Oracle Cluster verification utility failed 的解决方法
Linux AS4.0 , Oracle10.2.0.1 RAC 两个节点
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 90 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
rac1
rac2
CSS is active on all nodes.
Waiting for the Oracle CRSD and EVMD to start
Oracle CRS stack installed and running under init(1M)
Running vipca(silent) for configuring nodeapps
给定的接口"eth0" 不是公共接口,应使用公共接口来配置虚拟IP.
[root@rac2 ~]#
然后在节点1执行 vipca 之后然按照如下步骤配置,直到点击ok ,
错误现象见图片。
[url]http://yangtingkun.itpub.net/post/468/276589[/url]
Oracle CRS stack installed and running under init(1M)
Running vipca(silent) for configuring nodeapps
The given interface(s), "ce0" is not public. Public interfaces should be used to configure virtual IPs.
root@ahrac1 # ./vipca
2007-12-12 14:29 tolywang
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly re
commended that you retry the configuration assistants at this time. Not successf
ully running any "Recommended" assistants means your system will not be correctl
y configured.
1. Check the Details panel on the Configuration Assistant Screen to see the erro
rs resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.2007-12-12 14:35 yinheng8066
我在windows2003sp1上也碰到过这个问题,当时是先运行VIPCA,配置IP,之后忽略此错误,cluster安装完毕
关注此帖
GND-RAC01</u01/product/oraInventory/logs>$cat installActions2007-12-12_11-53-29AM.log
INFO: Starting to execute configuration assistants
INFO: Command = /u01/product/crs/bin/cluvfy stage -post crsinst -n GND-RAC01,GND-RAC02
Checking Cluster manager integrity...
Checking CSS daemon...
Daemon status check passed for "CSS daemon".
Cluster integrity check passed
Checking OCR integrity...
OCR of correct Version "2" exists.
Data integrity check for OCR passed.
Liveness check passed for "CRS daemon".
Liveness check passed for "CSS daemon".
Liveness check passed for "EVM daemon".
Checking existence of VIP node application (required)
Check failed.
Check failed on nodes:
GND-RAC02,GND-RAC01
Check ignored.
Check ignored.
Post-check for cluster services setup was unsuccessful on all the nodes.
-----------------------------------------------------------------------------
*** Starting OUICA ***
Oracle Home set to /u01/product/crs
Configuration directory is set to /u01/product/crs/cfgtoollogs. All xml files under the directory will be processed
INFO: The "/u01/product/crs/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
-----------------------------------------------------------------------------
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
[quote]原帖由 [i]yinheng8066[/i] 于 2007-12-12 14:35 发表 [url=http://www.itpub.net/redirect.php?goto=findpost&pid=9174677&ptid=909387][img]http://www.itpub.net/p_w_picpaths/common/back.gif[/img][/url]
我在windows2003sp1上也碰到过这个问题,当时是先运行VIPCA,配置IP,之后忽略此错误,cluster安装完毕
关注此帖 [/quote]
不过我在rac02 运行sh root.sh 的时候出现错误提示,然后就在节点1上运行过一次 vipca , 这个时候还需要运行一次 ?
vipca 是仅仅在安装CRS的主节点(rac01) 上运行吧 ,那就应该生效了,crs都可以启动了,奇怪 !!
vipca 在节点1上运行, 应该是在第二个节点运行 sh root.sh 报错之后,出现OUI-25031及Oracle Cluster Verification Utility配置出错之前吧 ?
[quote]原帖由 [i]tolywang[/i] 于 2007-12-12 14:48 发表 [url=http://www.itpub.net/redirect.php?goto=findpost&pid=9174786&ptid=909387][img]http://www.itpub.net/p_w_picpaths/common/back.gif[/img][/url]
你运行rac2 上的 root.sh
如果是的话,以root 用户身份在第二个节点上手动调用 VIPCA。2007-12-12 15:01 yinheng8066
以 root 用户身份按顺序执行以下脚本(一次执行一个)。在当前脚本完成后,再继续执行下一个脚本。
在 rac1 上执行 /u01/app/oracle/oraInventory/orainstRoot.sh。
在 rac2 上执行 /u01/app/oracle/oraInventory/orainstRoot.sh。
在 rac1 上执行 /u01/app/oracle/product/10.2.0/crs_1/root.sh。
在 rac2 上执行 /u01/app/oracle/product/10.2.0/crs_1/root.sh。
[quote]原帖由 [i]yinheng8066[/i] 于 2007-12-12 15:01 发表 [url=http://www.itpub.net/redirect.php?goto=findpost&pid=9174897&ptid=909387][img]http://www.itpub.net/p_w_picpaths/common/back.gif[/img][/url]
以 root 用户身份按顺序执行以下脚本(一次执行一个)。在当前脚本完成后,再继续执行下一个脚本。
在 rac1 上执行 /u01/app/oracle/oraInventory/orainstRoot.sh。
在 rac2 上执行 /u01/app/oracle/oraInventory/orainstRoot.sh。
在 rac1 上执行 /u01/app/oracle/product/10.2.0/crs_1/root.sh。
在 rac2 上执行 /u01/app/oracle/product/10.2.0/crs_1/root.sh。
还好,我是按照这个顺序。
我每台Sever上有两片Public NIC , 一片 Private NIC .
我需要指明的 VIP 对应eth2 public 网卡的网段 。 不是 eth0 . 不知道是不是这个原因,难道要我将eth0 先屏蔽 ?
[quote]原帖由 [i]yinheng8066[/i] 于 2007-12-12 14:56 发表 [url=http://www.itpub.net/redirect.php?goto=findpost&pid=9174852&ptid=909387][img]http://www.itpub.net/p_w_picpaths/common/back.gif[/img][/url]
如果是的话,以root 用户身份在第二个节点上手动调用 VIPCA。 [/quote]
RAC02 上执行 sh root.sh 报错:
[root@GND-RAC02 crs]# sh root.sh
WARNING: directory '/u01/product' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/product' is not owned by root
WARNING: directory '/u01' is not owned by root
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: gnd-rac01 gnd-pri01 gnd-rac01
node 2: gnd-rac02 gnd-pri02 gnd-rac02
clscfg: Arguments check out successfully.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 90 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
gnd-rac01
gnd-rac02
CSS is active on all nodes.
Oracle CRS stack installed and running under init(1M)
Running vipca(silent) for configuring nodeapps
Invalid node name "GND-RAC01" entered in an input argument.
Invalid node name "GND-RAC01" entered in an input argument.2007-12-12 15:18 tolywang
Oracle CRS stack installed and running under init(1M)
Running vipca(silent) for configuring nodeapps
Invalid node name "GND-RAC01" entered in an input argument.
Invalid node name "GND-RAC01" entered in an input argument.
出现两次
Oracle CRS stack installed and running under init(1M)
Running vipca(silent) for configuring nodeapps
Invalid node name "GND-RAC01" entered in an input argument.
Invalid node name "GND-RAC01" entered in an input argument.
Invalid node name "GND-RAC01" entered in an input argument.
Invalid node name "GND-RAC01" entered in an input argument.
会不会是public网卡设置有关系 ?
# Do not remove the following line, or various programs
# that require network functionality will fail.
# 127.0.0.1 GND-RAC01
172.20.1.19 GND-RAC01
10.1.0.1 GND-PRI01
172.20.1.29 GND-VIP01
172.20.1.18 GND-RAC02
10.1.0.2 GND-PRI02
172.20.1.28 GND-VIP02
我有两个public card :
172.20.1.19 GND-RAC01
[quote]原帖由 [i]tolywang[/i] 于 2007-12-12 15:13 发表 [url=http://www.itpub.net/redirect.php?goto=findpost&pid=9174996&ptid=909387][img]http://www.itpub.net/p_w_picpaths/common/back.gif[/img][/url]
我每台Sever上有两片Public NIC , 一片 Private NIC .
我需要指明的 VIP 对应eth2 public 网卡的网段 。 不是 eth0 . 不知道是不是这个原因,难道要我将eth0 先屏蔽 ?
当时我的环境是一片public eth0, 一片private eth1。
应该不需要屏蔽吧,貌似不是这个原因2007-12-12 15:34 yinheng8066
你出现这样的报错
Oracle CRS stack installed and running under init(1M)
Running vipca(silent) for configuring nodeapps
Invalid node name "GND-RAC01" entered in an input argument.
Invalid node name "GND-RAC01" entered in an input argument.
正常情况应该是下面的
Oracle CRS stack installed and running under init(1M)
Running vipca(silent) for configuring nodeapps
The given interface(s), "eth0" is not public. Public interfaces should be used to configure virtual IPs.2007-12-12 15:52 tolywang
PRKV-1060 "Invalid node name \"{0}\" entered in an input argument."
Cause: An attempt has been made to configure CRS node applications for the node that is not part of the cluster.
Action: Check if the node is configured in the cluster using '<CRS home>/bin/olsnodes' Enter only the nodes that are part of the cluster, or add the node to the cluster before configuring nodeapps.
gnd-rac01
gnd-rac02
GND-RAC01</u01/product/crs/bin>$olsnodes
gnd-rac01
gnd-rac02
报以上错误之后在节点2上第二次执行(测试一下而已) : sh root.sh
[root@GND-RAC02 crs]# sh root.sh
WARNING: directory '/u01/product' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
Oracle CRS stack is already configured and will be running under init(1M)2007-12-12 16:07 tolywang
[url]http://www.dbasupport.com/forums/archive/index.php/t-52297.html[/url]
Hi All,
Ryan2007-12-12 17:03 tolywang
[quote]原帖由 [i]yinheng8066[/i] 于 2007-12-12 15:34 发表 [url=http://www.itpub.net/redirect.php?goto=findpost&pid=9175194&ptid=909387][img]http://www.itpub.net/p_w_picpaths/common/back.gif[/img][/url]
你出现这样的报错
Oracle CRS stack installed and running under init(1M)
Running vipca(silent) for configuring nodeapps
Invalid node name "GND-RAC01" entered in an input argument.
Invalid node name "GND-RAC01" entered in an input argument.
正常情况应该是下面的
Oracle CRS stack installed and running under init(1M)
Running vipca(silent) for configuring nodeapps
The given interface(s), "eth0" is not public. Public interfaces should be used to configure virtual IPs. [/quote]
的确是设置了多个public nic导致的:
[root@gnd-rac02 crs]#
[root@gnd-rac02 crs]# sh root.sh
WARNING: directory '/u01/product' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/product' is not owned by root
WARNING: directory '/u01' is not owned by root
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>node 1: gnd-rac01 gnd-pri01 gnd-rac01
node 2: gnd-rac02 gnd-pri02 gnd-rac02
clscfg: Arguments check out successfully.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 90 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
gnd-rac01
gnd-rac02
CSS is active on all nodes.
Oracle CRS stack installed and running under init(1M)
Running vipca(silent) for configuring nodeapps
The given interface(s), "eth2" is not public. Public interfaces should be used to configure virtual IPs.
运行vipca 之后安装一切正常,目前已经成功安装oracle software.
转载于:https://blog.51cto.com/gaoshan/290500
Oracle Cluster verification utility failed 的解决方法相关推荐
- 11gR2 grid安装最后报错[INS-20802] Oracle Cluster Verification Utility failed
原因说是在hosts文件里指定了scan ip 日志中也报错: INFO: Checking Single Client Access Name (SCAN)... INFO: Checking na ...
- oracle exp cluster n,oracle cluster verfication utility failed
节点间的时间同步对于Oracle来说是非常重要的,在11g版本之前往往通过搭建NTP服务器完成时间同步.在Oracle 11g中新增加了一个CTSS(Cluster Time Synchronizat ...
- oracle安装后开机很慢,Windows下安装Oracle拖慢开机速度的解决方法
环境:win7 + oracle R2 方法:将安装Oracle后自动开机启动的服务改为手动启动 步骤如下: 1.修改服务项 Ctrl + R,输入services.msc,打开服务列表,找到Orac ...
- oracle不能关闭,Oracle shutdown immediate无法关闭数据库解决方法
在测试服务器上使用shutdown immediate命令关闭数据库时,长时间无法关闭数据库,如下所示 1: [oracle@DB-Server admin]$ sqlplus / as sysdba ...
- confluence中org.apache.tomcat.util.net.NioEndpoint$Acceptor.run Socket accept failed的解决方法
confluence中org.apache.tomcat.util.net.NioEndpoint$Acceptor.run Socket accept failed的解决方法 参考文章: (1)co ...
- oracle sql语句中包含‘’ 的解决方法
oracle sql语句中包含'&' 的解决方法 参考文章: (1)oracle sql语句中包含'&' 的解决方法 (2)https://www.cnblogs.com/hm1990 ...
- Win7无法安装程序提示Installer integrity check has failed的解决方法
Win7无法安装程序提示Installer integrity check has failed的解决方法 参考文章: (1)Win7无法安装程序提示Installer integrity check ...
- ora-01033:oracle initialization or shutdown in progress 解决方法
ora-01033:oracle initialization or shutdown in progress 解决方法 参考文章: (1)ora-01033:oracle initializatio ...
- Ubuntu16.04连接SSH出现 Server responded “Algorithm negotiation failed” 的解决方法
Ubuntu16.04连接SSH出现 Server responded "Algorithm negotiation failed" 的解决方法 参考文章: (1)Ubuntu16 ...
- oracle执行先决条件检查失败的解决方法
oracle执行先决条件检查失败的解决方法 参考文章: (1)oracle执行先决条件检查失败的解决方法 (2)https://www.cnblogs.com/xiaoxiaoweng/p/72779 ...
最新文章
- Spring 的优秀工具类盘点
- 用 vue2 和 webpack 快速建构 NW.js 项目(1)
- Phoenix 关联映射 Hbase表 获取不到数据,upsert hbase 列名为16进制字符
- 图形的装饰教案计算机,《电脑图案设计师》教案教学设计
- ScrollView嵌套StackView提示需要宽度和高度限制
- 直接插入排序及优化(二分查找插入排序)
- python运用ico图标_如何优雅地处理Django中的favicon.ico图标详解
- 【李宏毅2020 ML/DL】P12 Brief Introduction of Deep Learning
- matlab中k-means算法_机器学习 | KMeans聚类分析详解
- crossentropy java_示例CrossEntropyLoss用于pytorch中的3D语义分段
- 挖金矿问题java课程设计_Win32 挖金矿游戏源代码
- 数据库学习7 — 嵌套查询
- 华为 FTTB(大ONU)修改同时节目观看数
- 银河麒麟系统共享打印机方法
- 软件测试行业前景到底如何?告诉你实情!
- JAVA 正则表达式 (超详细)
- java qq协议 php_PHP使用SMTP协议发送邮件
- matlab读mp4截图或转gif
- iTOP-4418开发板兼容八核6818开发板介绍
- Linux下解压命令兼tar命令详解