mapinfo mif/mid文件格式详解
MapInfo MIF/MID file format description
(from Appendix A of MapInfo Reference)
This appendix describes the data interchange format for MapInfo. In this
appendix, you will find information on:
MIF File header mif文件头
MIF Data Section mif 数据区
Pen, Brush, Symbol, and Font Codes in MIF 画笔,画刷,字体代码
MID File
This versatile format allows generic data to be attached to a variety of
graphical items. It's ASCII, so it is editable, relatively easy to generate,
and works on all platforms supported by MapInfo. Perhaps the best way to
understand the MapInfo Interchange Format (MIF) is to study the sample file
at the end of this appendix in conjunction with the explanation of the file
format. You can also create samples of your own by exporting files to MIF and
then examining those files in a text editor.
Mapinfo data is in two file -- the graphics reside in a .MIF file and textual
data is contained in a .MID file. The textual data is delimited data, with
one row per record and either Carriage Return, Carriage Return plus Line Feed,
or Line Feed between lines. The MIF file has two areas -- the file header are
and the data section. Information on how to create MapInfo tables is in the
header; the graphical object definitions are in the data section.
MIF FILE HEADER
This is a description of MIF file header with optional information in square
brackets.
Version n
Charset "characterSetName"
[ DELIMITER "<c>" ]
[ UNIQUE n,n.. ]
[ INDEX n,n.. ]
[ COORDSYS... ]
[ TRANSFORM... ]
COLUMNS n
<name> <type>
<name> <type>
…
…
DATA
Version
The Version clause states whether you are using VERSION 1, VERSION 2, or
VERSION 300 of the format. Version 300, introduced with Mapinfo 3.0, allows
multiple-section polyline objects.
Charset
The Charset clause specifies which character set was used to create text in
the table. For example: Specify "WindowsLatin1" to indicate that the file was
created using the Windows US & Western Europe character set; specify
"MacRoman" to specify the Macintosh US & Western Europe character set; or
specify "Neutral" to avoid converting the text into another character set.
If you are not using one of these character sets, you can determine the
correct syntax for your character set by exporting a table and examining the
.MIF file in a text editor.
Delimiter
Specify the delimiting character in quotation marks, for example:
DELIMITER ";"
The default delimiter is Tab; if you are using the default, you do not need
the DELIMITER line.
Unique
Specify a number. This number refers to a database column; 3 is the third
column, 7 is the seventh column, and so forth. What happens to column in the
UNIQUE list is subtle. For example, imagine that you have a database with
highways in it. Each highway has only one name, but it might be represented
by several segments. You would put the NAME column in the UNIQUE list, while
the column containing data for the individual segments would not be in that
list. This has the effect of creating two related tables; one with names,
and one with the other attributes of the objects. This is how MapInfo's
various street maps (StreetInfo) are prepared.
Index
To indicate that columns in the table are indexed, include a number (or a
comma-separated list of numbers) in the Index clause. Each number refers to
a database column; 3 is the third column, 7 is the seventh column, and so
forth. Columns in the INDEX list will have indexes prepared for them.
CoordSys Clause
Specify the COORDSYS clause to note that the data is not stored in
longitude/latitude form. When no COORDSYS clause is specified, data is
assumed to be stored in longitude/latitude forms. All coordinates are stored
with respect to the northeast quadrant. The coordinates for points in the
United States have a negative X while coordinates for points in Europe (east
of Greenwich) have a positive X coordinates for points in the Northern
hemisphere have a positive Y while coordinates for points in the Southern
hemisphere have a negative Y.
Syntax 1:
CoordSys Earth
[ Projection type,
datum,
unitname
[,origin_longtitude ]
[,origin_lattitude ]
[,standard_parallel_1
[,standard_parallel_2]]
[,azimuth ]
[,scale_factor ]
[,false_easting ]
[,false_northing]
[,range ]]
[ Bounds (minx,miny) (maxx,maxy) ]
Syntax 2:
CoordSys Nonearth
Units unitname
Bounds (minx,miny) (maxx,maxy)
Transform Clause
When you have MIF files with coordinates stored with respect to the northwest
quadrant (quadrant 2), you can transform them to northeast quadrant
(quadrant 1) with a transform clause.
--------------------------------------------
| Quadrant 2: | Quadrant 1: |
| Nortwest Quadrant | Norteast Quadrant |
--------------------------------------------
| Quadrant 3: | Quadrant 2: |
| Southwest Quadrant | Southeast Quadrant |
--------------------------------------------
The transofrm clause has the following syntax:
TRANSFORM Xmultiplier, Ymultiplier, Xdisplacement, Ydisplacement
To transform quadrant 2 data into quadrant 1 data, use the following
transform clause:
TRANSFORM -1,0,0,0
The zeroes instruct MapInfo to ignore that parameter.
When you have an application which creates MIF files in quadrant 2, you can:
Add the TRANSFORM clause to the MIF files
Change the application so that it creates coordinates in quadrant 1
Change the application so that it adds a TRANSFORM clause to the MIF
Files
Columns
Specify the number of column. Then, for each column, create a row containing
the column name, the column type, and, for character and decimal columns, a
number to indicate the width of the field. Valid column types are:
char(width) integer (which is 4 bytes)
smallint (which is 2 bytes, so it can only store numbers between
-32767 and +32767) decimal (width, decimals) float
date logical
This is an example of the columns section of the header: COLUMNS 34
STATE char (15)
POPULATION integer
AREA decimal (8,4)
For the database specified in this header, the MID file has three columns:
a 15 character field that represents the STATE column,
an integer field that represents the POPULATION column,
an AREA column that consists of a decimal field with up to 8 total
and 4 character after the decimal.
MIF DATA SECTION
The data section of the MIF file follows the header and must be introduced
with DATA on a single line:
DATA
The data section of the MIF file can have any number of graphical primitives,
one for each graphic object. MapInfo matches up entries in the MIF and MID
files, associating the first object in the MIF file with the first row in the
MID file, the second object in the MIF file with the second row in the MID
file, and so on.
When there is no graphic object corresponding to a particular row in the MID
file, a "blank" object (NONE) must be written as a place holder in the
corresponding place in the MIF file.
NONE
The graphical objects that can be specified are:
point
line
polyline
region
arc
text
rectangle
rounded rectangle
ellipse
A point object takes two parameters; an X coordinate and a Y coordinate. As an
option, specify the symbol that represents the point. Symbols are designated
by numbers. If you omit the SYMBOL clause, the current symbol is used.
POINT x y
[ SYMBOL (shape, color, size) ]
MapInfo 4.0 also supports two variations on the SYMBOL clause; see Symbol
discussion later in this appendix.
A line object requires four parameters; an X and a Y coordinate for each end
point. As an option, specify a pen type. When no pen type is specified,
the current pen type is used.
LINE x1 y1 x2 y2
[ PEN (width, pattern, color) ]
A polyline object consists of one or more sections. If the polyline has more
than one section, include the MULTIPLE keyword, followed by the number of
sections. For each section, specify a numpts argument (which indicates the
number of nodes in that section), followed by an x/y coordinate pair for each
node. Use the optional PEN clause (described later in this appendix) to
specify the line style. If you include the optional SMOOTH keyword, the
polyline is smoothed.
PLINE [ MULTIPLE numsections ]
numpts1
x1 y1
x2 y2
…
…
[ numpts 2
x1 y1
x2 y2 ]
…
…
[ PEN (width, pattern, color) ]
[ SMOOTH ]
A region object consists of one or more polygons. Specify the number of
polygons through the numpolygons argument (immediately after the REGION
keyword). For each polygon, specify a numpts argument (which indicates the
number of nodes in that polygon), followed by an x/y coordinate pair for each
node. Use the optional PEN and BRUSH clauses (described later in this
appendix) to specify the object's style. Use the optional CENTER clause to
define the object's centroid explicitly.
REGION numpolygons
numpts1
x1 y1
x2 y2
…
…
[ numpts 2
x1 y1
x2 y2
…
…
[ PEN (width, pattern, color) ]
[ BRUSH (pattern, forecolor, backcolor) ]
[ CENTER x y ]
An arc requires the diagonally opposite corners of its bounding rectangle
and the beginning (a) and ending (b) angles of the arc in degrees, moving
counter-clockwise with zero at three o'clock. As an option, specify the arc
type. (An arc specifies a section of an ellipse, the corners of which are
determined by the bounding rectangle.)
ARC x1 y1 x2 y2
a b
[ PEN (width, pattern, color) ]
A text object consists of a text string, up to 255 characters long. To make
the text string wrap onto multiple lines, insert the characters \n within the
textstring argument (e.g. "First line \nSecond line \nThird line"). The x1,
y1, x2, and y2 arguments specify the location of the text on the map.
Spacing can be 1.0 (single spacing), 1.5, or 2.0 (double spacing). Use the
Font clause (described later in this chapter) to control the typeface, etc.
TEXT "textstring"
x1 y1 x2 y2
[ FONT... ]
[ Spacing {1.0 | 1.5 | 2.0} ]
[ Justify {Left | Center | Right } ]
[ Angle text_angle ]
[ Label Line {simple | arrow} x y ]
A rectangle requires the coordinates of the diagonally opposite corners. As
an option, specify pen and brush types.
RECT x1 y1 x2 y2
[ PEN (width, pattern, color) ]
[ BRUSH (pattern, forecolor, backcolor) ]
A rounded rectangle requires the coordinates of the diagonally opposite
corners and the degree of rounding (a). As an option, specify pen and brush
types. Degree of rounding is expressed in coordinate units.
ROUNDRECT x1 y1 x2 y2
a
[ PEN (width, pattern, color) ]
[ BRUSH (pattern, forecolor, backcolor) ]
An ellipse object requires the coordinates of the diagonally opposite corners
of its bounding rectangle. As an option, specify pen and brush types.
ELLIPSE x1 y1 x2 y2
[ PEN (width, pattern, color) ]
[BRUSH (pattern, forecolor, backcolor) ]
PEN STYLES
The Pen clause specifies the width, pattern, and color of a linear object,
such as a line, polyline or arc. The Pen clause has the following syntax:
PEN (width, pattern, color)
Width is a number from zero to 7. Note: zero-width lines are invisible.
Color is an integer, representing a 24-bit RGB color value.
Pattern is an integer from 1 to 77; patter number 1 is invisible.
Due to a limitness of a text file patterns cannot be shown, however they are
available in MapInfo Refernce book. More info can be obtained by contacting
MapInfo. (http://www.mapinfo.com on internet)
BRUSH STYLES
Brush specifies the pattern, foreground color, and background color of a
filled object, such as a circle or region. The Brush clause has the following
syntax:
BRUSH (pattern, forecolor [, backcolor ] )
The forecolor and backcolor arguments are both integers, representing 24-bit
RGB color values.
Pattern is a number from 1 to 71. Note: Pattern number 1 is "no fill," and
pattern number 2 is a solid fill. Pattern numbers 9-11 are reserved.
Tip: To specify a transparent fill style, use pattern number three or larger,
and omit the backcolor argument. For example: Brush( 5, 255 )
Due to a limitness of a text file patterns cannot be shown, however they are
available in MapInfo Refernce book. More info can be obtained by contacting
MapInfo. (http://www.mapinfo.com on internet)
SYMBOL STYLES
The Symbol clause specifies the appearance of a Point object. There are
three different forms of the Symbol clause, described below.
Symbol Clause -- MapInfo 3.0 Syntax
The Symbol clause specifies the appearance of a Point object. There are
three different forms of the Symbol clause. To specify a symbol style using
"Old MapInfo Symbols" (the symbols that were used in earlier version of
MapInfo), use the following syntax:
SYMBOL (shape, color, size)
The shape argument is an integer value, 31 or larger; 31 represents a blank
symbol (i.e. the object will not be visible). The standard set of symbols
includes symbols 32 through 67, inclusive, but the user can customize the
symbol set by using the Symbol application.
The color argument is an integer representing a 24-bit RGB color value.
The size argument is an integer from 1 to 48, representing a point size.
The following table lists the default symbols provided with Mapinfo:
Due to a limitness of a text file symbols cannot be shown, however they are
available in MapInfo Refernce book. More info can be obtained by contacting
MapInfo. (http://www.mapinfo.com on internet)
Symbol Clause -- TrueType Font Syntax
To specify a symbol style based on a character from a TrueType font, use
the following syntax:
SYMBOL (shape, color, size, fontname, fontstyle, rotation)
The fontstyle argument is an integer that controls settings such as Bold.
The following table lists the values you can use as fontstyle.
------------------------------------------------------------------------------
fontstyle value Effect on Symbol style
------------------------------------------------------------------------------
0 Plain text
1 Bold text
16 Black border around symbol
32 Drop shadow
256 White border around symbol
------------------------------------------------------------------------------
To specify two or more style attributes, add the values from the lef column.
For example, to specify Bold and Drop Shadow, use 33.
The rotation argument is a floating-point number, representing a rotation
angle, in degrees.
Symbol clause - Custom Bitmap File Syntax
To specify a symbol style based on a character from a TrueType font, use the
following syntax:
SYMBOL (filename, color, size, customstyle)
The filename argument is a text string that identifies a bitmap file (e.g.
"Arrow.BMP") in the CustSymb directory.
The customstyle argument is an integer that controls whether color and
background attributes are used. The following table lists the values
you can use as customstyle:
------------------------------------------------------------------------------
customstyle value Effect on Symbol style
------------------------------------------------------------------------------
0 Both the Shadow Background setting and the
Apply Color setting are off; symbol appears
in default states. White pixels in the bitmap
appear transparent, allowing whatever is
behind the symbol to show through.
1 The Show Background setting is on; white
pixels in the image are opaque.
2 The Apply Color setting is on; non-white
colors in the image are replaced with the
Symbol's color value.
3 Both Show Background and Apply Color settings
are on.
------------------------------------------------------------------------------
FONT STYLES
The Font clause specifies the appearance (typeface, color, etc.) or text
objects. The Font clause has the following syntax:
FONT ("fontname", style, size, forecolor [, backcolor] )
Fontname in double quotation marks is the typeface to be displayed. Style is
the text attribute of the typeface as shown in the following table. Size
must be 0 in a MIF file, because each text object on a Map is attached to
the map itself (thus the text size changes as you zoom in or out). Forecolor
is an integer representing a 24-bit RGB color. The background color is
optional; if you include it, MapInfo fills the are behind the text with the
color you specify.
------------------------------------------------------------------------------
style value Effect on Font Appearance
------------------------------------------------------------------------------
0 Plain 1 Bold
2 Italic 4 Underline
16 Outline (only supported on the Macintosh)
32 Shadow 256 Halo
512 All Caps 1024 Expanded
------------------------------------------------------------------------------
To specify two or more style attributes, add the values from the left column.
For example, to specify Bold and All Caps, use 513.
COLORS
Colors are often defined in relative concentractions of red, green, and blue.
Each color is a number from 0 to 255, inclusive; the RGB value of a color is
calculated by the following formula:
(red * 65536) + (green * 256) + blue
These are some often used colors and their values:
Red: 16711680
Green: 65280
Blue: 255
Cuan: 65535
Magenta: 16711935
Yellow: 16776960
Black: 0
MID FILE
The MID file contains data, one record of data per row, delimited by the
character specified in the delimiter statement. The default delimiter is
Tab. Each row in the MID file is associated with a corresponding object in
the MIF file; first row with first object, second row with second object.
If delimiter character is included as part of the data in a field, enclose
the field in quotation marks.
The MID file is an optional file. When ther is no MID file, all fields are blank
mapinfo mif/mid文件格式详解相关推荐
- S19文件格式详解(总结)以及与hex文件的互转
S19文件格式详解 S-record格式文件是Freescale CodeWarrior编译器生成的后缀名为.S19的程序文件,是一段直接烧写进MCU的ASCII码,英文全称问Motoro ...
- MP4文件格式详解——文件类型ftyp
原谅地址:http://blog.csdn.net/pirateleo/article/details/7583321 文件类型ftyp(ISO-14496-12) Author:Pirate Leo ...
- MP4文件格式详解——文件类型ftyp(转)
文件类型ftyp(ISO-14496-12) Author:Pirate Leo Email:codeevoship@gmail.com ISO 14496 - 12 定义了一种封装媒体数据的基础文件 ...
- 多媒体 MP4文件格式详解——文件类型ftyp
ISO 14496 - 12 定义了一种封装媒体数据的基础文件格式,mp4.3gp.ismv等我们常见媒体封装格式都是以这种基础文件格式为基础衍生的. 如果从全局角度了解基础文件格式,请看我之前的博文 ...
- MP4文件格式详解——结构概述
MP4文件格式详解(ISO-14496-12/14) 一.基本概念 1. 文件,由许多Box和FullBox组成. 2. Box,每个Box由Header和Data组成. 3. FullBox,是Bo ...
- S19文件格式详解(1)
1.记录结构 0 1 2 3 4 5 S Type Byte Count Address Data Checksum 一个SREC格式文件包含一系列ASCLL格式的的数据.具体如下: Record t ...
- Ffmpeg快速命令使用 Ffmpeg选项详解 Ffmepg格式详解 常见视频文件格式详解
http://www.ffmpeg.com.cn/index.php/%E9%A6%96%E9%A1%B5 Ffmpeg快速命令使用 From Ffmpeg工程组 Jump to: navigatio ...
- ZIP文件格式详解(一)——文件数据格式
ZIP文件格式详解(一)--文件数据格式 ------------------------------------------------------------------------------- ...
- MP4文件格式详解——元数据moov(二)tkhd box
ISO 14496 - 12 定义了一种封装媒体数据的基础文件格式,mp4.3gp.ismv等我们常见媒体封装格式都是以这种基础文件格式为基础衍生的. 如果从全局角度了解基础文件格式,请看我之前的博文 ...
最新文章
- 添加Soap头来增加Web Service的安全性
- 超全面的JavaWeb笔记day02CSSJavaScript
- sdut 1028 Catch That Cow( BFS)
- Oracle查看死锁 .
- 单碟1.75T 西数14TB充氦硬盘今年上
- 检查DISPLAY设置时Xlib出现No protocol specified错误
- 【转】建立一个更高级别的查询 API:正确使用Django ORM 的方式
- Oracle----oracle小知识总结
- 2020年美赛C题(数据分析题)O奖论文笔记 (2)
- ASCII码判断大小
- 转载——傅里叶变换概念及公式推导
- 手动安装virtualbox增强功能
- 大数据,云计算,人工智能之间的关系
- c语言课程设计作业医院挂号系统,c语言课程设计机房机位预定系统绝对正确,附源代码...
- 转:__stack_chk_fail栈检查失败
- Windows下PostgreSQL 8.1版安装图解
- svc的参考文献_浅谈SVC的原理及作用
- 计算机科学与技术考研双非,985弱势“好考”专业与双非王牌专业大汇总!考研报考必备!...
- 达达-京东到家完成新一轮5亿美金融资,沃尔玛、京东分别增持
- 初学Python出现EnvironmentLocationNotFound: Not a conda environment: /anaconda3/envs/anaconda3
热门文章
- linux 下执行shutdown.sh命令不能关闭tomcat进程的解决方法
- json mysql 字段 默认值_MySQL新增JSON类型字段的使用总结
- linux自动关机取消命令,linux关机命令【使用思路】
- oracle关闭参数,在Oracle关闭情况下如何修改spfile的参数
- 29【定时器和延时器】
- TM1637驱动4位时钟数码管的Arduino 程序
- Matlab声音处理教程
- php 用count 变量,countif函数的使用方法 PHP的可变变量名的使用方法分享
- (要更新)SRAM、DRAM、SDRAM、DDR异同
- JavaScript设计模式总汇