重启网卡报错Job for network.service failed because the control process exited with error code.
- 问题：配置静态ip后发现重启不了网卡
[root@localhost ~]# systemctl restart network
Job for network.service failed because the control process exited with error code.See "systemctl status network.service" and "journalctl -xe" for details.
- 首先再次确认了网卡配置是没有问题的，也并没有发现有手误敲错了单词
[root@localhost ~]# vim /etc/sysconfig/network-scripts/ifcfg-ens33
TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=static
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
NAME=ens33
UUID=f8506572-64e6-4f3d-b4c3-b7b47514f185
DEVICE=ens33
ONBOOT=yes
IPADDR=192.168.20.11
NETMASK=255.255.255.0
PREFIX=24
GATEWAY=192.168.20.2
DNS1=114.114.114.114根据提示输入systemctl status network.service命令后出现如下错误信息：
Loaded: loaded (/etc/rc.d/init.d/network; bad; vendor preset: disabled)Active: failed (Result: exit-code) since 三 2021-06-23 22:01:47 CST; 1min 16s agoDocs: man:systemd-sysv-generator(8)Process: 4681 ExecStart=/etc/rc.d/init.d/network start (code=exited, status=1/FAILURE)CGroup: /system.slice/network.service└─1192 /sbin/dhclient -H mini1 -1 -q -lf /var/lib/dhclient/dhclient--ens33.lease -pf /v...6月 23 22:01:47 mini1 network[4681]: RTNETLINK answers: File exists6月 23 22:01:47 mini1 network[4681]: RTNETLINK answers: File exists6月 23 22:01:47 mini1 network[4681]: RTNETLINK answers: File exists6月 23 22:01:47 mini1 network[4681]: RTNETLINK answers: File exists6月 23 22:01:47 mini1 network[4681]: RTNETLINK answers: File exists6月 23 22:01:47 mini1 network[4681]: RTNETLINK answers: File exists6月 23 22:01:47 mini1 systemd[1]: network.service: control process exited, code=exited status=16月 23 22:01:47 mini1 systemd[1]: Failed to start LSB: Bring up/down networking.6月 23 22:01:47 mini1 systemd[1]: Unit network.service entered failed state.6月 23 22:01:47 mini1 systemd[1]: network.service failed.
做法如下
和 NetworkManager 服务有冲突，直接关闭 NetworkManger 服务就好了， systemctl stop NetworkManager 。
[root@localhost ~]# systemctl stop NetworkManager
[root@localhost ~]# systemctl restart network发现成功
[root@localhost ~]# ping www.baidu.com //也能够上网了
PING www.a.shifen.com (36.152.44.96) 56(84) bytes of data.
64 bytes from 36.152.44.96 (36.152.44.96): icmp_seq=1 ttl=128 time=4.74 ms
64 bytes from 36.152.44.96 (36.152.44.96): icmp_seq=2 ttl=128 time=4.84 ms
64 bytes from 36.152.44.96 (36.152.44.96): icmp_seq=3 ttl=128 time=5.00 ms重启网卡报错Job for network.service failed because the control process exited with error code.相关推荐
- jenkins启动报错 Job for jenkins.service failed because the control process exited with error code.
启动时若提示下述内容,则表示启动失败 Job for jenkins.service failed because the control process exited with error code ...
- mysql重启报错b for mysqld.service failed because the control process exited with error code. See “syst
当我们重启mysql执行systemctl restart mysqld命令或者我们启动mysql服务时执行命令systemctl start mysqld时会出现以下报错:Job for mysql ...
- 启动nginx服务报错Job for nginx.service failed because the control process exited with error code.
nginx使用service nginx restart报错 启动nginx服务时如果遇到这个错误 Job for nginx.service failed because the control p ...
- Docker启动报错:Job for docker.service failed because the control process exited with error code. See “sy
本文转载自博客园作者:蜗牛coder,点击前往原文 本机环境是VMware Workstation上安装的CentOS7.然后下载Docker. DOCKER启动失败Job for docker.se ...
- Docker启动服务报错Job for docker.service failed because the control process exited with error code
执行启动命令: systemctl start docker systemctl enable docker 执行第一个命令报错: Job for docker.service failed beca ...
- Linux重启网卡报Job for network.service failed because the control process exited with error code. 错误
重启网卡报Job for network.service failed because the control process exited with error code. 错误 centos7下重 ...
- 关于Job for network.service failed because the control process exited with error code.
重启网络出现报错 Job for network.service failed because the control process exited with error code. See &quo ...
- Job for network.service failed because the control process exited with error code问题
最小化安装了centos7 当配置静态ip的时候,执行 重启网卡的命令 systemctl restart network 但是报了 Job for network.service failed be ...
- Job for network.service failed because the control process exited with error code. 的解决办法
问题描述: 在使用 Ubuntu-16.04.5 系统,由于设置了静态 IP 地址,在重启网卡服务器时,可能会出现 " Job for network.service failed beca ...
- cento网络故障：Job for network.service failed because the control process exited with error code. See sy
报错: [root@localhost ~]# systemctl restart network Job for network.service failed because the control ...
最新文章
- 机器学习入门（01）— 感知机概念、实现、局限性以及多层感知机
- 源码篇——AsyncTask机制
- resin设置jvm参数
- qtp：exit 函数
- win8 开发之旅(3) --五子棋游戏开发 前奏
- Linux IO复用：select、poll、epoll的理解与对比
- 玩转SecureCRT 安装
- 基于HTML5的WebGL实现的2D3D迷宫小游戏
- pyqt5-QFrame边框样式
- ORB-SLAM 解读(五) 地图点投影进行特征匹配
- 课时5 企业Web服务器现场抓鸡案例分享
- 两代人不同的求学之路
- 小失误点，不积跬步无以至千里
- 魔兽对战平台官网地图《小兵合成》 最强攻略+合成表+隐藏合成+隐藏英雄+
- shipyard docker集群问题
- 迅雷链：DPoA 与 VRF
- 如何关闭AndroidX?
- 转专业菜鸡的秋招总结
- [复试——大地测量学]第一章节——2022/12/30
- 如何利用PS将照片的灰色背景变为白色