庖丁解牛之-Android平台RTSP|RTMP播放器设计

背景

我们在做Android平台RTSP或者RTMP播放器开发的时候，需要注意的点非常多，以下，以大牛直播SDK(官方)的接口为例，大概介绍下相关接口设计：

接口设计

1. Open() 接口

Open接口的目的，主要是创建实例，正常返回player实例句柄，如有多路播放诉求，创建多个实例即可。

 /*** Initialize Player(启动播放实例)** @param ctx: get by this.getApplicationContext()** <pre>This function must be called firstly.</pre>** @return player handle if successful, if return 0, which means init failed. */public native long SmartPlayerOpen(Object ctx);

2. Close()接口

Close接口，和Open()接口对应，负责释放相应实例的资源，调用Close()接口后，记得实例句柄置0即可。

注意：比如一个实例既可以实现播放，又可同时录像，亦或拉流（转发），这种情况下，调Close()接口时，需要确保录像、拉流都正常停止后，再调用。

/*** 关闭播放实例，结束时必须调用close接口释放资源** @param handle: return value from SmartPlayerOpen()** <pre> NOTE: it could not use player handle after call this function. </pre> ** @return {0} if successful*/public native int SmartPlayerClose(long handle);

3. 网络状态回调

一个好的播放器，好的状态回调必不可少，比如网络连通状态、快照、录像状态、当前下载速度等实时反馈，可以让上层开发者更好的掌控播放端状态，给用户更好的播放体验。

 /*** Set callback event(设置事件回调)** @param handle: return value from SmartPlayerOpen()** @param callbackv2: callback function** @return {0} if successful*/public native int SetSmartPlayerEventCallbackV2(long handle, NTSmartEventCallbackV2 callbackv2);

demo实现实例：

    class EventHandeV2 implements NTSmartEventCallbackV2 {@Overridepublic void onNTSmartEventCallbackV2(long handle, int id, long param1,long param2, String param3, String param4, Object param5) {//Log.i(TAG, "EventHandeV2: handle=" + handle + " id:" + id);String player_event = "";switch (id) {case NTSmartEventID.EVENT_DANIULIVE_ERC_PLAYER_STARTED:player_event = "开始..";break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PLAYER_CONNECTING:player_event = "连接中..";break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PLAYER_CONNECTION_FAILED:player_event = "连接失败..";break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PLAYER_CONNECTED:player_event = "连接成功..";break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PLAYER_DISCONNECTED:player_event = "连接断开..";break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PLAYER_STOP:player_event = "停止播放..";break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PLAYER_RESOLUTION_INFO:player_event = "分辨率信息: width: " + param1 + ", height: " + param2;break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PLAYER_NO_MEDIADATA_RECEIVED:player_event = "收不到媒体数据，可能是url错误..";break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PLAYER_SWITCH_URL:player_event = "切换播放URL..";break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PLAYER_CAPTURE_IMAGE:player_event = "快照: " + param1 + " 路径：" + param3;if (param1 == 0) {player_event = player_event + ", 截取快照成功";} else {player_event = player_event + ", 截取快照失败";}break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PLAYER_RECORDER_START_NEW_FILE:player_event = "[record]开始一个新的录像文件 : " + param3;break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PLAYER_ONE_RECORDER_FILE_FINISHED:player_event = "[record]已生成一个录像文件 : " + param3;break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PLAYER_START_BUFFERING:Log.i(TAG, "Start Buffering");break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PLAYER_BUFFERING:Log.i(TAG, "Buffering:" + param1 + "%");break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PLAYER_STOP_BUFFERING:Log.i(TAG, "Stop Buffering");break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PLAYER_DOWNLOAD_SPEED:player_event = "download_speed:" + param1 + "Byte/s" + ", "+ (param1 * 8 / 1000) + "kbps" + ", " + (param1 / 1024)+ "KB/s";break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PLAYER_RTSP_STATUS_CODE:Log.e(TAG, "RTSP error code received, please make sure username/password is correct, error code:" + param1);player_event = "RTSP error code:" + param1;break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PLAYER_NEED_KEY:Log.e(TAG, "RTMP加密流，请设置播放需要的Key..");player_event = "RTMP加密流，请设置播放需要的Key..";break;case NTSmartEventID.EVENT_DANIULIVE_ERC_PLAYER_KEY_ERROR:Log.e(TAG, "RTMP加密流，Key错误，请重新设置..");player_event = "RTMP加密流，Key错误，请重新设置..";break;}if (player_event.length() > 0) {Log.i(TAG, player_event);Message message = new Message();message.what = PLAYER_EVENT_MSG;message.obj = player_event;handler.sendMessage(message);}}}

4. 软解码还是硬解码？

随着Android发展越来越好，各个厂商芯片对硬解码的支持，也越来越友好，一般情况下，如果适合通用的产品，在设备性能保障的情况下，优先建议软解，如果特定机型设备，可酌情考虑硬解，硬解码，又分为264硬解、HEVC硬解，直接设置surface模式的硬解，接口如下：

 /*** Set Video H.264 HW decoder(设置H.264硬解码)** @param handle: return value from SmartPlayerOpen()** @param isHWDecoder: 0: software decoder; 1: hardware decoder.** @return {0} if successful*/public native int SetSmartPlayerVideoHWDecoder(long handle, int isHWDecoder);/*** Set Video H.265(hevc) HW decoder(设置H.265硬解码)** @param handle: return value from SmartPlayerOpen()** @param isHevcHWDecoder: 0: software decoder; 1: hardware decoder.** @return {0} if successful*/public native int SetSmartPlayerVideoHevcHWDecoder(long handle, int isHevcHWDecoder);

设置surface模式的硬解：

 /*** 设置视频硬解码下Mediacodec自行绘制模式（此种模式下，硬解码兼容性和效率更好，回调YUV/RGB和快照功能将不可用）** @param handle: return value from SmartPlayerOpen()** @param isHWRenderMode: 0: not enable; 1: 用SmartPlayerSetSurface设置的surface自行绘制** @return {0} if successful*/public native int SmartPlayerSetHWRenderMode(long handle, int isHWRenderMode);/*** 更新硬解码surface** @param handle: return value from SmartPlayerOpen()** @return {0} if successful*/public native int SmartPlayerUpdateHWRenderSurface(long handle);

5. 音频输出类型

音频输出，android平台支持audiotrack模式和opensl es模式，一般来说，考虑到设备通用性，建议采用audiotrack模式。

 /*** Set AudioOutput Type(设置audio输出类型)** @param handle: return value from SmartPlayerOpen()** @param use_audiotrack:** <pre> NOTE: if use_audiotrack with 0: it will use auto-select output devices; if with 1: will use audio-track mode. </pre>** @return {0} if successful*/public native int SmartPlayerSetAudioOutputType(long handle, int use_audiotrack);

6. 缓冲时间设置

缓冲时间，顾名思义，缓存多少数据才开始播放，比如设置2000ms的buffer time，直播模式下，收到2秒数据后，才正常播放。

加大buffer time，会增大播放延迟，好处是，网络抖动的时候，流畅性更好。

 /*** Set buffer(设置缓冲时间，单位:毫秒)** @param handle: return value from SmartPlayerOpen()** @param buffer:** <pre> NOTE: Unit is millisecond, range is 0-5000 ms </pre>** @return {0} if successful*/public native int SmartPlayerSetBuffer(long handle, int buffer);

7. 实时静音、实时音量调节

实时静音、实时音量调节顾名思义，播放端可以实时调整播放音量，或者直接静音掉，特别是多路播放场景下，非常有必要。

此外我们还提供了音量放大的功能，支持放大至原始音量的2倍。

 /*** Set mute or not(设置实时静音)** @param handle: return value from SmartPlayerOpen()** @param is_mute: if with 1:mute, if with 0: does not mute** @return {0} if successful*/public native int SmartPlayerSetMute(long handle, int is_mute);/*** 设置播放音量** @param handle: return value from SmartPlayerOpen()** @param volume: 范围是[0, 100], 0是静音，100是最大音量, 默认是100** @return {0} if successful*/public native int SmartPlayerSetAudioVolume(long handle, int volume);

8. RTSP TCP-UDP模式设置、超时时间设置或模式切换

有的RTSP服务器或摄像机，只支持RTSP TCP模式或者UDP模式，这个时候，默认设置TCP、UDP模式就至关重要，此外，我们还设计支持如TCP或UDP模式收不到数据，在超时时间后，可以自动切换到UDP或TCP。

 /*** 设置RTSP TCP/UDP模式(默认UDP模式)** @param handle: return value from SmartPlayerOpen()** @param is_using_tcp: if with 1, it will via TCP mode, while 0 with UDP mode** @return {0} if successful*/public native int SmartPlayerSetRTSPTcpMode(long handle, int is_using_tcp);/*** 设置RTSP超时时间, timeout单位为秒，必须大于0** @param handle: return value from SmartPlayerOpen()** @param timeout: RTSP timeout setting** @return {0} if successful*/public native int SmartPlayerSetRTSPTimeout(long handle, int timeout);/*** 设置RTSP TCP/UDP自动切换** @param handle: return value from SmartPlayerOpen()** NOTE: 对于RTSP来说，有些可能支持rtp over udp方式，有些可能支持使用rtp over tcp方式.* 为了方便使用，有些场景下可以开启自动尝试切换开关, 打开后如果udp无法播放，sdk会自动尝试tcp, 如果tcp方式播放不了,sdk会自动尝试udp.** @param is_auto_switch_tcp_udp 如果设置1的话, sdk将在tcp和udp之间尝试切换播放，如果设置为0，则不尝试切换.** @return {0} if successful*/public native int SmartPlayerSetRTSPAutoSwitchTcpUdp(long handle, int is_auto_switch_tcp_udp);

9. 快速启动

快速启动，主要是针对服务器缓存GOP的场景下，快速刷到最新的数据，确保画面的持续性。

 /*** Set fast startup(设置快速启动模式，此模式针对服务器缓存GOP的场景有效)** @param handle: return value from SmartPlayerOpen()** @param is_fast_startup: if with 1, it will second play back, if with 0: does not it** @return {0} if successful*/public native int SmartPlayerSetFastStartup(long handle, int is_fast_startup);

10. 低延迟模式

低延迟模式下，设置buffer time为0，延迟更低，适用于比如需要操控控制的超低延迟场景下。

 /*** Set low latency mode(设置低延迟模式)** @param handle: return value from SmartPlayerOpen()** @param mode: if with 1, low latency mode, if with 0: normal mode** @return {0} if successful*/public native int SmartPlayerSetLowLatencyMode(long handle, int mode);

11. 视频view旋转、水平|垂直翻转

接口主要用于，比如原始的视频倒置等场景下，设备端无法调整时，通过播放端完成图像的正常角度播放。

 /*** 设置视频垂直反转** @param handle: return value from SmartPlayerOpen()** @param is_flip： 0: 不反转, 1: 反转** @return {0} if successful*/public native int SmartPlayerSetFlipVertical(long handle, int is_flip);/*** 设置视频水平反转** @param handle: return value from SmartPlayerOpen()** @param is_flip： 0: 不反转, 1: 反转** @return {0} if successful*/public native int SmartPlayerSetFlipHorizontal(long handle, int is_flip);/*** 设置顺时针旋转, 注意除了0度之外， 其他角度都会额外消耗性能** @param handle: return value from SmartPlayerOpen()** @param degress： 当前支持 0度，90度, 180度, 270度 旋转** @return {0} if successful*/public native int SmartPlayerSetRotation(long handle, int degress);

12. 设置实时回调下载速度

调用实时下载速度接口，通过设置下载速度时间间隔，和是否需要上报当前下载速度，实现APP层和底层SDK更友好的交互。

 /*** Set report download speed(设置实时回调下载速度)** @param handle: return value from SmartPlayerOpen()** @param is_report: if with 1, it will report download speed, it with 0: does not it.** @param report_interval: report interval, unit is second, it must be greater than 0.** @return {0} if successful*/public native int SmartPlayerSetReportDownloadSpeed(long handle, int is_report, int report_interval );

13. 实时快照

简单来说，播放过程中，是不是要存取当前的播放画面。

 /*** Set if needs to save image during playback stream(是否启动快照功能)** @param handle: return value from SmartPlayerOpen()** @param is_save_image: if with 1, it will save current image via the interface of SmartPlayerSaveCurImage(), if with 0: does not it** @return {0} if successful*/public native int SmartPlayerSaveImageFlag(long handle, int is_save_image);/*** Save current image during playback stream(实时快照)** @param handle: return value from SmartPlayerOpen()** @param imageName: image name, which including fully path, "/sdcard/daniuliveimage/daniu.png", etc.** @return {0} if successful*/public native int SmartPlayerSaveCurImage(long handle, String imageName);

14. 扩展录像操作

播放端录像，我们做的非常细化，比如可以只录制音频或者只录制视频，设置录像存储路径，设置单个文件size，如果非AAC数据，可以转AAC后再录像。

 /*** Create file directory(创建录像目录)** @param path,  E.g: /sdcard/daniulive/rec** <pre> The interface is only used for recording the stream data to local side. </pre>** @return {0} if successful*/public native int SmartPlayerCreateFileDirectory(String path);/*** Set recorder directory(设置录像目录)** @param handle: return value from SmartPlayerOpen()** @param path: the directory of recorder file** <pre> NOTE: make sure the path should be existed, or else the setting failed. </pre>** @return {0} if successful*/public native int SmartPlayerSetRecorderDirectory(long handle, String path);/*** Set the size of every recorded file(设置单个录像文件大小，如超过设定大小则自动切换到下个文件录制)** @param handle: return value from SmartPlayerOpen()** @param size: (MB), (5M~500M), if not in this range, set default size with 200MB.** @return {0} if successful*/public native int SmartPlayerSetRecorderFileMaxSize(long handle, int size);/** 设置录像时音频转AAC编码的开关** @param handle: return value from SmartPlayerOpen()** aac比较通用，sdk增加其他音频编码(比如speex, pcmu, pcma等)转aac的功能.** @param is_transcode: 设置为1的话，如果音频编码不是aac，则转成aac，如果是aac，则不做转换. 设置为0的话，则不做任何转换. 默认是0.** 注意: 转码会增加性能消耗** @return {0} if successful*/public native int SmartPlayerSetRecorderAudioTranscodeAAC(long handle, int is_transcode);/**设置是否录视频，默认的话，如果视频源有视频就录，没有就没得录, 但有些场景下可能不想录制视频，只想录音频，所以增加个开关**@param is_record_video: 1 表示录制视频, 0 表示不录制视频, 默认是1** @return {0} if successful*/public native int SmartPlayerSetRecorderVideo(long handle, int is_record_video);/**设置是否录音频，默认的话，如果视频源有音频就录，没有就没得录, 但有些场景下可能不想录制音频，只想录视频，所以增加个开关**@param is_record_audio: 1 表示录制音频, 0 表示不录制音频, 默认是1** @return {0} if successful*/public native int SmartPlayerSetRecorderAudio(long handle, int is_record_audio);

 /*** Start recorder stream(开始录像)** @param handle: return value from SmartPlayerOpen()** @return {0} if successful*/public native int SmartPlayerStartRecorder(long handle);/*** Stop recorder stream(停止录像)** @param handle: return value from SmartPlayerOpen()** @return {0} if successful*/public native int SmartPlayerStopRecorder(long handle);

15. 拉流回调编码后的数据（配合转发模块使用）

拉流回调编码后的数据，主要是为了配合转发模块使用，比如拉取rtsp流数据，直接转RTMP推送到RTMP服务。

 /** 设置拉流时音频转AAC编码的开关** @param handle: return value from SmartPlayerOpen()** aac比较通用，sdk增加其他音频编码(比如speex, pcmu, pcma等)转aac的功能.** @param is_transcode: 设置为1的话，如果音频编码不是aac，则转成aac, 如果是aac，则不做转换. 设置为0的话，则不做任何转换. 默认是0.* 注意: 转码会增加性能消耗** @return {0} if successful*/public native int SmartPlayerSetPullStreamAudioTranscodeAAC(long handle, int is_transcode);/*** Start pull stream(开始拉流，用于数据转发，只拉流不播放)** @param handle: return value from SmartPlayerOpen()** @return {0} if successful*/public native int SmartPlayerStartPullStream(long handle);/*** Stop pull stream(停止拉流)** @param handle: return value from SmartPlayerOpen()** @return {0} if successful*/public native int SmartPlayerStopPullStream(long handle);

 /*** Set Audio Data Callback(设置回调编码后音频数据)** @param handle: return value from SmartPlayerOpen()** @param audio_data_callback: Audio Data Callback.** @return {0} if successful*/public native int SmartPlayerSetAudioDataCallback(long handle, Object audio_data_callback);/*** Set Video Data Callback(设置回调编码后视频数据)** @param handle: return value from SmartPlayerOpen()** @param video_data_callback: Video Data Callback.** @return {0} if successful*/public native int SmartPlayerSetVideoDataCallback(long handle, Object video_data_callback);

16. H264用户数据回调或SEI数据回调

如发送端在264编码时，加了自定义的user data数据，可以通过以下接口实现数据回调，如需直接回调SEI数据，调下面SEI回调接口即可。

 /*** Set user data Callback(设置回调SEI扩展用户数据)** @param handle: return value from SmartPlayerOpen()** @param user_data_callback: user data callback.** @return {0} if successful*/public native int SmartPlayerSetUserDataCallback(long handle, Object user_data_callback);/*** Set SEI data Callback(设置回调SEI数据)** @param handle: return value from SmartPlayerOpen()** @param sei_data_callback: sei data callback.** @return {0} if successful*/public native int SmartPlayerSetSEIDataCallback(long handle, Object sei_data_callback);

17. 设置回调解码后YUV、RGB数据

如需对解码后的yuv或rgb数据，进行二次处理，如人脸识别等，可以通回调yuv rgb接口实现数据二次处理。

以YUV为例：

    class I420ExternalRender implements NTExternalRender {// public static final int NT_FRAME_FORMAT_RGBA = 1;// public static final int NT_FRAME_FORMAT_ABGR = 2;// public static final int NT_FRAME_FORMAT_I420 = 3;private int width_ = 0;private int height_ = 0;private int y_row_bytes_ = 0;private int u_row_bytes_ = 0;private int v_row_bytes_ = 0;private ByteBuffer y_buffer_ = null;private ByteBuffer u_buffer_ = null;private ByteBuffer v_buffer_ = null;@Overridepublic int getNTFrameFormat() {Log.i(TAG, "I420ExternalRender::getNTFrameFormat return "+ NT_FRAME_FORMAT_I420);return NT_FRAME_FORMAT_I420;}@Overridepublic void onNTFrameSizeChanged(int width, int height) {width_ = width;height_ = height;y_row_bytes_ = (width_ + 15) & (~15);u_row_bytes_ = ((width_ + 1) / 2 + 15) & (~15);v_row_bytes_ = ((width_ + 1) / 2 + 15) & (~15);y_buffer_ = ByteBuffer.allocateDirect(y_row_bytes_ * height_);u_buffer_ = ByteBuffer.allocateDirect(u_row_bytes_* ((height_ + 1) / 2));v_buffer_ = ByteBuffer.allocateDirect(v_row_bytes_* ((height_ + 1) / 2));Log.i(TAG, "I420ExternalRender::onNTFrameSizeChanged width_="+ width_ + " height_=" + height_ + " y_row_bytes_="+ y_row_bytes_ + " u_row_bytes_=" + u_row_bytes_+ " v_row_bytes_=" + v_row_bytes_);}@Overridepublic ByteBuffer getNTPlaneByteBuffer(int index) {if (index == 0) {return y_buffer_;} else if (index == 1) {return u_buffer_;} else if (index == 2) {return v_buffer_;} else {Log.e(TAG, "I420ExternalRender::getNTPlaneByteBuffer index error:" + index);return null;}}@Overridepublic int getNTPlanePerRowBytes(int index) {if (index == 0) {return y_row_bytes_;} else if (index == 1) {return u_row_bytes_;} else if (index == 2) {return v_row_bytes_;} else {Log.e(TAG, "I420ExternalRender::getNTPlanePerRowBytes index error:" + index);return 0;}}public void onNTRenderFrame(int width, int height, long timestamp) {if (y_buffer_ == null)return;if (u_buffer_ == null)return;if (v_buffer_ == null)return;y_buffer_.rewind();u_buffer_.rewind();v_buffer_.rewind();/*if ( !is_saved_image ){is_saved_image = true;int y_len = y_row_bytes_*height_;int u_len = u_row_bytes_*((height_+1)/2);int v_len = v_row_bytes_*((height_+1)/2);int data_len = y_len + (y_row_bytes_*((height_+1)/2));byte[] nv21_data = new byte[data_len];byte[] u_data = new byte[u_len];byte[] v_data = new byte[v_len];y_buffer_.get(nv21_data, 0, y_len);u_buffer_.get(u_data, 0, u_len);v_buffer_.get(v_data, 0, v_len);int[] strides = new int[2];strides[0] = y_row_bytes_;strides[1] = y_row_bytes_;int loop_row_c = ((height_+1)/2);int loop_c = ((width_+1)/2);int dst_row = y_len;int src_v_row = 0;int src_u_row = 0;for ( int i = 0; i < loop_row_c; ++i){int dst_pos = dst_row;for ( int j = 0; j <loop_c; ++j ){nv21_data[dst_pos++] = v_data[src_v_row + j];nv21_data[dst_pos++] = u_data[src_u_row + j];}dst_row   += y_row_bytes_;src_v_row += v_row_bytes_;src_u_row += u_row_bytes_;}String imagePath = "/sdcard" + "/" + "testonv21" + ".jpeg";Log.e(TAG, "I420ExternalRender::begin test save iamge++ image_path:" + imagePath);try{File file = new File(imagePath);FileOutputStream image_os = new FileOutputStream(file);YuvImage image = new YuvImage(nv21_data, ImageFormat.NV21, width_, height_, strides);image.compressToJpeg(new android.graphics.Rect(0, 0, width_, height_), 50, image_os);image_os.flush();image_os.close();}catch(IOException e){e.printStackTrace();}Log.e(TAG, "I420ExternalRender::begin test save iamge--");}*/Log.i(TAG, "I420ExternalRender::onNTRenderFrame w=" + width + " h=" + height + " timestamp=" + timestamp);// copy buffer// test// byte[] test_buffer = new byte[16];// y_buffer_.get(test_buffer);// Log.i(TAG, "I420ExternalRender::onNTRenderFrame y data:" + bytesToHexString(test_buffer));// u_buffer_.get(test_buffer);// Log.i(TAG, "I420ExternalRender::onNTRenderFrame u data:" + bytesToHexString(test_buffer));// v_buffer_.get(test_buffer);// Log.i(TAG, "I420ExternalRender::onNTRenderFrame v data:" + bytesToHexString(test_buffer));}}

18. 设置视频画面填充模式

设置视频画面的填充模式，如填充整个view、等比例填充view，如不设置，默认填充整个view。

19. 设置SurfaceView模式下render类型

format: 0: RGB565格式，如不设置，默认此模式; 1: ARGB8888格式

 /*** 设置SurfaceView模式下(NTRenderer.CreateRenderer第二个参数传false的情况)，render类型** @param handle: return value from SmartPlayerOpen()** @param format: 0: RGB565格式，如不设置，默认此模式; 1: ARGB8888格式** @return {0} if successful*/public native int SmartPlayerSetSurfaceRenderFormat(long handle, int format);

20. 设置surfaceview模式下抗锯齿

需要注意的是：抗锯齿模式开启后，会增加性能消耗。

 /*** 设置SurfaceView模式下(NTRenderer.CreateRenderer第二个参数传false的情况)，抗锯齿效果，注意：抗锯齿模式开启后，可能会影像性能，请慎用** @param handle: return value from SmartPlayerOpen()** @param isEnableAntiAlias: 0: 如不设置，默认不开启抗锯齿模式; 1: 开启抗锯齿模式** @return {0} if successful*/public native int SmartPlayerSetSurfaceAntiAlias(long handle, int isEnableAntiAlias);

总结

以上就是Android平台RTSP、RTMP播放器接口设计需要参考的点，对于大多数开发者来说，不一定需要实现上述所有部分，只要按照产品诉求，实现其中的40%就足够满足特定场景使用了。

一个好的播放器，特别是要满足低延迟稳定的播放（毫秒级延迟），需要注意的点远不止如此，感兴趣的开发者，可以参考blog其他文章。