大纲一、安装方式分类

二、具体安装方式详解源码安装

通用二进制包安装

RPM包安装

一、Mysql安装方式分类

1.源码包安装

从MySQL5.5开始就要用cmake安装了，已不能用./configure编译安装，我们查看一下mysql5.6.12的安装目录，从下面的安装目录我们可以看到，里面根本没有configure文件，下面我们来说说cmake，

[root@mysql mysql-5.6.12]# ls

BUILD config.h.cmake extra libmysqld packaging sql-bench unittest

BUILD-CMAKE configure.cmake include libservices plugin sql-common VERSION

client COPYING INSTALL-SOURCE man README storage vio

cmake dbug INSTALL-WIN-SOURCE mysql-test regex strings win

CMakeLists.txt Docs libevent mysys scripts support-files zlib

cmd-line-utils Doxyfile-perfschema libmysql mysys_ssl sql tests

cmake的重要特性之一是其独立于源码(out-of-source)的编译功能，即编译工作可以在另一个指定的目录中而非源码目录中进行，这可以保证源码目录不受任何一次编译的影响，因此在同一个源码树上可以进行多次不同的编译，如针对于不同平台编译。

2.通用二进制包安装

通用二进制包安装说明软件包已经编译好，不需要我们重新编译，我们只要解压一下，进行简单配置便可以运行使用！

3.RPM包安装

这个安装我们不过多说明，大家应该都知道！好了，下面我们就来具体说明这三种安装！

二、具体安装方式详解源码安装

通用二进制包安装

RPM包安装

源码包安装

1.安装cmake(最新的cmake-2.8.11.2)[root@mysql src]# tar xf cmake-2.8.11.2.tar.gz

[root@mysql src]# cd cmake-2.8.11.2

[root@mysql cmake-2.8.11.2]# ls

bootstrap CTestCustom.cmake.in

ChangeLog.manual CTestCustom.ctest.in

ChangeLog.txt DartConfig.cmake

CMakeCPack.cmake DartLocal.conf.in

CMakeCPackOptions.cmake.in Docs

CMakeGraphVizOptions.cmake doxygen.config

CMakeLists.txt Example

CMakeLogo.gif Modules

cmake_uninstall.cmake.in Readme.txt

CompileFlags.cmake Source

configure Templates

Copyright.txt Tests

CTestConfig.cmake Utilities

[root@mysql cmake-2.8.11.2]# ./bootstrap

[root@mysql cmake-2.8.11.2]# make && make install

2.安装编译MySQL-5.6.12

说明：cmake指定编译选项的方式不同于make，其实现方式对比如下

./configure 对应的是 cmake .

./configure --help 对应的是 cmake . -LH 或者是 ccmake .

3.创建mysql的用户与组[root@mysql ~]# groupadd -r mysql

[root@mysql ~]# useradd -g mysql -r -s /sbin/nologin mysql

4.创建mysql的数据目录(创建逻辑卷存放数据)

[root@mysql ~]# fdisk /dev/sda #创建一个新分区类型为8e

Command (m for help): p

Disk /dev/sda: 21.5 GB, 21474836480 bytes

255 heads, 63 sectors/track, 2610 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x0000a0a2

Device Boot Start End Blocks Id System

/dev/sda1 * 1 26 204800 83 Linux

Partition 1 does not end on cylinder boundary.

/dev/sda2 26 1301 10240000 83 Linux

/dev/sda3 1301 1938 5120000 83 Linux

/dev/sda4 1938 2611 5405696 5 Extended

/dev/sda5 1939 2066 1024000 82 Linux swap / Solaris

/dev/sda6 1938 1938 1129+ 83 Linux

/dev/sda7 2066 2327 2099724 8e Linux LVM

[root@mysql ~]# partx -a /dev/sda #让内核重新读取一下分区

BLKPG: Device or resource busy

error adding partition 1

BLKPG: Device or resource busy

error adding partition 2

BLKPG: Device or resource busy

error adding partition 3

BLKPG: Device or resource busy

error adding partition 4

BLKPG: Device or resource busy

error adding partition 5

[root@mysql ~]# fdisk -l #查看新建的分区

Disk /dev/sda: 21.5 GB, 21474836480 bytes

255 heads, 63 sectors/track, 2610 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x0000a0a2

Device Boot Start End Blocks Id System

/dev/sda1 * 1 26 204800 83 Linux

Partition 1 does not end on cylinder boundary.

/dev/sda2 26 1301 10240000 83 Linux

/dev/sda3 1301 1938 5120000 83 Linux

/dev/sda4 1938 2611 5405696 5 Extended

/dev/sda5 1939 2066 1024000 82 Linux swap / Solaris

/dev/sda6 1938 1938 1129+ 83 Linux

/dev/sda7 2066 2327 2099724 8e Linux LVM

Partition table entries are not in disk order

[root@mysql ~]# yum install -y lvm2 #安装lvm

[root@mysql ~]# pvcreate /dev/sda7 #创建物理卷

Physical volume "/dev/sda7" successfully created

[root@mysql ~]# vgcreate myvg /dev/sda7 #创建卷组

Volume group "myvg" successfully created

[root@mysql ~]# lvcreate -L 1G -n mydata myvg #创建逻辑卷

Logical volume "mydata" created

[root@mysql ~]# lvs #查看逻辑卷

LV VG Attr LSize Pool Origin Data% Move Log Cpy%Sync Convert

mydata myvg -wi-a---- 1.00g

[root@mysql ~]# mkfs.ext4 /dev/myvg/mydata #格式化

mke2fs 1.41.12 (17-May-2010)

文件系统标签=

操作系统:Linux

块大小=4096 (log=2)

分块大小=4096 (log=2)

Stride=0 blocks, Stripe blocks

65536 inodes, 262144 blocks

13107 blocks (5.00%) reserved for the super user

第一个数据块=0

Maximum filesystem blocks=268435456

8 block groups

32768 blocks per group, 32768 fragments per group

8192 inodes per group

Superblock backups stored on blocks:

32768, 98304, 163840, 229376

正在写入inode表: 完成

Creating journal (8192 blocks): 完成

Writing superblocks and filesystem accounting information: 完成

This filesystem will be automatically checked every 33 mounts or

180 days, whichever comes first. Use tune2fs -c or -i to override.

5.挂载设置[root@mysql ~]# mkdir /mydata #创建挂载目录

[root@mysql ~]# vim /etc/fstab #修改挂载配置文件

#新增一行

/dev/myvg/mydata /mydata ext3 defaults 0 0

[root@mysql ~]# mount -a #挂载

[root@mysql ~]# mount #查看所有挂载

/dev/sda2 on / type ext4 (rw)

proc on /proc type proc (rw)

sysfs on /sys type sysfs (rw)

devpts on /dev/pts type devpts (rw,gid=5,mode=620)

tmpfs on /dev/shm type tmpfs (rw)

/dev/sda1 on /boot type ext4 (rw)

/dev/sda3 on /data type ext4 (rw)

none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)

/dev/mapper/myvg-mydata on /mydata type ext4 (rw)

6.数据目录配置

[root@mysql ~]# cd /mydata/

[root@mysql mydata]# mkdir data

[root@mysql mydata]# chown -R mysql.mysql data

[root@mysql mydata]# ll

总用量 20

drwxr-xr-x 2 mysql mysql 4096 7月 18 13:16 data

drwx------ 2 root root 16384 7月 18 13:10 lost+found

7.编译安装

[root@mysql mysql-5.6.12]# cmake . -DCMAKE_INSTALL_PREFIX=/usr/local/mysql \

-DMYSQL_DATADIR=/mydata/data \

-DSYSCONFDIR=/etc \

-DWITH_INNOBASE_STORAGE_ENGINE=1 \

-DWITH_ARCHIVE_STORAGE_ENGINE=1 \

-DWITH_BLACKHOLE_STORAGE_ENGINE=1 \

-DWITH_READLINE=1 \

-DWITH_SSL:STRING=bundled \

-DWITH_ZLIB:STRING=bundled \

-DWITH_LIBWRAP=0 \

-DMYSQL_UNIX_ADDR=/tmp/mysql.sock \

-DDEFAULT_CHARSET=utf8 \

-DDEFAULT_COLLATION=utf8_general_ci

报错，

[root@mysql mysql-5.6.12]# cmake . -DCMAKE_INSTALL_PREFIX=/usr/local/mysql -DMYSQL_DATADIR=/mydata/data -DSYSCONFDIR=/etc -DWITH_INNOBASE_STORAGE_ENGINE=1 -DWITH_ARCHIVE_STORAGE_ENGINE=1 -DWITH_BLACKHOLE_STORAGE_ENGINE=1 -DWITH_READLINE=1 -DWITH_SSL=bundled -DWITH_ZLIB=bundled -DWITH_LIBWRAP=0 -DMYSQL_UNIX_ADDR=/tmp/mysql.sock -DDEFAULT_CHARSET=utf8 -DDEFAULT_COLLATION=utf8_general_ci

-- Running cmake version 2.8.11.2

-- MySQL 5.6.12

-- Packaging as: mysql-5.6.12-Linux-x86_64

-- HAVE_VISIBILITY_HIDDEN

CMake Error at cmake/ssl.cmake:164 (FILE):

file STRINGS file "/root/src/mysql-5.6.12/OPENSSL_INCLUDE_DIR-NOTFOUND/openssl/opensslv.h"

cannot be read.

Call Stack (most recent call first):

CMakeLists.txt:323 (MYSQL_CHECK_SSL)

-- OPENSSL_INCLUDE_DIR = OPENSSL_INCLUDE_DIR-NOTFOUND

-- OPENSSL_LIBRARY = OPENSSL_LIBRARY-NOTFOUND

-- CRYPTO_LIBRARY = CRYPTO_LIBRARY-NOTFOUND

-- OPENSSL_MAJOR_VERSION =

CMake Error at cmake/ssl.cmake:231 (MESSAGE):

Cannot find appropriate system libraries for SSL. Use WITH_SSL=bundled to

enable SSL support

Call Stack (most recent call first):

CMakeLists.txt:323 (MYSQL_CHECK_SSL)

-- HAVE_VISIBILITY_HIDDEN

-- HAVE_VISIBILITY_HIDDEN

-- Could NOT find Curses (missing: CURSES_LIBRARY CURSES_INCLUDE_PATH)

CMake Error at cmake/readline.cmake:85 (MESSAGE): Curses library not found. Please install appropriate package,

remove CMakeCache.txt and rerun cmake.On Debian/Ubuntu, package name is libncurses5-dev, on Redhat and derivates it is ncurses-devel.

Call Stack (most recent call first):

cmake/readline.cmake:128 (FIND_CURSES)

cmake/readline.cmake:202 (MYSQL_USE_BUNDLED_EDITLINE)

CMakeLists.txt:325 (MYSQL_CHECK_EDITLINE)

-- Configuring incomplete, errors occurred!

从上面的错误中我们可以很清楚的看到缺少两个依赖包，我们用yum安装一下即可！[root@mysql mysql-5.6.12]# yum install –y openssl openssl-devel ncurses ncurses-devel

下面我们再次编译一下，可能还会报同样的错误，不要着急，遇到错误，应该是很欣慰，现在知道了，以后就有把握自己处理，不必再百度，谷歌，满世界询问了，嘿嘿！

[root@mysql mysql-5.6.12]# cmake . -DCMAKE_INSTALL_PREFIX=/usr/local/mysql -DMYSQL_DATADIR=/mydata/data -DSYSCONFDIR=/etc -DWITH_INNOBASE_STORAGE_ENGINE=1 -DWITH_ARCHIVE_STORAGE_ENGINE=1 -DWITH_BLACKHOLE_STORAGE_ENGINE=1 -DWITH_READLINE=1 -DWITH_SSL=bundled -DWITH_ZLIB=bundled -DWITH_LIBWRAP=0 -DMYSQL_UNIX_ADDR=/tmp/mysql.sock -DDEFAULT_CHARSET=utf8 -DDEFAULT_COLLATION=utf8_general_ci

-- Running cmake version 2.8.11.2

-- MySQL 5.6.12

-- Packaging as: mysql-5.6.12-Linux-x86_64

-- HAVE_VISIBILITY_HIDDEN

CMake Error at cmake/ssl.cmake:164 (FILE):

file STRINGS file "/root/src/mysql-5.6.12/OPENSSL_INCLUDE_DIR-NOTFOUND/openssl/opensslv.h"

cannot be read.

Call Stack (most recent call first):

CMakeLists.txt:323 (MYSQL_CHECK_SSL)

-- OPENSSL_INCLUDE_DIR = OPENSSL_INCLUDE_DIR-NOTFOUND

-- OPENSSL_LIBRARY = OPENSSL_LIBRARY-NOTFOUND

-- CRYPTO_LIBRARY = CRYPTO_LIBRARY-NOTFOUND

-- OPENSSL_MAJOR_VERSION =

CMake Error at cmake/ssl.cmake:231 (MESSAGE):

Cannot find appropriate system libraries for SSL. Use WITH_SSL=bundled to

enable SSL support

Call Stack (most recent call first):

CMakeLists.txt:323 (MYSQL_CHECK_SSL)

-- HAVE_VISIBILITY_HIDDEN

-- HAVE_VISIBILITY_HIDDEN

-- Could NOT find Curses (missing: CURSES_LIBRARY CURSES_INCLUDE_PATH)

CMake Error at cmake/readline.cmake:85 (MESSAGE): Curses library not found. Please install appropriate package,

remove CMakeCache.txt and rerun cmake.On Debian/Ubuntu, package name is libncurses5-dev, on Redhat and derivates it is ncurses-devel.

Call Stack (most recent call first):

cmake/readline.cmake:128 (FIND_CURSES)

cmake/readline.cmake:202 (MYSQL_USE_BUNDLED_EDITLINE)

CMakeLists.txt:325 (MYSQL_CHECK_EDITLINE)

-- Configuring incomplete, errors occurred!

这里是因为，我们在多次运行cmake有个文件我们需要删除，删除当前目录下CMakeCache.txt文件并重新编译，再次运行cmake命令就会正常！

[root@mysql mysql-5.6.12]# rm -rf CMakeCache.txt

[root@mysql mysql-5.6.12]# cmake . -DCMAKE_INSTALL_PREFIX=/usr/local/mysql -DMYSQL_DATADIR=/mydata/data -DSYSCONFDIR=/etc -DWITH_INNOBASE_STORAGE_ENGINE=1 -DWITH_ARCHIVE_STORAGE_ENGINE=1 -DWITH_BLACKHOLE_STORAGE_ENGINE=1 -DWITH_READLINE=1 -DWITH_SSL=bundled -DWITH_ZLIB=bundled -DWITH_LIBWRAP=0 -DMYSQL_UNIX_ADDR=/tmp/mysql.sock -DDEFAULT_CHARSET=utf8 -DDEFAULT_COLLATION=utf8_general_ci

这下我们就可以顺利编译！[root@mysql mysql-5.6.12]# make && make install

8.编译选项说明

指定安装文件的安装路径时常用的选项-DCMAKE_INSTALL_PREFIX=/usr/local/mysql ----指定残可安装路径(默认的就是/usr/local/mysql)

-DMYSQL_DATADIR=/data/mysql ----mysql的数据文件路径

-DSYSCONFDIR=/etc ----配置文件路径

编译过程中启用其他存储引擎时指令介绍-DWITH_INNOBASE_STORAGE_ENGINE=1 ----使用INNOBASE存储引擎

-DWITH_ARCHIVE_STORAGE_ENGINE=1 ----常应用于日志记录和聚合分析，不支持索引

-DWITH_BLACKHOLE_STORAGE_ENGINE=1 ----黑洞存储引擎

编译过程中取消一些存储引擎指令介绍-DWITHOUT__STORAGE_ENGINE=1

示例如下：

-DWITHOUT_EXAMPLE_STORAGE_ENGINE=1

-DWITHOUT_FEDERATED_STORAGE_ENGINE=1

-DWITHOUT_PARTITION_STORAGE_ENGINE=1

编译进过程中功能启用的指令介绍-DWITH_READLINE=1 ----支持批量导入mysql数据

-DWITH_SSL=system ----mysql支持ssl会话，实现基于ssl的数据复

-DWITH_ZLIB=system ----压缩库

-DWITH_LIBWRAP=0 ----是否可以基于WRAP实现访问控制

其他功能指令-DMYSQL_TCP_PORT=3306 ----默认端口

-DMYSQL_UNIX_ADDR=/tmp/mysql.sock ----默认套接字文件路径

-DENABLED_LOCAL_INFILE=1 ----是否启用LOCAL_INFILE功能

-DEXTRA_CHARSETS=all ----是否支持额外的字符集

-DDEFAULT_CHARSET=utf8 ----默认编码机制

-DDEFAULT_COLLATION=utf8_general_ci ----设定默认语言的排序规则

-DWITH_DEBUG=0 ----DEBUG功能设置

-DENABLE_PROFILING=1 ----性能分析功能是否启用

9.mysql服务脚本[root@mysql mysql-5.6.12]# cp support-files/mysql.server /etc/init.d/mysqld #复制脚本

[root@mysql mysql-5.6.12]# chmod +x /etc/init.d/mysqld #增加可执行权限

[root@mysql ~]# chkconfig --add mysqld #增加至sysV服务

[root@mysql ~]# chkconfig mysqld on #开机自启动

10.初始化mysql[root@mysql ~]# /usr/local/mysql/scripts/mysql_install_db --datadir=/mydata/data --user=mysql

FATAL ERROR: Could not find ./bin/my_print_defaults

If you compiled from source, you need to run 'make install' to

copy the software into the correct location ready for operation.

If you are using a binary release, you must either be at the top

level of the extracted archive, or pass the --basedir option

pointing to that location.

出错！解决方法如下，[root@mysql data]# /usr/local/mysql/scripts/mysql_install_db --basedir=/usr/local/mysql --datadir=/mydata/data --user=mysql #mysql初始化

说明初始化时得，增加 --basedir选项[root@mysql data]# ls #查看生成的文件

ibdata1 ib_logfile0 ib_logfile1 mysql performance_schema test

[root@mysql data]# cd /usr/local/mysql/

[root@mysql mysql]# ls

bin data include lib my.cnf README share support-files

COPYING docs INSTALL-BINARY man mysql-test scripts sql-bench

#在/usr/local/mysql目录下自动生成my.cnf的配置文件[root@mysql mysql]# cat my.cnf #查看一下配置文件

# For advice on how to change settings please see

# http://dev.mysql.com/doc/refman/5.6/en/server-configuration-defaults.html

[mysqld]

# Remove leading # and set to the amount of RAM for the most important data

# cache in MySQL. Start at 70% of total RAM for dedicated server, else 10%.

# innodb_buffer_pool_size = 128M

# Remove leading # to turn on a very important data integrity option: logging

# changes to the binary log between backups.

# log_bin

# These are commonly set, remove the # and set as required.

# basedir = .....

# datadir = .....

# port = .....

# server_id = .....

# socket = .....

# Remove leading # to set options mainly useful for reporting servers.

# The server defaults are faster for transactions and fast SELECTs.

# Adjust sizes as needed, experiment to find the optimal values.

# join_buffer_size = 128M

# sort_buffer_size = 2M

# read_rnd_buffer_size = 2M

sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES

11.修改mysql配置文件[root@mysql mysql]# vim my.cnf

#增加如下内容

binlog-format=ROW

log-bin=master-bin.log

log-slave-updates=true

gtid-mode=on

enforce-gtid-consistency=true

master-info-repository=TABLE

relay-log-info-repository=TABLE

sync-master-info=1

slave-parallel-workers=2

binlog-checksum=CRC32

master-verify-checksum=1

slave-sql-verify-checksum=1

binlog-rows-query-log_events=1

server-id=1

report-port=3306

port=3306

datadir=/mydata/data

socket=/tmp/mysql.sock

report-host=master.magedu.com

12.启动mysql

[root@mysql mysql]# service mysqld start

Starting MySQL... SUCCESS!

13.mysql命令添加到环境变量中root@mysql mysql]# vim /etc/profile.d/mysql.sh

exportPATH=$PATH:/usr/local/mysql/bin

[root@mysql mysql]# source /etc/profile #重新读取环境变量

14.输出mysql的man手册到man命令的查找路径[root@mysql mysql]# vim /etc/man.config

#新增一行

MANPATH /usr/local/mysql/man

15.输出mysql的库文件[root@mysql mysql]# vim /etc/ld.so.conf.d/mysql.conf

/usr/local/mysql/lib/

[root@mysql mysql]# ldconfig -v

/usr/local/mysql/lib:

libmysqlclient.so.18 -> libmysqlclient_r.so.18.0.0

16.输出mysql的头文件到系统头文件

[root@mysql mysql]# ln -sv /usr/local/mysql/include/ /usr/include/mysql

"/usr/include/mysql" -> "/usr/local/mysql/include/"

[root@mysql mysql]# cd /usr/include/mysql/

[root@mysql mysql]# ls

big_endian.h m_string.h my_global.h mysql_embed.h plugin_validate_password.h

byte_order_generic.h my_alloc.h my_list.h mysql.h sql_common.h

byte_order_generic_x86_64.h my_attribute.h my_net.h mysql_time.h sql_state.h

byte_order_generic_x86.h my_byteorder.h my_pthread.h mysql_version.h sslopt-case.h

decimal.h my_compiler.h mysql my_sys.h sslopt-longopts.h

errmsg.h my_config.h mysql_com.h my_xml.h sslopt-vars.h

keycache.h my_dbug.h mysql_com_server.h plugin_audit.h typelib.h

little_endian.h my_dir.h mysqld_ername.h plugin_ftparser.h

m_ctype.h my_getopt.h mysqld_error.h plugin.h

好了到这里mysql的源码安装的配置过程全部完成，下面我们测试一下！

17.测试

1).查看端口[root@mysql mysql]# netstat -ntulp | grep :3306

tcp 0 0 :::3306 :::* LISTEN 41347/mysqld

2).登录mysql[root@mysql mysql]# mysql

Welcome to the MySQL monitor. Commands end with ; or \g.

Your MySQL connection id is 1

Server version: 5.6.12-log Source distribution

Copyright (c) 2000, 2013, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its

affiliates. Other names may be trademarks of their respective

owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> show databases;

+--------------------+

| Database |

+--------------------+

| information_schema |

测试全部完成，下面我们继续说，mysql的通用二进制安装！

通用二进制包安装

1. 准备数据存放的文件系统

说明：新建一个逻辑卷，并将其挂载至特定目录即可。这里假设其逻辑卷的挂载目录为/mydata，而后需要创建/mydata/data目录做为mysql数据的存放目录。

(1). 先确认下系统里是否有LVM工具，默认没有安装[root@web httpd]# rpm -qa | grep lvm

[root@web httpd]# yum install -y lvm2

(2). 查看一下磁盘[root@web httpd]# fdisk -l

Disk /dev/sda: 21.5 GB, 21474836480 bytes

255 heads, 63 sectors/track, 2610 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/Osize (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x0000a0a2

Device Boot Start End Blocks Id System

/dev/sda1* 1 26 204800 83 Linux

Partition 1 does not end on cylinder boundary.

/dev/sda226 1301 10240000 83 Linux

/dev/sda31301 1938 5120000 83 Linux

/dev/sda41938 2611 5405696 5 Extended

/dev/sda51939 2066 1024000 82 Linux swap / Solaris

[root@web httpd]#

(3). 创建逻辑分区[root@web ~]# fdisk /dev/sda

/dev/sda72066 2327 2099724 8e Linux LVM #我这里是测试环境就创建了一个2G分区

[root@web ~]# partx -a /dev/sda #告诉内核有关存在和磁盘上的分区的编号

[root@web ~]# pvcreate /dev/sda7 #创建物理卷

Physical volume "/dev/sda7"successfully created

[root@web ~]# vgcreate myvg /dev/sda7 #创建卷组

Volume group "myvg"successfully created

[root@web ~]#

[root@web ~]# lvcreate -n mydata -L 1G myvg #创建一个1G的逻辑卷

Logical volume "mydata"created

[root@web ~]# lvs

LV VG Attr LSize Pool Origin Data% Move Log Cpy%Sync Convert

mydata myvg -wi-a---- 1.00g

[root@web ~]#

[root@web ~]# mkfs.ext4 /dev/myvg/mydata #格式化

[root@web ~]# mkdir /mydata #创建挂载目录

[root@web ~]# mount /dev/myvg/mydata /mydata/ #挂载

[root@web ~]# vim /etc/fstab

/dev/myvg/mydata/mydataext4 defaults 0 0 #增加这一行

[root@web ~]# mount –a #测试挂载是否成功

[root@web ~]# mount

/dev/sda2on / typeext4 (rw)

proc on /proctypeproc (rw)

sysfs on /systypesysfs (rw)

devpts on /dev/ptstypedevpts (rw,gid=5,mode=620)

tmpfs on /dev/shmtypetmpfs (rw)

/dev/sda1on /boottypeext4 (rw)

/dev/sda3on /datatypeext4 (rw)

none on /proc/sys/fs/binfmt_misctypebinfmt_misc (rw)

/dev/mapper/myvg-mydataon /mydatatypeext4 (rw)

[root@web ~]#

(4). 为了便于管理在/mydata目录下再创建个子目录data用于存放数据[root@web ~]# mkdir /mydata/data

[root@web ~]# ls /mydata/

data lost+found

2. 新建用户以安全方式运行进程[root@web ~]# groupadd -r mysql

[root@web ~]# useradd -g mysql -r -s /sbin/nologin -M -d /mydata/data mysql

[root@web ~]# chown -R mysql:mysql /mydata/data

3. 安装并初始化mysql5.6.12

(1). 通用二进制包安装[root@web src]# tar -xf mysql-5.6.12-linux-glibc2.5-x86_64.tar.gz -C /usr/local/ #-C指定解压目录

[root@web local]# ln -sv mysql-5.6.12-linux-glibc2.5-x86_64/ mysql #创建软链接

`mysql' -> `mysql-5.6.12-linux-glibc2.5-x86_64/'

[root@web local]# cd mysql

[root@web mysql]# ls

bin data include lib mysql-testscripts sql-bench

COPYING docs INSTALL-BINARY manREADME share support-files

[root@web mysql]#

[root@web mysql]# chown -R mysql:mysql . #更改属主属组

[root@web mysql]# ll

total 76

drwxr-xr-x 2 mysql mysql 4096 Jun 29 21:12 bin

-rw-r--r-- 1 mysql mysql 17987 May 21 23:18 COPYING

drwxr-xr-x 3 mysql mysql 4096 Jun 29 21:12 data

drwxr-xr-x 2 mysql mysql 4096 Jun 29 21:12 docs

drwxr-xr-x 3 mysql mysql 4096 Jun 29 21:12 include

-rw-r--r-- 1 mysql mysql 7469 May 21 23:18 INSTALL-BINARY

drwxr-xr-x 3 mysql mysql 4096 Jun 29 21:12 lib

drwxr-xr-x 4 mysql mysql 4096 Jun 29 21:12 man

drwxr-xr-x 10 mysql mysql 4096 Jun 29 21:12 mysql-test

-rw-r--r-- 1 mysql mysql 2496 May 21 23:18 README

drwxr-xr-x 2 mysql mysql 4096 Jun 29 21:12 scripts

drwxr-xr-x 28 mysql mysql 4096 Jun 29 21:12 share

drwxr-xr-x 4 mysql mysql 4096 Jun 29 21:12 sql-bench

drwxr-xr-x 3 mysql mysql 4096 Jun 29 21:12 support-files

(2). 执行mysql 初始化的data存放位置的准备[root@web mysql]# scripts/mysql_install_db --user=mysql --datadir=/mydata/data #执行mysql 初始化的data存放位置的准备

Installing MySQL system tables..../bin/mysqld: error whileloading shared libraries: libaio.so.1: cannot openshared object file: No such fileor directory

#初始化时报错说缺少libaio.so我们安装一下

[root@web mysql]# yum install libaio

[root@web mysql]# scripts/mysql_install_db --user=mysql --datadir=/mydata/data #再次执行mysql 初始化的data存放位置的准备

To start mysqld at boot timeyou have to copy

support-files/mysql.server to the right place foryour system

PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER !

To doso, start the server, thenissue the following commands:

./bin/mysqladmin-u root password 'new-password'

./bin/mysqladmin-u root -h web.test.com password 'new-password'

Alternatively you can run:

./bin/mysql_secure_installation

whichwill also give you the option of removing the test

databases and anonymous user created by default. This is

strongly recommended forproduction servers.

See the manual formoreinstructions.

You can start the MySQL daemon with:

cd. ; ./bin/mysqld_safe&

You can testthe MySQL daemon with mysql-test-run.pl

cdmysql-test; perl mysql-test-run.pl

Please report any problems with the ./bin/mysqlbugscript!

The latest information about MySQL is available on the web at

http://www.mysql.com

Support MySQL by buying support/licensesat http://shop.mysql.com

WARNING: Found existing config file./my.cnf on the system.

Because this filemight be inuse, it was not replaced,

but was used inbootstrap (unless you used --defaults-file)

and when you later start the server.

The new default config filewas created as ./my-new.cnf,

please compare it with your fileand take the changes you need.

WARNING: Default config file/etc/my.cnf exists on the system

This filewill be readby default by the MySQL server

If you donot want to use this, either remove it, or use the

--defaults-fileargument to mysqld_safe when starting the server

[root@web mysql]#

[root@web mysql]# ls /mydata/data/ #查看 data 目录有文件说明初始化成功

ibdata1 ib_logfile0 ib_logfile1 mysql performance_schema test

(3). 初始化完成后mysql中目录文件的属主应改回成root，以免被别人攻破mysql用户密码而带来数据破坏等[root@web mysql]# cd /usr/local/mysql/

[root@web mysql]# chown root /usr/local/mysql/* -R

[root@web mysql]# ll

total 84

drwxr-xr-x 2 root mysql 4096 Jun 29 21:12 bin

-rw-r--r-- 1 root mysql 17987 May 21 23:18 COPYING

drwxr-xr-x 3 root mysql 4096 Jun 29 21:12 data

drwxr-xr-x 2 root mysql 4096 Jun 29 21:12 docs

drwxr-xr-x 3 root mysql 4096 Jun 29 21:12 include

-rw-r--r-- 1 root mysql 7469 May 21 23:18 INSTALL-BINARY

drwxr-xr-x 3 root mysql 4096 Jun 29 21:12 lib

drwxr-xr-x 4 root mysql 4096 Jun 29 21:12 man

-rw-r--r-- 1 root root 943 Jun 29 21:18 my.cnf

-rw-r--r-- 1 root root 943 Jun 29 21:23 my-new.cnf

drwxr-xr-x 10 root mysql 4096 Jun 29 21:12 mysql-test

-rw-r--r-- 1 root mysql 2496 May 21 23:18 README

drwxr-xr-x 2 root mysql 4096 Jun 29 21:12 scripts

drwxr-xr-x 28 root mysql 4096 Jun 29 21:12 share

drwxr-xr-x 4 root mysql 4096 Jun 29 21:12 sql-bench

drwxr-xr-x 3 root mysql 4096 Jun 29 21:12 support-files

[root@web mysql]#

4. 为mysql提供主配置文件

初始化后会自动在当前目录下创建一个my.cnf配置文件，直接修改就可以(在mysql 5.6 以后配置文件自动生成，不需要我们再进行复制)

(1).  查看配置文件[root@web mysql]# ll

total 84

drwxr-xr-x 2 root mysql 4096 Jun 29 21:12 bin

-rw-r--r-- 1 root mysql 17987 May 21 23:18 COPYING

drwxr-xr-x 3 root mysql 4096 Jun 29 21:12 data

drwxr-xr-x 2 root mysql 4096 Jun 29 21:12 docs

drwxr-xr-x 3 root mysql 4096 Jun 29 21:12 include

-rw-r--r-- 1 root mysql 7469 May 21 23:18 INSTALL-BINARY

drwxr-xr-x 3 root mysql 4096 Jun 29 21:12 lib

drwxr-xr-x 4 root mysql 4096 Jun 29 21:12 man

-rw-r--r-- 1 root root 943 Jun 29 21:18 my.cnf

-rw-r--r-- 1 root root 943 Jun 29 21:23 my-new.cnf

drwxr-xr-x 10 root mysql 4096 Jun 29 21:12 mysql-test

-rw-r--r-- 1 root mysql 2496 May 21 23:18 README

drwxr-xr-x 2 root mysql 4096 Jun 29 21:12 scripts

drwxr-xr-x 28 root mysql 4096 Jun 29 21:12 share

drwxr-xr-x 4 root mysql 4096 Jun 29 21:12 sql-bench

drwxr-xr-x 3 root mysql 4096 Jun 29 21:12 support-files

[root@web mysql]#

[root@web mysql]# cat my.cnf

# For advice on how to change settings please see

# http://dev.mysql.com/doc/refman/5.6/en/server-configuration-defaults.html

[mysqld]

# Remove leading # and set to the amount of RAM for the most important data

# cache in MySQL. Start at 70% of total RAM for dedicated server, else 10%.

# innodb_buffer_pool_size = 128M

# Remove leading # to turn on a very important data integrity option: logging

# changes to the binary log between backups.

# log_bin

# These are commonly set, remove the # and set as required.

# basedir = .....

# datadir = .....

# port = .....

# server_id = .....

# socket = .....

# Remove leading # to set options mainly useful for reporting servers.

# The server defaults are faster for transactions and fast SELECTs.

# Adjust sizes as needed, experiment to find the optimal values.

# join_buffer_size = 128M

# sort_buffer_size = 2M

# read_rnd_buffer_size = 2M

sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES

[root@web mysql]#

大家可以看到生成的配置文件很简单，我们得添加一些内容！

(2).  修改配置文件[root@web mysql]# vim my.cnf

添加内容是：

binlog-format=ROW

log-bin=master-bin.log

log-slave-updates=true

gtid-mode=on

enforce-gtid-consistency=true

master-info-repository=TABLE

relay-log-info-repository=TABLE

sync-master-info=1

slave-parallel-workers=2

binlog-checksum=CRC32

master-verify-checksum=1

slave-sql-verify-checksum=1

binlog-rows-query-log_events=1

server-id=1

report-port=3306

port=3306

datadir=/mydata/data

socket=/tmp/mysql.sock

report-host=master.test.com

5. 为mysql提供sysv服务脚本并启动服务[root@web mysql]# cp support-files/mysql.server /etc/init.d/mysqld #复制sysv脚本

[root@web mysql]# chkconfig --add mysqld

[root@web mysql]# chkconfig mysqld on #开机自启动

[root@web mysql]# chkconfig mysqld --list

mysqld 0:off 1:off 2:on 3:on 4:on 5:on 6:off

[root@web mysql]# service mysqld start

Starting MySQL.... SUCCESS!

[root@web mysql]# netstat -ntulp

Active Internet connections (only servers)

Proto Recv-Q Send-Q Local Address Foreign Address State PID/Programname

tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 990/sshd

tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 1066/master

tcp 0 0 :::80 :::* LISTEN 37120/httpd

tcp 0 0 :::22 :::* LISTEN 990/sshd

tcp 0 0 ::1:25 :::* LISTEN 1066/master

tcp 0 0 :::3306 :::* LISTEN 37924/mysqld#mysql启动成功

udp 0 0 0.0.0.0:68 0.0.0.0:* 890/dhclient

6. 输出mysql的man手册至man命令的查找路径[root@web mysql]# vim /etc/man.config

MANPATH /usr/local/mysql/man#增加这一行

7. 输出mysql的头文件至系统头文件路径/usr/include[root@web mysql]# ln -sv /usr/local/mysql/include/ /usr/include/mysql #输出mysql的头文件至系统头文件

`/usr/include/mysql' -> `/usr/local/mysql/include/'

[root@web mysql]# cd /usr/include/mysql/

8. 输出mysql的库文件给系统库查找路径[root@web mysql]# vim /etc/ld.so.conf.d/mysql.conf

/usr/local/mysql/lib

#直接新建编辑/etc/ld.so.conf.d/mysql.conf文件，把mysql的库文件路径添加进去就可以了

[root@web mysql]# ldconfig –v# 让系统重新读取库文件

/usr/local/mysql/lib:

libtcmalloc_minimal.so.0 -> libtcmalloc_minimal.so (changed)

libmysqlclient.so.18 -> libmysqlclient_r.so.18.0.0

/usr/lib64/mysql:

libmysqlclient.so.16 -> libmysqlclient.so.16.0.0

libmysqlclient_r.so.16 -> libmysqlclient_r.so.16.0

9. 修改PATH环境变量，让系统可以直接使用mysql的相关命令[root@web mysql]# vim /etc/profile.d/mysql.sh #添加环境变量(与添加httpd是一样的)

exportPATH=$PATH:/usr/local/mysql/bin

[root@web mysql]# source /etc/profile #重新读取一下环境变量

10. 测试并连接mysql[root@web mysql]# mysql

Welcome to the MySQL monitor. Commands end with ; or \g.

Your MySQL connection idis 1

Server version: 5.6.12-log MySQL Community Server (GPL)

Copyright (c) 2000, 2013, Oracle and/orits affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/orits

affiliates. Other names may be trademarks of their respective

owners.

Type 'help;'or '\h'forhelp. Type '\c'to clearthe current input statement.

mysql> SHOW DATABASES;

+--------------------+

| Database |

+--------------------+

| information_schema |

| mysql |

| performance_schema |

| test|

+--------------------+

4 rows inset(0.02 sec)

mysql>

| mysql |

| performance_schema |

| test |

+--------------------+

4 rows in set (0.03 sec)

mysql>

说明，大家可以看到通用二进制包的安装与配置和源码包的安装配置有很多是相同的，但我这边还是全部写出来了，保证博文的完整性！通用二进制包安装并测试完成，下面我们简单说一下RPM包的安装！

RPM包安装

说明，RPM包安装我想大家都会我在这里就不过多说明,到这里mysql安装讲解全部结束！^_^……