linux 板子修改ip地址

1. 查看ip地址，

root@Widora:~# ifconfig
br-lan Link encap:Ethernet HWaddr 0C:EF:AF:D1:14:8F
inet addr:192.168.8.1 Bcast:192.168.8.255 Mask:255.255.255.0
inet6 addr: fddb:4a04:d1ab::1/60 Scope:Global
inet6 addr: fe80::eef:afff:fed1:148f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:159 errors:0 dropped:0 overruns:0 frame:0
TX packets:80 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:28901 (28.2 KiB) TX bytes:12186 (11.9 KiB)

eth0 Link encap:Ethernet HWaddr 0C:EF:AF:D1:14:8E
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:304 errors:0 dropped:0 overruns:0 frame:0
TX packets:104 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:71537 (69.8 KiB) TX bytes:18036 (17.6 KiB)
Interrupt:5

eth0.1 Link encap:Ethernet HWaddr 0C:EF:AF:D1:14:8E
inet6 addr: fe80::eef:afff:fed1:148e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:26 errors:0 dropped:0 overruns:0 frame:0
TX packets:29 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1672 (1.6 KiB) TX bytes:6332 (6.1 KiB)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:336 errors:0 dropped:0 overruns:0 frame:0
TX packets:336 errors:0 dropped:0 overruns:0 carrier:0

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:132 errors:0 dropped:0 overruns:0 frame:0
TX packets:132 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:13131 (13.1 KB) TX bytes:13131 (13.1 KB)

2. 打开 network ，命令 vi /etc/config/network

config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'

config globals 'globals'
option ula_prefix 'fddb:4a04:d1ab::/48'

config interface 'lan'
option ifname 'eth0'
option force_link '1'
option macaddr '0c:ef:af:d1:14:8f'
option type 'bridge'
option proto 'static'
option ipaddr '192.168.8.1' //改为192.168.1.200
option netmask '255.255.255.0'
option ip6assign '60'

config switch
option name 'switch0'
option reset '1'

option enable_vlan '0'

3. 运行命令 /etc/init.d/network reload 使修改的ip地址生效

root@Widora:/# /etc/init.d/network reload
[ 1596.570000] rt305x-esw 10110000.esw: link changed 0x00
[ 1596.610000] br-lan: port 2(ra0) entered disabled state
[ 1596.620000] br-lan: port 1(eth0) entered disabled state
[ 1596.640000] device eth0 left promiscuous mode
[ 1596.650000] br-lan: port 1(eth0) entered disabled state
[ 1596.670000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1596.690000] device ra0 left promiscuous mode
[ 1596.690000] br-lan: port 2(ra0) entered disabled state
[ 1596.700000] device eth0 entered promiscuous mode
[ 1596.720000] device ra0 entered promiscuous mode
[ 1596.730000] br-lan: port 2(ra0) entered forwarding state
[ 1596.730000] br-lan: port 2(ra0) entered forwarding state
[ 1596.740000] br-lan: port 1(eth0) entered forwarding state
[ 1596.740000] br-lan: port 1(eth0) entered forwarding state
root@Widora:/# [ 1598.730000] br-lan: port 2(ra0) entered forwarding state
[ 1598.740000] br-lan: port 1(eth0) entered forwarding state
[ 1601.120000] rt305x-esw 10110000.esw: link changed 0x01

4. 重新运行ifconfig，查看ip地址

root@Widora:/# ifconfig
br-lan Link encap:Ethernet HWaddr 0C:EF:AF:D1:14:8F
inet addr:192.168.1.200 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fddb:4a04:d1ab::1/60 Scope:Global
inet6 addr: fe80::eef:afff:fed1:148f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:176 errors:0 dropped:0 overruns:0 frame:0
TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:12254 (11.9 KiB) TX bytes:9058 (8.8 KiB)

eth0 Link encap:Ethernet HWaddr 0C:EF:AF:D1:14:8E
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:924 errors:0 dropped:0 overruns:0 frame:0
TX packets:205 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:171418 (167.4 KiB) TX bytes:34038 (33.2 KiB)
Interrupt:5

eth0.1 Link encap:Ethernet HWaddr 0C:EF:AF:D1:14:8E
inet6 addr: fe80::eef:afff:fed1:148e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:26 errors:0 dropped:0 overruns:0 frame:0
TX packets:45 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1672 (1.6 KiB) TX bytes:10312 (10.0 KiB)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:2555 errors:0 dropped:0 overruns:0 frame:0
TX packets:2555 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:175055 (170.9 KiB) TX bytes:175055 (170.9 KiB)

ra0 Link encap:Ethernet HWaddr 0C:EF:AF:D1:14:8E
inet6 addr: fe80::eef:afff:fed1:148e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:6

linux 板子修改ip地址相关推荐

linux系统修改ip地址教程。
在Linux系统中,修改IP地址的方法会略有不同,下面为大家介绍两种常用的方法. 方法一:通过命令行修改IP地址步骤一:打开终端,并使用root用户登录系统. 步骤二:输入命令 ifconfig , ...
Linux中修改ip地址,并且设置静态的ip
Linux学习视频来自韩顺平老师修改ip地址,并且设置为静态的ip Linux系统中输入 cd /etc/sysconfig/network-scripts,之后输入ls可以看到一个文件,每个环境下 ...
Linux如何修改ip地址
参考: 3 Ways to change ip address in Linux - howtouselinux Ubuntu篇: 一.Desktop版方法如果你使用了Desktop版本或者ser ...
linux系统修改ip地址方法
一.查看当前ip地址 [root@localhost ~]# ifconfig eth2 Link encap:Ethernet HWaddr 00:10:18:AB:08:C4 ...
linux下修改ip用哪个文件,linux下修改IP地址
查看IP ifconfig [root@localhost ~]# ifconfig eth0: flags=4163 mtu 1500 ether 52:54:00:8a:fe:e6 txqueue ...
linux 修改ip权限,Linux下修改IP地址
Linux系统下如何设置IP地址?我们可以通过命令设定IP的方法,不过此方法的前提条件是用户需root权限.在系统的 /etc/sysconfig/network-script/ifcfg-eth0文 ...
LINUX怎么修改IP地址
1,先搜索了一下,得到以下解释 IP IP地址 Netmark 子网掩码 Gateway 默认网关 HostName 主机名称 DomainName 域名 DNS DNS的IP 2,需要修改的文件常有 ...
Linux下修改ip地址,网关
1. 查看ip地址命令: ifconfig 2. 修改ip的配置文件编辑/etc/sysconfig/network-scripts/目录下的ifcfg-ens32文件方便粘贴: IPADDR= ...
Linux下修改ip地址
vi /etc/sysconfig/network-scripts/ifcfg-eth0 回车后,开始编辑,填写ip地址.子网掩码.网关.DNS等.其中"红框内的信息"是必须得有的 ...

linux 板子修改ip地址

linux 板子修改ip地址相关推荐

最新文章

热门文章