subprocess installed post-installation script returned error exit status 127

手贱删除了/usr/bin/python2.7

然后想重装报错：

subprocess installed post-installation script returned error exit status 127

结局方案[1]:

/var/lib/dpkg/info/python2.7.postinst

然后重新apt install python2.7即可。

----------------------------------------------------------------------------------------------------------------------------------

另外上面路径中的python2.7.list

其实对应于synaptic中的

Reference:

[1]https://askubuntu.com/questions/438345/how-to-remove-install-a-package-that-is-not-fully-installed

subprocess installed post-installation script returned error exit status 127相关推荐

subprocess installed post-installation script returned error exit status 1
subprocess installed post-installation script returned error exit status 1 https://actychen.wordpres ...
【解决】subprocess.CalledProcessError: Command ‘(‘lsb_release‘, ‘-a‘)‘ returned non-zero exit status 127
pip list 报错 Traceback (most recent call last):File "/home/sensetime/.pyenv/versions/3.6.5/bin/p ...
subpress installed post-installation script returned error exit status 1
以下是大神给的解决方案记录,先重现下问题吧: UBUNTU16.04下面出现这个问题: killall mysql dpkg -l|grep mysql dpkg -P 上面列出的所有名字(这个命令的 ...
YOLOv7 训练报错：subprocess.CalledProcessError: Command ‘git tag‘ returned non-zero exit status 127
网上未找到类似错误,记录一下bug的排查过程. 排查流程 1. 尝试直接解决status127错误无果,翻看之前的错误代码发现了如下问题问题:/bin/sh: git 未找到命令解 ...
报错subprocess.CalledProcessError: Command ‘[‘which‘, ‘g++‘]‘ returned non-zero exit status 1.
在安装torch的时候,torch安装成功,但是torch-cluster.torch-sparse等报错 Traceback (most recent call last):File "& ...
subprocess.CalledProcessError: Command '('lsb_release', '-a')' returned non-zero exit status 1.
subprocess.CalledProcessError: Command '('lsb_release', '-a')' returned non-zero exit status 1. 解决方法 ...
出现错误“subprocess.CalledProcessError: Command ‘[‘ninja‘, ‘-v‘]‘ returned non-zero exit status 1”解决方法
这个错误的出现主要是因为pytorch版本大于1.5,可行的解决方法有两个: 1. 将pytorch版本降到1.5以下: 2. 将setup.py中的"cmdclass={'build_ex ...
dev c++ 报错[Error] ld returned 1 exit status 的解决办法
我是个C语言的初学者,在使用dev c++ 编译器时,遇到一个情况:程序是正确的,能够正常的编译和运行,但是运行一次之后再次运行之时就出现了报错[Error] ld returned 1 exit ...
Qt error: collect2: error: ld returned 1 exit status
Ubuntu安装好Qt5.10.0后,新建最简单的项目测试环境是否OK时,出现"error: collect2: error: ld returned 1 exit status" ...

subprocess installed post-installation script returned error exit status 127

subprocess installed post-installation script returned error exit status 127相关推荐

最新文章

热门文章