Hadoop pig进阶语法

本文来自与作者阅读 Programming Pig 所做的笔记，转载请注明出处 http://www.cnblogs.com/siwei1988/archive/2012/08/06/2624912.html

。Pig Latin是一种数据流语言，变量的命名规则同java中变量的命名规则，变量名可以复用（不建议这样做，这种情况下相当与新建一个变量，同时删除原来的变量）

A = load 'NYSE_dividends' (exchange, symbol, date, dividends);
A = filter A by dividends > 0;
A = foreach A generate UPPER(symbol);

。注释：--单行注释；/*……*/多行注释；

。Pig Latin关键词不区分大小写，比如load，foreach，但是变量名和udf区分大小写，COUNT是udf，所以不同于count。

。Load 加载数据

默认加载当前用户的home目录（/users/yourlogin），可以在grunt下输入cd 命令更改当前所在目录。

divs = load '/data/examples/NYSE_dividends'

也可以输入完整的文件名

divs = load ‘hdfs://nn.acme.com/data/examples/NYSE_dividends’

默认使用TAB(\t)作为分割符，也可以使用using定义其它的分割符

divs = load 'NYSE_dividends' using PigStorage(',');

注意：只能用一个字符作为分割符

还可以使用using定义其它的加载函数

divs = load 'NYSE_dividends' using HBaseStorage();

as用于定义模式

divs = load 'NYSE_dividends' as (exchange, symbol, date, dividends);

也可以使用通配符加载一个目录下的所有文件，该目录下的所有子目录的文件也会被加载。通配符由hadoop文件系统决定，下面是hadoop 0.20所支持的通配符

glob	comment
?	Matches any single character.
*	Matches zero or more characters.
[abc]	Matches a single character from character set (a,b,c).
[a-z]	Matches a single character from the character range (a..z), inclusive. The first character must be lexicographically less than or equal to the second character.
[^abc]	Matches a single character that is not in the character set (a, b, c). The ^ character must occur immediately to the right of the opening bracket.
[^a-z]	Matches a single character that is not from the character range (a..z) inclusive. The ^ character must occur immediately to the right of the opening bracket.
\c	Removes (escapes) any special meaning of character c.
{ab,cd}	Matches a string from the string set {ab, cd}

。as 定义模式，可用于load ** [as (ColumnName[:type])]，foreach…generate ColumnName [as newColumnName]

。store存储数据，默认用using PigStorage 使用tab作为分割符。

store processed into '/data/examples/processed';

也可以输入完整路径比如hdfs://nn.acme.com/data/examples/processed.

可以使用using调用其它存储函数或其它分割符

store processed into 'processed' usingHBaseStorage();

store processed into 'processed' using PigStorage(',');

注意：数据存储并不是存储为一个文件，而是由reduce进程数决定的多个part文件。

。foreach…generate[*][begin .. end]

*匹配所有，同样适用与udf；

..匹配begin和end之间的部分，包括begin和end

prices = load 'NYSE_daily' as (exchange, symbol, date, open,
high, low, close, volume, adj_close);
beginning = foreach prices generate ..open; -- produces exchange, symbol, date, open
middle    = foreach prices generate open..close; -- produces open, high, low, close
end       = foreach prices generate volume..; -- produces volume, adj_close

一般情况下foreach…generate…重新生成的模式中的数据名和数据类型保持原来的名字和数据类型，但是如果有表达式则不会，可以在generate 变量后使用as关键词定义别名；

divs = load 'NYSE_dividends' as (exchange:chararray, symbol:chararray,date:chararray, dividends:float);
sym  = foreach divs generate symbol;
describe sym;sym: {symbol: chararray}

divs     = load 'NYSE_dividends' as (exchange:chararray, symbol:chararray,date:chararray, dividends:float);
in_cents = foreach divs generate dividends * 100.0 as dividend, dividends * 100.0;
describe in_cents;in_cents: {dividend: double,double}

#用于map查找；.用于tuple（元组）投影；

bball = load 'baseball' as (name:chararray, team:chararray,position:bag{t:(p:chararray)}, bat:map[]);
avg = foreach bball generate bat#'batting_average';

A = load 'input' as (t:tuple(x:int, y:int));
B = foreach A generate t.x, t.$1;

3.获取bag（包）中的数据

A = load 'input' as (b:bag{t:(x:int, y:int)});
B = foreach A generate b.x;

A = load 'input' as (b:bag{t:(x:int, y:int)});
B = foreach A generate b.(x, y);

下面的语句将执行不了

A = load 'foo' as (x:chararray, y:int, z:int);
B = group A by x; -- produces bag A containing all the records for a given value of x
C = foreach B generate SUM(A.y + A.z);

因为A.y 和 A.z都是bag，符号+对于bag不适用。

正确的做法如下

A = load 'foo' as (x:chararray, y:int, z:int);
A1 = foreach A generate x, y + z as yz;
B = group A1 by x;
C = foreach B generate SUM(A1.yz);

。foreach中嵌套其它语句

--distinct_symbols.pig
daily    = load 'NYSE_daily' as (exchange, symbol); -- not interested in other fields
grpd     = group daily by exchange;
uniqcnt  = foreach grpd {sym      = daily.symbol;uniq_sym = distinct sym;generate group, COUNT(uniq_sym);
};

注意:foreach内部只支持distinct, filter, limit, order关键词；最后一句必须是generate；

--double_distinct.pig
divs = load 'NYSE_dividends' as (exchange:chararray, symbol:chararray);
grpd = group divs all;
uniq = foreach grpd {exchanges      = divs.exchange;uniq_exchanges = distinct exchanges;symbols        = divs.symbol;uniq_symbols   = distinct symbols;generate COUNT(uniq_exchanges), COUNT(uniq_symbols);
};

。flatten消除包嵌套关系

--flatten.pig
players = load 'baseball' as (name:chararray, team:chararray,position:bag{t:(p:chararray)}, bat:map[]);
pos     = foreach players generate name, flatten(position) as position;
bypos   = group pos by position;

--flatten_noempty.pig
players = load 'baseball' as (name:chararray, team:chararray,position:bag{t:(p:chararray)}, bat:map[]);
noempty = foreach players generate name,((position is null or IsEmpty(position)) ? {('unknown')} : position)as position;
pos     = foreach noempty generate name, flatten(position) as position;
bypos   = group pos by position;

。filter （注：pig中的逻辑语句同样遵循短路原则）

注意：null == 任何数据

。filter结合matches使用正则表达式（matches前加not表示不匹配）

pig中的正则表达式格式和java中的正则表达所一样，参考 http://docs.oracle.com/javase/6/docs/api/java/util/regex/Pattern.html

各种转义字符，转义字符使用方式：\\后面跟上转义码

点的转义：. ==> u002E
美元符号的转义：$ ==> u0024
乘方符号的转义：^ ==> u005E
左大括号的转义：{ ==> u007B
左方括号的转义：[ ==> u005B
左圆括号的转义：( ==> u0028
竖线的转义：| ==> u007C
右圆括号的转义：) ==> u0029
星号的转义：* ==> u002A
加号的转义：+ ==> u002B
问号的转义：? ==> u003F
反斜杠的转义： ==> u005C

下面的例子查找包括CM.的记录

-- filter_not_matches.pig
divs           = load 'NYSE_dividends' as (exchange:chararray, symbol:chararray,date:chararray, dividends:float);
notstartswithcm = filter divs by not symbol matches '.*CM\\2u002E1.*';

。group之后的数据是一个map，其中key是group所用的键值，value是group针对的变量；

可用()同时对多个变量作group，group…all用于所有变量（注意：使用all时没有by），group之后的变量分为两个部分，第一部分变量名是group（不能更改），第二部是和原始bag模式一样的bag。

--twokey.pig
daily = load 'NYSE_daily' as (exchange, stock, date, dividends);
grpd  = group daily by (exchange, stock);
avg   = foreach grpd generate group, AVG(daily.dividends);
describe grpd;
grpd: {group: (exchange: bytearray,stock: bytearray),daily: {exchange: bytearray,stock: bytearray,date: bytearray,dividends: bytearray}}

--countall.pig
daily = load 'NYSE_daily' as (exchange, stock);
grpd  = group daily all;
cnt   = foreach grpd generate COUNT(daily);

。cogroup对多个变量进行group

注意：所有key值为null的数据都被归为同一类，这一点和group相同，和join不同。

A = load 'input1' as (id:int, val:float);
B = load 'input2' as (id:int, val2:int);
C = cogroup A by id, B by id;
describe C;C: {group: int,A: {id: int,val: float},B: {id: int,val2: int}}

。order by

对单列进行排序

--order.pig
daily   = load 'NYSE_daily' as (exchange:chararray, symbol:chararray,date:chararray, open:float, high:float, low:float, close:float,volume:int, adj_close:float);
bydate  = order daily by date;

对多列进行排序

--order2key.pig
daily          = load 'NYSE_daily' as (exchange:chararray, symbol:chararray,date:chararray, open:float, high:float, low:float,close:float, volume:int, adj_close:float);
bydatensymbol  = order daily by date, symbol;

desc关键词按降序进行排序，null小于所有词

--orderdesc.pig
daily    = load 'NYSE_daily' as (exchange:chararray, symbol:chararray,date:chararray, open:float, high:float, low:float, close:float,volume:int, adj_close:float);
byclose  = order daily by close desc, open;
dump byclose; -- open still sorted in ascending order

。distinct只能去掉整个元组的重复行，不能去掉某几个特定列的重复行

--distinct.pig
-- find a distinct list of ticker symbols for each exchange
-- This load will truncate the records, picking up just the first two fields.
daily   = load 'NYSE_daily' as (exchange:chararray, symbol:chararray);
uniq    = distinct daily;

。join/left join / right join

null不匹配任何数据

-- join2key.pig
daily = load 'NYSE_daily' as (exchange, symbol, date, open, high, low, close,volume, adj_close);
divs  = load 'NYSE_dividends' as (exchange, symbol, date, dividends);
jnd   = join daily by (symbol, date), divs by (symbol, date);

--leftjoin.pig
daily = load 'NYSE_daily' as (exchange, symbol, date, open, high, low, close,volume, adj_close);
divs  = load 'NYSE_dividends' as (exchange, symbol, date, dividends);
jnd   = join daily by (symbol, date) left outer, divs by (symbol, date);

也可以同时多个变量，但只用于inner join

A = load 'input1' as (x, y);
B = load 'input2' as (u, v);
C = load 'input3' as (e, f);
alpha = join A by x, B by u, C by e;

也可以自身和自身join，但数据要加载两次

--selfjoin.pig
-- For each stock, find all dividends that increased between two dates
divs1     = load 'NYSE_dividends' as (exchange:chararray, symbol:chararray,date:chararray, dividends);
divs2     = load 'NYSE_dividends' as (exchange:chararray, symbol:chararray,date:chararray, dividends);
jnd       = join divs1 by symbol, divs2 by symbol;
increased = filter jnd by divs1::date < divs2::date anddivs1::dividends < divs2::dividends;

下面这样不行

--selfjoin.pig
-- For each stock, find all dividends that increased between two dates
divs1     = load 'NYSE_dividends' as (exchange:chararray, symbol:chararray,date:chararray, dividends);
jnd       = join divs1 by symbol, divs1 by symbol;
increased = filter jnd by divs1::date < divs2::date anddivs1::dividends < divs2::dividends;

。union 相当与sql中的union，但与sql不通的是pig中的union可以针对两个不同模式的变量：如果两个变量模式相同，那么union后的变量模式与变量的模式一样；如果一个变量的模式可以由另一各变量的模式强制类型转换，那么union后的变量模式与转换后的变量模式相同；否则，union后的变量没有模式。

A = load 'input1' as (x:int, y:float);
B = load 'input2' as (x:int, y:float);
C = union A, B;
describe C;C: {x: int,y: float}A = load 'input1' as (x:double, y:float);
B = load 'input2' as (x:int, y:double);
C = union A, B;
describe C;C: {x: double,y: double}A = load 'input1' as (x:int, y:float);
B = load 'input2' as (x:int, y:chararray);
C = union A, B;
describe C;Schema for C unknown.
注意：在pig 1.0中 执行不了最后一种union。

注意：union不会剔除重复的行

如果需要对两个具有不通列名的变量union的话，可以使用onschema关键字

A = load 'input1' as (w: chararray, x:int, y:float);
B = load 'input2' as (x:int, y:double, z:chararray);
C = union onschema A, B;
describe C;C: {w: chararray,x: int,y: double,z: chararray}

。cross 相当于离散数学中的叉乘，输入行数分别为m行，n行，输出行数则为m*n行。

--thetajoin.pig
--I recommand running this one on a cluster too
daily   = load 'NYSE_daily' as (exchange:chararray, symbol:chararray,date:chararray, open:float, high:float, low:float,close:float, volume:int, adj_close:float);
divs    = load 'NYSE_dividends' as (exchange:chararray, symbol:chararray,date:chararray, dividends:float);
crossed = cross daily, divs;
tjnd    = filter crossed by daily::date < divs::date;

。limit

--limit.pig
divs    = load 'NYSE_dividends';
first10 = limit divs 10;

在pig中除了order by 之外生成的数据都没有固定的顺序。上面的程序每次生成的数据也是不一样的。

。sample 用于生成测试数据，按指定参数选取部分数据。下面的程序选取10%的数据。

--sample.pig
divs = load 'NYSE_dividends';
some = sample divs 0.1;

。Parallel 设置pig的reduce进程个数

--parallel.pig
daily   = load 'NYSE_daily' as (exchange, symbol, date, open, high, low, close,volume, adj_close);
bysymbl = group daily by symbol parallel 10;

parallel只针对一条语句，如果希望脚本中的所有语句都有10个reduce进程，可以使用 set default_parallel 10命令

--defaultparallel.pig
set default_parallel 10;
daily   = load 'NYSE_daily' as (exchange, symbol, date, open, high, low, close,volume, adj_close);
bysymbl = group daily by symbol;
average = foreach bysymbl generate group, AVG(daily.close) as avg;
sorted  = order average by avg desc;

如果同时使用parallel和set default_parallel，那么parallel中的参数将覆盖set default_parallel

。UDF

注册udf

--register.pig
register 'your_path_to_piggybank/piggybank.jar';
divs      = load 'NYSE_dividends' as (exchange:chararray, symbol:chararray,date:chararray, dividends:float);
backwards = foreach divs generateorg.apache.pig.piggybank.evaluation.string.Reverse(symbol);

定义udf别名

--define.pig
register 'your_path_to_piggybank/piggybank.jar';
define reverse org.apache.pig.piggybank.evaluation.string.Reverse();
divs      = load 'NYSE_dividends' as (exchange:chararray, symbol:chararray,date:chararray, dividends:float);
backwards = foreach divs generate reverse(symbol);

构造函数带参数的udf

--define_constructor_args.pig
register 'acme.jar';
define convert com.acme.financial.CurrencyConverter('dollar', 'euro');
divs      = load 'NYSE_dividends' as (exchange:chararray, symbol:chararray,date:chararray, dividends:float);
backwards = foreach divs generate convert(dividends);

。托管java中的静态函数（效率较低）

--invoker.pig
define hex InvokeForString('java.lang.Integer.toHexString', 'int');
divs  = load 'NYSE_daily' as (exchange, symbol, date, open, high, low,close, volume, adj_close);
nonnull = filter divs by volume is not null;
inhex = foreach nonnull generate symbol, hex((int)volume);

如果函数的参数是一个数组，那么传递过去的是一个bag

define stdev InvokeForDouble('com.acme.Stats.stdev', 'double[]');
A = load 'input' as (id: int, dp:double);
B = group A by id;
C = foreach B generate group, stdev(A.dp);

。multiquery

--multiquery.pig
players    = load 'baseball' as (name:chararray, team:chararray,position:bag{t:(p:chararray)}, bat:map[]);
pwithba    = foreach players generate name, team, position,bat#'batting_average' as batavg;
byteam     = group pwithba by team;
avgbyteam  = foreach byteam generate group, AVG(pwithba.batavg);
store avgbyteam into 'by_team';
flattenpos = foreach pwithba generate name, team,flatten(position) as position, batavg;
bypos      = group flattenpos by position;
avgbypos   = foreach bypos generate group, AVG(flattenpos.batavg);
store avgbypos into 'by_position';

。split

wlogs = load 'weblogs' as (pageid, url, timestamp);
split wlogs into apr03 if timestamp < '20110404',apr02 if timestamp < '20110403' and timestamp > '20110401',apr01 if timestamp < '20110402' and timestamp > '20110331';
store apr03 into '20110403';
store apr02 into '20110402';
store apr01 into '20110401';

。设置pig环境

Parameter	Value Type	Description
debug	string	Sets the logging level to `DEBUG`. Equivalent to passing `-debug DEBUG` on the command line.
default_parallel	integer	Sets a default parallel level for all reduce operations in the script. See the section called “Parallel” for details.
job.name	string	Assigns a name to the Hadoop job. By default the name is the filename of the script being run, or a randomly generated name for interactive sessions.
job.priority	string Type	If your Hadoop cluster is using the Capacity Scheduler with priorities enabled for queues, this allows you to set the priority of your Pig job. Allowed values are `very_low`, `low`, `normal`, `high`, `very_high`.

。parameter 向pig脚本传递参数

--daily.pig
daily     = load 'NYSE_daily' as (exchange:chararray, symbol:chararray,date:chararray, open:float, high:float, low:float, close:float,volume:int, adj_close:float);
yesterday = filter daily by date == '$DATE';
grpd      = group yesterday all;
minmax    = foreach grpd generate MAX(yesterday.high), MIN(yesterday.low);

用-p 传递参数，每个变量前都要加一个-p

pig -p DATE=2009-12-17 daily.pig

参数也可以放在一个文件里，每行一个参数，注释部分以#开头，使用-m 或者 -param_file.调用参数文件

pig脚本

wlogs = load 'clicks/$YEAR$MONTH01' as (url, pageid, timestamp);

参数文件

#Param file
YEAR=2009-
MONTH=12-
DAY=17
DATE=$YEAR$MONTH$DAY

执行

pig -param_file daily.params daily.pig

也可以在pig内定义参数%declare 或者 %default，%default定义默认的参数，在特殊情况下可以被覆盖

注意：%declare和%default不能用于以下位置：

pig脚本，此脚本非Macro宏，并且脚本被另外一个脚本调用（如果不被调用可以使用）

%default parallel_factor 10;
wlogs = load 'clicks' as (url, pageid, timestamp);
grp   = group wlogs by pageid parallel $parallel_factor;
cntd  = foreach grp generate group, COUNT(wlogs);

。定义Macro宏,相当于子函数

--macro.pig
-- Given daily input and a particular year, analyze how
-- stock prices changed on days dividends were paid out.
define dividend_analysis (daily, year, daily_symbol, daily_open, daily_close)
returns analyzed {divs          = load 'NYSE_dividends' as (exchange:chararray,symbol:chararray, date:chararray, dividends:float);divsthisyear  = filter divs by date matches '$year-.*';dailythisyear = filter $daily by date matches '$year-.*';jnd           = join divsthisyear by symbol, dailythisyear by $daily_symbol;$analyzed     = foreach jnd generate dailythisyear::$daily_symbol,$daily_close - $daily_open;
};daily   = load 'NYSE_daily' as (exchange:chararray, symbol:chararray,date:chararray, open:float, high:float, low:float, close:float,volume:int, adj_close:float);
results = dividend_analysis(daily, '2009', 'symbol', 'open', 'close');

。引用pig文件,被引用的文件被执行一遍，相当于拼接在一起，被引用的文件中不能存在自定义变量

--main.pig
import '../examples/ch6/dividend_analysis.pig';daily   = load 'NYSE_daily' as (exchange:chararray, symbol:chararray,date:chararray, open:float, high:float, low:float, close:float,volume:int, adj_close:float);
results = dividend_analysis(daily, '2009', 'symbol', 'open', 'close');

默认搜索文件夹为当前文件夹，可以使用set pig.import.search.path设置搜索的路径

set pig.import.search.path '/usr/local/pig,/grid/pig';
import 'acme/macros.pig';

客

Hadoop pig进阶语法相关推荐

【学习笔记】JS进阶语法一事件进阶
内容整理自<从0到1Javascript快速上手>下半部分-进阶语法篇示例:event对象keyCode属性获取键盘上下左右键 <!DOCTYPE html> <htm ...
【学习笔记】JS进阶语法一事件基础
内容整理自<从0到1Javascript快速上手>下半部分-进阶语法篇示例:键盘松开一瞬间触发的事件 <!DOCTYPE html> <html><hea ...
Hadoop:pig 安装及入门示例
pig是hadoop的一个子项目,用于简化MapReduce的开发工作,可以用更人性化的脚本方式分析数据. 一.安装 a) 下载从官网http://pig.apache.org下载最新版本(目前是0 ...
LaTeX 进阶语法
文章目录 LaTeX进阶语法一. 样式排版 1. 字体和字号 1.1 字体样式 1.2 字号 1.3 ctex宏包更改中文字体 1.4 文字装饰 2. 段落格式和间距 2.1 长度和长度变量 2.2 ...
Go语言入门——进阶语法篇（三）
文章目录进阶语法指针基本指针高级指针指针总结面向对象概述对象类结构体定义与初始化添加方法方法的注意事项类型别名与类型定义的区别工厂函数接口接口声明接口实现空接口 ...
[db] hadoop pig
hadoop && pig Hadoop 最近需要用到hadoop操作,发现hadoop的官网真的良心的,没那么多废话,直接说明白怎么用,而且还是中文的,简单粗暴啊!!! hadoop ...
Vue 进阶语法和生命周期
文章目录 Vue 进阶语法和生命周期 16.Vue:生命周期[了解] 17.Vue:computed计算属性 18.Vue:watch监控属性 Vue 进阶语法和生命周期 a. 每个 Vue 应用都是 ...
02_python进阶语法
python进阶语法一.正则表达式与json 正则表达式正则表达式是一个特殊的字符序列,用于判断一个字符串是否与我们所设定的字符序列匹配可用于快速检索文本,替换文本元字符与普通字符 a = ' ...
hadoop pig
1.1 编写目的介绍pig,一个不得不说的hadoop的扩展. 1.2 什么是pig Pig是一个基于Hadoop的大规模数据分析平台,它提供的SQL-LIKE语言叫Pig Latin,该语言的编译 ...

Hadoop pig进阶语法

Hadoop pig进阶语法相关推荐

最新文章

热门文章