tcl脚本vsim命令的参数列表
2024-06-03 21:23:18
打开modelsim，在底部输入命令：vsim -help，能够打印相关的命令
# Usage: vsim [options] [[<library>.]<primary>[(<secondary>)]]...
# -default_radix radix|radix_flag[,radix_flag...] Set default radix and radix flags.
# Specifying just a radix will clear all radix flags. Specifying
# just radix flags will set the flags but leave the default radix unchanged.
# -help Print this message
# -version Print the version of the simulator
# -32 Run in 32-bit mode
# -64 Run in 64-bit mode
# <library_name>.<design_unit>
# Specifies a library and associated design unit; multiple library/design unit
# specifications can be made. If no library is specified, the work library is
# used.
# --------------------------- VHDL and Verilog options ---------------------------
# -assertcover Keep assertion counts for coverage statistics
# -assertdebug Keep data for debugging assertion failures
# -assertfile <filename> Alternative file for recording assert messages
# -msgfile <filename> Alternative file for recording non-assert messages
# -assume Simulate PSL and Verilog assume directives same as assert directives
# -autoexclusionsdisable=fsm|assertions|all|none
# Turns on/off automatic fsm or assertions code coverage exclusions
# -autoprofile[=<profile_database>]
# Automatically collect profile data without requiring the use of profile
# commands. Specifying a profile database name is optional
# -attemptedimmedcovers Exclude unattempted immediate covers to participate in coverage calculations
# -batch Batch mode
# -c Command line mode
# -capacity Enable fine grain capacity analysis
# -colormap new Specifies that the window should have a new private colormap instead of
# using the default colormap for the screen.
# -compress_elab In conjunction with -elab, enables compression of
# the elab file
# -codelink=<path> Specify the path to CODELINK_HOME directory
# -nocodelink Ignore the CODELINK_HOME environment variable and
# disable codelink loading.
# -coverage Allows enabled coverage statistics to be kept
# -coverenhanced Enables functionality which may change the appearance or content of coverage
# metrics. A detailed list of these changes can be found by searching in the
# release notes for 'coverenhanced'. This option only takes meaningful effect in
# letter releases (e.g. 10.2b). It has no effect in initial major releases (e.g. 10.2).
# -covercountnone Disables the default behavior to increment the count of all matching rows in
# condition and expression coverage UDP tables. Has no effect on FEC coverage.
# -coverstore <path> Specifies the path where coverage data will be dumped during exit
# of a simulation run. The -testname argument is required for this
# option to specify a testname for the current simulation run.
# -do "<command>" Execute <command> on startup; <command> can be
# a macro filename
# -display <display-spec> Specifies the name of the display to use.
# Does not apply to Windows platforms.
# -displaymsgmode <mode> Controls transcripting of display system task messages.
# Messages will appear in transcript and/or MsgViewer (.wlf file)
# Valid modes - tran, wlf, both (Default: tran)
# +delayed_timing_checks Causes timing checks to be performed on the delayed versions of input ports
# +dumpports+direction Provide port direction info in VCD file for dumpports
# +dumpports+unique Provide unique Extended VCD identifier for each port
# +dumpports+no_strength_range
# Ignore strength range when resolving conflicts
# +dumpports+collapse Collapse dumpport vectors into single VCD ids
# +dumpports+nocollapse Don't collapse dumpport vectors into single VCD ids
# +dumpports+force_direction
# Ignore driver location. Use port direction for input and output ports
# -elab <filename> Elaborate a design into a file
# -elab_cont <filename> Elaborate a design into a file and simulate
# -elab_defer_fli Defer calling FLI initialization routines
# -error <msgNumber>[,<msgNumber>...] Change the severity of the listed
# messages to Error
# -f <filename> Read command line arguments from <filename>
# -optionset <optionset_name>
# Calls an option set in modelsim.ini.
# -fatal <msgNumber>[,<msgNumber>...] Change the severity of the listed
# messages to Fatal
# -feccountlimit [<n> | 0 ] Limits the number of counts that are tracked for
# Focused Expression Coverage.
# -filemap_elab <HDLfilename>=<NEWfilename>
# Define a mapping used during -load_elab
# -fsmdebug Enables visualization of FSMs in the GUI.
# -g<Name>=<Value> Specify generic/parameter default Value for Name
# -g <Name>=<Value> Alternate way to specify generic/parameter default Value for Name
# -G<Name>=<Value> Override generic/parameter with specified Value
# -G <Name>=<Value> Alternate way to override generic/parameter with specified Value
# -geometry <geometry_spec> Specifies the size and location of the main window.
# Where <geometry_spec> is of the form: WxH+X+Y
# -gui Open the GUI without loading a design
# -i Force interactive mode
# -ignoreinilibs Ignore the libraries specified with the 'LibrarySearchPath' variable in the vsim
# section of the ini file
# -immedassert Enable SystemVerilog and VHDL immediate assertions
# -infacthome <path> Location of inFact installation.
# Overrides 'InFactHome' modelsim.ini setting
# -keeploaded Prevent the simulator from unloading/reloading
# shared libraries
# -keeploadedrestart Prevent the simulator from unloading/reloading
# shared libraries during restart
# -keepstdout Do not redirect stdout to transcript window
# -l <filename> Write simulation log to <filename>
# (Default: transcript)
# -learn <fname> Learn the names of objects externally accessed at runtime
# (by methods such as PLI, VPI, Signal Spy, or CLI).
# <fname>.ocf, <fname>.ocm and <fname>.acc files created
# -lib <libname> Load top-level design units from <libname>
# (Default: work)
# -lic_nomti Do not look for Model Technology Licenses
# -lic_noqueue Do not wait in the license queue when a license
# is not available
# -lic_plus Immediately reserve a VHDL and Verilog license
# -lic_vhdl Immediately reserve a VHDL license
# -lic_vlog Immediately reserve a Verilog license
# -lic_no_slvhdl Disable checkout of qhsimvh and vsim single
# language VHDL license features
# -lic_no_slvlog Disable checkout of qhsimvl and vsimvlog
# single language Verilog license features
# -lic_no_mix Disable checkout of msimhdlmix and hdlmix
# second language only license features
# -lic_no_lnl Disable checkout of msimhdlsim and hdlsim
# language neutral license features
# -lic_mixed_only Disable checkout of qhsimvh,qhsimvl,vsim,
# vsimvlog single language license features
# -lic_lnl_only Disable checkout of qhsimvh,qhsimvl,vsim,
# vsimvlog,msimhdlmix,hdlmix license features
# -load_elab <filename> Load simulation from previous elaboration
# -logfile <filename> Write simulation log to <filename>
# (Default: transcript)
# -memprof Collect memory allocation profile data for use with
# current simulation
# -memprof+call Unwinds the call stack and collects the call tree information.
# -memprof[+file=<filename>]
# Collect memory allocation profile data for use with
# current simulation and copy raw data to <filename>
# -memprof[+fileonly=<filename>]
# Collect memory allocation profile data in raw format
# to <filename>
# -modelsimini <modelsim.ini>
# Specify path to the modelsim.ini file
# -mlopt Optimize mixed language nets
# -multisource_delay min|max|latest
# Controls annotation of SDF INTERCONNECT construct
# (Default: max)
# +multisource_int_delays Enable multisource interconnect delays
# for both Verilog and VHDL
# -msglimit [all,|none,][-|+]<msgNumber>[,[-|+]<msgNumber>...]
# Limit the listed messages to display five times
# -msglimitcount <limit_value> -msglimit [all,|none,][-|+]<msgNumber>[,[-|+]<msgNumber>...]
# Limit the reporting of listed messages to user defined count
# -msgmode <mode> Controls transcripting of elaboration/runtime messages.
# Messages will appear in transcript and/or MsgViewer (.wlf file)
# Valid modes - tran, wlf, both (Default: tran)
# -multicount <covtypes> Specifies the single-bit or multi-bit count modes for bins of
# different coverage types
# -mvchome <path> Location of Questa Verification IP installation.
# Overrides 'MvcHome' modelsim.ini setting
# -name <name> Specifies the application name used by the interpreter for send commands.
# -nocompress Create/restore uncompressed checkpoint file
# -nocoverage Passed to vopt to turn off code coverage compile options
# +no_notifier Disable notifier toggling for timing constraint
# violations
# -noappendclose Do not physically close VHDL files when they are opened in append mode.
# -noassertcover Do not keep assertion counts for coverage statistics
# -noassertdebug Do not keep data for debugging assertion failures
# -noassume Do not simulate PSL and Verilog assume directives
# -nocapacity Do not display capacity related information
# -noexcludehiz Do not automatically exclude rows with Hi-Z for
# expression coverage
# -noexcludeternary Disables the automatic exclusion of UCDB coverage data rows resulting
# from ternary expressions for the entire design.
# -nolog Do not generate a simulation log file
# -nopsl Disable PSL assertions
# -nostdout Do not write transcript to stdout (batch mode only)
# +no_tchk_msg Disable timing constraint error messages
# -note <msgNumber>[,<msgNumber>...] Change the severity of the listed
# messages to Note
# +notimingchecks Disable Verilog and VITAL timing checks
# -novhdlvariablelogging Disables higher performance VHDL variable logging
# -nosyncio Disables synchronization of I/O from different
# sources like C/C++ application(PLI,VPI,DPI)
# and GUI. vsim will perform better when it does
# not have to synchronize I/Os. This option is on
# by default with -batch
# -novopt Force incremental mode (pre-6.0 behavior)
# -nowiremodelforce Restores the force command to previous usage (prior to version 10.0b)
# where an input port cannot be forced directly if it is mapped at a
# higher level in VHDL and mixed models. Signals must be forced at the
# top of the hierarchy connected to the input port.
# -onfinish <mode> Customize the kernel shutdown behavior at the end of simulation
# Valid modes - ask, stop, exit, final (Default: ask)
# -pduignore[=<instpath>] Ignore Preoptimized Design Unit.
# If optional <instpath> is not specified all PDUs found in
# compiled libraries will be ignored. Otherwise the PDU
# specified by <instpath> will be ignored. This option may
# be specified multiple times with different <instpath>s.
# (Equivalent to the deprecated "-ignore_bbox" option).
# -pa Enable PowerAware RTL mode
# -pa_allowtimezeroevent[=all]
# Enable corruption, isolation, or release of signals at time 0 for
# the following events: pa_corrupt_register, pa_iso_on and pa_iso_off.
# -pa_debugdir <directory> Specify the location for the writing and retrieval of post-simulation
# debug information for power aware simulations.
# -pa_disabletimezeroevent Disable the default behavior of the -pa_allowtimezeroevent switch.
# -pa_gls <testbench_top> Enables gate-level simulation for Power Aware, performed on the
# top-of-design test bench (testbench_top).
# -pa_highlight Enables visual indication (highlighting) of power states of signals viewed
# in the Wave window.
# -pa_lib <libname> Use PA specific dumps from <libname> library. (Default: work)
# -pa_togglelimit=<n> Instructs vsim to discontinue reporting an error (8906) for each signal
# that toggles during power off and issue note (8922) instead.
# The default value is 5.
# -pa_top <dut path> Allow vsim to use different top level hierarchy for PA
# (Example: -pa_top /tb2/dut_inst
# -pa_zcorrupt Change the default corruption value used at power-down from 'X' to 'Z'.
# -debugdb[=<dbname>] To create or use Schematic Debug database (Default: vsim.dbg)
# -postsimdataflow Needed with -debugdb, to enable post simulation dataflow
# -pedanticerrors Enforce strict language checks
# -permissive Relax some language error checks to warnings.
# -printsimstats[=[val][v]] Print simstats results
# Possible values: 0 - disable simstats, 1 - end of simulation(default)
# 2 - end of each run command and simulation, v - verbose stats
# -psl Enable PSL assertions
# -psloneattempt Force single PSL assertion coverage attempt
# -pslinfinitythreshold Redefine infinite clock tick for strong operators
# -quiet Do not report 'Loading...' messages
# -qwavedb=<options>... Use qwavedb to log event data in place of wlf
# -restore <filename> Restore simulation from previous checkpoint
# -runinit Execute run -init before command prompt or running -do files.
# -sdfmax[@<delayScale>] [<instance>=]<sdffile>
# Annotate VITAL or Verilog <instance> with maximum
# timing from <sdffile>, scaled by <delayScale>
# -sdfmaxerrors <n> Max number of missing instances reported (default is 5)
# -sdfmin[@<delayScale>] [<instance>=]<sdffile>
# Annotate VITAL or Verilog <instance> with minimum
# timing from <sdffile>, scaled by <delayScale>
# -sdfminr[@<delayScale>] [<instance>=]<sdffile>
# Specifies when an instance of a Preoptimized Design Unit
# (vopt -pdu) with an associated default SDF
# file is to be re-annotated with minimum, typical, or
# maximum timing from the specified SDF file.
# -sdfnoerror Treat SDF errors as warnings
# -sdfnowarn Disable warnings from SDF annotator
# -sdfreport=<fileName> Report unannotated/partially-annotated specify objects into <fileName>
# +sdf_report_unannotated_insts Enable error messages for any un-annotated Verilog instances with
# specify blocks or VHDL instances with VITAL timing generics that are under
# regions of SDF annotation.
# -sdftyp[@<delayScale>] [<instance>=]<sdffile>
# Annotate VITAL or Verilog <instance> with typical
# timing from <sdffile>, scaled by <delayScale>
# +sdf_verbose Display SDF annotator status messages
# -showautoexcludprows Display auto-excluded UDP rows of table, in expression coverage
# -showlibsearchpath Show all the libraries which will be searched for precompiled modules
# -suppress <msgNumber>[,<msgNumber>...] Suppress the listed messages
# -stats[=[+-]<args>] Enables simulation statistics
# <args> are all,none,time,cmd,msg,perf,verbose,list,kb,eor
# -sync Executes all X server commands synchronously, so that errors are reported
# immediately. Does not apply to Windows platforms.
# -syncio Enable I/O synchronization with -batch option
# where I/O synchronization is disabled by default
# for optimal performance.
# -undefsyms=[<args>] Generate stubs for undefined symbols in the shared libraries being loaded
# <args> are on, off, verbose
# -t [1|10|100]fs|ps|ns|us|ms|sec Time resolution limit
# (VHDL default: resolution setting from .ini file)
# (Verilog default: minimum time_precision in the
# design)
# -tag <string> Set tag for FLI/PLI tracing to <string>
# -notoggleints Excludes VHDL integers from toggle coverage
# -testname <name> Specifies a testname for the current simulation run. Required
# only when coverage data is saved in a coverstore.
# -togglemaxintvalues Sets max number of values saved for VHDL integers
# -togglemaxrealvalues Sets max number of values saved for SystemVerilog reals
# -togglemaxfixedsizearray <size>
# Sets the limit on the size of Verilog unpacked fixed-size arrays
# that are included for toggle coverage
# -togglecountlimit Sets max count saved for a toggle node
# -togglewidthlimit Sets max width for vectors counted for toggles
# -togglevlogreal Includes Verilog real type in toggle coverage
# -togglefixedsizearray Includes Verilog unpacked fixed-size arrays, VHDL multi-d arrays and VHDL arrays-of-arrays in toggle coverage
# -togglevlogints Includes Verilog integers for toggle coverage
# -togglevhdlrecords Includes VHDL records for toggle coverage
# -notogglevlogints Excludes Verilog integers from toggle coverage
# -notogglevlogreal Excludes Verilog real type in toggle coverage
# -notogglefixedsizearray Excludes Verilog unpacked fixed-size arrays, VHDL multi-d arrays and VHDL arrays-of-arrays in toggle coverage
# -notogglevhdlrecords Excludes VHDL records from toggle coverage
# -nowlfdeleteonquit Preserve the current simulation WLF file (vsim.wlf) when the simulator exits.
# -togglepackedasvec Treat SystemVerilog packed structures and multi-d arrays as flattened vectors
# -togglevlogenumbits Treat SystemVerilog enums as reg-vectors for toggle coverage
# -extendedtogglemode [1|2|3]
# Change the level of support for extended toggles.
# The levels of support are:
# 1 - 0L->1H & 1H->0L & any one 'Z' transition (to/from 'Z')
# 2 - 0L->1H & 1H->0L & one transition to 'Z' & one transition from 'Z'
# 3 - 0L->1H & 1H->0L & all 'Z' transitions
# -toggleportsonly Enable toggle statistics collection only for ports
# -toggledeglitch <period> Enable toggle deglitching. Require signal stable longer than period value
# <period> must be a time value with units
# -title <string> Optional title for the Main window
# -trace_dpi <n> Set DPI tracing to level <n>. The default is 0 which turns off tracing.
# The levels of support are:
# 1 - turning on all tracing
# 0 - turning off all tracing (default)
# i - turning on the tracing of DPI import call only
# e - turning on the tracing of DPI export call only
# a - turning on the tracing of DPI import/export call arguments only
# -trace_foreign <n> Set FLI/PLI tracing to level <n>
# -ucdbteststatusmsgfilter <TCL style regular expression>
# Matching messages do not propagate their status to UCDB TESTSTATUS
# -unattemptedimmed Include immediate assertions to participate in assertion coverage calculations
# -vcdstim [<instance>=]<filename> Stimulate the top-level design or instances
# from an Extended VCD file
# -vhdlmergepdupackage VHDL packages with the same name and same library are shared between PDUs
# -vhdlseparatepdupackage VHDL packages with the same name and same library are not shared between PDUs
# -vhdlvariablelogging Enables higher performance VHDL variable logging
# -visual <visual> Specify the visual to use for the window. Does not apply to Windows platforms.
# -visualizer[=<bin-file><visualizer-options>...] Visualizer interactive mode
# -view [<dataset>=]<filename> View the contents of a WLF file
# -viewcov [<dataset>=]<ucdbfilename> View the contents of the coverage ucdb file
# -vopt Run vopt optimization before elaborating the simulator
# -voptargs="<arglist>" Pass the specified arguments to vopt
# -vopt_verbose Display verbose informational messages
# -warning <msgNumber>[,<msgNumber>...] Change the severity of the listed
# messages to Warning
# -warning error Report all warnings as errors
# -wlf <filename> Specify the name of the WLF file (Default: vsim.wlf)
# -wlfcompress Create compressed WLF files.
# -wlflock Lock a WLF file.
# -wlfopt Turn on WLF file optimizations (default)
# -nowlfopt Turn off WLF file optimizations
# -nowlfcompress Turn off WLF file compression
# -nowlflock Turn off WLF file locking
# -wlfslim <size> Specify maximum number of Megabytes to be saved in
# WLF file (Default: infinite)
# -wlftlim <duration> Specify maximum duration of time to be saved in
# WLF file (Default: all)
# -wlfcachesize <n> Specify WLF reader cache size (per WLF file.)
# (Default: no reader cache)
# -wlfsimcachesize <n> Specify WLF reader cache size for current simulation
# (Default: no reader cache)
# -wlfdeleteonquit Delete WLF file when simulation quits.
# -nowlfcollapse Log every item event and preserve event order.
# -wlfcollapsedelta Log item values only at end of iteration. (default)
# -wlfcollapsetime Log item values only at end of time step.
# --------------------------------- VHDL options ---------------------------------
# -absentisempty Treat non-existent VHDL files opened for read
# as empty
# -accessobjdebug Enable access value designated object debug features.
# -defaultstdlogicinittoz Sets the default VHDL initialization of std_logic to "Z" (high impedance)
# for ports of type OUT and INOUT.
# -foreign "<C_init_func> <shared_lib>" Load a foreign module
# -nocollapse Disable optimization of internal port map connections
# -nofileshare Do not share file descriptors for VHDL files opened
# for write or append that have identical names
# -noglitch Disable VITAL glitch generation
# +no_glitch_msg Disable glitch error messages
# -oldvhdlforgennames Enable the use of a previous style of naming in VHDL for...generate
# statement iteration names in the design hierarchy.
# -stackcheck Enable runtime stack usage sanity checking.
# -std_input <filename> Use filename for VHDL textio STD_INPUT file
# -std_output <filename> Use filename for VHDL textio STD_OUTPUT file
# -strictvital Sacrifice performance for strict VITAL compliance
# -vcdread <filename> Stimulate the VHDL top-level design from a VCD file
# -vital2.2b Select SDF mapping for VITAL 2.2b (Default: VITAL 95)
# -vital_fix_negative_setup_hold_sum
# Set negative time to zero when setuphold sum is negative
# -------------------------------- Verilog options -------------------------------
# +alt_path_delays Use current output value instead of pending value
# when selecting inertial specify path output delay
# +bitblast[=[iopath|tcheck]] Bit-blast Verilog specify paths and/or tchecks with wide ports.
# Without the optional qualifiers operates on specify paths and tchecks.
# +bitblast=iopath bit-blasts specify paths with wide ports.
# +bitblast=tcheck bit-blasts tchecks with wide ports.
# -checkvifacedrivers 1|0 Include assignments through virtual interfaces in the multiple-driver analysis.
# -classdebug Enable class debug features.
# -nocvgcollapseembeddedinstances
# Turning off the optimization of collapsing embedded covergroup
# instances when type_option.merge_instances is set to zero.
# -cvgmaxrptrhscross Set the maximum cross bin BINRHS terms in coverage report.
# -cvgprecollect <ucdb_filename>
# Specify a UCDB file as optimization control for the current
# simulation. This switch can occur multiple times.
# -cvgprecollectlog <log_filename>
# Specify the path of the log file where the precollect processing information
# will be written to.
# -cvgperinstance Force the option.per_instance control in all covergroup declarations to 1.
# -cvgsingledefaultbin Collapse a Covergroup default array bin into a scalar bin
# -cvghaltillbin Halt simulation when an illegal cover/cross bin gets hit
# -cvgmergeinstances Set the default value of covergroup type_option.merge_instances to 1
# -cvgsparsecross Force modelling of Covergroup cross bins in a sparse fashion.
# -cvgsparsearraybin Force modelling of Covergroup unsize array bins in a sparse fashion.
# -cvgzwnocollect <1|0> Turn on/off the coverage data collection of zero-weight coverage items.
# -cvgbintstamp Record simulation timestamp when a covergroup bin is covered during simulation run
# -nocrossautobins Avoid generating auto bins in cross coverage computation.
# -dpicpppath </path/to/gcc> Specify desired GCC path for DPI compilation
# -dpicppinstall <[gcc|g++] version>
# Specify the version of the desired GNU compiler supported and
# distributed by Mentor for the DPI compilation
# -dpiexportcheckref (Deprecated) Check the staleness of exportwrapper source file generated previously.
# -dpiexportonly (Deprecated) Quit simulation after exportwrapper compilation. This is to support locked work library flow.
# -dpiexportobj <filename> (Deprecated) Generate specified DPI export object file then quit
# -dpilib <libname> Specify the library that contains DPI exports and object files
# -ldflags <linkopts> Specify in quotes the option for linking auto compiled DPI/PLI/VPI object files
# -dpiforceheader Force generation of dpi header file even when empty
# of function prototypes
# -dpiheader <filename> Generate specified DPI C header file
# -dpioutoftheblue 1|0 Turn on/off DPI out-of-the-blue call from C function
# -nodpiexports (Deprecated) Turn off the exportwrapper generation.
# -nodpimasking Turn off masking of unused bits of bit vectors from user C data.
# -enumfirstinit Initializes enum variables in SystemVerilog using the leftmost value as
# the default. Argument must be used with the vlog command in order to
# implement this initialization behavior. Specify the EnumBaseInit variable
# as 0 in the modelsim.ini file to set this as a permanent default.
# -extend_tcheck_data_limit <percent relaxation> Relax data limit for convergence
# -extend_tcheck_ref_limit <percent relaxation> Relax ref limit for convergence
# +autofindloop Find the infinite zero-delay loop when Iteration Limit is exceeded.
# This option should be used with full design visibility e.g. vopt +acc
# -hazards Enable hazard checking
# +initmem+<seed> Specify seed value to be used for randomizing
# fixed-size arrays marked for randomization by vlog/vopt.
# +initreg+<seed> Specify seed value to be used for randomizing
# variables marked for randomization by vlog/vopt.
# -initreport <filename> Report initial values generated due to
# applying +initreg/+initmem options to vlog/vopt
# +initregNBA | +noinitregNBA
# Controls whether +initreg settings applied to registers
# of sequential UDPs should be non-blocking. This is useful when continuous
# assignments overwrite register initialization.
# +initregNBA -- (default) enables this functionality
# +noinitregNBA -- disables this functionality.
# +int_delays Optimize annotation of interconnect delays
# -L <libname> Search library for design units instantiated from
# Verilog and for VHDL default component binding
# -Lf <libname> Same as -L, but libraries are searched before `uselib
# +maxdelays Use maximum timing from min:typ:max expressions
# +mindelays Use minimum timing from min:typ:max expressions
# +no_autodtc Turn off auto-detection of optimized cells with negative timing checks
# and autoapplication of +delayed_timing_checks to those cells.
# +no_cancelled_e_msg Disable negative pulse warning messages
# -noimmedca Revert to pre-6.5 continuous assignment event ordering
# +no_neg_tchk Set negative timing check limits to zero
# +no_path_edge Ignore the input edge specification on path delays
# +no_pulse_msg Disable path pulse error warning messages
# +nosdferror Treat SDF errors as warnings
# +nosdfwarn Disable warnings from SDF annotator
# +no_show_cancelled_e Cancel negative pulse (Default)
# +nospecify Disable specify path delays and timing checks
# +notiftoggle01[+<seed>] Use the metastable UDP evaluation of enabled Verilog cells in simulation.
# Default seed value is 0
# -no_autoacc Prevents vsim from automatically passing the +acc switch to vopt.
# -nosva Disable SystemVerilog concurrent assertions
# -noimmedassert Disable SystemVerilog and VHDL immediate assertions
# -nocvg Disable Covergroup object construction and builtin calls
# -nocvgmergeinstances Set the default value of covergroup type_option.merge_instances to 0
# -nocvgperinstance Force the option.per_instance control in all covergroup declarations to 0.
# -nocvgzwopt Enable sampling for zero weight covergroup items
# -no_risefall_delaynets Disables the rise/fall delay net delay negative timing check algorithm.
# +nowarnBSOB Disables run-time warning messages for bit-selects in initial blocks
# that are out of bounds
# +nowarn<CODE | Number> Disable specified warning message
# (Example: +nowarnTFMPC)
# +ntc_warn Enable warnings from negative timing constraint
# algorithm
# +ntcnotchks Disable timing checks while maintaining NTC delays
# -pli "<object list>" Load the list of PLI shared objects
# -plicompatdefault [latest | 2009 | 2005 | 2001]
# Specify the VPI object model behavior within vsim. This switch applies
# globally, not to individual libraries.
# +<plusarg> Option accessible by PLI routine mc_scan_plusargs
# +pulse_e/<percent> Set path pulse error limit as percentage of
# path delay
# +pulse_e_style_ondetect Drive pulse error state immediately on detection
# +pulse_e_style_onevent Drive pulse error state on time of pending event
# (Default)
# +pulse_int_e/<percent> Set interconnect pulse error limit as percentage
# of delay
# +pulse_int_r/<percent> Set interconnect pulse rejection limit as
# percentage of delay
# +pulse_r/<percent> Set path pulse rejection limit as percentage of
# path delay
# +sdf_iopath_to_prim_ok Prevent vsim from issuing an error when it cannot locate specify path
# delays to annotate
# +sdf_nocheck_celltype Disable check between SDF celltype name and
# module name
# +show_cancelled_e Drive pulse error state on negative pulse
# -solvebeforeerrorseverity=<value>
# Specify error message severity for suppressible errors that
# are detected in a solve/before constraint
# Valid values:
# 0 - no error
# 1 - warning
# 2 - error
# 3 - failure
# 4 - fatal
# -solveengine <engine> Use specified solver engine to evaluate randomize() scenarios
# Valid engines - auto, bdd, act
# -solvefaildebug[=value] Display constraint conflicts on randomize() failure
# Valid values:
# 0 - disable solvefaildebug
# 1 - basic debug (no performance penalty)
# 2 - enhanced debug (runtime performance penalty)
# If no value is specified, basic debug will be enabled.
# -solvefailtestcase[=filename]
# Upon encountering a randomize() failure, generate a
# simplified testcase that will reproduce the failure.
# Optionally output the testcase to the specified file.
# Testcases for 'no-solution' failures will only be
# produced if -solvefaildebug is enabled.
# -solveprofile Enable randomize() profiling (profile data included in solver report)
# -solverev <version> Specify random sequence compatibility with <version>
# (Example: -solverev 6.2a)
# -solveverbose Print information about randomize() call processing
# -sv_lib <shared_obj> DPI shared object, without extension
# -sv_root <dirname> Directory name to use as prefix for DPI
# shared object lookups
# -sv_liblist <filename> The name of a bootstrap file containing names
# of DPI shared objects to load
# -sv_seed <seed> Specify a seed for the Random Number Generator
# (RNG) of the root thread (SystemVerilog)
# -sva Enable SystemVerilog concurrent assertions
# -svext[=[+|-]<extension>[,[+|-]<extension>]*]
# Enable SystemVerilog language extensions.
# Valid extensions are:
# cfce - Generate an error if $cast fails as a function.
# fmtcap - prints hapital hex digits with %X/%H in display calls.
# -tab <filename> Specify PLI TAB file
# -tbxhvllint Enables TBX to identify delays encountered at runtime, with file name
# line number and the delay maturity time. (This feature depends on
# libraries that have been compiled with -tbxhvllint specified to vlog)
# +transport_int_delays Use transport mode for interconnect delays
# +transport_path_delays Use transport mode for path delays
# (Default: inertial)
# +typdelays Use typical timing from min:typ:max expressions
# (Default)
# -udpcountlimit [<n> | 0 ] Limit the number of counts that are tracked for UDP Coverage.
# -usenonstdcoveragesavesysf Replaces implementation of the built-in, IEEE 1800 compliant
# system function with the non-standard variant, and thus affects all
# calls to $coverage_save().
# -uvmcontrol=[all,disable,struct,msglog,trlog,certe]
# Control specific UVM-aware debug options (default: -uvmcontrol=struct)
# +vlog_retain_on | +vlog_retain_off
# Enable or disable SDF RETAIN delay processing.
# +vlog_retain_on is the default behavior.
# +vlog_retain_same2same_on | +vlog_retain_same2same_off
# Enable or disable SDF RETAIN delay processing of X insertion on outputs
# that do not change, but the causal inputs change.
# +vlog_retain_same2same_on is the default behavior.
# -v2k_int_delays Use Verilog 2000 style interconnect delays
# -wreal_resolution <resolver>[,check|,nocheck ]
# Specify resolve behavior for AMS wreal net
# with multiple drivers, where <resolver> is
# default, 4state, sum, avg, min, or max.
# check/nocheck determine if compatibility with
# nettype real resolution functions is to be checked.
# -wrealdefaultzero Sets the default value for an undriven wreal net to zero (0).
# -gconrun/-nogconrun Enable/disable garbage collection after each simulation run command.
# -gconstep/-nogconstep Enable/disable garbage collection after each step command.
# -gcthreshold <n> Specify the threshold for Garbage Collection.
# The default size is 100. (i.e. Garbage Collection will be
# triggered after every 100M byte of class object allocation.)
# -------------------------------- SystemC options -------------------------------
# -cpppath </path/to/[gcc|g++]>
# Specify path to the desired GNU compiler.
# Use same compiler path as specified on the sccom
# command line.
# -cppinstall <[gcc|g++] version>
# Specify the version of the desired GNU compiler
# supported and distributed by Mentor.
# Use same compiler path as specified on the sccom command line.
# -noautoldlibpath Disable setting of LD_LIBRARY_PATH set internally.
# -sc22 Use the IEEE 1666-2005 standard (default: IEEE 1666-2011).
# -sc_arg <arg> Specify a SystemC command line argument
# accessible using sc_main(), sc_argc() and
# sc_argv()
# -scdpidebug Turn on debugging for SystemC DPI export function call
# -sclib <libname> Load the SystemC shared library from <libname>
# By default the systemc.so shared library is loaded
# from the library in which the top level SystemC design
# unit is compiled. This option should be used when systemc.so
# is not in the same library as the top level SystemC design unit.
# -scstacksize <value> Set SystemC thread stack size. The stack size is set as an integer
# number followed by the unit which can be Kb(Kilo-byte), Mb(Mega-byte) or
# Gb(Giga-byte). Examples: '1000 Kb', '1 Mb', '1 Gb'
# -noscmainscopename Strip sc_main() scope from the hierarchical path.
tcl脚本vsim命令的参数列表相关推荐
- 不出现php version网页_php冷知识 - 从命令行参数列表中获取选项
分享一个php的冷知识 - ,从命令行参数列表中获取选项 用到的函数是getopt 说明 函数签名是这样的 getopt ( string $options [, array $longopts [, ...
- logger 参数列表过长_[源码级解析] 巧妙解决并深度分析Linux下rm命令提示参数列表过长的问题...
在维护实习单位服务器的过程中,偶然发现一个有350万文件的文件夹需要清理,于是我习惯性执行了rm -rf ./*,却在数秒后被告知"参数列表过长".在一番折腾过后,我终于通过取巧的 ...
- python执行脚本时的命令行选项_Python 处理脚本的命令行参数(二)：使用click
安装click pip install click 使用步骤 使用@click.command() 装饰一个函数,使之成为命令行接口 使用@click.option() 等装饰函数,为其添加命令行选项 ...
- swift 脚本_Swift脚本和命令行参数
swift 脚本 In this tutorial, we'll discuss how to create Scripts in Swift. Yes, Swift is a scripting l ...
- Android配置模拟器参数,夜神模拟器支持命令行参数列表
Nox目前支持的命令行参数(支持3.0版本模拟器以及更高版本模拟器) Nox.exe -clone: ...
- NS3 Command Line Arguments 使用命令行参数改变脚本
转自:http://blog.sina.com.cn/s/blog_7ec2ab360102wxgr.html 除了通过NS_LOG环境变量外,另一个不用编译就可以改变NS3脚本的方法就是通过使用命令 ...
- python 命令行参数-python获取命令行参数的方法（汇总）
介绍python获取命令行参数的方法:getopt模和argparse模块. python版本:2.7 一.getopt模块 主要用到了模块中的函数: options, args = getopt.g ...
- python 命令行参数-Python3 命令行参数
Python3 命令行参数 Python 提供了 getopt 模块来获取命令行参数. $ python test.py arg1 arg2 arg3 Python 中也可以所用 sys 的 sys. ...
- python菜鸟教程h-Python 命令行参数
Python 命令行参数 Python 提供了 getopt 模块来获取命令行参数. $ python test.py arg1 arg2 arg3 Python 中也可以使用 sys 的 sys.a ...
最新文章
- 成都Uber优步司机奖励政策（1月9日）
- spark 写mysql 设置主键_Spark Sql 连接mysql
- ssh不断开的设置方法
- Dapper+SqlServerCe部署
- 从 WordCount 到文档的倒排索引详解
- 数据接口同步的同步方法
- 【资料下载区】【iCore、 iCore2相关资料】更新日期2017/1/11
- LeetCode 2192. 有向无环图中一个节点的所有祖先（拓扑排序）
- springboot jpa sql打印_SpringBoot集成Spring Data JPA以及读写分离
- python安装方法3.8.2_Python(开发环境工具)v3.8.2 x32 官方win版
- 程序设计中的数学思维函数总结（代码以C#为例）
- 降采样_嫦娥五号，欢迎回家！我国首次地外天体采样返回任务圆满完成
- STM32 上位机 测试蓝牙电话功能功能（包括拨打电话/挂断电话/接听电话/Audio Transfer/获取通话电话号码/获取本地电话号码/激活语音识别/获取本地号码/获取运营商名字/3GPP指令）
- GPS导航知识——DGPS
- android画廊无限轮播,ViewPager无限循环实现画廊式banner
- 计算机键盘的中心键,电脑键盘上各键的功能及作用
- C语言入门(一)——程序的基本概念
- 博弈DP：PIPI的炸弹
- 亚马逊服务器实现代理
- 招聘信息薪资范围是12-20K，能否要20K的薪资？