tracker使用

I estimate that the average person loses their keys over seventeen times every hour. Trackr is a Bluetooth tracker that you can use to find your keys in the couch cushion, or locate your wallet if you left it behind at the bar. Here’s how to set yours up.

我估计普通人每小时会丢失密码超过17次。 Tracker是一种蓝牙跟踪器 ,可用于在沙发垫上查找钥匙,或者将钱包放在吧台中以找到钱包。 这是设置您的方法。

什么是追踪器? (What Is Trackr?)

Trackr is a Bluetooth-enabled device tracker that fits on your keychain or can slip in your wallet that pairs with your smartphone. Trackr comes in a few different form factors. The Trackr Bravo ($30) is roughly the size of a quarter with a loop to fit on your keychain and a single button on the front you can press to ring your phone. The Trackr Pixel ($25) is slightly smaller, comes in nine colors, and attaches to your keys, purse, or backpack with a string. The Trackr Wallet ($30) is about the size of a credit card, but slightly thicker, designed to fit in your wallet. The Trackr Wallet 2.0 ($30) is exactly the size and shape of a credit card, but is only available for pre-order at the time of writing. If you buy Trackr devices in bulk, you can get them for a decent discount. Amazon sells four Trackr Bravo devices for $80, or $20 each.

Tracker是一个支持蓝牙的设备跟踪器,可安装在您的钥匙串上,或者可以滑入与智能手机配对的钱包中。 跟踪器有几种不同的外形尺寸。 Trackr Bravo ($ 30)大约只有四分之一大小,带有一个可装在钥匙扣上的环,您可以按一下前面的单个按钮以敲响手机。 Trackr Pixel ($ 25)稍小一点,有九种颜色,可以用绳子固定在钥匙,钱包或背包上。 Tracker钱包 ($ 30)大约相当于一张信用卡的大小,但略厚一些,可以放进钱包。 Trackr Wallet 2.0 ($ 30)的大小和信用卡形状完全一样,但仅在撰写本文时才能预购。 如果您批量购买Tracker设备,则可以享受相当优惠的价格。 亚马逊以$ 80的价格出售四台Trackr Bravo设备 ,或每台$ 20。

Once your Trackr is connected to your phone, you can open the Trackr app to ring it if you’re nearby. You can also see where your keys, wallet, or other missing device was last seen on a map. If you tap the speaker icon in the app, your Trackr will make a loud ringtone, helping you to find it, even if it’s stuck under the couch or left in your other pants. If you know where your keys are, but you’ve lost your phone, you can also click the button on your Trackr. This will ring your phone, showing you that it was in your hand the whole time, and making you question all your life choices up to this point.

将Tracker连接到手机后,如果您在附近,则可以打开Tracker应用以将其响铃。 您还可以查看您的钥匙,钱包或其他丢失的设备在地图上的最后显示位置。 如果您在应用程序中点击扬声器图标,则Tracker会发出响亮的铃声,即使它被卡在沙发下或留在其他裤子中也可以帮助您找到它。 如果您知道按键在哪里,但手机丢失了,也可以单击“跟踪器”上的按钮。 这将使您的电话响起,向您显示它一直在您的手中,并让您质疑到目前为止的所有生活选择。

If you’ve lost your keys and you’re not in Bluetooth range, the app on your phone will show you the last known GPS location of your device. Trackr also uses a service called Crowd Locate Network to find your stuff even if you’re not near it. Everyone who has the Trackr app installed can locate your devices if they get near it, at which point your map location will be updates. So, for example, if you left your wallet at the bar, but someone picks it up and takes it somewhere, your wallet’s location will be updated any time it gets near another Trackr user. This isn’t a guarantee, but it’s a handy fall back if you lose track of your stuff, particularly if you live in a big city where there’s a higher chance someone else might use the same app you do.

如果您丢失了钥匙并且不在蓝牙范围内,则手机上的应用程序会向您显示设备的最新已知GPS位置。 即使您不在附近,Trackr也会使用一项名为“ 人群定位网络”的服务来查找您的东西。 安装了Tracker应用程序的每个人都可以在靠近设备的情况下找到您的设备,届时您的地图位置将得到更新。 因此,例如,如果您将钱包留在酒吧,但有人将其拿起并拿到某处,则只要它靠近另一个Trackr用户,您的钱包位置就会被更新。 这不是保证,但是如果您不了解自己的东西,这是一个方便的方法,特别是如果您生活在一个大城市,那里其他人很有可能会使用与您相同的应用程序。

Apart from finding your keys, Trackr also offers a handy skill for the Amazon Echo that lets you find your phone with a voice command. You don’t need a Trackr device in order to use this, and the skill is free. You can read our guide here on how to set that up.

除了查找按键之外,Trackr还为Amazon Echo提供了方便的技能,可让您通过语音命令查找手机。 您不需要跟踪器设备即可使用它,并且该技能是免费的。 您可以在此处阅读有关如何进行设置的指南 。

如何设置追踪器 (How to Set Up a Trackr)

To set up your Trackr, you’ll need to install the Trackr app for Android or iOS. When you first open the app, tap “Add a New Device.”

要设置Tracker,您需要安装适用于Android或iOS的Tracker应用。 首次打开该应用程序时,点击“添加新设备”。

Tap your device in the list of Trackr devices on the next screen.

在下一屏幕上的“跟踪器”设备列表中点击您的设备。

Give your Trackr a name that describes the object your tracking, like “keys” or “wallet.”

给您的跟踪器起一个描述您要跟踪的对象的名称,例如“键”或“钱包”。

Next, the app will tell you to press the button on the front of your Trackr. Click it to start the pairing process.

接下来,该应用程序将告诉您按Tracker前面的按钮。 单击它开始配对过程。

Place the Trackr next to your phone. The light should be blinking blue. Tap Next on your phone to pair your Trackr.

将Tracker放在手机旁边。 指示灯应闪烁蓝色。 点按手机上的“下一步”以将“跟踪器”配对。

The Trackr app will take a moment to connect with your device. When it’s done, tap Next.

Tracker应用程序将需要一些时间才能与您的设备连接。 完成后,点击下一步。

After your device is connected, Trackr will conduct a couple tests to make sure your device is working. First, it will test the range. To do this, hold your Trackr a few feet away from your phone and tap Test Range. After a moment, the app will tell you how far away you can get before the Trackr will disconnect. This will be affected by walls and electronics, so you may not be able to walk across the house and stay connected, but it should work when you’re relatively close by.

连接设备后,Tracker将进行一些测试,以确保您的设备可以正常工作。 首先,它将测试范围。 为此,请将跟踪器离手机几英尺远,然后点击测试范围。 片刻之后,该应用程序会告诉您跟踪器断开连接之前您能走多远。 这将受到墙壁和电子设备的影响,因此您可能无法穿过房屋并保持连接状态,但是在您离得较近的时候应该可以使用。

Next, the app will test how loud your Trackr is. Put the Trackr a few feet away from your phone and tap Ring Device. Your Trackr will emit a ringing sound. This is how loud your device will ring when you’re trying to locate it from your phone. If it works properly, the app will give you a readout of its decibel level.

接下来,该应用将测试您的Tracker的声音大小。 将追踪器放在距离手机几英尺的地方,然后点按“铃声设备”。 跟踪器将发出铃声。 当您尝试从手机中找到设备时,这就是设备响起的声音。 如果运行正常,该应用程序将为您提供分贝级别的读数。

After both tests, you’ll see a “Compatibility Report.” Of course, you’d assume that the Trackr device would work well and be compatible and all that, but it’s handy to have a couple tests to show you how it works and make sure that yours is working properly. Tap Done to continue.

两项测试完成后,您将看到“兼容性报告”。 当然,您会假定Trackr设备可以很好地工作并且兼容,但是要进行一些测试以向您展示它的工作方式并确保您的设备正常工作很方便。 点按完成以继续。

Finally, Trackr will ask you to sign into (or create) your Trackr account. This will tie your Trackr to your account, so you’re able to locate it from other devices. Additionally, this will connect you to the Trackr Crowd Locate service, which lets other users find your devices if you’re not in range. And, likewise, allows your phone to spot any Trackrs that someone else lost.

最后,Tracker会要求您登录(或创建)您的Tracker帐户。 这会将您的Tracker绑定到您的帐户,因此您可以从其他设备找到它。 此外,这将使您连接到Tracker Crowd Locate服务,该服务可让其他用户在您不在范围内时找到您的设备。 并且,同样,它允许您的手机发现其他人丢失的所有跟踪器。

You can repeat this process for as many Trackr devices as you need. Once your Trackr is connected, you’ll see a dotted green semi-circle at the bottom, indicating how close you are to your device (if you’re not within Bluetooth range, it will say “Searching…”), and a round speaker icon. Tap the speaker icon to ring your keys. At the top of the screen, you’ll see a map showing you the last known location of your Trackr.

您可以根据需要在任意多个Tracker设备上重复此过程。 跟踪器连接好后,您会在底部看到一个绿色的半圆点,表明您与设备的距离(如果您不在蓝牙范围内,则会显示“正在搜索...”),以及一个圆形扬声器图标。 点击扬声器图标以敲击按键。 在屏幕顶部,您会看到一张地图,其中显示了Tracker的最后一个已知位置。

You can also tap the menu button at the top right corner to see a list of any other devices that you have connected to Trackr.

您也可以点击右上角的菜单按钮以查看已连接到Tracker的任何其他设备的列表。

Unfortunately, Trackr devices can only find your stuff as long as they’re within Bluetooth range of your phone (or another Trackr user), but that’s still more than enough to take care of those moments when you absent-mindedly forget where you left your wallet.

不幸的是,Tracker设备只能在您的手机(或其他Tracker用户)的蓝牙范围内找到您的东西,但这仍然足以照顾那些您心不在forget忘却离开的那一刻。钱包。

翻译自: https://www.howtogeek.com/310289/how-to-use-trackr-to-find-your-keys-wallet-phone-or-anything-else/

tracker使用

tracker使用_如何使用Tracker查找钥匙,钱包,电话或其他任何东西相关推荐

  1. 设计图纸管理系统_解决图文档查找困难

    设计图纸管理系统_解决图文档查找困难.中小企业图文档版本的管控,对一个制造企业来说图文档版本管理是十分重要的.因企业设计图纸多,图文档编码不统一,随意修改,各种各样的版本号出现,书写也不规范,这样就很 ...

  2. tracker服务器_.NET Core 开发 BT Tracker 服务器

    (给DotNet加星标,提升.Net技能) 转自:myzony cnblogs.com/myzony/p/10493707.html 一.什么是 BT Tracker  BT下载过程当中,我们如果拿到 ...

  3. python list查找元素_使用python list 查找所有匹配元素的位置实例

    使用python list 查找所有匹配元素的位置实例 如下所示: import re word = "test" s = "test abcdas test 1234 ...

  4. java 二分搜索获得大于目标数的第一位_程序员常用查找算法(顺序、二分、插值、分块、斐波那契)...

    顺序查找 基本思想 属于线性查找和无序查找,从一端开始顺序扫描,直到找到与目标值value相等的元素. 这是最基本的查找方法,也是时间复杂度最高的查找算法. 在数据过多时,这种方法并不适用. 代码实现 ...

  5. 查找重复文件_重复文件快速查找删除

    对于Mac用户来说,Cisdem Duplicate Finder是一款出色的重复查找工具,可以检测和查找所有重复内容,并批量删除它们以快速释放外部/内部硬盘空间.所有重复的照片,音乐,文档,视频或其 ...

  6. python中复制n次字符串_在Python中查找字符串中多次出现的字符串

    精慕HU 使用正则表达式,您可以使用re.finditer查找所有(非重叠)出现的事件:>>> import re>>> text = 'Allowed Hello ...

  7. python图片找字_如何用python查找图像中的字母

    字母似乎总是在数字的末尾.如果这是真的,您可以采用更简单的方法:找到所有轮廓 创建边界框列表(即每个轮廓对应一个框) 确定哪一个是最右边的边界框 使用所有其他框的(x,y,width,height)信 ...

  8. python信息找人的算法_算法篇-python查找算法

    上一篇的递归算法中,了解到算法的复杂度.递归就是在函数中调用本身. 在汉诺塔游戏例子中,如果你需要移动的盘子很多时,程序运行就会消耗很长时间来计算结果.可以回顾下 ->算法篇-python递归算 ...

  9. selenium查找文本_在Selenium中查找具有链接文本和部分链接文本的元素

    selenium查找文本 Selenium中CSS定位器是一个基本概念,每个旨在使用Selenium执行自动化测试的测试人员都应该意识到这一点. 在Selenium中充分使用CSS定位器可以帮助您以更 ...

最新文章

  1. linux使用线程实现生产者消费者问题,Linux平台下线程同步,实现“生产者消费者问题”...
  2. Linux wine
  3. 为 Vim 编辑器开发定制插件
  4. sql 除法_七天学会SQL-04SQL复杂查询
  5. 【转】C#中Invoke的用法
  6. 安卓怎么调用系统的ui_安卓逆向 | 为了反射调用我们怎么能拿到被HOOK函数的实例...
  7. tlc5620输出三角波流程图_[笔记].串型DAC TLC5620生成锯齿波、三角波实验,Verilog版本...
  8. python中sn的意思_python学习笔记
  9. codeforces#237_div2_B Marathon
  10. 优化理论08-----约束优化的最优性条件、拉格朗日条件、凸性、约束规范、二阶最优性条件(上)
  11. stm32F407 调试 LAN8720A ping不通问题解决
  12. Python绘图Turtle库详解
  13. 1582年10月份日历表_1582年10月发生了什么 日历为什么凭空少了十天
  14. 用众城计算机弹学猫叫,19年真男神当众被逼学猫叫?谁能把我的童年还给我!...
  15. 多平台的敏感信息监测工具-GShark
  16. ftt传感器_FTTTB温度传感器温度特性实验仪介绍及实验数据(新).doc
  17. 分享一个简易的AT变速箱(TCU)换挡逻辑控制模型
  18. android--新闻阅读器实现源码
  19. 满足多元化场景需求,戴尔显示器新品绚丽亮相
  20. Python中调用FRED报错ValueError: time data 'fred' does not match format '%Y-%m-%d'

热门文章

  1. Android相机预览,指定区域显示预览框,在区域内出现人脸进行人脸识别,并抓拍人脸照片存在本地,CameraX,虹软人脸识别
  2. sql转置两种实现方式记录
  3. 图像处理 图像相似算法aHash、dHash、pHash解析与对比
  4. ce修改面板属性_用CE脚本进行FGO一键修改局内属性
  5. 互联网络业的十大发展趋势
  6. 基于SSM纺织品公司订单管理系统
  7. Arm Compiler for Embedded 6 编译器工具链常用选项
  8. 企业与个人短视频变现技巧
  9. java基础--名词解释汇总
  10. JSP作业提交管理系统(JSP作业管理系统)JSP学生作业管理JSP教师作业批改业提交管理系统