.5 调整wfb-ng天空端配置

配置key
调整频段
配置参数
锁定WiFi接口

注：详见Setup-HOWTO

5. 补充资料修改hostname

WiFi本地网络内部存在两个相同hostname的设备，会出现一些异常问题。鉴于天空端和地面端都采用了同一个镜像，所以配置时需要做下区分。

5.1 raspi-config弹出对话框

pi@raspberrypi:~ $ sudo raspi-config

5.2 选择Hostname

5.3 Hostname命名规则

5.4 命名地面端和天空端

5.5 配置完成重启

6. 补充资料天空端完整步骤整理

本文主要介绍了如何天空端入门步骤，比如：ssh/wifi。wfb_ng的配置未进行详细的描述，这部分内容将在wfb-ng Release 23.01镜像无头烧录&配置(2)介绍，其中也会涉及绑定WiFi图传硬件的方法。

7. 参考资料

【1】Raspbian镜像无头烧录
【2】7 Ways to Disable Wi-Fi on Raspberry P (Lite/Desktop)
【3】How to automatically connect to Wifi on boot for Pi2?
【4】which path do you use for connecting Raspberry pi zero w? #285
【5】How to Setup Bridge Connections on Windows 10
【6】Changing the hostname of your Raspberry Pi using the terminal
【7】wfb-ng 锁定WiFi接口
【8】wfb-ng Release 23.01镜像无头烧录&配置(2)

wfb-ng Release 23.01镜像无头烧录配置(1)相关推荐

FPV Camera(RPI 3B+/Zero W+V2.1) | wfb_ng Release 23.01 | H264硬解测试
@[TOC](FPV Camera(RPI 3B+/Zero W+V2.1) | wfb_ng Release 23.01 | H264硬解测试) 1. 源由 RPI Zero W基于Release ...
FPV Camera(RPI3+V2.1) | wfb_ng Release 23.01 | Ubuntu 20.04 xfce软解测试
@[TOC](FPV Camera(RPI3+V2.1) | wfb_ng Release 23.01 | Ubuntu 20.04 xfce软解测试) 1. 简介与其他Linux桌面系统相比,Xf ...
FPV Camera(RPI3+V2.1) | wfb_ng Release 23.01 | ubuntu20.04 gnome软解测试
@[TOC](FPV Camera(RPI3+V2.1) | wfb_ng Release 23.01 | ubuntu20.04 gnome软解测试) 1. 简介最近搭建了基于树莓派和wfb_ng ...
Raspbian镜像无头烧录
Raspbian镜像无头烧录 1. 源由 2. 需求 3. 分析 4. 步骤 4.1 删除tf卡分区内容 4.2 balena烧录镜像 4.3 配置USB直接登录 4.4 配置WiFi 2.4G网络登 ...
分享Kali Linux 2017年第23周镜像文件
分享Kali Linux 2017年第23周镜像文件 Kali Linux官方于6月4日发布2017年的第23周镜像.这次维持了11个镜像文件的规模.默认的Gnome桌面的4个镜像,E17.KDE. ...
TImage、TPaintBox、TPicture、TBitmap、TCanvas、TGraphic 的关系与区别作者：万一来源：博客园发布时间：2009-01-09 23:01
TImage.TPaintBox.TPicture.TBitmap.TCanvas.TGraphic 的关系与区别作者:万一来源:博客园发布时间:2009-01-09 23:01 阅读:3 ...
jetson nano 烧录、更换镜像源、配置xrdp、安装Archiconda、配置CUDA、安装pytorch环境一条龙服务
jetson nano 烧录.更换镜像源.配置xrdp.安装Archiconda.配置CUDA.安装torch环境一条龙服务一.jetson nano烧录 1.jetson nano上电 2.镜像烧 ...
添加163镜像为linux yum源,163镜像yum源配置----centos7
163镜像yum源配置 1.首先 rm -rf /etc/yum.repos.d/* 2.yum clean all 3.配置 vim /etc/yum.repos.d/163.repo 内容如下: ...
docker中linux用户名密码,linuxea:尽可能不在docker镜像中嵌入配置或者密码
切勿将配置或机密信息嵌入Docker镜像中.相反,在构建Docker镜像时,期望使用业务流程运行时将配置和机密的信息提供给容器,这些包含:Kubernetes Secrets,Docker Secre ...

wfb-ng Release 23.01镜像无头烧录配置(1)

1. 源由

2. 需求

3. 分析

4. 步骤

4.1 镜像安装&USB登录

4.2 配置RNDIS-ethernet bridge更新镜像

4.3 安装wpasupplicant

4.4 优化WiFi配置

4.5 调整wfb-ng天空端配置

5. 补充资料修改hostname

5.1 raspi-config弹出对话框

5.2 选择Hostname

5.3 Hostname命名规则

5.4 命名地面端和天空端

5.5 配置完成重启

6. 补充资料天空端完整步骤整理

7. 参考资料

wfb-ng Release 23.01镜像无头烧录配置(1)相关推荐

最新文章

热门文章

wfb-ng Release 23.01镜像无头烧录配置(1)

1. 源由

2. 需求

3. 分析

4. 步骤

4.1 镜像安装&USB登录

4.2 配置RNDIS-ethernet bridge更新镜像

4.3 安装wpasupplicant

4.4 优化WiFi配置

4.5 调整wfb-ng天空端配置

5. 补充资料 修改hostname

5.1 raspi-config弹出对话框

5.2 选择Hostname

5.3 Hostname命名规则

5.4 命名地面端和天空端

5.5 配置完成重启

6. 补充资料 天空端完整步骤整理

7. 参考资料

wfb-ng Release 23.01镜像无头烧录配置(1)相关推荐

最新文章

热门文章

5. 补充资料修改hostname

6. 补充资料天空端完整步骤整理