华为模拟器ipv6接口配置

本实验所需命令：

1.ipv6

2.ipv6 enable

3.ipv6 address ??????

4.display ipv6 interface g ?/?/?(用来查看ipv6配置是否正确

全球单播地址为3001::1/64和3001::2/64

实验需求：

让路由器有ipv6转发功能

给路由器互连的两个接口配置全球单播地址

所需设备两台路由器即可

以下是拓扑图：

详细步骤如下：

AR1：

sys

Enter system view, return user view with Ctrl+Z.

[Huawei]ipv6

[Huawei]interface GigabitEthernet 0/0/0

[Huawei-GigabitEthernet0/0/0]ipv6 enable

[Huawei-GigabitEthernet0/0/0]ipv6 address 3001::1/64

[Huawei-GigabitEthernet0/0/0]

Oct 25 2013 10:39:06-05:13 Huawei IPV6/2/IF_IPV6CHANGE:OID 16777216.50331648.100663296.16777216.33554432.16777216.922746880.33554432.0.16777216 The status of the IPv6 Interface changed. (IfIndex=50331648, IfDescr=HUAWEI, AR Series, GigabitEthernet0/0/0 Interface, IfOperStatus=16777216, IfAdminStatus=16777216)

[Huawei-GigabitEthernet0/0/0]

Oct 25 2013 10:39:06-05:13 Huawei %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IPv6 on the interface GigabitEthernet0/0/0 has entered the UP state.

[Huawei-GigabitEthernet0/0/0]

AR2：

sys

Enter system view, return user view with Ctrl+Z.

[Huawei]ipv6

[Huawei]interface GigabitEthernet 0/0/0

[Huawei-GigabitEthernet0/0/0]ipv6 enable

[Huawei-GigabitEthernet0/0/0]ipv6 address 3001::2/64

[Huawei-GigabitEthernet0/0/0]

Oct 25 2013 10:41:02-05:13 Huawei IPV6/2/IF_IPV6CHANGE:OID 16777216.50331648.100663296.16777216.33554432.16777216.922746880.33554432.0.16777216 The status of the IPv6 Interface changed. (IfIndex=50331648, IfDescr=HUAWEI, AR Series, GigabitEthernet0/0/0 Interface, IfOperStatus=16777216, IfAdminStatus=16777216)

[Huawei-GigabitEthernet0/0/0]

Oct 25 2013 10:41:02-05:13 Huawei %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IPv6 on the interface GigabitEthernet0/0/0 has entered the UP state.

[Huawei-GigabitEthernet0/0/0]

验证一下：

就此完成